In this paper, the fixed-time stabilization problem for a class of uncertain chained system is addressed by using a novel nonsingular recursive terminal sliding mode control approach. A fixed-time controller and an adaptive law are designed to guarantee the uncertain chained form system both Lyapunov stable and fixed-time convergent within the settling time. The advantage of the controller based on the sliding mode is that the settling time does not depend on the system initial state. Furthermore, we use RBF neural network to estimate the uncertainty of the system. Finally, the simulation results demonstrate the performance of the control laws.

This paper focuses on the problem of finite-time stabilization of homogeneous, non-Lipschitz systems with dilations. A key contribution of this paper is the design of a virtual recursive Hölder, non-Lipschitz state feedback which renders the non-Lipschitz systems in the special case dominated by a lower-triangular nonlinear system, finite-time stable. The proof is based on a recursive design algorithm developed recently, to construct the virtual Hölder continuous, finite-time stabilizer as well as a C¹ positive definite and proper Lyapunov function that guarantees finite-time stability of the non-Lipschitz non-linear systems.

This paper aims to introduce the notions of various types of Qc-contractions for which we establish some fixed circle and fixed disc theorems in the setting of metric spaces. Some illustrative examples are also provided to support our results. Moreover, we present some fixed circle and fixed disc results of integral type contractive self-mappings.

In this paper, a class of coupled competitive neural networks, which subject to disturbance and discontinuous activation functions, is concerned. To realize the fixed-time quasi-bipartite synchronization, an aperiodic intermittent controller is initially designed. Subsequently, by combining the fixed-time stability theory and nonsmooth analysis, several criteria are established to ensure the bipartite synchronization in fixed time. Moreover, synchronization error bounds and settling time estimates are provided. Finally, numerical simulations are presented to verify the main results.

Drying grains in a fixed bed can be an interesting alternative to prevent undesirable breaks and fractures of solids due to mechanical shocks, something that cannot be avoided when drying in moving beds. A disadvantage of fixed bed drying is that there can be significant gradients in the critical variables if the layer of particulate solids is thick. This work shows that periodically changing the direction of drying air flow is an effective technique to reduce differences within the bed and allow better uniformity of the product. Drying in a thick layer of 10 cm of sorghum grains was carried out at 50 and 60oC for air flow velocity of 2.1 m.s-1. The results showed that despite increasing the total drying time, the technique actually allowed a significant decrease in the temperature gradients and moisture content of the sorghum grains. The change in direction of the air flow caused the drying front to be displaced, sometimes towards the top, sometimes towards the base of the bed. At 50oC, drying lasted a total of 240 min, bringing the sorghum grains to an average overall moisture content of 0.13 on a dry basis.

In this article, we introduce a relatively new concept of multi-valued (θ;R)-contractions and utilize the same to prove some xed point results for a new class of multi-valued mappings in metric spaces endowed with an amorphous binary relation. Illustrative examples are also provided to exhibit the utility of our results proved herein. Finally, we utilize some of our results to investigate the existence and uniqueness of a positive solution for the integral equation of Volterra type.

The purpose of this article is to characterize the Caristi type mapping by the absolute derivative. The equivalences of the Caristi mapping with contraction mapping is discussed too. In addition, it was shown that the contraction mapping can be characterized by its absolute derivative.

In this paper, the notion of θ∗-weak contraction is introduced, which is utilized to prove some fixed point results. These results are helpful to give a positive response to certain open question raised by Kannan [Amer. Math. Monthly 76:1969] and Rhoades [Contemp. Math. 72:1988] on the existence of contractive definition which does not force the mapping to be continuous at the fixed point. Some illustrative examples are also given to support our results. As applications of our result, we investigate the existence and uniqueness of a solution of non-linear matrix equations and integral equations of Volterra type as well.

Oncological patients need the proper doses of medications to facilitate their recovery. The two basic approaches used in dosing Monoclonal Antibodies (mAbs) are fixed-dose combination and variable dosing. In Fixed-Dose Combination Drugs (FDCs), two or more active components are combined in a single formulation at a predetermined dose. Variable dosage, which has long been the industry standard, is the polar opposite of this approach. The body changes over time; the Body Surface Area (BSA) in square meters is often used as a Measure (m2). This study uses a systematic review. Most mAbs used in oncology are predominantly given as cytotoxic anticancer drugs using body-size-based (variable) regimens. Despite the benefits of fixed-dose, variable dosing has become the industry standard, despite being criticized for ineffectiveness. While variable dosing has some advantages, the prevalent view is that continuous dosing has significant advantages based on the balance of probabilities. After assessing each alternative, including its benefits and drawbacks, history of use, and suitability in the current context, fixed dosing emerges as a viable option.

In this paper, it is proved that s-iteration with error and Picard-Mann iteration with error iterative processes converge strongly to the unique fixed point of Lipschitzian strongly pseudo-contractive map. This convergence is almost -stable and -stable. Applications of these results to the operator equations, where is a strongly accretive and accretive mappings of into itself.

We introduce the notion of generalized contraction on dualistic partial metric spaces. A fixed point theorem for mappings satisfying above mentioned contraction is obtained. Some consequences of our result are obtained. We construct an example to demonstrate the effectiveness of our result among the corresponding results in partial metric spaces. Our results provide substantial generalizations and improvements of several well known results existing in the comparable literature. We discuss an application of our fixed point results to show the existence of solution of functional equations.

In estimating logistic regression models, convergence of the maximization algorithm is critical, however, this may fail. Numerous bias correction methods for maximum likelihood estimates of the parameters have been conducted for cases of complete data sets and also longitudinal models. For binary response fixed effects panel data model, the conditional logit estimator is consistent for balanced data. When faced with missing covariates problem, researchers opt for various imputation techniques to make the data complete and without loss of generality consistent estimates still suffice asymptotically. For maximum likelihood estimates of the parameters for logistic regression in cases of imputed covariates, the optimal choice of an imputation technique which yields the best estimates with minimum variance is still elusive. The main aim of this paper is to examine the behaviour of the Hessian matrix with optimal values of the imputed covariates vector which will make the Newton-Raphson algorithm to converge faster through a reduced absolute value of the product of the score function and the inverse fisher information component. We focus on a method used to modify the conditional likelihood function through partitioning of the covariate matrix. We also confirm from the moduli of the Hessian matrices that the log likelihood of a panel data logistic model has a global maximum as the parameter estimates. Simulation results reveal that model based simulation perform better than classical imputation techniques yielding estimates with smaller bias and higher precision for the conditional maximum likelihood estimation of nonlinear panel models with single fixed effects.

Molecular diagnostics in healthcare relies increasingly on genomic and transcriptomic method-ologies and requires appropriate tissue specimens from which nucleic acids (NA) of sufficiently high quality can be obtained. Besides suration of ischemia and fixation type, NA quality depends on a variety of other pre-analytical parameters, like storage conditions and duration. It has been discussed that improper dehydration of tissue during processing influences quality of NAs and shelf-life of fixed tissue. Here we report on establishing a method to determine the amount of residual water in fixed, paraffin-embedded tissue (fixed by neutral buffered formalin, or a non-crosslinking fixative) and its correlation to the performance of NAs in qRT-PCR analyses. The amount of residual water depended primarily on the fixative type and the dehydration pro-tocol and, to a lesser extent on storage conditions and time. Moreover, we found that these pa-rameters were associated with the qRT-PCR performance of extracted NAs. Besides cross-linking of NAs and modification of nucleobases by formalin, hydrolysis of NAs by residual water was found to contribute to reduced qRT-PCR performance. The negative effects of residual water on NA stability are not only important for the design and interpretation of research, but must also be taken into account in clinical diagnostics where reanalysis of archived tissue from a primary tumour may be required, e.g., after disease recurrence. We conclude that improving shelf-life of fixed tissue requires meticulous dehydration and dry storage to minimize the degradative in-fluence of residual water on NAs.

In this paper, inspired by Jleli and Samet [journal of inequalities and applications 38 (2014) 2 1–8] we introduce two new classes of auxiliary functions and utilize the same to define (q, y)R-weak 3 contractions. Utilizing (q, y)R-weak contractions, we prove some fixed point theorems in the setting 4 of relational metric spaces. We employ some examples to substantiate the utility of our newly proved 5 results. Finally, we apply one of our newly proved results to ensure the existence and uniqueness of 6 solution of a Volterra-type integral equation.

A common reactor type in the chemical and process industry is the fixed-bed reactor. Accurate modeling can be achieved with particle-resolved Computational Fluid Dynamic (CFD) simulations. However, the underlying bed morphology plays a paramount role. Synthetic bed-generation methods are much more flexible and faster than image-based approaches. In this study, we look critically at the two different bed generation methods: Discrete Element Method (DEM) (in the commercial software STAR-CCM+) and the rigid-body model (in the open-source software Blender). The two approaches are compared in terms of synthetically generated beds with experimental data of overall and radial porosity, particle orientation, as well as radial velocities. Both models show accurate agreement for the porosity. However, only Blender shows similar particle orientation than the experimental results. The main drawback of the DEM is the long calculation time and the shape approximation with composite particles.

Due to the retrognathic mandible, an orthodontist frequently observes skeletal class II malocclusion in growing patients. The preferred technique for analyzing and monitoring the temporomandibular joint alterations caused by the functional device is magnetic resonance imaging [MRI]. The study aimed to assess and compare changes in the articular disc's dimension and location before and following the use of various class II correctors to correct the class II molar relation using MRI technology. Methods: 39 adolescent patients aged 15-23 years old [24 girls and 15 boys] who were diagnosed with skeletal Class II division 1 malocclusion based on clearly defined criteria underwent treatment with either the power scope II [PS], Sabbagh Advanced Repositioning Appliance [SARA] and or Dynaflex [DF] with fixed appliances. For fixed functional treatment, the average length of treatment was 5-7 months. The changes in the articular disc dimension and position and condylar position were assessed. The study was done at the Department of Orthodontics at the College of Dentistry, Hawler Medical University in Erbil City. Results: Group DF has a significant effect on the condylar position index and posterior joint space on the closed mouth and disc length on both open and close mouth techniques, and in the group SARA, disc position, and condylar position index on closed mouth technique have shown that significant differences were observed. Conclusion: Class II malocclusions can be effectively corrected by fixed functional appliances. The statistical significance forward movement of the condyle in the glenoid fossa and the posterior movement of the articular disc concerning the condylar head was observed. The mechanism of action of functional appliances appears to include the forward migration of the C-GF complex.

Ozonated oil has several benefits for humans, as it contributes to numerous interventions, maintaining the quality of life and the well-being of individuals. Being a natural product, it has few or almost no side effects. Thus, the study aimed to verify the sensitivity and/or resistance of fixed o “Ozonated” and “Non-Ozonated” oils from Mauritia flexuosa (Buriti), Carapa guaianensis (Andiroba) and essential “Ozonated” oils from Menta piperita (Mint), Eugenia caryophyllus (Clove) in different concentrations, against internationally known bacteria from the American Type Culture Collection – ATCC, comparing with the “Non-Ozonated” versions of the respective oils, using the Agar diffusion technique. Thus, it is evident that the ozonation of the fixed oils of Buriti and Andiroba, as well as the essential oils of Mint and Clove, provided significant results, although they were statistically different. The Buriti and Andiroba oil were ineffective in inhibiting microorganisms. On the other hand, the essential oil of Mint and Clove obtained similar activity of inhibition of microorganisms. With regard to Ozonation, the Essential Oil of “Ozonated” Clove provided greater activity than the “Non-Ozonated” one, which inhibited only one tested microorganism, in addition to producing changes in its chemical composition, requiring individualized studies for the ozonation of each essential oil.

Photovoltaic shading devices (PVSDs) have the dual function of providing shade and generating electricity, which can reduce building energy consumption and improve indoor daylighting levels. This study adopts a parametric performance design method and establishes a one-click simulation process by using the Grasshopper platform and Ladybugtools. The research focuses on the effect of dynamic PVSDs on daylighting and energy consumption in an office building in Qingdao. Through simulation, the study calculates the monthly energy consumption and useful daylight illuminance (UDI) under different inclination angles and installation heights of PVSDs. And the optimal configuration of PVSDs for each month under three dynamic strategies (rotation, sliding, and hybrid) is determined. Additionally, different control strategies and fixed PVSDs are compared to clarify the impact of various control strategies on daylighting and energy consumption. The findings reveal that, compared to no shading, dynamic PVSDs in rotation strategy (with an installation height of 0 m), sliding strategy (with an inclination angle of 20°), and hybrid strategy can achieve energy savings of 32.13%, 47.22%, and 50.38%, respectively. They can increase the annual average UDI by 1.39%, 2.8%, and 3.1%, respectively.

Monge-Ampere equations have important research significance in many fields such as geometry, convex geometry and mathematical physics. In this paper, under some superlinear and sublinear conditions, the existence of nontrivial solutions for a system arising from Monge-Ampere equations with two parameters is investigated based on Guo-Krasnosel'skii fixed point theorem. In the end, two examples are given to illustrate our main results.

Bambara groundnut (BG) (Vigna subterranean L. verdc) is a highly nutritious and economically important leguminous crop of African origin that forms symbiotic relationships nitrogen fixing rhizobia, but it has a low yield. Currently, there is paucity of information on effective rhizobium inoculant, (to improve the yield), for BG which are cheaper and safer alternatives to chemical fertilizers. Indigenous rhizobia strains were trapped from 54 farm soils collected at three Nigerian states (Niger, Kaduna and Kano). Six selected rhizobium strains (Bradhyrhizobium spp) were identified using 16S rDNA sequencing, applied as inoculant in field experiment using completely randomized block design and compared with USDA110 strain (Bradhyrhizobim japonicum), urea fertilizer and un-inoculated plants on 2 selected BG varieties (TVSU1248 and TVSU 631). Nutrient utilization and nitrogen fixation in plants were determined at 6 weeks while leaf chlorophyll was determined forth-nightly. Seed yield was determined at maturity. The strains increased the %nitrogen (1.33±0.10 - ≥1.37±0.05), and %phosphorous (0.48±0.02 - ≥0.51±0.02), %nitrogen fixed (21.07±2.38 - ≥61.30±6.13), nodulation (72.50±21.075 - 154.00±23.79) and leaf chlorophyll were ≥49.74±1.47mg/L, ≥51.82±1.86mg/L and ≥49.65±1.56mg/L at 2nd, 4th and 6th week after planting respectively and the yield of BG (from average of 398.6 Kgha-1 to 1454.725 Kgha-1). Seed yield was highest (1869.85±273.68 Kgha-1) in BG variety TVSU1248 using BN5 strain. Indigenous Bambara-symbiotic strains significantly increased the seed yields, and plant nutrient, showing their potential as use for inoculant to improve the yield of Bambara groundnut.

Recently, Li et al [1] investigated the nonlinear Langevin equations existence including two fractional orders with infinite-point boundary conditions. It has shown that the outcomes given it does count on the solution form for which it has boundary values. It means that their solution needs more to be in the final step. In current work, we will have discussion about the existence and uniqueness for the same boundary conditions by investigating the closely explicit solution form that has no boundary values. Numerical example is supported to have more vision to compare the between new and previous results. It turns out that our results are superior.

Rivaroxaban and aspirin are commonly used antithrombotic agents that are used in combination for the prevention of coronary artery disease (CAD) and atherothrombotic events in adult patients after an acute coronary syndrome (ACS) with elevated cardiac biomarkers, or with coronary artery disease (CAD) or symptomatic peripheral artery disease (PAD) in high-risk patients. The recommended dosage is 2.5 mg Rivaroxaban twice daily with 75–100 mg aspirin daily. This study aimed to develop a fixed-dose combination tablet of rivaroxaban (2.5 mg) and aspirin (50 mg) to decrease the patient's pill burden and enhance medication adherence. The product formula was developed based on compatibility studies among the active ingredients and the active ingredients' compatibility studies. The formula and the manufacturing procedure were chosen based on the risk assessment for each active substance, wet granulation with both actives intragranular was found to have faster dissolution than direct mix formulae. Furthermore, a validated reverse-phase HPLC stability indicator method was developed to detect APIs and their possible degradants in the formula.

In this paper, we consider with a class of system of differential equations whose argument transforms are involution. In this an initial value problem for a differential equation with involution is reduced to an initial value problem for a higher order ordinary differential equation. Than either two initial conditions are necessary for a solution, the equation is then reduced to a boundary value problem for a higher order ODE.

The effects of the surface waves generated by the wind have a significant effect on the currents. A wave current coupled model plays an important role in the design of offshore structures. The interaction between fluids such as incompressible ocean waves and current and offshore structures is significant with many real-time applications in offshore engineering. These coupled models can be applied to Offshore Floating Production Operating and offloading (FPSO), Wind or current turbines and offshore pipelines. The complex issues related to the design are analyzed by using Computational Fluid Dynamics, which requires an investigation of the multiphase flow between wave and current and the structure which is considered restrictive due to the computational cost. If viscous effects are neglected then the single-phase flow models have been recommended, where wave-current interaction have been modelled successfully. Models have been developed where velocities and pressure are computed and the results can be verified with the experimental results available in the literature. In this study the existing numerical methods, mesh types are discussed along with their coupling methods. Here single-phase and multiphase models with small and medium movement are reviewed and their applications are highlighted.

In the present study, Electrocoagulated Metal Hydroxide Sludge (EMHS) was analyzed as adsorbent material to remove both fluoride ion (F-) and arsenic V (As(V)) from aqueous effluents. This material was generated during an electrocoagulation process using Aluminum anode. It was characterized by using specific surface areas and the surface morphology was studied by scanning electron microscopy (SEM). Adsorbent fixed-beds are generally studied to remove different class of contaminants. EMHS was evaluated using a continuous flow rate column test with an experimental design. The effect of initial concentration of F- (2.5–10 mg L⁻¹) and the Empty Bed Contact Time (EBCT (0.4–0.8 min)) was studied following a central composite design methodology. The experimented parameters had a significant influence on saturation time, breakthrough volume, and breakthrough time. A response surface analysis was a tool for analyzing the adsorption study, showing interactions that are complicated to identify by others methods. The results, here reported, revealed that EMHS is an efficient and promising adsorbent material in order to remove F- and As(V) from water contaminated by these pollutants.

The paper aims to investigate on the determinants of the capital structure of the Italian SMEs and it is based on a large panel of Italian manufacturing SMEs observed in the years 2001-2013. The analysis achieves a comparative investigation between the capital structure of the firms belonging in the Southern region, the so-called Italian Mezzogiorno that is the slow growing area of the country, and the firms of the Center-northern region of Italy, that is the more developed area of the country. Fixed effect panel techniques applied to the several standard leverage models allows to reaffirm some distinctive features showing differences of the financial behavior of regional firms.

Einstein’s publication of the Special Theory of Relativity in 1905 gave birth to the space-time model as a fundamental arena of the universe. Time has become 4th dimension of space and theoretically one could move backward and forward in time. Hypothetical time travel has been a hot topic of scientific discussion since Kurt Gödel published his article about closed time-like curves (CTC) in 1949. He was aware that his CTC model confirms that there is no physical time. Physicists understood his model as a theoretical frame for time travel. Recent research confirmed that universal space is time-invariant. Motion happens only in space and time is the duration of motion. Nobody can travel in time because time has no physical existence. Time as duration is an emergent physical quantity entering existence in the process of measurement of the duration of material change with clocks. The universal space is utterly timeless. There is no physical time in the universe.

This paper presents the results of investigations into the pyrolysis of waste polypropylene in a laboratory fixed-bed batch reactor. The experiments were designed and verified in such a way as to allow the application of the Response Surface Methodology (RSM) in the development of an empirical mathematical model that quantifies the impacts mentioned above. The influence of the mass of the raw material (50, 100 and 150 g), together with the reactor temperature (450, 475 and 500 °C) and the reaction time (45, 50 and 75 min) was examined. It has been shown that the mass of the raw material, i.e. the filling volume of the reactor, has a significant influence on the pyrolysis oil yield. This influence exceeds the influence of reactor temperature and reaction time. This was explained by observing the temperature change inside the reactor at three different spots at the bottom, middle and top of the reactor. Recorded temperature diagrams show that with greater masses of feedstock, local overheating occurs in the middle part of the reactor, which leads to overcracking of vapor products, and from there to an increased formation of non-condensable gases, i.e. reduced yield of pyrolytic oil.

In this paper, a positive answer to the open question of Fabino et al. is given, and the concept of I\c sik type set valued contractions is introduced and fixed point theorem for such contractions is established. Examples to support main theorems are given, and an application to integral inclusion is given.

This paper presents the results of investigations on the pyrolysis of tyres waste in a laboratory fixed bed batch reactor. The results regarding the influence of either the reaction temperature (425, 450, 475, and 500 °C) and the flow of the inert gas (0, 100, 300, and 500 mL/min) on products yield (referred to pyrolysis of waste tyres) are also considered and discussed. On the basis of the above mentioned findings, the most appropriate experimental conditions were selected to contribute to a higher yield of pyrolysis oil. The sample of pyrolysis oil obtained from the experiments carried out in the selected optimal conditions (reaction time 120 min, temperature 450 °C and the inert gas flow of 100 mL/min) was subjected to a calorimetric and infrared spectroscopy analysis. The results of IR spectroscopy analysis on this oil sample showed the following content in percentages (by mass): 32.59 % of aromatics, 51.06 % of paraffins and 16.35 % of naphthenes. The pyrolysis oil so obtained has a high calorific value (42 MJ/kg) and a low sulfur content (0.41 % by mass), which makes it an excellent raw material for energy production. The solid product, i.e. pyrolysis char or carbon black, has the potential to be used as an adsorbent or catalyst support after an activation process, which changes its irregular pore structure to a more voluminous one, making the overall structure more crystalline and symmetrical. Pyrolysis coal has a fairly high calorific value of 31 MJ/kg, when compared to typical solid fuels, so it can be used in energy production or as a feedstock for the gasification process.

Most of the literature on the optimization problem of transportation in supply chain networks (SCN) considered fixed costs (FC). However, in the practical applications of this problem it is important to study the effect of FC. This paper examines the impact of fixed cost increase as well as the variable cost on the optimization of a Two-Stage SCN. To do so, two mathematical models for mixed-integer nonlinear programming are developed. The first model optimizes fixed and variable costs in addition to the opening cost, whereas the second model only optimizes variable and opening costs. To evaluate the effect of considering FC on the optimization supply chain problem, four groups of instances are randomly generated, and solved using Lingo. The results of the two models are compared utilizing the average percentage deviation. In addition, sensitivity analysis is performed to determine the impact of changes in opening and variable costs on the considered optimization problem. The computational results and the sensitivity analysis show that the first model with minimized FC outperforms the second model, which does not consider the FC in minimization and FC affect the optimization.

We develop a quantitative microscopic theory of decaying Turbulence by studying the dimensional reduction of the Navier-Stokes loop equation for the velocity circulation. We have found an infinite dimensional manifold of solutions of the Navier-Stokes loop equation\cite{M93, M23PR} for the Wilson loop in decaying Turbulence in arbitrary dimension $d >2$. This family of solutions corresponds to a fractal curve in complex space $\mathbb C^d$, described by an algebraic equation between consecutive positions plus a nonlinear periodicity condition. We derive the constrained SDE for the evolution of the fractal curve at a fixed moment of physical time as a function of an auxiliary stochastic time. We expect this stochastic process to cover our fixed manifold of the solutions of the decaying Turbulence. The energy density of the fluid decays as $\mathcal E_0/t$, where $\mathcal E_0$ is an initial dissipation rate. Presumably, we have found a new phase of extreme Turbulence yet to be observed in real or numerical experiments.

The main issues of accounting reporting regarding goodwill are whether a firm’s management reliably conveys their private information about future earnings, and whether they disclose value-relevant and useful information to accounting users. In the current International Financial Reporting Standards (IFRS) regulations, the goodwill impairment test is based on management’s discretionary assessments. This study examines how goodwill impairment is reported under IFRS considering company- and industry-specific economic factors, proxies for earnings management, and macroeconomic crisis years. We extend previous research using Tobit and Logit regression, by employing a fixed-effects model. This approach is possible because of a panel data set comprising 449 of 600 active companies sampled from the STOXX Europe 600 index from 2005 to 2018. We find that goodwill impairments are largely concentrated in certain companies, industries, and years. The regression models show a significant negative correlation between companies’ return on total assets and goodwill impairments. Moreover, we discover that goodwill impairments have a significant positive correlation with goodwill intensity, debt ratio, and the proxy for reporting a one-off big bath charge. In addition, we find that the global financial crisis in 2008-2009 and the European debt crisis in 2011 differ significantly from other fiscal years

In the framework of a multiplicative metric space. We have discuss some Properties of convex structures in pseudo multiplicative metric space and have applied these properties toiobtain alfixed point results in complete pseudo. It would be interesting to prove some further results in such metric spaces with completeness property.

Traffic congestion is one of the foremost problems confronted by the urban and suburban tenants of today. Traffic congestion increases vehicle emissions and degrades air quality. Urban planners and policy makers have consequently been always investigating choices to alleviate traffic congestion and to enhance air quality. Teleworking is one option that has received significant consideration and has been studied in the recent past. The aim of the study is to explore the relationship between teleworking, air quality and traffic in Switzerland. The analysis relies on panel individual and household level data over the period 2002-2013. We examine five main air pollutants; the sulphur dioxide (SO₂), the ground-level ozone (O₃) the nitrogen dioxide (NO₂), the carbon monoxide (CO) and the particulate matter less than 10 microns (PM₁₀). Based on the fixed effects estimates, teleworking reduces traffic volume by 1.9 per cent. Furthermore, the reduction observed on air pollution is higher for NO₂, CO and PM₁₀ ranging between 3.3-3.7 per cent, followed by O₃ at 2.3 per cent and SO₂ at 2.1 per cent. According to instrumental variable (IV) approach and the two stage least squares (2SLS) method, the effect is higher ranging between 2.6-4.1 per cent. The respective reduction on traffic becomes 2.7 per cent. Overall, the main concluding remark of the study is that teleworking can be a promising tool for urban planning and development, focusing at the traffic volume reduction, and the air quality improvement. Additional policy implications of teleworking and its beneficial effects for the society are further discussed.

Research has shown that emotional states may influence the subjective experience of time. The present study involved 111 healthy adult participants and examined the impact of emotional stimuli on time perception, using a time estimation task with four conditions: in one of the conditions, participants estimated the exposure time of a black screen, wherein the duration could vary be-tween 2 to 7 s (condition without emotional interference); in the other conditions, participants es-timated the exposure time (also ranging from 2 to 7 s) of images that would induce pleasant, un-pleasant, or neutral emotions, to which participants were instructed to focus their attention (pleasant, unpleasant, or neutral emotions). The results showed that participants estimated “shorter” time intervals (underestimation) for pleasant and unpleasant images compared to the condition without interference, but no significant differences were found between the neutral condition and the condition without interference. It is suggested that increased attention to an ex-ternal stimuli, regardless of its emotional valence, produces an underestimated perception of time.

We consider the problem of scheduling $n$ jobs with identical processing times and given release as well as delivery times on $m$ uniform machines. The goal is to minimize the makespan, i.e., the maximum full completion time of any job. This problem is well-known to have an open complexity status even if the number of jobs is fixed. We present a polynomial-time algorithm for the problem which is based on the earlier introduced algorithmic framework blesscmore (``branch less and cut more''). We extend the analysis of the so-called behavior alternatives developed earlier for the version of the problem with identical parallel machines and show how the earlier used technique for identical machines can be extended to the uniform machine environment if a special condition on the job parameters is imposed. The time complexity of the proposed algorithm is $O(\gamma m^2 n\log n)$, where $\gamma$ can be either $n$ or the maximum job delivery time $q_{\max}$. This complexity can even be reduced further by using a smaller number $\kappa<n$ in the estimation describing the number of jobs of particular types. However, this number $\kappa$ becomes only known when the algorithm has terminated.

Facing the charging difficulties of free-floating shared electric vehicle and the high cost of mobile charging for single demand, this article proposes a collaborative charging planning method based on the complementary advantages of fixed charging stations and mobile charging vehicles, which can charge shared electric vehicles more efficiently and reduce the charging cost at the same time. A bi-level programming model for fixed and mobile cooperative charging is constructed. The upper level of the model is the minimization model of system charging total cost, seeking the optimal charging scheme and the number of mobile charging vehicles. The lower model is a fixed and mobile cooperative charging path planning model, which calculates the optimal routes for mobile charging vehicles and the shared electric vehicles that need to be transferred to the fixed charging station. The example results show that the cost of the proposed fixed-mobile cooperative charging scheme is reduced by 12.6% compared with the pure fixed charging scheme and 14.9% compared with the pure mobile charging scheme

Background - Mandibular flexion (MF) is a complex biomechanical phenomenon, which involves a deformation of the mandible, due mainly to the contraction of the masticatory muscles, and can have numerous clinical effects. The main aim of the current systematic review is to highlight the different factors that can increase MF, to help clinicians, identify patients to whom they should pay more attention. As a secondary outcome, we wanted to analyze the preventive measures and suitable techniques to be adopted to minimize the negative effects of this phenomenon on oral fixed rehabilitations. Methods - The review, which was carried out in accordance with the “Preferred Reporting Items for Systematic reviews and Meta-Analyses” (PRISMA) flowchart, was recorded in the “International Prospective Register of Systematic Reviews” (PROSPERO). As research questions, “Patient/Population, Intervention, Comparison and Outcomes” (PICO) questions were employed. Using the ROBINS-I technique, the risk of bias in non-randomized clinical studies was evaluated. Results - The initial electronic search identified over 1300 potential articles, of which 54 studies were included in this systematic review. Information regarding the relationship between MF and individual factors, mandibular movements, impression-taking and fixed rehabilitations were obtained. Conclusions – The studies included in this systematic review showed that MF is greater during protrusive movements, in the posterior areas of the lower jaw, and in patients with brachial facial type, greater jaw length, small gonial angle and less density, length and bone surface of the symphysis. The biomechanical effects of mandibular flexion on fixed restorations are debated. Prospective clinical and radiological observational studies should be conducted to evaluate the potential short-, medium- and long-term consequences of MF.

The combination of non-steroidal anti-inflammatory drugs (NSAIDs) with non-opioid analgesics is common in clinical practice for the treatment of acute pain conditions like post-operative and post-traumatic pain. Besides that, and despite the very satisfactory results achieved by oral analgesics, parenteral analgesia is a key tool in the treatment of painful conditions when the enteral routes are not convenient. The parenteral ready-to-use fixed-dose combinations of NSAIDs with non-opioid analgesics like paracetamol or metamizole could play a central role in the treatment of painful conditions since they are able to gather into only one formulation the advantages of multimodal and parenteral analgesia. Surprisingly, only very recently a parenteral ready-to-use fixed-dose combination of Ibuprofen/Paracetamol was launched to the market. This review aims to review the current availability of NSAID-based Parenteral Fixed-dose combinations with paracetamol and metamizole in the European and American markets, and how the combination of such drugs could play a central role in a multimodal analgesia strategy. Also, it is explored how the parenteral formulations of NSAIDs, paracetamol, and metamizole could serve as starting elements for the development of new parenteral ready-to-use fixed-dose combinations. With this review, we concluded that, despite the well-recognized utility of combining NSAIDs with non-opioid analgesics, there are in the literature several randomized clinical trial studies unable to demonstrate clear advantages concerning their efficacy and safety. In the future, it is deemed necessary to perform clinical trials specifically designed to assess the efficacy and safety of these fixed-dose formulations to generate solid evidence of their clinical advantages.

This study utilized panel data from 31 Chinese provinces over a period of nine years to investigate the impact of green finance on the upgrading of the agricultural industrial structure. A fixed-effect model was employed, and the findings indicate that green financing has a positive effect on the growth of China's agricultural industry. However, regional disparities exist, particularly in the uneven distribution of green financing across the eastern, central, and western regions. Moreover, it emphasizes the need to consider regional differences and tailor development strategies accordingly. To promote further development and transformation of China's agricultural industrial structure, the study recommends innovative green financial products, improved regulations and policies, and the integration of digital technologies.

The paper's main goal is to introduce a novel type of interpolative convex contraction and build up some fresh findings for it using the interpolative convex contractions' progressive approach. We have established certain conclusions using orbitally S-complete and Suzuki type contractions in F-metric spaces. My research aims to examine the fixed point method's efficacy in solving fractional differential equation with boundary conditions.

Predicting the tidal wave is essential not only to better understand hydrological cycle at the boundary between land and ocean but also to improve energy production in the coastal area. As affected by various factors such as astronomical, meteorological, and hydrological effects, predicting the tidal wave at the estuary remains uncertain. In this study, we present a novel method to improve short-term tidal wave predictions using a fixed-lag smoother based on sequential data assimilation (DA). The proposed method is implemented for the tidal wave predictions at the estuary of Nakdong River. As a result, the prediction accuracy was improved by 63.9% with DA and the calibration using the regression. Although the accuracy of DA diminished for increasing forecast lead times, the 1-hr lead forecast by DA had still 44.4% improvement over the open loop without DA. Plus, the optimal conditions for the fixed-lag smoother were analyzed in terms of the order of a smoothing function and the length of assimilation window and forecast lead time. It was suggested that the optimal DA configuration could be obtained with the 8th order polynomial as a smoothing function assimilated under 6-hr or longer past and future DA windows.

Open-cell metallic foams used as catalyst supports exhibit excellent transport properties. In this work, a unique application of metallic foam, as pelletized catalyst in a packed bed reactor, is examined. By using a wall-segment Computational Fluid Dynamics (CFD) setup, parametric analyses are carried out to investigate the influence of foam morphologies (cell size ϕ=0.45-3 mm and porosity ε=0.55-0.95) and intrinsic conductivity on flow and heat transport characteristics in a slender packed bed (N=Ddp=6.78) made of cylindrical metallic foam pellets. The transport processes have been modeled using an extended version of conventional particle-resolved CFD, i.e., flow and energy in inter-particle spaces are fully resolved, whereas porous-media model is used for the effective transport processes inside highly-porous foam pellets. Simulation inputs include the processing parameters relevant to Steam Methane Reforming (SMR), analyzed for low (Rep~100) and high (Rep~5000) flow regimes. The effect of foam morphologies on packed beds has shown that the desired requirements contradict each other, i.e., increase in cell size and porosity favor the reduction in pressure drop, however lowering the heat transfer efficiency. A design study is also conducted to find the optimum foam morphology of a cylindrical foam pellet at higher Rep~5000, which yields ϕ = 0.45, ε = 0.8. Suitable correlations to predict the friction factor and the overall heat transfer coefficient in a foam packed bed have been presented, which considers the effect of different foam morphologies over a range of particle Reynolds number, 100≤Rep≤5000.

Although CAD/CAM ceramics present a promising alternative to metal-ceramic fixed dental prostheses, little is known about their mid- and long-term clinical performance. This systematic review aims to estimate the survival and success rates and describes the underlying complication characteristics for CAD/CAM tooth-supported fixed dental prostheses (FDPs). We systematically searched MEDLINE and Web of Science to find relevant prospective studies with a follow-up of at least one year. We estimated pooled 1-, 5- and 10-year survival and success rates by combining the collected data in a Poisson regression model. Descriptive statistics were conducted to evaluate the distribution of failures and complications in the included studies. Risk of bias for the included studies was assessed with an adapted checklist for single-arm trials. Pooled estimated 1-, 5-, and 10-year survival rates ranged from 93.80% to 94.66%, 89.67% to 91.1%, and 79.33% to 82.20%, respectively. The corresponding success rates, excluding failures but including any other types of intervention, were 94.53% to 96.77%, 90.89% to 94.62%, and 81.78% to 89.25%. Secondary caries was the most frequent cause of failure, followed by chipping of the veneering. The most common cause of complication, excluding failures but requiring intervention, was chipping of the veneering. Risk of bias was generally acceptable for the included studies, with 7 studies associated with low risk of bias, 8 studies with a moderate risk of bias, and 3 studies with serious risk of bias. The current meta-analysis on CAD/CAM supported FDPs revealed satisfying survival and success rates for up to 10 years of exposure. More prospective studies focusing on long-term performance are needed to strengthen the evidence currently available in the literature.

Since smoke usually occurs before a flame arises, fire smoke detection is especially significant for early warning systems. In this paper, a DSATA(Depthwise Separability And Target Awareness) algorithm based on depthwise separability and target awareness is proposed. Existing deep learning methods with convolutional neural networks pretrained by abundant and vast datasets are always used to realize generic object recognition tasks. In the area of smoke detection, collecting large quantities of smoke data is a challenging task for small sample smoke objects. The basis is that the objects of interest can be arbitrary object classes with arbitrary forms. Thus, deep feature maps acquired by target-aware pretrained networks are used in modelling these objects of arbitrary forms to distinguish them from unpredictable and complex environments. In this paper, this scheme is introduced to deal with smoke detection. The depthwise separable method with a fixed convolution kernel replacing the training iterations can improve the speed of the algorithm to meet the enhanced requirements of real-time fire spreading for detecting speed. The experimental results demonstrate that the proposed algorithm can detect early smoke, is superior to the state-of-the-art methods in accuracy and speed, and can also realize real-time smoke detection.

Purpose: To compare the therapeutic efficacy and safety of dorzolamide/timolol fixed-combination in newly diagnosed primary open angle glaucoma patients. Methods: In this prospective, interventional case series, newly diagnosed primary open angle glaucoma (POAG) patients that had not been treated for glaucoma were included. Patients were started on Cosopt twice a day (BID) for 1 month and then switched to three times a day (TDS) for additional 1 month. Patients underwent comprehensive ophthalmic examination, diurnal intraocular pressure (IOP), blood pressure (BP) and 24-hours heart rate (HR) measurements at baseline, month 1( BID), and month 2( TDS). IOP, systolic and diastolic pressures were measured at 8:00 AM,12:00 AM, 4:00 PM, 8:00 PM and 12:00 PM. Throughout the study, all adverse events were recorded and monitored by the investigators. Results: In 31 POAG patients that completed the study ,mean baseline IOP was 23.1±3.15 mmHg . IOP was decreased significantly 16.5 ± 2.21 at 1 month (P < 0.0001) and 13.9 ± 2.23 mmHg at 1 and 2 month follow up. (P < 0.0001) IOP was significantly lower in month 2 compared to month 1 (P = 0.0004). While Cosopt BID significantly reduced the mean 24-hour systolic BP and mean 24-hour HR from baseline (P < 0.0001), the mean 24-hour systolic BP and HR remained unchanged 2ith Cosopt TDS compared to BID (P = 0.62). Conclusions: Cosopt TDS has a superior IOP-lowering effect than Cosopt BID in POAG patients with comparable safety profile.

Asymptotic theories for fractional cointegrations have been extensively studied in the context of time series data, with numerous empirical studies and tests developed. However, most of the previously developed testing procedures for fractional cointegration were primarily designed for time series data. This paper proposes a generalized residual-based test for fractionally cointegrated panels with fixed effects. The test development is based on bivariate panel series with the regressor assumed to be fixed across cross-sectional units. The proposed test procedure accommodates any integration order between [0,1], and it is asymptotically normal under the null hypothesis. Monte Carlo experiments demonstrate that the test exhibits better size and power compared to a similar residual-based test across varying sample sizes.

In this paper, we demonstrate that fixed-weight layers, generated from random distribution or logistic functions, can effectively extract significant features from input data, resulting in high accuracy on a variety of tasks, including Fisher’s iris, Wisconsin Breast Cancer, and MNIST datasets. We have observed that logistic functions yield high accuracy with less dispersion in results. We have also assessed the precision of our approach under conditions of minimizing spikes number generated in the network, it is a practically useful for reducing energy consumption in spiking neural networks. Our findings reveal that the proposed method demonstrates a highest accuracy on Fisher’s iris and MNIST datasets with logistic regression. Furthermore, they surpass the accuracy of the conventional (non-spiking) approach using logistic regression in the case of Wisconsin Breast Cancer. We have also investigated the impact of non-stochastic spike generation on accuracy.

In this study, we focus on an abstract form of summation equations, which can be regarded as a particular class of nonlinear difference equations. We investigate sufficient conditions for the existence of discrete almost automorphic solutions by appealing to the fixed point theory and establish a linkage between the existence of discrete almost automorphic solutions and the existence of bounded solutions for the nonlinear difference equations in the spotlight. Consequentially, we propose a discrete counterpart of the Bohr-Neugebauer theorem for the qualitative theory of difference equations.

Currently, most plastic waste stems from packaging materials, with a large proportion of this waste either discarded or used to derive fuel. Accordingly, there is growing interest in the use of pyrolysis in the context of chemically recycling non-recyclable (i.e., via mechanical means) plastic waste into petrochemical feedstock. The aim of this study is to use kinetic analyses to elucidate the pyrolytic properties of solid recovered fuel (SRF) produced using two types of reactors, namely, fixed bed and fluidized bed reactors. From the kinetic analysis, the activation energy corresponding to the rate of pyrolysis reaction conversion was obtained. In conclusion, we found that the pyrolysis occurs more vigorously in fluidized bed reactors compared to fixed bed reactors.

Abstract Aims: In recent years, electro kinetic (EK) remediation has become more popular as a novel method for removing chromium contamination from soil. This approach, however, is ineffective since it uses both cationic and anionic forms of chromium. In this work, a membrane –based technique was employed to increase the efficiency of the electro kinetic removal of chromium. Methods: Chromium removal from polluted sludge was studied in four bench-scale experiments, two of which used distilled water (EK-1, EK2 & Membrane) and two of which used acetic acid as a catholyte (EK-3, EK4 &Membrane). Results: The pH, total chromium, and fractionation of chromium in the sludge were measured after remediation. In the EK-1, EK-2 & Membrane and EK-3, EK-4 & Membrane trials, the average removal efficiency of total chromium was 47.6%, 58.6%, and 74.4%, 79.6%, respectively. Conclusion: In contrast to the electro kinetic remediation strategy, which left approximately 80% of the sludge neutral or alkaline after treatment, the use of the membrane created acidic soil conditions throughout the sludge. For example, the high field intensity used in the membrane tests may have helped to facilitate chromium desorption, dissolution and separation from the sludge, as well as enhance chromium mobility. The findings show that the membrane can improve the effectiveness of chromium removal from sludge when utilized in the EK remediation process.

This study analyzes the effect of economic growth and income distribution on health inequality using data from the Organization for Economic Cooperation and Development (OECD). A panel analysis was conducted by combining 21 years of data (from 2000 to 2020) from 38 OECD countries. Life expectancy and avoidable mortality were set as the dependent variables; gross domestic product and poverty gap were set as the independent variables; body mass index, consumption, smoking rate, healthcare personnel, number of beds in health service facilities, national medical expenses, and unemployment were set as control variables. First, economic growth and poverty gap significantly affect life expectancy and avoidable mortality. It has been confirmed that to resolve health inequality, growth during growth and distribution must be prioritized. Second, it has been confirmed that as the poverty gap increases, life expectancy increases and the avoidable mortality rate decreases. A mechanism different from the existence of a medical security system targeting the lowest class or an increase in the welfare of society worked. In conclusion, as a policy proposal to alleviate health inequality, this study suggests that policy intervention is necessary to block or alleviate the negative impact of income inequality in health care policies.

The diamagnetic levitation technique can be applied to non-destructive testing for identifying cracks and defects in magnetic materials. Pyrolytic graphite is a material that can be leveraged in micromachines due to its no-power diamagnetic levitation on a permanent magnet (PM) array. However, the damping force applied to pyrolytic graphite prevents it from maintaining con-tinuous motion along the PM array. This paper investigates the in-plane motion and damping characteristics of pyrolytic graphite sheets on the PM array. The centroid of pyrolytic graphite will maintain a stable levitation when positioned on the intersecting point of the PM array. Fur-thermore, the in-plane motion of two different pyrolytic graphite sizes - PG10 (10×10×0.5mm3) and PG20 (20×20×0.5mm3) - has revealed that the in-plane forces applied to them are approximately 61.4μN and 28.2μN, respectively. The smaller sheet has a shorter oscillation time while oscillating before it stabilizes. The damping ratio of the oscillation was between 0.1-0.2. The in-plane force and the stable time of pyrolytic graphite are related to its size ratio in comparison with the PM. This relationship is believed to promote stability, as the force acting on the graphite sheet will be distributed over a larger area when the sheet size increases. During the fixed-axis rotation process, the study found that the friction coefficient and friction force decreased as the rotational speed decreased. The diamagnetic levitation of pyrolytic diamagnetic levitation is also unable to maintain long-term axial rotation. Finally, friction force was tested using PG10 during fixed-axis rotation above a circular PM array. The results showed that the order of the friction coefficient is 10-3, and the friction force is about 0.8μN, decreasing with graphite rotation speed. We hope this technique will be used in crack detection, magnetic detection and other micromachine.

Increasing green total factor productivity is the key to achieving green development in agriculture. This study measured the green total factor productivity of Jiangxi’s agriculture, and its regional and temporal evolution characteristics were examined. The fixed-effects model was then used to investigate the model’s fundamental components empirically. The study’s findings reveal the following: During the period under review, technical change was the primary element driving the rise in the green total factor productivity of agriculture. A rising “U”-shaped trend with notable regional variances characterizes the spatial and temporal evolution. The primary factors that affect changes in green total factor productivity in agriculture include the ease of transportation, the per capita disposable income of rural residents, the level of agricultural mechanization, the degree of urbanization, the level of financial support for agriculture, and the percentage of workers in secondary industries. As a result, it is suggested that, in order to substantially increase agricultural green total factor productivity, agricultural green technological support should be strengthened, more fully developed, and promoted in a multi-pronged approach.

We study the Kelvinons: monopole ring solutions to the Euler equations, regularized as the Burgers vortex in the viscous core. There is finite anomalous dissipation in the inviscid limit. However, in the anomalous Hamiltonian, some terms are growing as logarithms of Reynolds number; these terms come from the core of the Burgers vortex. In our theory, the turbulent multifractal phenomenon is similar to asymptotic freedom in QCD, with these logarithmic terms summed up by an RG equation. The small effective coupling does not imply small velocity; on the contrary, velocity is large compared to its fluctuations, which opens the way for a quantitative theory. In the leading order in the perturbation theory in this effective coupling constant, we compute running multifractal dimensions for high moments of velocity circulation, in good agreement with the data for quantum Turbulence and available data for classical Turbulence. The logarithmic dependence of fractal dimensions on the loop size comes from the running coupling in anomalous dimensions. This slow logarithmic drift of fractal dimensions would be barely observable at Reynolds numbers achievable at modern DNS.

Free route airspace (FRA) is a new concept of European air transport. It has been designed to eliminate the negative impact of air traffic on the environment, minimize fuel consumption, simplify and expand flight planning. In our research, FRA is modelled by using graph theory, networks, and convex analysis. We also looked for answers to the question which are the basic mathematical properties of airspace? Basic mathematical properties are expressed using axioms. Therefore, in our work, we state the general, basic axiom of airspace based on our FRA research. The axiom is given using practical, significant entry points and geodetic coordinates.

In this article, we are interested in a new generic class of nonlocal fractional impulsive differential inclusions with linear sectorial operator and Lipschitz multivalued function in the setting of finite dimensional Banach spaces. By modifying the definition of PC-mild solutions initiated by Shu, we succeeded to determine new conditions that sufficiently guarantee the existence of the solutions. The results are obtained by combining techniques of fractional calculus and fixed point theorem for contraction maps. We also characterize the topological structure of the set of solutions. Finally, we provide a demonstration to address the applicability of the theoretical results.

This paper uses panel data to find the determinants of tracking errors in exchange traded funds (ETFs) in the Hong Kong stock market. A comparison of tracking errors between physical and synthetic ETFs also indicates that the synthetic ETFs have higher tracking errors. The magnitude of tracking errors is found to be negatively related to size but positively related to dividend yield, trading volumes of funds, and market risk. However, this study also finds that expense ratio has a negative impact on tracking error, which is not consistent with previous studies, and which this paper addresses.

In Einstein’s Special Relativity(SR), time is treated as one of the four dimensions within spacetime and is relative in nature. Typically, a photon clock serves as the illustrative device in the time dilation thought experiment, featuring a single photon bouncing between two mirrors. However, the present paper identifies a fundamental flaw in this thought experiment, hence challenging its validity. Contrary to SR, this paper asserts that time is a consequence of motion. Space and time should be treated differently as proposed by classical mechanics. Importantly, this stance does not challenge the concept of curved space in General Relativity (GR), but rather questions the idea of relative time, as employed in both SR and GR. The absence of time dilation also dispels the twin paradox, prompting a necessary reassessment of the second postulate of relativity to ensure a more precise depiction of relativistic effects.

Time, traditionally viewed as a linear, non-dynamic parameter, is re-envisioned in this study as a Hyperdimensional concept. This paper conducts a cross-disciplinary examination, critically analysing the conceptualization of time in classical mechanics, quantum mechanics, and cosmology to propose a ground breaking reconceptualisation that extends beyond conventional frameworks. In classical mechanics, time is perceived as an absolute, continuously progressing backdrop, largely independent of events. Quantum mechanics treats time as a static parameter that does not influence quantum states but provides a framework for their evolution. In cosmology, time is considered a dimension that emerges from the Big Bang and serves as a measure for the universe's expansion, yet it does not interact with the structural dynamics of the cosmos. Challenging the transformative insights of Einstein’s relativity, which merges time with spatial dimensions under extreme conditions, we advocate for a perspective that views time as a Hyperdimensional and universal constant. This perspective posits that time, despite its unique and intrinsic properties, does not dynamically interact with or alter physical phenomena. Instead, it underpins our understanding of phenomena across different scales—from the minutiae of quantum states to the macroscopic dynamics of cosmology—without direct causation or change. A critical examination of time dilation and relativistic assumptions reveals significant discrepancies in traditional interpretations, particularly in how they are applied across different physical contexts. Our findings challenge the uniform applicability of time dilation, suggesting that observed phenomena often attributed to relativistic effects might better be explained through non-relativistic mechanisms such as phase shifts or changes in wavelength rather than temporal dilation. By synthesizing insights from various scientific domains, we advocate for a unified theory that recognizes time as a fundamental, universal dimension that is conceptual and non-interactive. Our goal is to bridge existing gaps between diverse scientific interpretations and promote a more integrated, profound understanding of time's autonomous and intrinsic nature.

The present investigation focuses on the impact of jet nozzle orientation on mixing time in a cylindrical tank. The aim is to identify nozzle positions that improve mixing performance and to elucidate the governing parameters that influence it. A water tank was employed for the experiment. The vertical inclination angle (α) and the horizontal inclination angle (β) of the jet nozzle determined the nozzle positions. Mixing time was determined using an inert tracer and spectrophotometry measurements. The findings show that the mixing time is significantly influenced by the position of the jet nozzle position. The accuracy of existing jet turbulence and the circulation models for the prediction of mixing time was evaluated for the different nozzle positions. Our results indicate that both models provide accurate predictions for the conventional centrally aligned (β = 0°), upward-pointing jet nozzle positions only (α > 0). For the other nozzle positions where β > 0° and at varying α, the data follow the same trends as the jet turbulence and circulation models, however, the proportionality constants vary. Shorter mixing times can be attributed principally to longer jet path lengths and therefore higher fluid entrainment and circulation, as well as higher dissipation rates per jet length squared. However, it is suspected that the 3-dimensional nature of the flow pattern generated in the tank also plays a non-negligible role since mixing is hindered when the nozzle points more towards the tank wall.

The uncertainty in the secondary path of an Active Noise Control (ANC) headphone affects the waterbed effect and stability of the feedback system. This study focuses on the uncertainty of the secondary path when real users wear headphones, and proposes a new uncertainty constraint based on the measured results of the secondary path transfer function under different wearing conditions of dummy head and limited subjects. This constraint and a cascaded second-order infinite impulse response filter with fixed coefficients are used to formulate a control strategic function, which is optimized by the Improved Grey Wolf Optimizer (IGWO) algorithm to obtain the optimal controller with better noise reduction performance. The proposed method and simulation model are validated based on the experimental test results. The results demonstrate that the safety factor and waterbed suppressing factor contained in the proposed uncertainty constraint ensures more stable noise reduction and effective suppression of the waterbed effect for new subjects without a priori data.

This is the second paper in a cycle investigating the exact solution of loop equations in decaying turbulence. We perform numerical simulations of the Euler ensemble, suggested in the previous work, as a solution to the loop equations. We designed novel algorithms for simulation, which take a small amount of computer RAM so that only the CPU time grows linearly with the size of the system and its statistics. This algorithm allows us to simulate systems with billions of discontinuity points on our fractal curve, dual to the decaying turbulence. For the vorticity correlation function, we obtain \textbf{quantum fractal laws} with regime changes between universal discrete values of indexes. The traditional description of turbulence with fractal or multifractal scaling laws does not apply here. The measured conditional probabilities of fluctuating variables are smooth functions of the logarithm of scale, with statistical errors being negligible at our large number of random samples $T = 167,772,160$ with $N = 200,000,000$ points on a fractal curve. The quantum jumps arise from the analytical distribution of scaling variable $X = \frac{\cot^2(\pi p/q)}{q^2}$ where $\frac{p}{q}$ is a random fraction. This distribution is related to the totient summatory function and is a discontinuous function of $X$. In particular, the energy spectrum is a devil's staircase with tilted uneven steps with slopes between $-1$ and $-2.03$. The logarithmic derivative of energy decay $n(t)$ as a function of time is jumping down the stairs of universal levels between $1.50$ and $1.53$. The quantitative verification of this quantization would require more precise experimental data.

In this paper, we report orthogonal fuzzy versions of some celebrated iterative mappings. We provide various concrete conditions on the real valued functions J,S:(0,1]→(−∞,∞) for the existence of fixed-points of (J,S)-fuzzy iterative mappings. We obtain many fixed point theorems in orthogonal fuzzy metric spaces. We apply (J,S)-fuzzy version of Banach fixed point theorem to show the existence and uniqueness of the solution. We support these results with several non-trivial examples and applications to Volterra-type integral equations and fractional differential equations.

In this paper, we established the existence of PC-mild solutions for non local fractional impulsive functional integro-differential equations with finite delay. The proofs are obtained by using the techniques of fixed point theorems, semi-group theory and generalized Bellman inequality. In this paper, we have used the distributed characteristic operators to define the mild solution of the system. Results obtained here improve and extend some known results.

Physicists have employed various approaches to solve the “paradox” and offered a consistent conclusion that the traveller twin is younger than the homebody twin. However, some authors attribute the cause of differential aging to acceleration, while others believe that acceleration should not be regarded as the source of differential aging, but frame switch is. So far there is no agreement on this issue. Actually, acceleration and frame switch should not be regarded as the source of differential aging. The author will introduce a thought experiment in which two very long spacecraft are moving in opposite directions at a speed close to the speed of light to discuss the real cause of differential aging. The author found that the real cause of differential aging in the twin “paradox” is because of the asymmetry of destination choice. People always choose their destinations in the universe rather than in spacecraft. The destinations are always stationary relative to the homebody twin and moving relative to the traveller twin. Once we choose a destination in a reference frame, the distance is the proper length in this reference frame, but the distance will contract in another moving reference frame, thus the recording time will be shorter.

This addendum contains clarifications and a sharpening of some of the results on the VIT transform framework developed in [1]. The focus is on the right-coefficient and left- coefficient forms of the transform, the extraction of a first-order term from a left polynomial fraction, and the application to linear time-varying systems.

We have introduced a sign operator of energy, analogous to the operator helicity, but in the direction of what we call energy vector. However, this energy vector needs a time vector. To give physical senses to the components of such a time vector, we try to explain the time dilation in special relativity and try to relate the components of the time vector to the tunneling times when an electron crosses a potential barrier.

Climate change such as sea level rise, change in temperature, precipitation, and storminess are expected to impact significantly coastal lagoons. The nature and magnitude of these impacts are uncertain. The objective of the research is to determine the climate change impacts on mixing and circulation at Songkhla lagoon, Thailand. Songkhla lagoon is the largest lagoonal water resource in Thailand and Southeast Asia. The lagoon is a combined freshwater and estuarine complex of high productivity which represents an extraordinary combination of environmental resources believed to be unique in the region. This work is part of a Climate Change impact assessment framework. It is the validation phase (step 5) of the framework applying a case study. Delft 3D was used to simulate CC scenarios in the climate downscaling models, part of the previous framework steps. These results were compared to the current conditions to determine the main changes in mixing and circulation in the coastal lagoon. Three indicators were applied to quantify the impacts: flushing time, salinity intrusion and stratification. The results suggest an increase in water velocities at the inlet in future scenarios and a decrease of flushing time. Salinity and stratification showed more complex changes in futures scenarios.

A number of experimental tests of time orientability are described as well as clear experimental signatures from non time orientability (time reversal). Some tests are well known, while others are based on more recent theoretical work. Surprisingly, the results all suggest that time is not orientable at a microscopic level; even definitive tests are positive. At a microscopic level the direction of time can reverse and a consistent forward time direction cannot be defined. That is the conclusion supported by a range of well-known experiments. The conflict between quantum theory and local realism; electrodynamics with electric charges; and spin half transformation properties of fermions; can all be interpreted as evidence of time reversal. While particle-antiparticle annihilation provides a definitive test. It offers both a new view of space-time and an novel interpretation of quantum theory with the potential to unify classical and quantum theories.

Efficient fixed crane position analysis is critical in precast buildings construction to maximize lifting efficiency for precast elements. The primary objective is to minimize the travel distances of fixed cranes, thereby enhancing operational efficiency and cost control. This involves strategically reducing the distances between the transport truck parking, where elements are stored, the fixed crane, and the construction installation point. Despite its significance, existing studies often overlook the dynamic movement efficiency of transport trucks, particularly when dealing with multiple transport trucks and various models of fixed cranes, rendering the opti-mization of this scenario a challenging NP-hard problem susceptible to combinatorial explosion. This study presents a novel mathematical model leveraging the Genetic Algorithm (GA). The model aims to solve optimal model and position of fixed cranes, along with identifying ideal positions for transport truck parking. The study's methodology is validated and demonstrated through a project case study. Comparative analyses between the proposed model and the original planning underscore a noteworthy 6% reduction in both duration and costs when lifting elements directly from transport trucks, as opposed to establishing an on-site stock yard. Furthermore, the developed GA exhibits a substantial improvement in final solutions, achieving a remarkable 30% reduction in both operational duration and costs. This research contributes valuable insights into fixed crane position analysis of precast building construction, providing foundation for enhanced operational efficiency and cost-effectiveness in the industry.

This paper presents laboratory devices on which experimental measurements were carried out to prove the validity of the assumption about the reduction of vibrations transmitted to the conveyor belt structure generated by the impact forces of falling material grains in the places of transfer or on the hoppers of conveyor belts. In order to limit damage to the conveyor belts caused by the impact of the sharp edges of material grains, conveyor belts are supported by impact rollers or impact rubber rods in the places of transfers and on the hoppers of belt conveyors. The flattened ends of the impact rollers are inserted into the grooves of steel brackets installed on the supports of the fixed conveyor idlers of a conventional design. In this paper, a special modification of the fixed conveyor idler is presented, which consists of inserting plastic brackets into the structurally modified roller axle holders of the fixed conveyor idler. Measurements were carried out on the first laboratory device, which showed that the specially modified fixed conveyor idler resulted in a higher damping of up to 15% of the impact forces of the falling weight on the rubberized hoop of the impact roller shell compared to the conventional fixed conveyor idler design. Measurements carried out on the second laboratory device show that the effective vibration velocity values detected at the points where the impact roller axis fits into the fixed roller table holder, i.e. points B and D, are higher than when using plastic brackets, up to 6% for a 108 mm diameter roller, compared to steel impact roller brackets.

This paper presents a mathematical modeling approach utilizing a fuzzy modeling framework for fixed wing aircraft systems with the goal of creating a highly desirable mathematical representation for model-based control design applications. The starting point is a mathematical model comprised of fifteen non-linear ordinary differential equations representing the dynamic and kinematic behavior applicable to a wide range of fixed wing aircraft systems. Here the proposed mathematical modeling framework is applied to the AIRBUS A310 model developed by ONERA. The proposed fuzzy modeling framework takes advantage of sector non-linearity techniquesto recast all the non-linear terms from the original model to a set of combined fuzzy rules. The result of this fuzzification is a more suitable mathematical description from the control system design point of view. Therefore, the combination of this fuzzy model and the wide range of control techniques available in the literature for such kind of models will enable us to avoid common control design methods, such as gain scheduling, where stability issues can be extremely challenging.

This paper brings to fruition recently found \cite{migdal2023exact} exact reduction of decaying turbulence in the Navier-Stokes equation in $3 + 1$ dimensions to a Number Theory problem of finding the statistical limit of the Euler ensemble. We reformulate the Euler ensemble as a Markov chain and show the equivalence of this formulation to the \textbf{quantum} statistical theory of $N$ fermions on a ring, with an external field related to the random fractions of $\pi$. We find the solution of this system in the turbulent limit $N\to \infty, \nu \to 0$ in terms of a complex trajectory (instanton) providing a saddle point to the path integral over the density of these fermions. This results in an analytic formula for the observable correlation function of vorticity in wavevector space. This is a full solution of decaying turbulence from the first principle without approximations or fitted parameters. The energy spectrum decays as $k^{-\frac{7}{2}}$. We compute resulting integrals in \Mathematica{} and present effective index $n(t) = -t\partial_t \log E $ for the energy decay as a function of time Fig.\ref{fig::NPlot}. The asymptotic value of the effective index in energy decay $n(\infty) = \frac{5}{4}$, but the universal function $n(t)$ is neither constant nor linear.

We consider a Cauchy problem for differential equations in a Hilbert space $X$. The problem is stated in a time interval $I$, which can be finite or infinite. Weuse a fixed point argument for history-dependent operators to prove the unique solvability of the problem. Then, we state and prove convergence criteria for both a general fixed point problem and thecorresponding Cauchy problem. These criteria provide necessary and sufficient conditions on a sequence $\{u_n\}$ which guarantee its convergence to the solution of the corresponding problem, in the space of both continuous and continuously differentiable functions. We then specify our results in the study of a particular differential equation governed by two nonlinear operators. Finally, we provide an application in viscoelasticity and give a mechanical interpretation of the corresponding convergence result.

We have found an infinite dimensional manifold of exact solutions of the Navier-Stokes loop equation for the Wilson loop in decaying Turbulence in arbitrary dimension $d >2$. This solution family is equivalent to a fractal curve in complex space $\mathbb C^d$ with random steps parametrized by $N$ Ising variables $\sigma_i=\pm 1$, in addition to a rational number $\frac{p}{q}$ and an integer winding number $r$, related by $\sum \sigma_i = q r$. This equivalence provides a \textbf{dual} theory describing a strong turbulent phase of the Navier-Stokes flow in $\mathbb R_d$ space as a random geometry in a different space, like ADS/CFT correspondence in gauge theory. From a mathematical point of view, this theory implements a stochastic solution of the unforced Navier-Stokes equations. For a theoretical physicist, this is a \textbf{quantum} statistical system with integer-valued parameters, satisfying some number theory constraints. Its long-range interaction leads to critical phenomena when its size $N \rightarrow \infty$ or its chemical potential $\mu \rightarrow 0$. The system with fixed $N$ has different asymptotics at odd and even $N\rightarrow \infty$, but the limit $\mu \rightarrow 0$ is well defined. The energy dissipation rate is analytically calculated as a function of $\mu$ using methods of number theory. It grows as $\nu/\mu^2$ in the continuum limit $\mu \rightarrow 0$, leading to anomalous dissipation at $\mu \propto \sqrt{\nu} \to 0$. The same method is used to compute all the local vorticity distribution, which has no continuum limit but is renormalizable in the sense that infinities can be absorbed into the redefinition of the parameters. The small perturbation of the fixed manifold satisfies the linear equation we solved in a general form. This perturbation decays as $t^{-\lambda}$, where the anomalous dimensions $\lambda$ satisfy the spectral equation \eqref{spectralEq}. The spectrum becomes a continuum in the statistical limit $N \to \infty$, presumably leading to multifractal phenomena.

Breakthrough curves for the adsorption of H2S using a metal-oxides mixture were predicted using the Bohart-Adams model of fixed bed adsorption. This mixture (ZnMn2O4+ZnO+Mn2O3) came from the processing of an urban waste as spent alkaline batteries were. The H2S adsorption experiments were carried out in a fixed-bed column at 20º C, and under various experimental conditions: gas flow rate, inlet H2S concentration and adsorbent dosage. Curves predicted by the model matched well with experimental data, providing data for the possible scale-up of the system. At the various experimental variables, the efficiency of the column, were also provided in the work. This investigation demonstrated the usefulness of a waste material, like spent alkaline batteries, to provide an adsorbent material to mitigate the problem of the presence of this harmful gas.

This work aims to investigate the effect of catalyst content and reaction time by catalytic upgrading from pyrolysis vapors of residual fat at 450 °C and 1.0 atmosphere, on the yields of reaction products, physicochemical properties (density, kinematic viscosity, refractive index, and acid value) and chemical composition of organic liquid products (OLP), over a catalyst fixed bed reactor, in semi pilot scale. Pellets of Red Mud chemically activated with 1.0 M HCl were used as catalysts. The experiments were carried out at 450 °C and 1.0 atmosphere, using a process schema consisting of a thermal cracking reactor of 2.0 L coupled to a catalyst fixed bed reactor of 53 mL, without catalyst and using 5.0, 7.5, and 10.0% (wt.) Red Mud pellets activated with 1.0 M HCl, in batch mode. Samples of liquid phase products were withdrawn during the course of reaction at 40, 50, 60, 70 and 80 min in order to analyze the process kinetics. The physicochemical properties (density, kinematic viscosity, acid value, and refractive index) of OLP were determined by official methods. The chemical functions present in OLP determined by FT-IR and the chemical composition by GC-MS. The thermal catalytic cracking of residual fat show OLP yields from 54.4 to 84.88 (wt.%), aqueous phase yields between 2.21 and 2.80 (wt.%), solid phase yields (coke) between 1.30 and 8.60 (wt.%), and gas yields from 11.61 to 34.22 (wt.%). The yields of OLP increases with increasing catalyst content while those of aqueous, gaseous and solid phase decreases. For all the thermal and thermal catalytic cracking experiments, the density, kinematic viscosity, and acid value of OLP decreases with increasing reaction time. The GC-MS of liquid reaction products identified the presence of hydrocarbons (alkanes, alkenes, cycloalkanes, and aromatics) and oxygenates (carboxylic acids, ketones, esters, alcohols, and aldehydes). For all the thermal and thermal catalytic cracking experiments, the hydrocarbon content within OLP increases with reaction time, while those of oxygenates decrease, reaching concentrations of hydrocarbons up to 95.35% (area.). The best results for the physicochemical properties (density, kinematic viscosity, and acid value) and the maximum hydrocarbon content of OLP were obtained at 450 °C and 1.0 atmosphere, using a catalyst fixed bed reactor, with 5.0% (wt.) Red Mud pellets activated with 1.0 M HCl as catalyst.

In this paper, we consider the generalized sextic functional equation \begin{align*} \sum_{i=0}^{7}{}_7 C_{i} (-1)^{7-i}f(x+iy) = 0. \end{align*} And by applying the fixed point theory in the sense of L. C\u adariu and V. Radu, we will discuss the stability of the solutions for this functional equation.

This paper deals with the study of the existence and non existence of solutions of a three parameter's family of nonlinear fractional differential equation with mixed-integral boundary value conditions. We consider the $\alpha$-Riemann-Liouville fractional derivative, with $\alpha \in (1,2]$. In order to deduce the existence and non existence results, we first study the linear equation, by deducing the main properties of the related Green's functions. We obtain the optimal set of parameters where the Green's function has constant sign. After that, by means of the index theory, the nonlinear boundary value problem is studied. Some examples, at the end of the paper, are showed to illustrate the applicability of the obtained results.

In this article, we show the existence of fixed point for the derivative of interval-valued functions. Meanwhile, the fixed point inquiry will utilize the common fixed point methods under the condition of compatibility of the hybrid composite mappings in the sense of the Hausdorff metric. Some examples are given to support the usability of the result of this research .

With the increasing of copper consumption, the in-use stock of copper tends to increase. This paper used the “average use life method” to quantify the amount of copper in-use stock, and calculated the average age of in-use stock. It was indicated that the total in-use stock had an overall smooth trends, and reached its peak in 2007 was about 68.9 Mt (million tons), in addition, in-use stock per capita reached its peak ,234 kg/capita in 2001. The results demonstrated that during the period 1992-2002, the average age of copper in-use stock was continually decreased, but gradually increased since the year 2003. The fixed assets depreciation method used in this paper is applied to analyze depreciated copper in-use stock, and to analyze the relationship with economic indicator (GDP). It is demonstrated that it was inconsistent with the theory of Environmental Kuznets Curve (EKC) before 2000, this might be the demand for copper in the service sector is greater than the reduced strength of alternatives. Finally, scenario analysis of future copper in-use stock and depreciated copper in-use stock per capita in the U.S. were presented. The corresponding average age of the in-use stock will have a slight rise in the next decade.

Can physical objects be in time-symmetry? Physical objects can only exist in a medium that has physical attributes, which means this medium is a type of energy. Is time energy? This article will show that time is not energy and there is no possibility that physical objects could be in time-symmetry. Physical objects only can be in symmetry in the time-invariant space in which they exist. In this perspective time measured with clocks is the result of the observer’s measurement in the time-invariant space. The time-symmetry model is flawed.

Capacity Expansion Models (CEMs) are optimization models used for long-term energy planning on national to continental scale. They are typically computationally demanding, thus in need of simplification, where one such simplification is to reduce the temporal representation. This paper investigates how using representative periods to reduce the temporal representation in CEMs distorts results compared to a benchmark model of a full chronological year. The test model is a generic CEM applied to Europe, equipped with a novel formulation for storage in model versions with reduced temporal representation. We test the performance of reduced models at penetration levels of wind and solar of 90%. Three measures for accuracy are used: (i) system cost, (ii) total capacity mix and (iii) regional capacity. We find that: (i) the system cost is well represented (~5% deviation from benchmark) with as few as ten representative days, (ii) the capacity mix is in general fairly well (~20% deviation) represented with 50 or more representative days, and (iii) the regional capacity mix displays large deviations (>50%) from benchmark for as many as 250 representative days. We conclude that modelers should be aware of the error margins when presenting results on these three aspects.

Today, due to recent developments in technology, children devote plenty of time for screen viewing. However, its harmful effects are not yet clear. The purpose of present study was to examine the associations among screen viewing and sleep duration, and body mass index (BMI) in under-five years old children. This cross-sectional study was conducted with 322 under-five healthy children that were selected using multistage stratified cluster sampling method in 2017. The data that were gathered by time-use diary method were analyzed using Kolmogorov-Smirnov test, Spearman correlation tests, multiple linear regression analysis, one-way ANCOVA, two-way ANCOVA. There was a negative correlation between screen time and sleep duration (rs = -0.42, p = 0.00), positive correlation between screen time and BMI (rs = 0.38, p = 0.00) and sleep duration negatively correlated with BMI (rs = -0.22, p = 0.00). screen viewing was a predictive factor for both sleep duration (β = -0.26, p = 0.00) and BMI (β = -0.26, p = 0.00). screen viewing had a significant impact on sleep duration (4, 314) = 5.02, P = 0.001) and BMI (F (4, 314) = 1.16, P=0.298). Results of this study indicated that screen viewing is related to sleep duration and BMI in under-five children. furthermore, screen time has an impact on sleep duration and BMI scores of children. findings of our study suggest that sleep duration negatively is associated with BMI in under-five-year-old children.

With the continuous update of gene editing technology, great progress has been made in livestock breeding, researchers have produced gene edited pigs, cattle, sheep and other improved livestock. Gene editing technology is a genetic means to knock in, knock out, delete, inhibit, activate or replace specific bases of DNA or RNA sequences at the genome level to achieve accurate modification, and can edit genes at a fixed point without the need for DNA templates. In recent years, although regular clusters of interspaced short palindromic repeats (CRISPR)/Cas9 system mediated gene editing technology has been widely used in animal genetic breeding research, but so far, the system's precise insertion efficiency of foreign genes is not high enough, and there are certain off-target effects, and it is not enough to be used in genome editing of large livestock such as cashmere goats. In this paper, the development status, challenges, application prospects and look into the distance of CRISPR/ Cas9-mediated precisiongene editing technology in livestock breeding were reviewed, in order to provide theoretical reference for livestock gene function analysis, genetic improvement and livestock breeding with local economic characteristics.

The article outlines a creative approach by fusing ideas from fuzzy contractions, graph mappings, and Kannan mappings to create a brand-new notion known as "Kannan-graph-fuzzy contraction." This combination of concepts makes it possible to create a unique framework for resolving real-world issues controlled by nonlinear models. It is anticipated that using Kannan-graph-fuzzy contractions will offer a fresh approach to discussing solution existence in situations where these ideas overlap. This strategy might have a significant impact on a lot of real-world applications, proving how practical multidisciplinary techniques are for tackling issues in the real world originating from technology and engineering. The article includes several illustrated examples based on computer simulations, making the results more explicit.

The aim of this paper is to deep into the dynamic study of the well known Chebyshev-Halley family of iterative methods for solving nonlinear equations. Our objetives are twofold: one the one hand, we are interested in characterize the existence of extraneous attracting fixed points when the methods in the family are applied to polynomial equations. On the other hand, we are also interested in study the free critical points of the methods in the family, as a previous step to determine the existence of attracting cycles. In both cases, we want to identify situations where the methods in the family have a bad behavior from the root-finding point of view. Finally, and joining these two studies, we look for polynomials for which there are methods in the family where this two situations happen simultaneously. That is, the rational map obtained by applying a method in the Chebyshev-Halley family to a polynomial has both super-attracting extraneous fixed point and super-attracting cycles different to the roots of the polynomial.

The impacts of COVID-19 (Novel Coronavirus) epidemic cannot have been more severe, with the globe experiencing both economic and health crises. This study examines the trends and correlations in number of COVID-19-related deaths and number of COVID-19-infected patients in all 37 regions of Tamil Nadu state, India, in the month of August 2020 on the basis of panel regression model,

This paper presents an extended Kalman filter derivation for loosely coupled GPS (Global Positioning System)/INS (Inertial Navigation System) integration based on quaternion attitude representation using the Earth-Centered Earth (ECEF) Frame. In this loosely coupling integration, both the position and velocity estimates from GPS receiver are used as the measurements to extended Kalman filter, and then they are integrated with inertial measurements from inertial measurement units (IMU) to estimate the attitude, position and velocity of an air vehicle. The velocity estimates which have centimeter level estimation error from the GPS receiver are used to improve the filter performance. For attitude estimation, the global attitude parameterization is given by a quaternion and a multiplicative quaternion-error approach is used to guarantee a normalization constraint of quaternion in the filter. Simulation results are shown to obtain the estimation of the attitude, position, velocity, biases and scale factors and to evaluate the performance of the EKF with the measurement combination composed of the two different t

Renewable energy sources will play a central role in the sustainable energy systems of the future. Scenario analyses of such hypothesized energy systems require sound knowledge of the techno-economic potential of renewable energy technologies. Although there have been various studies concerning the potential of offshore wind energy, higher spatial resolution, as well as the future design concepts of offshore wind turbines, has not yet been addressed in sufficient detail. Here, we aim to overcome this gap by applying a high spatial resolution to the three main aspects of offshore wind potential analysis, namely ocean suitability, the simulation of wind turbines and cost estimation. A set of constraints is determined that reveal the available areas for turbine placement across Europe’s maritime boundaries. Then, turbine designs specific to each location are selected by identifying turbines with the cheapest levelized cost of electricity (LCOE), restricted to capacities, hub heights and rotor diameters of between 3-20 MW, 80-200 m and 80-280 m, respectively. Ocean eligibility and turbine design are then combined to distribute turbines across the available areas. Finally, LCOE trends are calculated from the individual turbine costs, as well as the corresponding capacity factor obtained by hourly simulation with wind speeds from 1980 to 2017. The results of cost-optimal turbine design reveal that the overall potential for offshore wind energy across Europe will constitute nearly 8.6 TW and 40.0 PWh at roughly 7 €_ct kWh^-1 average LCOE by 2050. Averaged design parameters at national level are provided in an appendix.

In this paper, by means of the Banach fixed point theorem and the Krasnoselskii's fixed point theorem, we investigate the existence of solutions for some fractional neutral functional integro-differential equations involving infinite delay. This paper deals with the fractional equations in the sense of Caputo fractional derivative and in the Banach spaces. Our results generalize the previous works on this issue. Also, an analytical example is presented to illustrate our results.

In this paper, the concept of absolute airspace is further elaborated, and the time transform effect, the frequency transform relation of clock timing, and the principle of Doppler effect of special relativistic light are analyzed and demonstrated. Based on the concept of absolute airspace, a new and accurate Doppler effect relation of light (electromagnetic wave) is proposed. It is proved that there is a synchronous relationship between the time shift effect and the frequency change of the timing inside the clock. When the light (electromagnetic wave) source is in motion, the Doppler effect includes two physical mechanisms: the frequency change caused by time transformation effect and the frequency change caused by relative motion. When the light source is in motion, the Doppler effect of the light there are some differences in different directions due to the rotation of the earth. The relation of Doppler effect of special relativistic light is only a highly approximate relation, and its theoretical basis, special relativity, is flawed in principle.

Effects and interactions of incubation time and chick preplacement holding time on mortality at placement, utilization of yolk sac, crop filling rate, early feeding–drinking behavior and broiler live performance were investigated. Ross 308 broiler hatching eggs from a 39-week-old flock were set in two identical setters in a commercial hatchery,with setting time 12 hours earlier in one machine. At the end of incubation, chicks were removed from the hatchers at the same time. Thus, incubation times were either 504 h (normal incubation time (NIT) treatment) or 516 h (longer incubation time (LIT) treatment). After pull time, chicks from each incubation time group were subjected to either 6, 24, 48, 60 or 72 h preplacement holding times. At placement, chicks were given access to feed and water. In total, 19,200 chicks were randomly assigned to a total of 10 subtreatment groups (2 incubation times × 5 preplacement holding times). Therefore, a total of 1,920 chicks were used in each subtreatment group for the grow-out period in a commercial broiler house. An interaction was found between incubation time and preplacement holding time for residual yolk sac (RYS) weight (g, %) (p &lt; 0.001). RYS weight was greater at pull time and at 6 and 24 h of preplacement holding time in the NIT treatment compared to the LIT treatment, while differences were no longer evident at 48–72 h. The lowest percentage of chicks with full crops and eating activity was observed in the shortest preplacement holding time (6 h) group at 3 h after placement. As expected, the initial BW at placement clearly decreased with increasing duration after the pull time (p &lt; 0.05) with the highest and lowest weights were found in the 6 and 72 h holding time treatments respectively. This BW difference was still evident at 35 d after placement and chicks held for the longest period after the pull time (72 h) showed the lowest BW (p &lt; 0.001). However, there was no significant difference between the 6 and 60 h preplacement holding times. Mortality during the first 7 d after placement increased only when the preplacement holding time was extended to 72 h (p = 0.031). Similar to the 7 d results, chicks held for 72 h exhibited higher 0-35 day mortality compared to those held for 6 or 24 h (p = 0.028). Neither BW nor mortality was affected by incubation time treatment at 35 d after placement (p &gt; 0.05). It can be concluded that there were no significant differences in average BW and mortality, up to and including a 60-h holding time under thermal comfort conditions, but a 72-h preplacement holding time resulted in final BW and mortality being negatively affected. In addition, LIT tended to have a beneficial effect on BW and mortality compared to NIT when the preplacement holding time was shorter (6–24 h) but had a negative effect for extended holding times (48–72 h).

On the basis of the findings of this paper, the theories of quantum mechanics and general relativity can be expressed in a comprehensive theory. The events were surveyed length of the time, in the Euclidean six-dimensional space-time (R6=x1+x2+x3+t1+t2+t3). Previous studies have not studied the relationship between the origin of matter's inherent properties, fundamental constants, and quantum mechanics phenomenon with space-time geometry. This theory prediction the with certainty obtained probabilistic results of quantum mechanics. This prediction is on the basis of metric resulting from the Eccentricity of the Ellipse due to the object density, in the length of time. The cause and nature of dark matter and dark energy are the findings of this article.

Noise model selection criteria has a significant impact on identifying the stochastic noise proper-ties of any GNSS daily coordinate time series. The low-frequency random walk noise existing in these time series could lead to overestimation of the tectonic rate, so it is of great significance to accurately detect the random walk component. This study focuses on noise model estimation cri-terion (BIC_tp) derived from the AIC and the BIC by introducing 2π factors. It is more sensitive to abnormal steps (random jumps). Using observation data from 72 GNSS stations from 1992 to 2022 and simulated data, four combined noise models are used to explore the impacts of time se-ries lengths (ranging from2 to 24 years) and data loss (between 2% and 30%) on noise models and velocity estimation. The results show that as the time length increased, the selected optimal noise model, and the estimated uncertainty of the tectonic trend with different data gap, gradually con-verge. When the time length is short (less than 8 years), it could lead to the FNRWWN, FNWN, and PLWN models being mistakenly estimated as GGMWN models, thereby affecting the accura-cy of determining the station velocity parameters. When the time length is 12 years, the RW noise component is more probably detected, As the time length increases, the impact of RW on velocity uncertainty is weakened. Finally, we conclude that for a time series with a minimum time length of 12 years, both the selection of the optimal stochastic noise model and the estimation of the ve-locity parameters are reliable.

The gelation time tg necessary for a solution of functional (associating) molecules to reach its gel point after a temperature jump, or a sudden concentration change, is theoretically calculated as a function of the concentration and temperature for the molecules carrying the number f of functional groups. Quite generally, tg is given by the product of the relaxation time tR and a thermodynamic factor Q. For pairwise cross-linking, and cross-linking with a fixed multiplicity k, precise values of tg are derived. For cross-linking with variable multiplicity, kinetic equation of stepwise association is derived for the reactivity pk of the functional groups, on the basis of which tg and tR are estimated. The thermodynamic factor Q is shown to generate a singularity of logarithmic divergence as the temperature (concentration) approaches the equilibrium gel point, while the relaxation time tR changes continuously across it. The retardation effect on the gelation time due to the reversibility of the cross-linking is explicitly calculated for some specific models of cross-linking. For a micellar cross-linking covering a wide range of the multiplicity, as seen in hydrophobically-modified water-soluble polymers, tR is shown to obey a formula similar to the Aniansson-Wall law.

We are using the book “Towards Quantum Gravity with an article by Claus Kiefer as to a quantum gravity interpretation of the density matrix in the early universe. The density matrix we are using is a one loop approximation, with inflaton value and potential terms, like V(phi) using the Padmanabhan values one can expect if the scale factor is a ~ a(Initial) times t ^ gamma , from early times . In doing so, we isolate out presuming a very small initial time step candidates initial time values which are from a polynomial for time values due to the Kiefer Density value.

In this paper, we study the Parisian time of a reflected Brownian motion with drift on a finite collection of rays. We derive the Laplace transform of the Parisian time using a recursive method, and provide an exact simulation algorithm to sample from the distribution of the Parisian time. The paper is motivated by the settlement delay in the real-time gross settlement (RTGS) system. Both the central bank and the participating banks in the system are concerned about the liquidity risk, and are interested in the first time that the duration of settlement delay exceeds a predefined limit, we reduce this problem to the calculation of the Parisian time. The Parisian time is also crucial in the pricing of Parisian type options; to this end, we will compare our results with the existing literature.