Anthropogenic development can strongly influence natural river processes, leading to environmental changes that negatively affect important habitats and biodiversity, and consequently reduce economically important natural resources. This study investigated the effects of salinity intrusion on the habitat of the clam Corbicula japonica in the Seomjin River estuarine zone. We employed the Environmental Fluid Dynamics Code (EFDC) model, which incorporates topographic data and hydrological changes, to simulate salinity concentrations. Two salinity measurement facilities were installed in Seomjin River estuarine and operated to optimize the EFDC model. The results show that reduced flow rates due to intake have a negligible impact on the increased salinity. Maintaining optimal salinity (15–20 psu) during neap tides at the Seomjin River Bridge requires constant high flow rates, which poses significant challenges. Saltwater stratification is identified as the primary cause of pronounced salinity stratification, particularly during neap tides. Addressing this issue through river discharge and intake facility operation is challenging. Structural measures, including riverbed restoration and underwater barriers, are recommended to improve resistance to seawater intrusion. Future research should aim to develop scenarios to reduce salinity concentrations, quantify the reduction efficiency, and propose region-specific measures.

Despite being stored at 113 K and atmospheric pressure, LNG cold potential is not exploited to reduce green ships’ energy needs. An innovative system based on three Organic Ranking Cycles integrated into the regasification equipment is proposed to produce additional power and recover cooling energy from condensers. A first-law analysis identified ethylene and ethane as suitable working fluids for the first and the second ORC making available freshwater and ice. Propane, ammonia and propylene could be arbitrarily employed in the third ORC for air-conditioning. An environmental analysis that combines exergy efficiency, ecological indices and hazard aspects for marine environment and ship’s passengers, indicated propylene as safer and more environmentally friendly. The exergy analysis confirms more than 20% of the LNG potential can be recovered from every cycle to produce a net clean power of 76 kW, whereas 270 kW can be saved by recovering condensers' cooling power to satisfy some ship needs. Assuming the sailing mode, a limitation of 162 kg in LNG consumptions was determined, avoiding the emission of 1584 kg of CO2 per day. Marine thermal pollution is reduced by 3.5 times by recovering the working fluids' condensation heat for the LNG pre-heating.

Greek yogurt (GY), a high-protein-low-fat dairy product, particularly prized for its sensory and nutritional benefits, revolutionized the North American yogurt market in less than a decade, bringing with it new sustainability challenges. The standard production of GY generates large volumes of acid whey, a co-product that is a potential source of environmental pollution if not recovered. This study aims to assess the environmental performance of different technologies and identify the main factors for improving GY production. A complete life cycle assessment (LCA) was performed to compare the standard technology (centrifugation) with two new technologies (fortification and ultrafiltration) to reduce acid whey volumes. Three milk protein concentrate alternatives were also assessed. Results show that the technology choice is not a clear discriminant factor. However, minimizing losses and wastage (accounting for 23 to 25% of the environmental impacts for all indicators) beyond the processing plant and selecting milk ingredients (accounting for 63 to 67% of the impacts) with low environmental impacts are key factors in improving the environmental performance of GY systems. From a methodological perspective, the results also highlight a shortcoming in the current International Dairy Federation LCA guidelines (2015) for treating the multifunctionality of GY systems.

Keywords: Biomass pyrolysis, Chemical Looping Combustion, Life Cycle Assessment, Environmental Impacts, Carbon Footprint.

Background: The study aimed to investigate the association between environmental tobacco smoke exposure and the risk of wheezing among rural and urban preschool children in Mpumalanga province, South Africa, an area associated with poor air quality. Methods: In this study, parents/caregivers of preschool children (n=3145) completed a modified International Study of Asthma and Allergies in Childhood (ISAAC) questionnaire. Data were analysed using multiple logistic regression models. Results: The overall prevalence of Wheeze ever was 15.14%, with a higher prevalence in urban pre-schoolers than rural pre-schoolers (20.71% vs 13.30 %, P<0.000). Moreover, the total prevalence of asthma ever was 2.34%. The prevalence was greater in urban pre-schoolers than in rural pre-schoolers (3.92% vs 1.81%, P<0.001). In the final adjusted model, both urban and rural area children who lived with one or more people who smoked in the same household (WE: OR 1.44, 95% CI 1.11-1.86) (CW: OR 2.09, 95% CI 1.38-3.16) and (AE: OR 2.49, 95% CI 1.12-5.54) were found to have an increased likelihood of having Wheeze Ever, Current Wheeze and Asthma Ever as compared to those who lived with non-smokers. Conclusions: The implementation of smoking limits and prohibition is crucial in areas that are frequented or utilized by children. Hence, it is imperative for healthcare providers to actively champion the rights of those who do not smoke within the society, while also endorsing legislative measures aimed at curtailing the extent of tobacco smoke exposure.

Hyperspectral imaging data holds great potential for the different stages of the mining life cycle in active and post-mining environments. However, the technology has yet to reach the stage of large-scale industrial implementation and acceptance. While hyperspectral satellite imagery can achieve high spectral resolution, signal-to-noise ratio (SNR) and global availability with break-through satellite systems like EnMAP, EMIT and PRISMA, limited spatial resolution poses chal-lenges for sectors like mining, which require decimetre to centimetre scale resolution for applica-tions such as reconciliation, ore/waste estimates, geotechnical assessments and environmental monitoring. Hyperspectral imaging from drones (referred to herein as Uncrewed Aerial Systems; UASs) offers high spatial resolution data relevant to the camp/ mine scale, with the capability for frequent, user-defined re-visit times. This has been made possible by the miniaturization of hy-perspectral imaging systems. Collection of data in the visible to near and shortwave infrared (VNIR-SWIR) wavelength regions enables the detection of different minerals and surface altera-tion patterns potentially revealing crucial information for exploration, extraction, re-mining, waste remediation, and rehabilitation. In this paper, we provide a review of relevant studies de-ploying hyperspectral imaging in or applicable to the mining sector, especially for the use of hy-perspectral VNIR-SWIR Uncrewed Aerial Systems. Where required, we draw on previous in-sights derived from satellite or ground-based systems. We also discuss UAS survey planning, and sampling considerations for validation and interpretation.

This paper utilizes a life cycle assessment to evaluate the energy resources and environmental impacts of three heating systems. In the first step, life cycle assessments (LCAs) are prepared for the renewable, conventional, and combined systems. The system boundary of the LCA method is "cradle to gate," which means it includes the entire life cycle of a product or process. This includes energy supply, transport, energy generation, and operational energy use. The system scenarios were compared based on ecological and energy loads in the second step. Primary energy, resources, emissions, and environmental potentials are calculated for the system scenarios using the life cycle assessment methods CML 2016 and ReCiPe 2016. Finally, models for environmental reliability and complex decision-support tools have been developed. This work addresses two main questions: how to characterize the environmental and energy impacts of the systems under study, and what is the optimal scenario for the system? The research results show that the gas boiler system has a greater environmental impact. The most significant differences between the systems relate to the degrada-tion of abiotic fossil fuels when using a gas boiler and the process of acidification when using an electric heat pump. The results can be used to develop sustainable heating systems with reduced environmental impacts and enhanced energy efficiency.

Agriculture sector is the backbone of developing countries for their economy. Growing world’s population is putting more pressure on agriculture sector and there is a need to develop new technology to address the crises of food safety and food shortage. Today’s agriculture has been entered in a new era where nanotechnology works as a technological advancement regarding entire agriculture crops, and food sector revolution, even though, it has prodigious applications in food production, food processing, food packaging, food storage and economic growth of industries. Moreover, nanotechnology is the best solution to solve problems related to better food and agriculture. Likewise, biotechnology, nanotechnology also raised high concerns upon safety on biodiversity, health and environment. Nanotechnology is providing efficient alternatives to increase the crop production by managing the insect/pests in agriculture in an eco-friendly manner. It also promotes plant efficiency to absorb nutrients. However, the concerns are very high regarding regulation, safety and approval of nanotechnology products by risk assessment authorities. The suggested review includes stupendous applications of nanotechnology in food and agriculture sector along with its prospective merits and associated risks.

Ultrasound, as mechanical waves with frequencies exceeding 20 thousand hertz, has found wide applications in medicine, physiotherapy, and more recently in agriculture. This study aimed to investigate the impact of ultrasound on potato yield and its parameters, particularly on seed potato yield, quantity, mass, and multiplication coefficient of potato tubers. The research was based on a three-year field experiment, utilizing the randomized block design in a split-split-plot arrangement, in the central-eastern region of Poland. The primary factor were technologies: a) technology with employing ultrasonic pre-planting treatment, b) traditional cultivation without this treatment. The secondary factors were potato varieties. Sonication of tubers was conducted using a bath-type ultrasonic device equipped with piezoe-lectric transducers. Results revealed a significant influence of cultivation technology, cultivar, and weather conditions on seed tubers yield, quantity, and multiplication coefficient of potato tubers. However, genetic traits of the examined varieties and random factors significantly affected the individual seed tuber mass and the number of shoots emerging from a single tuber. Future Outlook: Future research could focus on further optimizing ultrasound application techniques in potato cultivation, considering diverse varieties and environmental conditions. Additionally, it would be worthwhile to analyze the long-term effects of ultrasound on tuber seed potato quality and their ability to adapt to changing climatic and soil conditions. Furthermore, studies investi-gating the impact of ultrasound on other plant species could broaden our understanding of po-tential benefits in agriculture.

Current and dynamic developments in green technologies have led to several innovation practices in the manufacturing sector only to become the top approaches used for achieving and accelerating sustainable development (SD) in the current business markets. In addition, manufacturing firms is in need of green innovation to be able to monitor and control their operations and enhance their environmental performance. However, regardless of its many benefits, the level of green innovation adoption and implementation is still lower than expected among manufacturing industries. Thus, this study aimed to minimize the gap by developing and validating a study model underpinned by Resource based view and Institutional theories, along with the Technology-Organization-Environment (TOE) framework in combination to convince firms to adopt green innovation. The study gathered data from 179 respondents using a survey distributed to manufacturing firms, after which data was exposed to Structural Equation Modeling (PLS-SEM) approach, for analysis. Based on the approach deliverables, all the integrated constructs of the model, namely perceived benefits, top management support, coercive pressure, normative pressure and mimetic pressure all predicted green management accounting practices. Moreover, green management accounting practices were found to directly and significantly affect green environmental performance. The developed integrated model provides a clear implication to decision-makers, indicating the importance of adopting and using green practices and innovative technologies for enhancing environmental performance. Based on the results from the reviewed advanced green technologies studies, there is considerable connection between green management accounting practices and environmental performance in the context of developing economies.

There is increasing demand from stakeholders for tools to support outcome-based approaches in environmental management. For such tools to be useful, understanding user requirements is key. In Scotland, UK, stakeholders were engaged in the development of an Environmental Decision Support System (EDSS) to support the management of land and freshwater resources for multiple policy outcomes. A structured participatory engagement process was employed to determine stakeholder requirements, establish development principles to fulfil these requirements and road-test prototypes. The EDSS specification that emerged from this bottom-up process was spatially-explicit, free at the point of use, and touch and mobile device compatible. This application, which is under development, does not closely resemble most existing published EDSS. We suggest that there is a mismatch between the way scientists typically conceptualise EDSS and the kinds of applications that are likely to be useful to decision-makers on the ground. Interactive mobile and web-based geospatial information services have become ubiquitous in our daily lives, but their importance is not reflected in current literature on EDSS. The current focus in environmental management on adaptive, stakeholder-centred strategies based on outcomes offers an opportunity to make better use of these new technologies to aid decision-making processes.

In response to the problem of increasing climate change and energy security, investment in renewable energy sources has increased significantly both in Europe and globally. Wind and solar power plants are expected to be the largest contributors to global decarbonization, ranking first and second in projected capacity by 2050. Since all power plants have some impact on the environment, this also applies to photovoltaic power plants. Because of the large capacities projected for PV installed capacity, their environmental impacts should be evaluated. The environmental impacts of PV power plants change over time. Improving the manufacturing technology of PV system components, increasing the efficiency of solar cells, and using materials that are less harmful to the environment will reduce these impacts. Manufacturing PV system components is a highly energy-intensive process that involves greenhouse gas emissions. As new renewable energy capacity is built, the amount of "green" electricity on the grid increases, reducing CO2 emissions per kWh consumed. The objective of this paper is to analyze the current status of the environmental impact of PV power plants under these changing conditions in terms of CO2 emissions, land use, pollutant and noise emissions, and water consumption. The capacity installed to date will reach the end of its lifetime by 2050, which means that the amount of waste associated with it will increase over time. This can have a significant impact on the environment, which is why part of the work is dedicated to this problem. In addition to the available information from the literature, in the part related to land use, the authors also made their own estimates based on data on newly installed PV power plants and PV modules available on the market. The results of the analysis show that there is enough land both in Europe and worldwide to install the planned capacities of rooftop and ground-mounted PV power plants. CO2 emissions are at the same level as for concentrated solar power, with a decreasing trend. Pollutant emissions, noise and water consumption are not a major problem compared to other types of power plants. Overall, it can be concluded that the expansion of PV capacity has a very positive impact on the environment.

This paper proposes a Case-Based Reasoning (CBR) system to contribute to reinforce the sustainable performance of an environmental management system. The CBR system aims to support the decision-making process to select environmental management actions aimed at reducing risky trends of the environmental state of a region. The CBR system takes advantage of a set of situation-solution pairs called cases, which are stored in a memory and then retrieved as candidates to solve new problems. Situations in this work are represented by a set of risky trends of the following key environmental variables: CO2 emissions, Air-Quality, Loss of Vegetation Cover, Water Availability, and Solid Waste, whose combination damage the environmental state quality of a region. Meanwhile, solutions are represented by a set of environmental management actions. Similar situations to a given current situation are retrieved from the memory of cases and then their solutions are combined, through an adaptation mechanism, until the solution of the current problem is obtained. We used risky trends derived from real data related to the environmental states of a Mexican region to test the proposed CBR system. The results obtained provided insights into the potential of CBR systems to support the decision-making process to select environmental management actions aimed at reducing risky trends of current environmental states.

This study explores the pivotal biofilm life cycle, essential for comprehending intricate processes in biofilm formation and dispersal. With profound implications for medicine, environmental science, and industrial applications, the life cycle involves initial attachment, irreversible attachment, maturation, and dispersion. Employing bibliographic analysis, the paper unravels critical aspects, unveiling key keywords, prominent research countries/regions, and significant research organizations. This comprehensive approach provides insights into the current biofilm research landscape, identifying gaps for future exploration. Biofilm's influence extends to medical conditions, environmental ecosystems, and industrial challenges, accentuating the urgency of understanding its life cycle. The study also delves into global research distribution and influential organizations, guiding collaborative efforts. As a forward-looking initiative, it proposes future research opportunities, aiming to steer advancements and address challenges in biofilm science. Ultimately, this analysis contributes to the ongoing progress of biofilm research, fostering interdisciplinary collaboration and inspiring future initiatives.

Promoting green development has become an important way to optimize the ecological and economic structure and promote sustainable development. The Yangtze River Economic Belt is an important economic corridor in China, and it remains to be examined whether the implementation of environmental regulations has enhanced the green total factor productivity (GTFP) of cities. This paper calculates the green total factor productivity of 107 cities within the Yangtze River Economic Belt by using the super-efficient SBM model and the GML index with Chinese city panel data from 2007-2019 and measures the intensity of environmental regulations through textual analysis. The bidirectional fixed-effects model constructed in this paper suggests an inverted U-shaped relationship between environmental regulation and GTFP, which is confirmed by a series of robustness tests. Green technology innovation and advanced industrial structure play a mechanism role in this. In regions with lower levels of green technology and industrial structure, the inverted U-shaped relationship between environmental regulation and green total factor productivity is more significant. In addition, the phenomenon of GTFP rising and then falling because of environmental regulation is more obvious in cities in the middle and upper reaches of the Yangtze River and outside the urban agglomerations. Therefore, when formulating environmental regulation policies, it is necessary to balance the relationship between economic development and environmental protection and harmonize the environment and economic development of the entire Yangtze River Basin.

Building information modeling (BIM) is the digital representation of physical and functional characteristics (such as geometry, spatial relationship, and geographic information) of a facility to support decisions during its life cycle. BIM has been extended beyond 3D geometrical representations in recent years, and now includes time as a fourth dimension and cost as a fifth dimension, as well as such other applications as virtual reality and augmented reality. The Internet of Things (IoT) has been increasingly applied in various products (smart homes, wearables) to enhance work productivity, living comfort, and entertainment. However, research addressing the integration of these two technologies (BIM and IoT) is still very limited, and has focused exclusively on the automatic transmission of sensor information to BIM models. This paper describes an attempt to represent and visualize sensor data in BIM with multiple perspectives in order to support complex decisions requiring interdisciplinary information. The study uses a university campus as an example and includes several scenarios, such as an auditorium with a dispersed audience and energy saving options for rooms with different functions (mechanical/electric equipment, classrooms, and laboratory). This paper also discusses the design of a common platform allowing communication among sensors with different protocols (Arduino, Raspberry Pi), the use of Dynamo to accept sensor data as input and automatically redraw visualized information in BIM, and how visualization may help in making energy-saving management decisions.

This paper explores the intricate world of microbial life, focusing on biofilm as a dynamic consortium of bacteria forming complex networks within a self-produced matrix of extracellular polymeric substances (EPS). Analogous to a bacterial house, these structures provide both shelter and support, playing a pivotal role in the microbial realm with dual effects on human and environmental contexts. Biofilm's significance extends beyond its microcosmic architecture, positively contributing to heavy metal removal, electricity generation through microbial fuel cells, and structural remediation, while also posing threats with detrimental formations implicated in conditions from lung to urinary tract infections. Control of biofilm becomes imperative to unlock its positive attributes and mitigate potential negatives, serving as a cornerstone for environmental remediation, sustainable energy, and infrastructure maintenance. Employing a comprehensive bibliographic approach, this study identifies keywords, countries, and organizations influencing biofilm research, proposing innovative avenues like machine learning for future exploration. The aim is not only to contribute to existing knowledge but to pioneer cutting-edge strategies for biofilm optimization and challenge mitigation, shaping its trajectory towards sustainable applications across diverse fields.

The aim of the present study was to investigate the incidence of breast (females), prostate, testicular and thyroid cancer in the Italian National Priority Contaminated Sites (NPCSs), served by cancer registries, where the presence of endocrine disruptors (EDs), reported to be linked to these tumors, was documented. Evidence of carcinogenicity of EDs present in NPCs was assessed based on evaluation by international scientific institutions/committees. Standardized Incidence Ratios (SIRs) were computed for each NPCS and cancer site with reference to the time window 1996-2005. Excess incidence of one or more cancer site at study was found in twelve out of fourteen NPCSs. Significantly increased SIRs were found for breast cancer in eight NPCSs, for prostate cancer in six, for thyroid cancer (both gender) in four and for testicular cancer in two. Non significantly increased SIRs were found in five NPCSs for testicular cancer and in two for thyroid cancer (males). Even if increased incidence of one or more cancer sites at study were found in several NPCSs, the ecological study design and the multifactorial etiology of the considered tumors do not allow reaching conclusions in terms of causal links with environmental contamination. In light of the observation of some excesses in SIRs, continuing epidemiological surveillance is warranted.

High-rise buildings represent technological, urban and life-style trends of the modern urban landscape, yet there are limited data regarding their embodied carbon and environmental impacts, particularly when compared to low- or mid-rise buildings. Given that the projected growth of the global urban population by 2050 requires cities with higher density and potentially greater number of high-rise buildings, it is crucial to develop a clear understanding of the embodied carbon and environmental impacts of high-rise buildings. This article utilizes the building in-formation modelling (BIM) based life cycle assessment (LCA) in Revit and Tally to examine the embodied carbon and environmental impacts of an actual high-rise building structure case-study in Chicago that uses hybrid concrete steel structure. The results show that the embodied carbon and environmental impacts of the high-rise building structure are dominated by the impacts of the product stage in the building life cycle, and concrete as the main structural material. Specifically, this study reveals that concrete constitutes a substantial 91% share of the total mass of the building structure, with 74% contribution to life cycle global warming potential, 53% to acidification po-tential, 74% to eutrophication potential, 74% to smog formation potential, and 68% to non-renewable energy. On the other hand, steel accounts for 9% of the building structure mass, estimated to constitute 26% of the global warming potential, 47% to acidification potential, 26% to eutrophication potential, 26% to smog formation potential, and 32% to non-renewable energy.

By introducing environmental mediator, for avoiding randomness in selecting indicators and subjectivity in deciding interaction path coefficients to reveal interaction mechanism among forest industry, ecology and environmental capacity, structural Pressure–State–Impact–Response (PSIR) and quantitative Structural Equation Modeling (SEM) are utilized with data on thirty–one provinces of China. We can find that: (i) forest industry has a negative influence on ecology, whereas ecology has a positive influence on industry; (ii) the destructive influence that industry has on ecology is much greater than the positive effect ecology has on industry; and (iii) environmental capacity plays a partial mediating role between industry and ecology. According to these results we can conclude that: (i) forest industry and ecology are not in a symbiotic relationship and have not reached a level of ecological security; (ii) the interaction between industry and ecology is in a period of transition from antagonistic to beneficial; and (iii) industry dominates ecology. However, we prospect the following advice: (i) methods of forest industry should be changed; (ii) new modes of industrial integration and circular economy should be developed; and (iii) the ability of the environment to sustain itself should be enhanced. The level of forest ecological security to discuss the symbiotic mechanism of industry and ecology will propose to be measured in future.

Contemporary architects and the construction industry are trying to cope with increasing requirements concerning energy efficiency and environmental impact. One of the available options is the active utilization of energy gains from the environment, specifically solar energy gains. These gains can be utilized by, for example, solar walls and facades. The solar façade concept has been under development for more than a century. However, it hasn’t achieved widespread use for various reasons. Rather recently the concept was enhanced by the application of transparent insulation materials that have the potential to increase the efficiency of such façades. The presented study evaluates the environmental efficiency of 10 solar façade assemblies in the mild climate of the Czech Republic, Central Europe. The evaluated façade assemblies combine the principles of a solar wall with transparent insulation based on honeycomb and polycarbonate panels. The study applies Life-Cycle Assessment methodology to the calculation of environmental impacts related to the life cycle of the evaluated assemblies. The results indicate that even though there are several limiting factors, façade assemblies with transparent insulation have lower environmental impacts compared to a reference assembly with standard thermal insulation. The highest achieved difference is approx. 84% (in favour of the assembly with transparent insulation) during a modelled 50-year façade assembly service life.

The current research investigated the environmental risk of the polycyclic musk compounds, Galaxolide® (HHCB) and Tonalide® (AHTN), in the marine environments. These substances are lipophilic, bioaccumulated and potentially biomagnified in aquatic organisms. To understand the toxicity of HHCB and AHTN, we performed acute toxicity tests by exposing marine microalgae (Phaeodactylum tricornutum, Tretraselmis chuii and Isochrysis galbana), crustaceans (Artemia franciscana), echinoderms (Paracentrotus lividus), bivalves (Mytilus galloprovincialis), fish (Sparus aurata) and a candidate freshwater microalga (Raphidocelis subcapitata) to environmentally relevant concentrations (0.005 - 5 µg/L) following standardized protocols. The effects of both substances on microalgae growth were incipient and only I. galbana was sensitive to HHCB and AHTN, with IC10 values of 5.22 µg/L and 0.328 µg/L, respectively. Significant (p < 0.01) concentration dependent responses were measured in P. lividus and M. galloprovincialis larvae developments as well as S. aurata mortality tested with HHCB. The effect of HHCB on P. lividus larvae development was the most sensitive endpoint recorded, producing an EC50 value of 4.07 µg/L. Our results show that HHCB represents a high risk to P. lividus larvae development for early life stages in marine environments.

The paper presents modelling of relationships between wind velocity distributions observed in Poland and technical requirements for wind power stations design. The wind velocities distributions for various locations in Poland are determined, and expressed in Weibull distribution parameters. Theoretical computations concerning the dependence of wind power station as function of wind speed and aire physical properties are presented. Conclusions important for design of power stations fitted to atmospheric conditions in Poland are given. Wind power plants have been an important source of electricity generation for many years.Wind power modelling with the use of wind speed is used to improve the accuracy of forecasts and analyses of the power production of wind farms.

Qualtra, an innovative 10 MW geothermal power plant proposal, employs a closed-loop design to mitigate emissions, ensuring no direct release into the atmosphere. A thorough assessment utilizing energy and exergy analysis, Life Cycle Assessment (LCA), Exergo-economic and Exergo Environmental Analysis (EevA) was conducted. The LCA results, utilizing the ReCiPe 2016 midpoint methodology, encompass all the spectrum of environmental indicators provided. The technology implemented makes it possible to totally avoid direct atmospheric emissions from the Qualtra plant, so the environmental impact is mainly due to indirect emissions over the life cycle. The results obtained for the Global Warming Potential indicator is about 6.6 g CO2/kWh, notably lower compared to other conventional systems. Contribution analysis reveals that the construction phase dominates, accounting for over 90% of the impact in all LCA MidPoint categories. At the component level, a single score calculation incorporating normalization and weighting was executed. The resulting single score is then used into Exergo-Environmental Analysis (EEvA), highlighting the well system as the most impactful contributor, constituting approximately 45% of the total impact. Other substantial contributions to the environmental impact include the condenser (21%), the turbine (17%), and the HEGeo (14%). The Exergo-Economic analysis assesses cost distribution across major plant components, projecting an electricity cost of about 8.3 c€/kWh.

The pollution of the bays in Abidjan is a major concern for the Ivorian policy makers. In fact, the pollution of the bays induce high costs to the society while impacting population health dramatically. As a result, pollution reduction management of production activities has been undertaken in the Cocody Bay area. To our knowledge, no study has yet proposed a model to evaluate the cost-effectiveness of these pollution management strategies. A cost-effectiveness model, based on Monte Carlo simulation, was developed to assess the economic and environmental impacts of various scenarios characterized by a set of production practices, both in the short term and in the long term. The authors discuss the steps and input parameters of the model presented. The proposed model may serve as the basis for identifying an optimal production scenario defined as the scenario with the best incremental cost-effectiveness ratio considering a willingness to pay (WTP) threshold. The WTP, to be estimated based on the gross domestic product of Côte d’Ivoire, represents the opportunity costs associated with selecting the optimal scenario. The current framework can also be applied to other settings facing similar challenge.

Nowadays, consumers have growing expectations for healthier and higher-quality food, and sustainable food choices are also taking on an increasingly central role. This paper assesses the environmental loads and energy resources of vegan, semi-vegetarian, and traditional restaurant soups and main dishes, focusing on preparation and cooking phases based on the life cycle assessment. The optimal menu samples were selected based on statistical methods. Mann-Whitney and Krus-kal-Wallis tests were applied to investigate restaurant products' distribution and carbon footprint. Based on the results, the preparation phases have a more significant impact. The environmental loads for the life cycle of vegan and semi-vegetarian menus are lower. Furthermore, a sustainability assessment model was developed by integrating lean and life cycle assessment approaches called "GreenCycLEAN." Research results are helpful for the sustainability of catering establishments.

In August 4 2011, United Nations Environmental Program (UNEP) submitted an unprecedented, scientific, groundbreaking Environmental Assessment Report (EAR) of Ogoniland, to the Nigerian government. This was the outcome of a 14–month intensive evaluation of the extent of pollution. It was intended that UNEP’s recommendations would be implemented to restore the devastated environment, on the one hand, and on the other, counteract the numerous environmental health issues that have for decades, plagued Ogoniland. However, five years post EAR, and, despite the seriousness of the situation, no significant resolution has occurred, both on the part of the government, and on the part of Shell Petroleum Development Company (SPDC) or Shell. To date, millions of Niger Delta residents, particularly those living in the oil-bearing communities, continue to suffer severe consequences. Although, the assessment was conducted in Ogoniland, other communities in the Niger Delta are also affected. This article explores prevailing issues, using Ogoniland (a microcosm of the Niger Delta) as an example. A multidisciplinary approach for sustainable mitigation of environmental health risks in the Niger Delta is paramount, and Environmental Management tools offer valuable strategies. Adopting UNEP’s recommendations for addressing environmental health problems requires implementing the Environmental Management/Environmental Management System (EM/EMS) model.

The number of engineers who are transitioning into environmental sustainability careers is growing, though a gap still exists between supply and demand. This presents an opportunity for undergraduate engineering students to fulfill the demand as environmental sustainability professionals. This qualitative exploratory study investigated environmental sustainability learning experiences and future career interests in environmental sustainability. The social cognitive theory (SCCT) was utilized as a theoretical lens, exploring undergraduate students’ environmental sustainability interests, related learning experiences and their interest in pursuing a future career in environmental sustainability. Twenty-five undergraduate engineering students in various engineering disciplines were interviewed for this study. Data were analyzed to (1) identify students’ interest in pursuing a career in environmental sustainability, (2) determine if students’ interests have changed since they began their undergraduate studies, and (3) explore how learning experiences have impacted students’ future career choice. The findings posit that exposure to environmental sustainability learning experiences is impactful and plays an important role, impacting students' interests in pursuing careers in sustainability. Results reveal that elements such as personal beliefs and salary considerations inspire career choices. This research contributes to addressing the demand for additional working professionals who are prepared to tackle environmental sustainability issues, highlighting the role of learning experiences in shaping students' career interests.

Food fraud (often called fake food in South Africa), the deliberate misrepresentation or adulteration of food products for financial gain, is a growing problem in South Africa (SA) with severe public health and financial consequences for consumers and businesses. The recent public outcry against food fraud practices, especially in communities that have lost loved ones due to the consumption of allegedly unsafe foodstuffs, highlights the grave danger that food fraud poses to consumers and the potential for significant reputational damage to food manufacturers. Despite the risks, food fraud often goes undetected, as perpetrators are becoming increasingly sophisticated. The precise magnitude of food fraud remains obscure, as incidents that do not cause consumer illnesses are frequently unreported and, as a result, are not investigated. Food fraud costs the global economy billion annually. This cost is borne by consumers, businesses, and the government. Food fraud can occur at any stage of the food supply chain, from production to processing to retailing or distribution. This is due in part to the limitations of current analytical methods, which are not always able to detect food fraud. This systematic literature review of food fraud in SA looks at several factors that may be contributing to epidemic of food fraud (fake food), including lenient penalties, inadequate government commitment, a complex labelling regulations, emerging threats such as e-commerce, and a shortage of inspectors and laboratories. The review recommends establishing a single food control/safety authority, developing more food safety laboratories, and adopting innovative technologies to detect and prevent food fraud. SA faces a serious food fraud crisis unless decisive action is taken.

We tested the use of mosquito traps as an alternative to insecticide spraying in Camargue (France) following the significant impacts observed on the non-target fauna through Bti persistence and trophic perturbations. In a village of 600 inhabitants, 16 Techno-Bam traps emitting CO₂ and using octenol lures were set from April to November 2016. Trap performance was estimated at 70% overall based on mosquito landing on human baits in areas with and without traps. Reduction of Ochlerotatus caspius and Oc. detritus, the two species targeted by Bti spraying, was respectively 74 and 98%. Traps were less efficient against Anopheles hyrcanus (46%), which was more attracted by lactic-acid than octenol lures based on previous tests. Nearly 300 000 mosquitoes from nine species were captured, with large variations among traps, emphasizing that trap performance is also influenced by surrounding factors. Environmental impact, based on the proportion of non-target insects captured, was mostly limited to small chironomids attracted by street lights. Breeding success of a house martin colony was not significantly affected by trap use, in contrast to Bti spraying. Our experiment confirms that deployment of mosquito traps can offer a cost-effective alternative to Bti spraying for protecting local populations from mosquito nuisance in sensitive natural areas.

Safe water is a global public health concern amid increasing scarcity and pollution. Bottled water production and consumption contribute to these problems. This study examines tap water consumption in Italy, assessing associated sociodemographic factors and related health outcomes such as obesity and self-perceived health status. Data from the Italian National Statistics Institute's "Aspects of daily life" survey (N=45,597) were analyzed. Covariates included education, age, gender, economic status, region, concerns about waste and climate change, consumption of carbonated drinks excluding water, alcohol consumption, consumption of vegetables, consumption of snacks, body mass index, and self-perceived health status. Bivariate analyses and mixed-effect logistic regression models explored the associations. People who drink tap water were 19,674 with a higher prevalence in people aged 45 to 59 old, people with a graduate/post-graduate degree diploma, with optimal economic resources, and concerned about waste production and climate change, coming from the North-East regions of Italy. Underweight people showed a higher prevalence of TW assumption as well as those who drink less than occasionally carbonated drinks, drink alcohol, consume vegetables more than once a day, and snacks less than once a week with a satisfying level perceived health status. Regressions showed that all age classes are less likely to drink tap water than people younger than 20 years old. The category with “inadequate” economic resources is more likely to consume tap water. Low educational classes show a low likelihood of consuming tap water as well as Islands. A concern about waste production and climate change is associated with an increased likelihood of assuming tap water. Tap water consumption was negatively associate with obesity but not with a satisfactory Self-perceived health status. Insights from this study can inform public health strategies.

In the last decades there has been a progressive aging of the population, known as “demographic revolution” or “demographic transition”. As a consequence of the worldwide progressive aging of population and of the increasing of general life expectancy, the relationship between aging and disability became a very important one and received a huge interest in research for its consequences on participation, inclusion and quality of life of ageing people and for its consequences on socio-sanitary organizations. The aim of this paper is to analyze this relationship and to discuss consequences on participation, inclusion and quality of life of ageing people, according to recent conceptual models of disability and active ageing. According to previous papers this relationship could be considered in two ways: ageing with disability (which refers to people living with long-term effects of disabling conditions acquired from birth to middle age) and disability with ageing (which refers to people which disabling conditions acquired later or age-related conditions), but newer papers proposed a convergence of these two approaches, taking into account the similarities and the differences between the two ways.

Retiring coal power plants can reduce air pollution and health damages. However, the spatial distribution of those impacts remains unclear due to complex power system adjustments and pollution chemistry and transport. Focusing on coal retirements in Pennsylvania (PA), we analyze six counterfactual scenarios for 2019 that differ in retirement targets (e.g., reducing 50% of coal-based installed capacity vs. generation) and priorities (e.g., closing plants with higher cost, closer to Environmental Justice Areas, or with higher CO₂ emissions). Using a power system model of the PJM Interconnection, we find that coal retirements in PA shift power generation across PA and the Rest of PJM region leading to scenario-varying changes in the plant-level release of several air pollutants. Due to air pollution chemistry and transport and socio-demographics, these changes in turn give rise to a reduction of 10 to 182 PM_2.5-attributable deaths in PJM across the six scenarios, with most reductions occurring in PA. Scenarios that reduce more coal power generation yield greater aggregate health benefits due to air quality improvements in PA and adjacent downwind regions. In addition, vulnerable populations—in both PA and Rest of PJM—benefit most in scenarios that prioritize plant closures in PA near Environmental Justice Areas. These results demonstrate the importance of considering cross-regional linkages and socio-demographics in designing equitable retirement strategies.

The global usage of veterinary antibiotics is significant. These antibiotics can be released into the aquatic environment and exert toxic effects on non-target organisms. To explore the physiological effects of tetracycline antibiotics on aquatic life, the growth characteristics of and toxin release from the cyanobacterium Microcystis aeruginosa (M. aeruginosa) were studied. Results showed that the toxicity order of the three target antibiotics was TC (tetracycline) > CTC (chlortetracycline hydrochloride) > OTC (oxytetracycline) in terms of inhibition occurrence time and the EC₁₀ and EC₂₅ values. Further, the target antibiotics regulated the production of MC-LR (microcystin-LR) to different degrees. CTC destroyed the M. aeruginosa cells and resulted in a decreased MC-LR release but stimulated the ability to synthesise MC-LR. OTC had a relatively weaker toxicity compared with CTC, while TC was the most toxic among the three antibiotics. Therefore, TC is friendly to the aquatic environment because it simultaneously reduced the intracellular and extracellular MC-LR content. These results aid our understanding of the effects of tetracycline antibiotics on Microcystis aeruginosa, which is important for environmental evaluation and protection. These results are also helpful for guiding the application of veterinary antibiotics in agricultural settings.

Smart manufacturing encompasses a category of manufacturing that employs computer-integrated capabilities and technologies to enhance supply chain optimization, production efficiency, and recyclability. Yet limited studies have been conducted to optimize these prospects from the perspective of low resource countries where such innovative studies have not been adequately explored. This paper aims to examine the implications of smart manufacturing practices (Smart Procurement, Smart Supply Chain, Smart Production Planning and Control, Automation and Industrial Robot, and Supply Chain Configuration) on pro-environmental behaviour and develop a baseline moderated mediation model to explain the relationship between smart manufacturing and pro-environmental behaviour with a role of green dynamic capability, and environmental orientation. This study is anchored on quantitative research approach, deductive reasoning, and explanatory design. Cross – sectional survey data have been obtained from 382 manufacturing companies in Ghana. Our hypotheses have been tested using Structural Equation Modelling and SMART-PLS version 3.8.9. The study has revealed that smart manufacturing practices significantly and positively relate to pro-environmental behaviour. Moreover, green dynamic capability and environmental orientation moderate the relationship between smart manufacturing and pro-environmental behaviour. The implications of the study include the emergence of a baseline model to guide policymakers, practitioners, and academicians to explain the relationship between smart manufacturing and sustainable manufacturing in the context of developing countries. Again, the social implication of the study includes the realisation of decent job and economic growth, responsible consumption and production as well as actions taken to combat climate change.

Although agricultural crops production systems in subtropical plateau regions currently pose high environmental risks, especially in developing countries, their environmental impacts and emission-reduction potentials remain unclear, and the development potential of such systems is likely huge. We conducted a case study in Yunnan Province, China, to quantify the environmental impacts from crop production during 2002–2021. The life cycle assessment method was employed to identify factors driving the environmental impacts, and potential mitigation strategies were proposed. The yield and total nutrient input of grain crops in Yunnan Province increased over the 20-year period, and environmental footprint of crops production in Yunnan Province was higher than that of other regions. Average annual mean greenhouse gas (GHG) emissions and soil acidification potentials (AP) and water eutrophication potentials (EP) of crops production during 2002–2021 were 732 kg CO2-eq·Mg-1, 15.8 kg SO2-eq·Mg-1, and 2.7 kg PO4-eq Mg-1, respectively. GHG emissions from g crops mainly originated from applying agricultural materials during the crop life cycle. There was a significant correlation between surplus nitrogen and environmental impacts. Scenario testing showed that through crop sowing, nutrient regulation, and crop management, the crop yield could be increased and environmental costs could be reduced. The greatest reductions were found in wheat production: 53.1%, 67.9%, and 67.7% for GHG emissions, AP, and EP, respectively. Adopting comprehensive agricultural management measures could reduce the negative impact of crops production on the environment in subtropical plateau areas and achieve sustainable agricultural development.

Background: In Switzerland, Aedes albopictus is well established in Ticino, south of the Alps, where surveillance and control are implemented. The mosquito has also been observed in Swiss cities north of the Alps. Decision-making tools are urgently needed by the local authorities in order to optimize surveillance and control. Methods: A regularized logistic regression was used to link the long-term dataset of Ae. albopictus occurrence in Ticino with socio-environmental predictors. The probability of establishment of Ae. albopictus was extrapolated to Switzerland and more finely to the cities of Basel and Zurich. Results: The model performed well, with an AUC of 0.86. Ten so-cio-environmental predictors were selected as informative, including the road-based distance in minutes of travel by car from the nearest cell established in the previous year. The risk maps showed high suitability for Ae. albopictus establishment in the Central Plateau, the area of Basel and the lower Rhone Valley in the Canton of Valais. Conclusions: The areas identified as suitable for Ae. albopictus establishment are consistent with the actual current findings of tiger mosquito. Our approach provides a useful tool to prompt authorities’ intervention in the areas where there is higher risk of introduction and establishment of Ae. albopictus.

Traffic congestion is a persistent and challenging problem in urban areas, leading to increased travel times, fuel consumption, and environmental pollution. Signalized intersections play a pivotal role in regulating traffic flow, and their efficiency has a direct impact on the overall traffic performance of a city. This study investigates the effect of traffic signal in managing traffic volume and reducing congestion and delays at signalized intersections through a comprehensive analysis of existing research, data collection, and simulations.The research begins by analyzing the traffic characteristics by an installed LiDAR sensor at E Cold Spring Ln – Hillen Rd intersection in Baltimore City, MD. When the signal at this intersection stopped working for some hours during a working day in September 2023, the LiDAR recorded vehicle and pedestrian counts, vehicle-vehicle and vehicle-pedestrian conflicts, and jaywalking events conflicts. The research aims to assess the impact of traffic signal failures on traffic flow, congestion, safety (V2V and V2P conflicts), and the frequency of jaywalking events before, during, and after improper performance of the traffic signal. Furthermore, this study explores the factors influencing traffic signal performance, including traffic demand, geometric layout, pedestrian interactions, and the integration of emerging technologies. The analysis results highlighted the importance of signal control systems existence at this intersection that can adjust signal timing in response to changing the real-time traffic conditions.Reduced congestion, minimized delays, and enhanced traffic flow are observed outcomes, contributing to a more sustainable and efficient urban transportation system. However, it is crucial to consider the trade-offs and challenges associated with traffic signal optimization, such as the potential for increased travel times for certain modes of transportation and the need for ongoing maintenance and updates. In conclusion, this study underscores the pivotal role of traffic signals in managing traffic volume and reducing congestion and delays at signalized intersections. Through evidence-based analysis and innovative signal control strategies, urban planners and transportation authorities can work towards creating more efficient, sustainable, and less congested transportation networks. The insights derived from this research can inform policy decisions and guide the development of future traffic management solutions, ultimately leading to improved quality of life in urban areas.

This study introduces a neural network-based approach to predict dust emission, specifically PM2.5 particles, during almond harvesting in California. Using a feedforward neural network (FNN), the research predicts PM2.5 emissions by analyzing key operational parameters of an advanced almond harvester. The model is trained on extensive field data from the almond pickup system, including variables like brush speed, angular velocity, and harvester forward speed. The results demonstrate a notable predictive accuracy of the FNN model, with a Mean Squared Error (MSE) of 0.02 and a Mean Absolute Error (MAE) of 0.01, indicating a high degree of precision in forecasting PM2.5 levels. The study also finds a strong correlation between certain operational parameters and PM2.5 emissions, highlighting specific areas for optimization in harvesting techniques. By integrating machine learning with agricultural practices, this research provides a significant tool for environmental management in almond production, offering a method to reduce harmful emissions while maintaining operational efficiency. This model presents a solution for the almond industry and sets a precedent for applying predictive analytics in sustainable agriculture.

Air pollutants such as volatile organic compounds (VOCs), nitrogen oxides (NOx), sulfur dioxide (SO2), as well as water pollutants including heavy metal, are harmful to human and environment. Effective control and reduction of their pollution is therefore an important topic for today’s scientists. Fly ash (FA) is a type of industrial waste that can cause multiple environmental problems if discharged into the air. On the other hand, because of its high porosity, large specific surface area, and other unique characteristics, the FA can also be used as a low-cost and high efficient adsorbent with some simple modifications. This paper reviews the effects of FA on treatment of the above air and water pollution based on our research experience over many years, including to the current status of global FA utilization, physicochemical properties, principle of adsorption, and the application direction of FA in the future. It focuses on the use of nanocomposite technology to fabricate functional FA fibrous membranes to adsorb VOCs from air, and treat heavy metal wastewater. This present review first describes the fabrication technology of FA nanocomposites and their mechanism of adsorption VOCs from air. Utilization of nanofiber technology to fabricate multi-functional FA emerging composite materials to mitigate air and water pollution has great potential in the future, especially use of pollutant material to control other pollutants.

Environmental monitoring plays a central role in diagnosing climate and management impacts on natural and agricultural systems, enhancing the understanding hydrological processes, optimizing the allocation and distribution of water resources, and assessing, forecasting and even preventing natural disasters. Nowadays, most monitoring and data collection systems are based upon a combination of ground-based measurements, manned airborne sensors or satellite observations. These data are utilized in describing both small and large scale processes, but have spatiotemporal constraints inherent to each respective collection system. Bridging the unique spatial and temporal divides that limit current monitoring platforms is key to improving our understanding of environmental systems. In this context, Unmanned Aerial Systems (UAS) have considerable potential to radically evolve environmental monitoring. UAS-mounted sensors offer an extraordinary opportunity to bridge the existing gap between field observations and traditional air- and space-borne remote sensing, by providing not just high spatial detail over relatively large areas in a cost-effective way, but as importantly providing an entirely new capacity for enhanced temporal retrieval. As well as showcasing recent advances in the field, there is also a need to identify and understand the potential limitations of UAS technology. For these platforms to reach their monitoring potential, a wide spectrum of unresolved issues and applications specific challenges require focused community attention. Indeed, to leverage the full potential of UAS-based approaches, sensing technologies, measurement protocols, post-processing techniques, retrieval algorithms and evaluations techniques need to be harmonized. The aim of this paper is to provide a comprehensive general overview of the existing research on studies and applications of UAS in environmental monitoring in order to suggest users and researchers on future research directions, applications, developments and challenges.

Blood and/or urine levels of 27 heavy metals were determined by ICPMS in 41 patients with dilated cardiomyopathy (DCM) and 29 presumably healthy subjects from the Katanga Copperbelt (KC), in the Democratic Republic of Congo (DRC). After adjusting for age, gender, education level, and renal function, DCM probability was almost maximal for blood concentrations above 0.75 and 150 µg/dl for arsenic and copper, respectively. Urinary concentrations above 1 for chromium, 20 for copper, 600 for zinc, 30 for selenium, 2 for cadmium, 0.2 for antimony, 0.5 for thallium and 0.05 for uranium, all in μg/g of creatinine, were also associated with increased DCM probability. Concurrent and multiple exposures to heavy metals, well beyond permissible levels, are associated with increased probability for DCM. Study findings warrant screening for metal toxicity in case of DCM and prompt public health measures to reduce exposures in the KC, DRC.

Given the opportunities offered by foreign investment in energy infrastructure mostly by Chinese firms, the Government of Cambodia is giving high priority to developing hydropower resources for reducing energy poverty and powering economic growth. Using a “Political ecology of the Asian drivers” framework, this paper assesses China’s involvement in the development of large dams’ in Cambodia and its impacts on the access of natural resources such as water and energy by dam builders, local communities and the government. This analysis is based on 61 interviews and 10 focus group discussions with affected communities, institutional actors, Chinese dam builders and financiers in relation to the first large Chinese dam built in Cambodia, the Kamchay dam. Based on the results of the analysis this paper makes recommendations on how to improve the planning, implementation and governance of large dams to ensure that the dams’ benefits are shared more equally.

A crop-weed simulation model is presented to compare and evaluate Integrated Weed Management (IWM) strategies. Specifically, the model was parameterized for soybean crops in competition with Euphorbia davidii Subils. We used both, weed and crop demographic data surveyed in agronomic fields of the central zone of the Buenos Aires province, Argentina, throughout two crop cycles (2011/2012 and 2013/2014). The proposed model underwent a calibration process and subsequent validation with 70/30 % data split respectively (N=37). Two annual-based and one multiannual-based case studies were simulated to demonstrate the performance of the model. Different IWM strategies were compared under both, operational and tactical planning horizons through the evaluation of different model outcomes (i.e. crop yield, interspecific competition, economic return, and environmental impact). Our case studies results suggest that the inclusion of cultural management practices could reduce weed interspecific competition by 46 to 97 % and weed seed production by 40 to 89%. An increment in both expected crop yield, by 6 to 20%, and annual gross margin, by 44 to 199 US$.ha-1, were obtained in silico for similar levels of environmental impact.

Households and businesses are generating unprecedented levels of electrical and electronic wastes (e-waste), fueled by modernisation and rapid obsolescence. While the challenges imposed by e-waste are similar everywhere in the world, disparities in progress to deal with it exists; with developing nations such as South Africa lagging. The increase in e-waste generation increases the need to formulate strategies to manage it. This paper presents an overview of e-waste management on a global and South African scenarios with a specific case for Cathode Ray Tube (CRT) waste management practices in South Africa. CRTs present the biggest problem for recyclers and policy makers because they contain hazardous elements such as lead and antimony. Common disposal practices have been either landfilling or incineration. The research into the South African practices with regards to CRT waste management showed that there is still more to be done to effectively manage this waste stream. This is despite clear waste regulatory frameworks in the country. However, recent developments have placed e-waste as a priority waste stream, which should lead to intensified efforts in dealing with it. Overall, these efforts should aim to maximise diversion from landfilling and to create value-addition opportunities, leading to social and environmental benefits.

The production of photovoltaic modules is increasing to reduce greenhouse gas emissions. However, this results in a significant amount of waste at the end of their lifespan. Therefore, recycling these solar panels is important for environmental and economic reasons. However, collecting and separating Crystalline silicon, Cadmium Telluride, and Copper indium gallium selenide panels can be challenging, especially in underdeveloped countries. The innovation of this work is to develop a process to recycle all solar panel waste. The dissolution of all metals is studied through the leaching process as the main step of the flowchart. In the first step of leaching, silver can be recovered 98% by 0.5 nitric acid. Then, the second and third step involves the use of glycine for base metals dissolution, followed by the leaching of valuable metals with hydrochloric acid. The effect of parameters such as initial pH, acid concentration, solid/liquid ratio, and Hydrogen peroxide concentration are studied. The results show that Cu, Pb, Sn, Zn, Cd, In, Ga, and Se can be recovered until about 100% under optimal conditions. The optimal conditions for the dissolution of Cu, Zn, and Cd were the glycine concentration of 0.5 M, Temperature of 25 ˚C, the solid/liquid ratio of 10 gr/l, and 1% of Hydrogen peroxide. The optimized glycine concentration for the leaching of lead and tin was 1.5M. Indium and gallium were recovered to 100% by the use of 5M Hydrochloric acid, S/L=10gr/l, and T=45 ˚C. Separation of selenium and tellurium occurred by 0.5 M HCl at a temperature of 60 ˚C. Additionally, for the first time, a general outlook for the recycling of various end-of-life solar panels is suggested.

The transport sector in Germany causes one-quarter of energy-related greenhouse gas emissions. One potential solution to reduce these emissions is the use of battery electric vehicles. Although a number of life cycle assessments have been conducted for these vehicles, the influence of a transport system wide transition has not been researched sufficiently. Therefore, we developed a method which combines life cycle assessment with an agent-based transport simulation and synthetic electric, diesel and gasoline powered vehicle models. We use the transport simulation to obtain the number of vehicles, their lifetime mileage and road-specific consumption. Subsequently we analyze the product systems’ vehicle production, use phase and End-of-Life. The results are scaled depending on the covered distance, the vehicle weight and the consumption for the whole life cycle. The results indicate that the sole transition of drive trains is insufficient to significantly lower the greenhouse gas emissions. However, sensitivity analyses demonstrate that there is a considerable potential to reduce greenhouse gas emissions with higher shares of renewable energies, a different vehicle distribution and a higher lifetime mileage. The method facilitates the assessment of the ecological impacts of the complete car based transportation in urban agglomerations and is able to analyze different transport sectors.

Recently, both global and domestic environmental events have been occurring more frequently, bringing catastrophic consequences to humans and the environment. These adverse events have caused widespread concern among the general public. In positive terms, these devastating events could potentially enhance people’s environmental awareness, which, in turn, could instill a greater sense of environmental responsibility. This study aims to investigate how university students concern themselves with global and domestic catastrophic environmental events and to examine how global and domestic environmental concerns mediate the effect of environmental knowledge and attitudes on university students’ environmental responsibility. Students of King Mongkut’s University of Technology Thonburi in Bangkok, Thailand were selected as the participants. A simple random technique was applied to select the research participants. Questionnaire surveys with 863 students were carried out during September–October 2019. A path analysis was performed to test how global and local environmental concerns mediate the effect of environmental knowledge and attitudes on university students’ environmental responsibility. The results demonstrated that domestic environmental concerns, taken alone, contributed less to the students’ sense of environmental responsibility. Domestic environmental concerns had a stronger effect on environmental responsibility when taken together with global environmental concerns. In addition, both domestic and global environmental concerns could help transform environmental knowledge and attitudes into environmental responsibility. Only environmental attitudes had no direct effect on responsibility. These results show that domestic and global catastrophic environmental events could raise students’ levels of concern for the environment, and, ultimately, enhance their sense of responsibility to protect the environment.

In the former mining district of La Carolina (southern Spain), waste materials were accumulated without first waterproofing the substrate. Additionally, these mining dams were abandoned without any type of restoration, conditions that present a significant risk of contaminating the surrounding soils and waters. Prior to carry out the necessary works for isolating these residues, morphological characterization of the contact with the base substrate is needed. For that purpose, in recent years, different indirect study techniques have been used, among which electrical to-mography stands out. In this work, a less common geophysical technique, magnetometry, both in its magnetic and gra-diometric modalities, is used as an alternative method to analyse the geometry and structure of a mining dam. The results obtained with this methodology are compared with the results provided by electrical techniques, as well as with direct data from mechanical surveys and aerial photo-graphs prior to waste deposition. The magnetic anomaly curves obtained with geometric models generated with the Mag2dc program were also analysed. This comparative study shows the use-fulness of magnetic prospecting in characterizing the base geometry of these mining structures and therefore the interest in its application to environmental characterization studies.

This study addresses the latent construct of attitudes towards environmental conservation based on study participant’s responses. We measured and evaluated the latent scale based on an 18-item scale instrument, over four experimental strata (N=945) in the US Virgin Islands and the Caribbean. We estimated the latent scale reliability and validity. We further fitted multiple alternative two-parameter logistic (2PL) and graded response models (GRM) from Item-Response Theory. We finally constructed and fitted equivalent structural and generalized structural equation models (SEM/GSEM) for the attitudinal latent scale. All scale measures (composite, alpha-based, IRT-based and SEM-based) were consistently and reliably valid measures of the study participants’ latent attitudes toward conservation. We found statistically significant differences among participant’s attributes relating to socio-demographic, physical and core environmental characteristics of participants. We assert that the nature of relationship between cognitive attitudes and individual as well as social behavior related to environmental conservation.

The demand for industries to enhance sustainability is rising in response to climate change worries. A pervasive and intensifying worldwide environmental problem, plastic pollution has a particularly severe impact on climate change. The production of significant volumes of plastic garbage occurs mostly in Asian regions. So, it's commonplace to talk about pro-environmental conduct nowadays. Indonesia and Taiwan are chosen as case studies of developed and developing regions, respectively. The cultural differences between the two areas do, however, exist in terms of environmental values, and this further influences consumer behavior. In order to understand how environmental education has influenced pro-environmental behavior, this study examines how environmental attitude, knowledge, motivation, and intention have changed as a result of environmental education. By sending electronic questionnaires to a sample of 235 respondents (110 Indonesian and 125 Taiwanese), gathered between March 11 and April 30, 2023, we employ quantitative approaches and data-gathering procedures. The CB-Structural Equation Modelling with AMOS analytical tool is used to examine the data. We are able to draw important conclusions from the study of differences between Indonesian and Taiwanese and make suggestions for more research as well as theoretical and managerial ramifications.

The social- and self-directed behaviours of two golden lion tamarins (Leontopithecus rosalia) was investigated while having residence in the tropical house of Aalborg Zoo, Denmark. The behaviour of the female had been distinct from the male since 2018. Despite several diagnostic examinations and medicinal treatments, the cause of the aberrant and apparently stereotypical behavioural patterns remained undetermined, which initiated this study. The pair were recorded throughout a predetermined observation period and these recordings were analysed to illuminate the behaviours of the individuals. The results showed that there were differences in the type, frequency, and durations of both social- and self-directed behaviours between the sick female and the healthy male. The female expressed both social- and self-directed behaviours more frequently and for longer durations, while the male were more socially reserved and did not engage in social behaviours as frequently. Furthermore, subsequent necropsy of the female revealed uro-genital disease.

The assessment of an organization/product's environmental footprint is based on the protocols developed by the Joint Research Centre of the European Union, which take into account 16 impact categories. Among the categories covered are toxicity to freshwater ecosystems and to humans. Standard protocols use only chemical parameters as input data, preventing the true impact of entire complex mixtures, such as emissions discharged into the environment, from being determined. Biological assays allow us to bridge this gap: in the current study, assays were used to determine baseline toxicity towards aquatic organisms (green algae, luminescent bacteria, and crustaceans) as well as specific toxicity (mutagenicity and carcinogenicity). Expected impacts were compared using two approaches (standard and bioassay-centered results obtained are not always in line and, in general, the traditional method underestimates impacts). This demonstrates the importance of these assays and suggests that they be used in LCA (Life Cycle Assessment) protocols as well.

The oil and gas industry in Nigeria, a vital contributor to the nation's economy, has long been associated with significant environmental challenges. Pollution, habitat destruction, and greenhouse gas emissions have raised global concerns about sustainability and corporate responsibility. This empirical study explores the relationship between environmental accounting practices and the financial performance of listed oil and gas companies in Nigeria. We investigated eight oil and gas companies that are publicly traded on the Nigerian Stock Exchange Market (NGX) as of January 17, 2022, from 2011 to 2022. The study employs Driscoll-Kraay standard errors and reveals that environmental accounting had significant effects on returns on assets, earnings per share, and liquidity ratio. The study revealed that the implementation of environmental accounting practices had diverse effects on the performance of oil and gas companies in Nigeria. The findings encourage policymakers and stakeholders in the sector to utilise the insights and design more effective regulations and incentives that promote environmental corporate responsibility. Also, valuable insights into the potential benefits and challenges associated with adopting environmental accounting practices, and influencing the decision-making processes of corporate stakeholders were provided to ensure sustainability in terms of improved financial performance of the oil and gas sector in Nigeria.

Considering the ever-increasing role of rare-earth elements (REE) in the modern hi-tech field, their effective use has a tremendous significance, although the production process is inevitably linked to the large volumes of industrial ammonia effluents and heavy metal wastes. In the process of metallurgical separation of metals, the emission of large volumes of noxious gases and radioactive substances is inevitable. Lean technogenic raw material processing is sensible under the condition of the development of non-waste technology. The lack of competent regulations governing the disposal of waste containing REE has an impact on adjacent territories, accumulating in water bodies and, as a result, in the human body. Such an impact cannot pass without a trace, however, the ambiguity of opinions in the scientific community regarding the toxic effects of REE on living organisms determines the relevance of a more detailed study of this issue. The paper presents experimental and theoretical results of studies of ion flotation in the aqueous solutions containing ytterbium cations and a surfactant as a collector - sodium dodecyl sulphate (NaDS).

Abstract: Field studies with large-stemmed plants Artemisia dubia (wormwood) have been carried out at Vėžaičiai Branch LAMMC since 2018. According to three years of experimental results, annual dry matter (DM) yield varied from 7.94 to 10.14 t ha-1. Growing conditions, nitrogen ap-plication level and harvesting time had significant impacts on Artemisia dubia productivity. This article presents the results of research on preparation and use of Artemisia dubia biomass for en-ergy conversion and evaluation of technological-technical and environmental parameters of these plants utilization for solid biofuel. For experiments were used 6 variants of Artemisia dubia samples, which were grown in 2021: plants were cut three times and two fertilization options were used: (1) no fertilization and (2) fertilization with 180 kg ha-1 of nitrogen fertilizer. These harvested plants were chopped, milled and were pressed into the pellets. The physi-cal-mechanical characteristics (mоisture content, density and strength) of Artemisia dubia pellets were investigated. During this study, it was found that the density in dry mass (DM) of pellets ranged from 1119.86 to 1192.44 kg m-3. The pellet moisture content ranged from 8.80 to 10.49%. After testing of pellet strength, it was found that the pellets which were made from plant bio-mass PK-1-1, were the most resistant to compression, they withstood 560.36 N of pressure. Dry fuel lower heating value (LHV) of pellets was sufficiently high and was very close to pine saw-dust pellets, it varied from 17.46±0.25 MJ kg-1 to 18.14±0.28 MJ kg-1. The ash content of burned pellets ranged from 3.62±0.02% to 6.47±0.09%. Emissions of harmful pollutants – CO2, CO, NOx and unburnt hydrocarbons (CxHy) did not exceed the maximum permissible levels. Summariz-ing the results of investigated properties, cоmbustion and emissiоns of Artemisia dubia pellets, it can be concluded that this biofuel can be used for production of pressed biofuel and it is charac-terized by sufficient high quality, efficient combustion and permissible emissions to the envi-ronment.

The transition to sustainability requires major behavioural changes. This requires a complete rethinking of ecosystems and their interconnections, reassessing environmental issues, and a behavior change manifesting. Thus, understanding how sustainability Knowledge, Attitudes, and Practices (KAP) change is essential to sustainability as they shape human behaviour. The main aim of this study was to investigate the constructs of sustainability KAP among university and non-university populations. Data were collected using a structured questionnaire of items measured on a five-point Likert scale ranging from 1 (strongly disagree) to 5 (strongly agree). The questionnaire was distributed to diverse participants, ensuring a broad representation of views on sustainability. There are ten sociodemographic variables, 344 respondents in UAE where the female (28.5%) and male (13.7%), (58.1%) participants did not belong to the UAE university and their age fall into the 18-24 years old. The mean scores indicate a positive orientation towards sustainability, with Knowledge (M = 4.2272), Attitudes (M = 4.2650), and Practices (M = 3.8198) all above the midpoint and the UAE university students showed more knowledge, attitude and practices scores ‎than others population. Associations between KAP were significant at a significant level of p &lt; 0.05. This indicates that the next generation will have more environmentally KAP.

The article focuses on mining of non-energy mineral resources with minimum environmental impacts. It issues from research results of a project Competence Centre for Effective and Ecological Mining of Mineral Resources implemented at the Faculty of Mining and Geology at VŠB-Technical University of Ostrava, Czech Geological Survey, a company Watrad ltd., a state enterprise Diamo, a company RPS Ostrava plc and a company Sedlecký kaolin plc. The paper starts with a partial analysis of the existing legal norms related to mining and processing of mineral resources. Next, it analyses mineral resource mining options free of negative environmental impacts. The fundamental tool to assess potential environmental impacts of mining is the implementation of Environmental Impact Assessment (EIA) process for a given mineral resource. In the Czech Republic environmental impact assessment is carried out by course of Act 100/2001 Coll. Its important amendment is Act 39/2015 Coll. claiming, inter alia, that the environmental impact assessment is rigidly connected with other permits and procedures, such as the zoning process and building construction permits. The article describes the environmental impacts of mining of non-energy mineral resources, including the following factors: appropriation of land, impacts on surface water, ground water and soil, noise, influence on the landscape character, and air pollution. The paper also includes a case study summarizing information on the environmental factors that may play a role in potential underground mining of graphite in the deposit Český Krumlov - Městský Vrch and the deposit Lazec - Křenov.

Our work is regarding the analysis of land use changes, in the light of “saving soil” against the expansion due to unearned plus value of land: The loss of natural and agricultural surface in front of the expanding urban environment is a critical aspect of unsustainability of urban development, especially in the way it was carried out in the past decades. The measure of the physical transition of land use and characters from a more natural condition of land surface to a new artificial one, joint with a parallel analysis of the increase of land value due to such change is nowadays a major land-policy tool. The interplay of urban economics regulation with planning, reveals new key issues in urban governance and environmental preservation. In this paper it will be shown some experiment about the impact assessment of soil take, related with the seek of valorization of property inside the planning process. Our paper reports as well about the experimental activity carried out inside the MITO Lab of the Polytechnic of Bari, where reports about property values and environmental values have been produced, specially looking at the reality of the Apulia, a southern Italian Region, that is rich of farmlands and coastlines, often invaded by constructions with a severe loss of nature, landscape and ecosystems services.

This study analyses the changes in land use in the Sado estuary (West-Central Portugal) based on a multitemporal analysis of cartographic data from the 19th century and remote sensing land use maps from the 21st century, updated by field work. A GIS plotting of land-use evolution is summarized in a quantitative table. The comparison shows the changes in land use, with increasing occupation by human economic activities, including extensive agriculture and forestry, as well as localized urbanization and industrialization. The main elements of the landscape impacted by anthropogenic uses were: i) hydrography - river dams affected the flow dynamics and sedimentary processes in the estuary; ii) vegetation – increasing agriculture and forestry reduced the areas of native vegetation, nowadays mostly occupied by vineyards, pine forests and cork oaks. iii) wetlands - tidal and alluvial plains are being occupied by rice cultivation, aquaculture, industries, and ports; iv) coastal dunes – new developments are occupying large areas of Holocene coastal dunes; v) natural environment – mining and dredging affected some habitats and biodiversity. This analysis is intended to help the territorial organization of present and future economic activities, as well as to reduce environmental and social problems, promoting long-term sustainability of this rapidly evolving region.

Factors responsible of species distribution were intensively investigated in the past, including response at different spatial scales. The aim of the present research is to review the most relevant factors explaining chironomid species distribution focusing to factors operating at different spatial scales, such as latitude, longitude, altitude, water temperature, dissolved oxygen, nutrients acting at regional, country, water basin extension. Data including chironomid species abundances from different lentic and lotic waters from Italy and other surrounding countries were analyzed with different multivariate methods: partial canonical correspondence analysis and multiple discriminant analysis. Spatial analysis included univariate Moran’I correlograms, multivariate Mantel correlograms and Moran’s Eigenvectors Maps (MEM) calculation. The results confirmed previous conclusions, that is habitat type including different running waters reaches (kryal, krenal, rhthral, potamal) and different lake types is the most significant factor in separating chironomid assemblages and spatial factors act only as indirect influencers..

A significant number and range of challenges besetting sustainability can be traced to the actions and interactions of multiple autonomous agents (people mostly) and the entities they create (e.g., institutions, policies, social network) in the corresponding social-environmental systems (SES). To address these challenges, we need to understand decisions made and actions taken by agents, the outcomes of their actions, including the feedbacks on the corresponding agents and environment. The science of Agent-based Complex Systems—ACS science—has a significant potential to handle such challenges. The advantages of ACS science for sustainability are addressed by way of identifying the key elements and challenges in sustainability science, the generic features of ACS, and the key advances and challenges in modeling ACS. Artificial intelligence and data science promise to improve understanding of agents’ behaviors, detect SES structures, and formulate SES mechanisms.

Levels of trace element pollution in surface soil can be estimated using soil analyses and leaching tests. These methods may reveal different results due to the effect of soil properties, such as grain size and mineral composition, on elemental availability. Therefore, this study advocates an alternative method for monitoring and assessment of trace element pollution in surface soil using terricolous fruticose lichens. Lichens growing at abandoned mine sites and unpolluted areas in southwest Japan and their substrata were analyzed using inductively coupled plasma-mass spectrometry and X-ray fluorescence spectrometry to clarify the relationships between Cu, Zn, As, and Pb concentrations in lichens and soils, including their absorption properties. Concentrations of these elements in the lichens were positively correlated with those in the soils regardless of lichen species, location, habitat, or conditions of soils. The analyzed lichens had neither competitive nor antagonistic properties in their elemental absorption, which made them good biomonitors of trace element pollution in surface soil. The distribution maps of average Cu, Zn, As, and Pb concentrations at each sampling region detected almost all of the Cu, Zn, and As pollution of the soils. Therefore, lichens could be used in practical applications to monitor Cu, Zn, and As pollution in surface soils.

The theory and working principle of fabric phase sorptive extraction (FPSE) is presented that eloquently explains the mystery behind this new and powerful sample preparation technique. FPSE innovatively integrates the benefits of sol-gel coating technology and the rich surface chemistry of cellulose/polyester/fiberglass fabric, resulting in a microextraction device with very high sorbent loading in the form of an ultra-thin coating. This porous sorbent coating and the permeable substrate synergistically facilitate very fast extraction equilibrium. The flexibility of the FPSE device allows for direct insertion into original, unmodified samples of different origin. Strong chemical bonding between the sol-gel sorbent and the fabric substrate permits the exposure of FPSE devices to any organic solvent for analyte back-extraction/elution and to highly acidic or basic environments (pH 1-12) if required. A sol-gel derived sorbent, highly polar sol-gel poly(ethylene glycol) coating, was generated on cellulose substrates. Five cm2 segments of these coated fabrics were used as the FPSE devices for sample preparation using direct immersion. An important class of environmental pollutants, substituted phenols, was used as model compounds to evaluate the extraction performance of FPSE. The high primary contact surface area (PCSA) of the FPSE device and porous structure of the sol-gel coatings resulted in very high sample capacities and incredible extraction sensitivities for both the compound classes in a relatively short period of time. Different extraction parameters were evaluated and optimized. The new extraction devices demonstrated part per trillion level detection limits for substituted phenols, a wide range of detection linearity, and good performance reproducibility.

Wastewater-Based Epidemiology (WBE) is currently used to monitor not only the spread of the pandemic virus SARS-CoV-2 but also for other viruses in endemic conditions, particularly in the absence of syndromic surveillance. Continuous monitoring of sewage requires high costs and significant time investment, highlighting the need for standardized methods and structured monitoring strategies. In this context, we conducted weekly wastewater monitoring in northwestern Italy, targeting Human Adenovirus (HAdV), Norovirus Genogroup II (NoVggII), Enterovirus (EV), and SARS-CoV-2. Samples collected at the entrance of treatment plants were concentrated using PEG/NaCl precipitation and viral nucleic acids were extracted and detected by real-time (RT-)qPCR. NoVggII resulted the most identified target (84.4%), followed by HAdV, SARS-CoV-2, and EV. Only HAdV and EV exhibited seasonal peaks in spring and summer. SARS-CoV-2 results compared with data previously collected in the same study area (February 2021 to September 2021) revealed a shift from an epidemic to a pandemic status, likely due to the evolution of variants. In conclusion, WBE, using standardized methods and an efficient monitoring strategy, proves valuable for virus surveillance in pandemic and epidemic scenarios, enabling the identification of temporal-local distribution patterns that are useful for making informed public health decision.

There has been a growing awareness of the need to implement environmentally friendly operations in the hotel industry, but most studies focus on guest behaviors. Only a few studies investigate employees’ willingness to comply with hotels’ green practices. This study seeks to further the investigation from the human resource perspective. Using alumni from a tourism and hospitality programs, this study collected 233 responses. The study hypothesizes that the employees’ green ability consisting of environmental awareness, environmental knowledge, and environmental skill creates a positive impact on hotels’ green ability. The results indicate that employees contribute approximately a fifth of hotels’ ability to implement greener practices.

Esterquats constitute a unique group of quaternary ammonium salts (QASs) that contain an ester bond in the structure of the cation. Despite the numerous advantages of this class of compounds, only two mini-reviews discuss the subject of esterquats: the first one (2007) briefly summarizes their types, synthesis, and structural elements required for a beneficial environmental profile and only briefly covers their applications whereas the second one only reviews the stability of selected betaine-type esterquats in aqueous solutions. The rationale for writing this review is to critically reevaluate the relevant literature and provide others with a “state-of-the-art” snapshot of choline-type esterquats and betaine-type esterquats. Hence, the first part of this survey thoroughly summarizes the most important scientific reports demonstrating effective synthesis routes leading to the formation of both types of esterquats. In the second section, the susceptibility of esterquats to hydrolysis is explained, and the influence of various factors, such as the pH, the degree of salinity or the temperature of the solution, was subjected to thorough analysis that includes quantitative components. The next two sections refer to various aspects associated with the ecotoxicity of esterquats. Consequently, their biodegradation and toxic effects on microorganisms are extensively analyzed as crucial factors that can affect their commercialization. Then, the reported applications of esterquats are briefly discussed, including functionalization of macromolecules, such as cotton fabric as well as their successful utilization on a commercial scale. The last section demonstrates the most essential conclusions and reported drawbacks that allow us to elucidate future recommendations regarding the development of these promising chemicals.

Bacteria’s ability to withstand the detrimental effects of antimicrobials may take the form of resistance or tolerance with the minimum inhibitory concentration (MIC), the mutant prevention concentration (MPC), and the mutant selection window as salient concepts. Isolates exposed for 30 days to different concentrations of selected antibiotics, biocides, and heavy metals, singly and in combination, were additionally exposed to very high (15 × MIC) concentrations of ampicillin., and their tolerance was calculated the time to kill 99.9% of the isolate population (MDK99.9). These values were increased by 30 to 50% in test isolates compared to the untreated control. BAC 10-exposed isolates had the highest tolerance increase, and the tolerance appeared to originate from two sources, i.e., stochastic persistence and genetic-induced persistence, involving multiple genes using diverse mechanisms. The mutant selection window of the isolates to ampicillin, amoxicillin, and oxytetracycline also slightly increased compared to the control, indicating the amplification of persister cells during the 30-day exposure. These findings indicate that bacterial exposure to sub-inhibitory concentrations of environmental chemical stressors may not always result in the development of antimicrobial resistance but could initiate this process by selecting for persisters that could evolve into resistant isolates.

Introduction: Different factors such as rapid growth of population, urbanization and industrialization of communities have detrimental effects on the environment. In regard to the importance of the environment and its fundamental role in sustainable development along with the awareness and attitude of the people of Yazd which has not yet been assessed, this study aims to assess the level of awareness, attitude and environmental literacy of the people of Yazd in relation to environmental issues and challenges in the year 2017. Materials and methods: In this descriptive-analytical study, the sample size was obtained from 410 Yazd city residents through prior studies and the Cochran formula. The sample was then selected by the stratified random sampling method. The data selection tool was a questionnaire with questions on demographic characteristics, awareness level, attitude and practices in relation to menopause. The data was analyzed upon collection by the SPSS-20 software and Mann-Whitney, Kruskal-Wallis, and Chi-Square non-parametric tests along with the Spearman correlation test. In this study, the significance level was considered as 0.05. Results: In this study, a total of 404 questionnaires were completed and evaluated. Based on the obtained results, 224 individuals (55.4%) male, 53.3% married, 31.2% had at least a bachelor’s degree and the majority of individuals (40.1%) were in the 18-27 age group. In terms of area of residence, 64.1% reside in region 2. From all the participants, 51.3% of the participants believed that the main environmental issue in Yazd was water deficiency and pollution. The awareness score was statistically significant with the age, education level and employment status variables. Attitude only had significant relationship with the employment status variable. The relationship between the practices score was statistically significant with the age, marital status, and area of residence variables. There is a significant relation between age, income level and knowledge level but there is no significant relation with attitude levels. There is no significant relation between gender, education level, marital status, area of residence, awareness and attitude levels (p-value > 0.05). There is a positive correlation between awareness, attitude and practices scores. The results indicated that the attitude score of most participants (51.5%) was lower than the average score but the awareness and practices score of most participants was average. Conclusion: Based on the results of this study, although the awareness of Yazdi citizens on some environmental issues and institutions that are active in the environmental pollution control field in the country appears low, but in general, the awareness of the people of Yazd, specifically regarding health issues stemming from pollution was assessed as adequate. Considering the importance of environmental factors’ role in communities’ health and its continuous improvement, due to the expansion of automated life namely in large cities within the country, it is necessary to conduct various researches to identify and control these factors and to carry out interventional studies to determine suitable solutions before implementing them.

The increasing regulatory pressure to monitor and reduce GHG emissions and air pollutants requires cost-effective methods for their surveillance. The most common technique used for scientific investigations on gas concentration monitoring in barns are accurate but expensive and with a complex maintenance. This research study analysed the potential use of a low-cost portable measurement devices for the measurement of ammonia (NH3) and carbon dioxide (CO2) concentrations in an open dairy barn. A comparison between gas concentrations acquired at different heights from the floor by using portable devices and those acquired by a photoacoustic infrared multigas spectroscope (i.e., reference measurement) in the same sampling locations was carried out to determine the precision of the low-cost portable devices. The performance of low-cost portable devices was statistically analysed by the application of the one-way analysis of variance, correlation analysis and regression analysis. The results showed a significant difference between gas concentration values at various heights from the floor for both NH3 and CO2. The correlations between concentrations acquired by the low-cost portable device and the INNOVA were statistically significant (r=0.83; P&lt;0.001) for gas concentrations monitored at 0.4 m from the floor. Compared with the reference measurement device, the low-cost devices were effective in the monitoring of NH3 concentrations at 0.40 m from the floor though it underestimated them in the barn at increasing of the height from the floor, whereas the device was not adequate for CO2 concentrations. In detail, the relative measurement error of the low-cost devices compared to INNOVA was reduced close to the floor during NH3 concentration measurements. Within these limitations, this device could be useful for monitoring NH3 concentration in the barn and to assess variation in NH3 concentrations mainly related to the animal occupied zone. Further efforts are needed in this field of research to identify low-cost device that could simplify emission estimation from open dairy barns.

The intestinal microbial community of aquatic animals is closely related to the environment and thus affects the health of aquatic animals. Here we investigated annual variation of intestinal bacteria community structures of Ruditapes philippinarum cultured using two different methods, bottom sown and raft hanging. Bacterial diversity of seawater and sediment in different seasons was examined as well. Correlation between R. philippinarum intestinal bacteria community structures and environmental factors was analyzed. The results showed that in the two aquculture areas where R. philippinarum was differentially cultured, bacteria community structure of seawater and sediment both altered with seasons. However, neither seasonal changes nor difference in culture methods could significantly affect the intestinal bacteria community structures of R. philippinarum. Additionally, in terms of the alpha diversity of intestinal bacteria communities, there was no significant difference in R. philippinarum cultured using the two methods. For benthic cultured clams, alpha diversity of the intestinal bacterial communities was often higher than that of the environmental bacterial communities. For raft hanging cultured calms, Alpha diversity of the intestinal bacterial communities was normally comparable with that of the environmental counterparts. Beta diversity analysis showed that the intestinal bacterial community structure of R. philippinarum was mainly determined by both deterministic and stochastic processes. Correlation analysis showed that the intestinal bacterial community structures of R. philippinarum were determined by a variety of environmental factors. For clams collected from the benthic culture area, the intestinal bacterial structure was more correlated with the physicochemical properties of sediment in comparing with those of seawater. For clams collected from the raft-culture area, the intestinal bacterial structure was mainly determined by the phsicochemical characteristics of seawater. This study helps us to better understand the bacterial community structure in complex aquaculture ecosystems, providing a reference for healthy shellfish aquaculture and ecosystem protection in aquaculture area.

Cotton is the most ubiquitous and profitable fiber with diverse industrial and domestic applications. Grown in over 100 countries, it has a global market value of about $40 billion and employs over 350 million people from fields to textile mills, contributing about 7% of total labor-force recruitment in developing economies. Cotton has an indeterminate growth habit and an extensive tap root system affected by soil physicochemical and environmental conditions. There is a consensus among experts that conventional cotton cultivation still has a long way to attain sustainability, which is essential if cotton will maintain its competitive edge over other natural and synthetic fibers like hemp, polyesters, and rayon. Despite several efforts already committed to growing cotton sustainably, sustainability has eluded cotton cultivation globally because of the intense farm inputs (freshwater, pesticides, and heavy-duty equipment) needs, especially in developing economies. Some of the technological advancements towards achieving the goal of sustainable cotton cultivation include the development of new varieties, improved irrigation and mulching and precision agriculture techniques, application of remote sensing and Unmanned Aerial Systems (UAS) combined with image processing, and the introduction of autonomous and multi-purpose robotic platforms for growing and harvesting cotton. This review attempts to evaluate the successes already achieved by stakeholders in moving cotton towards sustainable production and identify areas where efforts are still needed to reach sustainable production and improved profitability goals for cotton with projections for future research directions.

Many factors drive land desertification, especially in arid and semi-arid regions. However, the numerous driving factors of desertification make analyses computer expensive. Cloud computing comes along to address this problem, especially in developing countries. The objective of this work was to assess the sensitivity of the East Atlantic Basin, Brazil, to desertification using the Mediterranean Desertification and Land Use (MEDALUS) model and Google Earth Engine (GEE). The model is composed of four environmental Quality Indices (QIs) associated with soil (SQI), vegetation (VQI), climate (CQI) and management (MQI), and contains factors influencing the desertification process. Digital databases of the factors were pre-processed and uploaded to GEE for analysis. We report Environmentally Sensitive Areas (ESAs) and Environmentally Critical Factors (ECF) maps of the East Atlantic Basin, which showed that most of the basin is in either critical (49.4%) or fragile (35.7%) state of sensitivity. In contrast, only a smaller portion of the area is unaffected (5%) or potentially affected (10.1%). Sensitivity to desertification was inversely correlated with the presence of vigorous vegetation. A joint analysis of ESAs and ECF shed light on the importance of each factor in the sensitivity to desertification. The East Atlantic Basin shows a high degree of sensitivity to desertification, thereby demanding more attention and establishment of measures to mitigate the negative impacts of the desertification process.

Many factors drive land desertification, especially in arid and semi-arid regions. However, the numerous driving factors of desertification make analyses computer expensive. Cloud computing comes along to address this problem, especially in developing countries. The objective of this work was to assess the sensitivity of the East Atlantic Basin, Brazil, to desertification using the Mediterranean Desertification and Land Use (MEDALUS) model and Google Earth Engine (GEE). The model is composed of four environmental Quality Indices (QIs) associated with soil (SQI), vegetation (VQI), climate (CQI) and management (MQI), and contains factors influencing the desertification process. Digital databases of the factors were pre-processed and uploaded to GEE for analysis. We report Environmentally Sensitive Areas (ESAs) and Environmentally Critical Factors (ECF) maps of the East Atlantic Basin, which showed that most of the basin is in either critical (49.4%) or fragile (35.7%) state of sensitivity. In contrast, only a smaller portion of the area is unaffected (5%) or potentially affected (10.1%). Sensitivity to desertification was inversely correlated with the presence of vigorous vegetation. A joint analysis of ESAs and ECF shed light on the importance of each factor in the sensitivity to desertification. The East Atlantic Basin shows a high degree of sensitivity to desertification, thereby demanding more attention and establishment of measures to mitigate the negative impacts of the desertification process.

Additive Manufacturing (AM) has been proving suitable to support or even replace traditional manufacturing in several industries, offering many advantages such as delivery time and reduction in terms of material waste, energy consumption and greenhouse gas (GHG) emissions. This study aimed to carry out a comparative assessment of the life cycle, from gate to gate, in the production of a low alloy carbon steel flange part using ER-90 wire. The methods utilized were Wire and Arc Additive Manufacturing (WAAM) and conventional manufacturing (CM) by forging, and comparative factors were energy demands, GHG emissions and generated solid waste. The total energy consumption in WAAM was 10,239.40 MJ, total carbon footprint in CO2 equivalent (CO2e) was 714.1 kgCO2e kg-1, and generated solid waste was 68.6 kg, respectively, 90%, 95% and 76% lower than consumption calculated in conventional manufacturing.

We conduct a thematic analysis of a U.S. adult sample’s self-reported motives and perception of environmental activists’ motives to engage in pro-environmental behavior via a qualitative online survey. We identified themes using a two-stage coding procedure, whereby the research team first helped to code all content into one or more of 17 inductive content categories, then the lead investigator examined themes in each of the categories and created 5 themes based on both inductive and theoretical (e.g., moral foundations theory) considerations: a) harm and care, b) purity, c) waste and efficiency, d) spreading awareness, and e) self-interest (mostly non-financial). Endorsement of themes were qualitatively similar across individuals’ own self-described motives and perceptions of environmental activists’ motives.

This study provides a detailed investigation into the pathways through which microplastics from urban sources are transported to marine ecosystems, their distribution across different environments, and their impacts on marine life. Utilizing a combination of water and sediment sampling across urban, riverine, and marine environments, the research quantitatively assesses the concentration and types of microplastics present, and evaluates the ecological consequences of their accumulation in marine ecosystems. The findings reveal a significant concentration of microplastics in all examined environments, with the highest levels detected in urban areas, closely linked to industrial activities and inadequate waste management practices. The study documents a variety of microplastic polymers, with polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET) being the most prevalent. A substantial impact on marine organisms was observed, including evidence of microplastic ingestion across a wide range of species and indications of stress and physical damage to coral reefs. Seasonal variations indicate that microplastic concentrations peak during periods of high rainfall, suggesting urban runoff as a critical pathway for microplastic transport. The study concludes with recommendations for improving waste management practices, enhancing public awareness and engagement in plastic recycling efforts, and implementing policies aimed at reducing the production and use of single-use plastics. This research underscores the urgent need for coordinated actions to mitigate the pervasive issue of microplastic pollution, highlighting the role of urban management and policy interventions in safeguarding marine ecosystems.

This study focused on the assessment of folk media aimed at Environmental Communication (EC) in the Guna Community and suggested the dominant Guna Community folk media for environmental communication and preservation to conserve Mount Guna. Guna Mount is the home of different biodiversity and the tower of water, but it is becoming degraded. Folk media are operative in environmental communication and preservation. They have the power to transmitted environmental messages that incorporate cultural values, beliefs, and attitudes with societal needs. Folk media are locally oriented, easily accessible, flexible, portable, inclusive, and relatively inexpensive. A qualitative research approach was employed for this research. Ethnographic research design, snowball, and purposive sampling techniques were used to select the respondents. The researchers were gathered the data through in-depth interviews, focus group discussion, and observation. For this survey, 16 FGDs, 45 individual in-depth interviews, and participant observation were employed. Guna community has unique and indigenous folk media that use as a source of entertainment, information, and education. Their folk music, songs, dances, campfire storytelling, traditional motifs, fairs, and festivals, and folk poems are the dominants. Using folk media for operative ecology preservation is vital in the form of EC that inspires and develops positive behavior in the community by educating about environmentalism in the method of facilitating environmental issues incorporating the latest message. Finally, we recommended some folk media for developmental activities that use inform of advocacy regarding recommended reasons

This paper undertakes a comprehensive review to underscore the central role of sustainability in the evaluation and innovation of jet grouting technologies. It meticulously traces the evolution of evaluation methodologies, emphasizing the imperative of sustainable practices throughout history. Traditional evaluation paradigms are examined alongside contemporary trends, with a particular focus on sustainability metrics and visualization techniques. Through an examination of innovative jet grouting technologies, this paper illustrates how sustainability principles have driven advancements aimed at improving the efficiency and environmental impact of jet grouting methods. Central to this review is an assessment of sustainability across multiple dimensions, including method applicability, installation and operational compatibility, and the performance of the resulting jet grouted piles. By emphasizing sustainability considerations, the paper highlights the intrinsic link between environmental integrity and technological innovation in the field of jet grouting. In addition, it discusses analytical evaluation methods designed to proactively address sustainability concerns prior to construction, thereby promoting a more environmentally responsible approach. Finally, this paper presents a pioneering evaluation framework that integrates real-time monitoring and visualization tools, allowing stakeholders to track sustainability milestones throughout the construction process. By emphasizing sustainability as a guiding principle, this review advocates for a paradigm shift toward more ecologically sound and resilient jet grouting practices.

We currently face several, interlinked environmental crises, including climate change, habitat destruction and biodiversity loss. However, many governments seem unwilling to take strong and immediate action to address these threats, preferring to promote neoliberal approaches to allow consumers and the general public to make environmentally friendly choices. This is despite neoliberal approaches being much less likely to be successful than government leadership, taxation, subsidies, and legislation in addressing environmental issues. In this study, we examine public perception of environmental threats and solutions to these threats, in a survey, mainly completed in the UK. Climate change is seen as the biggest issue, likely due to recent activist campaigns and subsequent media attention on the issue. Neoliberal attitudes, such as green consumer choices to environmental concerns, do still dominate in a series of possible presented solutions, and score more highly than lifestyle changes such as changing diet. However, when questioned specifically about plastic pollution, government intervention to ban all unnecessary plastic scored very strongly, indicating a shift from a consumer driven response. Furthermore, most participants think they are at best only partly ‘doing their bit’ to protect the environment. The results demonstrate that the public are aware that not enough is happening to protect the environment and provide evidence that there is willingness for stronger government intervention to address environmental issues, although there is potential resistance to major lifestyle changes.

This article aims to investigate gaps in the law and policies on e-waste management in communi-ties of Thailand and suggests a guideline for improving, developing, and designing legal measures and state policies for more effective enforcement of the law on e-waste management in communities. The findings reveal that the currently applicable law of Thailand lacks effective approaches and rules for e-waste management. Also, there is not any implementation of key envi-ronmental principles for e-waste management in communities, such as the Polluter Pays Principle (PPP) that requires manufacturing companies to take part in being responsible for disposal ex-penses or the Public Participation principle that requires users, manufacturers, distributors, and government agencies to take parts in disposing e-waste. As a result, problems of e-waste in com-munities of Thailand have been continuously increasing. According to such problems, the authors suggest that legal measures on e-waste management in communities should be specifically de-signed by implementing key environmental principles as a basis in determining formats and guidelines of e-waste management, especially participation of all sectors that can help in solving and reducing e-waste in communities that is harmful to health, sanitation, and environment.

This study aims to explain individual engagement in sustainable waste management behaviors (SWMBs) based on the application of protection motivation theory (PMT). SWMBs include waste avoidance, green purchasing behavior, reuse and recycle, and waste disposal behaviors. This study applies PMT to explore how individuals’ SWMBs are influenced by their perceived threats caused by environmental contamination from waste disposal and their perceived coping capability. The Bangkok metropolitan area was selected as a case study because it has faced serious waste management problems caused by massively increasing amounts of solid waste during the last ten years. Questionnaire surveys were conducted with 193 public and private officers residing in the city of Bangkok. The one-way analysis of variance (ANOVA) was performed to justify the effect of individual threat appraisal and coping appraisal on the engagement in SWMBs. The results demonstrated that respondents’ self-efficacy highly influenced all types of SWMBs. The perceived probability of being impacted from pollutants influenced all of the SWMBs except green purchasing behaviors. Response efficacy did not influence all SWMBs; however, the perceived severity of adverse consequences caused by pollutants highly influenced reuse and recycle behaviors. It could be suggested that PMT is well suited for investigating low-cost and simple SWMBs. It could also be suggested that different communication campaigns should be established to enhance citizens’ engagement in each type of SWMB.

Sulfolane, a highly water-soluble industrial solvent, has raised environmental concerns due to its persistence once released into the environment. To assess the extent of contamination effectively, reliable analytical methods are essential. In this review, we delve into the published literature on sulfolane analytical procedures. Existing guidelines for sampling from environmental matrices provide a solid foundation for sul-folane analysis. Notably, there is little variation in the choice of determination method, with GC-MS or GC-FID being favored across studies. However, substantial variability emerges in sample prep-aration methods. Many procedures rely on large quantities of environmentally hazardous solvents, such as dichloromethane, during extraction. Nevertheless, by incorporating extraction enhancement techniques proposed in various studies, it is possible to develop more eco-friendly extraction processes. Overall, this field calls for further re-search to devise efficient and environmentally sustainable analytical methods for sulfolane analysis. Through this review, insights into the challenges at hand and potential solutions can be gained, offering a foundation for the development of novel sulfolane analysis methods applicable to a range of environmental matrices.

The purpose of this article is to analyze, in a three-stage research, the relationships between environmental expenses, the improvements achieved in 5 environmental variables analyzed and efficiency, from an economic and operational perspective. The stages of this research are analyzing the sustainability reports to determine the level of information, analyzing the economic and operational efficiency, and analyzing the alignment with the environmental priorities of the Eco Ports-ESPO (European Sea Ports Organization). The results reveal that (1) the type of traffic does not condition environmental actions; (2) environmental performance (improvements) depends on environmental expenditures; (3) environmental spending and efficiency in port operations are correlated; and (4) environmental spending and port economic efficiency are correlated.

Environmental decentralization (ED), or the allocation of environmental protection affairs and responsibilities among various administrative authorities, affects the effectiveness of environmental regulation in promoting green total factor productivity (GTFP). Based on panel data of 30 Chinese provinces from 2001 to 2015, this paper employs dynamic panel models to test the effects of environmental regulations (environmental protection investment, ENV; pollutant discharge fees, PDF) on GTFP, with or without being influenced by ED. Without the impact of ED, GTFP is significantly inhibited by ENV while significantly promoted by PDF. Considering the impact of ED, with the strengthening of ED, the negative effects of ENV on GTFP is significant; contrarily, the positive effects of PDF on GTFP is significant; improving provincial ED adds negative effects of ENV, while reduces the positive effects of PDF; increasing prefectural ED reduces negative effects of ENV; expanding county-level ED adds the positive effects of PDF. Therefore, to boost GTFP growth, prefectural environmental protection authorities should have more autonomy in ENV, while the county-level should have more autonomy in PDF.

Ecological footprint calculators are digital tools that help individuals calculate their environmental or climate impact, with the aim of stimulating pro-environmental behaviour change. These footprint calculators typically take an information-provision approach, but this strategy assumes that increased levels of knowledge result in increased levels of pro-environmental behaviour (i.e., a reduced footprint). This is not a given – existing literature on the relationship between environmental knowledge and pro-environmental behaviour is inconclusive, and this relationship may be different from that of environmental knowledge and ecological footprint. As such, we investigated the relationship between environmental knowledge and ecological footprint as estimated by a footprint calculator. 448 Dutch participants completed an online survey, including an ecological footprint calculator. We found no evidence for a relationship between environmental knowledge and ecological footprint calculator outcome. Rather, an exploratory analysis of our data showed that environmental values were more important predictors of ecological footprint. The finding that increased levels of knowledge are not related to a reduced ecological footprint suggests that calculators would do well to move beyond information provision, and employ additional behaviour change strategies. Based on our exploratory analysis, we provide several concrete examples of potential strategies.

The present study identified the influence of green advertising and eco-labels on the attitude and environmental awareness of millennials who purchase ecological products in shopping centers in Ecuador. The research was quantitative, correlational and with a cross-sectional design. A total of 430 millennials participated in the study. A 20-question survey was applied in person outside the shopping centers of Quito and Guayaquil - Ecuador. The convergent and discriminant validity of the research model was verified using Confirmatory Factor Analysis (CFA) and Structural Equation Models (SEM). SPSS 20 and AMOS 24 programs were used for statistical analysis. The results show that green advertising influences environmental attitudes (β: 0,245) and awareness (β: 0,110) and specifically influences purchasing behaviour (β: 0,154) for green products. Although eco-labels do not directly influence purchasing behaviour (β: 0,128), they influence the attitudes (β: 0,406) and ecological awareness (β: 0,277) of millennials who buy organic products. This article is one of the first studies to identify the relationship between green advertising elements and green product purchasing behaviors among millennials in a developing country, concluding that marketing strategies based on green advertising and eco-labels have an impact on the attitude and environmental awareness of millennials, but only advertising directly affects purchasing behaviour while eco-labels do not. This research has social implications since it corroborates that millennials are concerned about environmental problems and are willing to contribute to sustainability.

The pressure on freshwater resources is leading to diminishing flows in some of the critical river systems across the globe and India is no exception and this is mainly because of water withdrawal for irrigation, which is often to the tune of 70% to 80% with some proportion for domestic and industrial use. While graduating from the concept of environmental flows and its assessment methodologies in India, the water-managers, the researchers and the conservationists are now moving towards answering the next question if the rivers are to be revived, then where will the water come from, especially in the case of over-allocated rivers, including the river Ganga. While the logical way is to look at the biggest user of water, i.e. irrigation, it remains to be seen whether the irrigation water savings will actually lead to enhancing flows in a river, complementing the efforts towards maintaining e-flows in rivers, or whether it will lead to more area under agriculture, bring changes in cropping patterns towards more water-intensive crops or result in something else. This is a growing debate across the globe, where India is no exception, and there has been a wide range of opinions in this regard. This paper discusses the process, findings and lessons from a joint initiative involving farmers, the Uttar Pradesh state Irrigation and Water Resources Department, Bijnor District Administration and a conservation organisation to enhance flows in a rivulet, called karula River, which is part of the Ganga river system.

The research investigates the role the environmental manager plays to ensure a successful (or not) implementation of environmental performance within an organization. It is based on interviews of 5-7 actors per company within a sample of 7 companies (42 interviews). We build upon bias of perception of the various actors interviewed within each company to define 4 paradoxes related to the roles and mission of the environmental manager that hinder proper efficiency of environmental management at company level. Paradox 1 is that no one takes ownership of environmental performance within the organization. Paradox 2 is that the environmental manager is in an awkward situation vis-à-vis his boss. Paradox 3 is that the role of the environmental manager is ambiguous vis-à-vis employees. Paradox 4 is that corporate and product approaches are decoupled. We suggest that these paradoxes interact and form a vicious cycle that may in part be responsible for the environmental decoupling phenomenon – the fact that companies often adopt a sustainability policy symbolically without implementing it substantively. Our research suggests that, by leveraging the leadership of the environmental manager through organizational and motivational measures, the vicious cycle can be transformed into a virtuous cycle and the human motivation can become a driver for green change within corporations. We proposed the SEA (Shaping Environmental Action) model based of 4 pillars: information, motivation, organization and strategy.

Abstract: To explore the interrelationship between groundwater microbial communities and hydrochemical characteristics in Mancheng district, Baoding city, samples from karst groundwater and porous groundwater were collected respectively. The hydrochemical analysis and 16s RNA gene V4-V5 region sequencing method were used to detail the water environmental characteristics and microbial community distribution pattern in the study area. The hydrochemical results reveal significant differences in major ion contents and other hydrochemical indices between karst water and porous water. Microbial community analysis demonstrates that Proteobacteria, Actinobacteria, and Firmicutes are the dominant taxa in both types of water bodies, but their proportions vary significantly in different water bodies. The difference in microbial communities between karst water and porous water reflects the influence of environmental factors such as ion concentration and pH on microbial distribution. Redundancy analysis (RDA) indicates significant associations between microbial community composition and environmental factors in both types of groundwater environments. Studying the distribution pattern of microbial communities and the connection with environmental factors in two types of groundwater provides important basis for interpreting the functional roles of microbes in groundwater ecosystems.

Although the positive relationship between religion and environmental behavior is well-argued, empirical research about the relationship between religion and public pro-environmental behavior is relatively lacking. This paper aims to explore the group differences in the influence of religion on public pro-environmental behavior and the mediating role of environmental risk perception in religion and public pro-environmental behavior. Using the Chinese General Social Survey data in 2013 for empirical analysis, this study’s results show that there are group differences in the impact of religion on public pro-environmental behavior. Women with religious beliefs are more willing to engage in public pro-environmental behavior than those without religious beliefs. Religious believers over the age of 45 are more willing to participate in public pro-environmental behavior than those without religious beliefs. Political participants with religious beliefs are more willing to practice public pro-environmental behavior than those without religious beliefs. In addition, we found that environmental risk perception can act as partial mediation in religious and public pro-environmental behavior. In other words, religious beliefs are deeply embedded in local political and social culture. In order to correctly understand the relationship between religion and public pro-environmental behavior, it is necessary to consider religion in a specific cultural background.

The design and usage of the addressed combined fiber-optic sensors (ACFOS) and the multisensory control systems of the greenhouse gas concentration on their basis are investigated. The main development trend of the combined fiber-optic sensors (CFOS), consisting of the fiber Bragg grating (FBG) and the Fabry-Perot resonator (FPR), which are successively formed at the optical fiber end, is highlighted. The addressed fiber Bragg structures (AFBS) usage instead of the FBG in the CFOS leads not only to significant cheapening of the sensor system due to microwave photonics interrogating methods, but also to increasing its metrological characteristics. The structural scheme of the multisensory gas concentration monitoring system is suggested. The suggested scheme allows detecting four types of the greenhouse gases (СО2, NO2, CH4, OX) depending on the material and thickness of the polymer film, which is the FPR sensitive element. The usage of Karunen-Loeff transform (KLT), which allows separating each component contribution to the reflected spectrum according to its efficiency, is proposed. In the future, it allows determining the gas concentration at the AFBS address frequencies. The estimations have shown that the ACFOS design in the multisensory system allows measuring the environment temperature in the range of −60…+300 °C with an accuracy of 0.1–0.01 °C, and the gas concentration in the range of 10…90% with the accuracy of 0.1–0.5%.

The rehabilitation of abandoned mining sites is an increasingly pressing issue in the context of sustainable development. Recent research has emphasized the need for a holistic approach to the abandoned mining sites and their environmental rehabilitation. Based on field analysis, environmental assessments, satellite imagery processing and geographic information operations, this paper pushes forward the existing knowledge by doing a comprehensive assessment of abandoned mining sites in the Romanian Carpathians and by proposing innovative and sustainable rehabilitation solutions. Our findings highlight that abandoned mining sites and their surrounding territories in the Romanian mountains have significant ecological imbalances and complex socio-economic issues. The findings also suggest that by adopting innovative, integrated, and sustainability-oriented approaches, territories affected by mining can be transformed into valuable and sustainable spaces to meet human needs. We conclude by presenting the importance of innovation in ecological reconstruction and spatial-functional reintegration of mining sites in mountain areas as a useful tool in making fair decisions, both in the context of implementing appropriate development policies as well as for resilience and environmental sustainability of mining-affected mountain areas.

The opportunities and potential of Artificial Intelligence (AI) in Environmental Assessment (EA) are often mentioned. However, do we in the EA field understand the implications of what is happening in other biological sciences, and are we preparing for the changes that are coming? This interdisciplinary letter focuses on AI-driven developments in biodiversity data and analysis as a starting point for stimulating discussion about what AI means in practice for the field of EA. We highlight implications for training, transformation of practice and decision making as first steps in a research agenda.

Lead exposure is associated with poor cognitive development in children. Very few studies in sub-Saharan Africa (SSA) have studied blood lead levels (BLLs) and non-gasoline sources of exposure in children. Data from a birth cohort in Benin (2011-2013) suggested that 58% of one-year-old children had BLLs > 50 ug/L. We aimed to investigate the prevalence of elevated BLLs (>50 µg/L and >100 µg /L) among 425 of these children at six-years-of-age in 2016-18 and to compare BLLs between age one-year and six-years and study sources of lead at six years. BLLs were analyzed by inductively coupled plasma mass spectrometry. Multiple linear regression and quantile regressions were used to study potential sources of lead. The prevalence of BLLs >50 µg/L in children was 59.5% [Geometric Mean (GM) 56.4 µg/L, 95% CI: 54.1 - 58.7] at six years of age compared to 54.8% [GM 56.5 µg/L, 95% CI: 53.4-59.6] at one year of age. The prevalence of children with BLLs >100 µg/L decreased from 14.4% at one year of age to 8.2% at six years of age. After adjustment for all other covariates, consumption of peanut more than once per month was significantly associated with a 22.0% (95% CI: 4.6, 42.5) increment in BLLs at six years compared with no consumption. Consumption of bushmeat killed by lead bullets at six years was associated with an increase in the higher percentiles of BLLs (P75) compared with the absence of this source. Other potential sources of lead associated with BLLs with marginal significance were consumption of rice, paternal occupational exposure, and the presence of activity with the potential use of lead. This prospective cohort confirms the persistently high prevalence of elevated BLLs in children residing in a rural region in the south of Benin as well as the presence of multiple and continuous sources of lead. These results highlight the need for prevention programs to reduce and eliminate lead exposure in children.

It was believed that the construction of large dams in the upper tributary basin of the Chao Phraya River (CPR) has caused sediment load reduction in the CPR system by 75–85%. Based on historical and observed river flow and sediment data measured during 1922–2019, we investigated the effects of three large dams, the Sirikit, Naresuan, and Khwae Noi dams, on river runoff and sediment loads supplied to the CPR using Mann-Kendall (MK) test and the double mass curve (DMC). Results from this study revealed that the Nan River contributed approximately 40% and 57% of the runoff and total sediment load (TSL) to the CPR, respectively. The water regulation by the Naresuan diversion dam has mainly caused the reduction on annual runoff and TSL downstream of each dam. The results from this study also reveal that the sediment load observed at the headwater (C.2) of the CPR still increased after the construction of the Sirikit dam due to the expansion of irrigation areas downstream of the dam and the channel improvement in the lower reach of Nan River. After the three major dams were operated, the sediment load at C.2 reduced by 31% compared that discharging during the pre-construction period.

Shared public buildings have become centers of innovation, integrating advanced technologies to meet evolving societal needs. With a heightened emphasis on occupants’ health and well-being, these buildings serve as hubs for technological convergence, facilitating seamless connectivity and intelligent data analysis and management. Within this context, environmental monitoring emerges as a foundational element, pivotal to all aspects of building management. This article provides findings from the nationally funded RE-START project, which focuses on shared public buildings, with special regard to educational and medical facilities. The project explores enhanced indoor air quality monitoring, focusing in particular on CO2 concentration that is directly correlated with occupancy, as a fundamental element for developing health and safety protocols, energy efficiency strategies, integration of smart building technologies, and data-driven energy management. The intersection of environmental monitoring, energy efficiency, security, and IoT technologies in in indoor spaces are relevant. The outcomes of the study reveal the delicate nature of all the involved components, that need to be carefully developed in an integrated manner.

This study examines the complex relation among environmental taxes, productive capacities, urbanization, and their collective effects on environmental quality in Africa, drawing on two decades of data from twenty African countries. It situates the study within the broader discourse on sustainable development and economic growth, emphasizing the Environmental Kuznets Curve (EKC) framework to examine the relationship between economic development, characterized by urban expansion and increased productive capacities, and the adoption of environmental taxes amidst the continent’s diverse economic and environmental environments. Using advanced econometric techniques, including the Cross-Section Augmented Autoregressive Distributed Lag (CS-ARDL) model and the Dynamic Common Correlated Effects Mean Group (DCCEMG) estimator, the study addresses data challenges such as cross-sectional dependence and slope heterogeneity. The results provide important insights into the dynamics of environmental quality in relation to economic and urban growth and the role of environmental taxation. The study proposes tailored policy strategies aimed at strengthening sustainable development initiatives in line with international agreements such as the Paris Agreement and the Sustainable Development Goals. These strategies advocate for a nuanced application of environmental taxes and the promotion of productive capacities to enhance environmental sustainability across the African continent.

This study inscribes itself in the global discussion on the nurturing of pro-environmental behaviors among young people for a sustainable future. Here we focus on students' interest in Ecosystem Services and Sustainability to explain their awareness and optimism about the environmental issues of air pollution, water shortage and green gas emission in 50 countries around the world. To this end, we use the cross-sectional survey data of the OECD's Program for International Student Assessment (PISA) 2015, along with seemingly unrelated bi-variate weighted ordered Probit modeling with country specific effects. The results show that in addition to factors such as age, gender, immigration status, and economic, social and cultural status, interest in the biosphere is a significant determinant of students' environmental awareness and optimism. In fact, a one level increase in students' interest in ecosystem services and sustainability raises on average their awareness level by 15.3% for the issue of air pollution, 15.7% for the issue of water shortage, and 24.6% for the issue of green gas emission. Although students' interest in the biosphere seems to not have a significant effect on their expectations about the issue of green gas emission, it does however raise their level of optimism by 0.8% for the issue of air pollution, and 0.2% for the issue of water shortage. Furthermore, every one level increase in students' environmental awareness leads to 17.3% more optimism about the issue of air pollution, 15.8% more optimism about the issue of water shortage, and 17.4% more optimism about the issue of green gas emission. Therefore, relying on the Theory of Planned Behavior (TPB), our results imply that governments and policy makers can successfully leverage young people interests in the biosphere to effectively achieve their goals for sustainability.

Risk management for technological hazards mainly focuses on the consequences on human lives. Although technological risk analysis evaluates environmental vulnerability, it does not reflect the consequences on environmentally exposed elements, such as rivers, water springs, flora, and fauna. This paper's objective was to propose a conceptual framework and create a multidisciplinary evaluation model for environmental risk analysis in the oil and gas industry. Initially, the problem was approached from a global perspective to justify the necessity of a holistic environmental risk analysis methodology in the oil industry, using environmental risk factors as well as underlying factors, such as environmental fragility and lack of resilience. The holistic assessment was carried out based on probabilistic risk analysis methodologies to obtain a holistic environmental risk index, HERI. This methodology was applied to an oil and gas industry company in Colombia. This allowed greater disaggregation of the results to establish priorities for risk reduction actions and identify the company's weaknesses.