Background Critical patients with novel coronavirus pneumonia ( COVID-19) have worse outcome and high mortality. However, the histopathology of critical patient with COVID-19 remains undisclosed. Methods We performed the whole lung biopsy, and described the pathological changes of critical COVID-19 patient done with transplant by HE staining, immunohistochemistry and special staining observed under the microscopy. Findings The whole lungs displayed diffuse congestive appearance and partly haemorrhagic necrosis on gross examination. The haemorrhagic necrosis was prominently present in outer edge of the right lower lung. The cut surfaces of the lung displayed severe congestive and haemorrhagic changes. The main pathological changes showed massive pulmonary interstitial fibrosis, and partly hyaline degeneration, variable degrees of hemorrhagic pulmonary infarction. Small vessels hyperplasia, vessel wall thickening, lumen stenosis, occlusion and microthrombosis formation. Focal monocytes, lymphocytes and plasma cells infiltrating into pulmonary interstitium. Bronchiolitis and alveolitis with proliferation, atrophy, desquamation and squamous metaplasia of epithelial cells. Atrophy, vacuolar degeneration, proliferation, desquamation and squamous metaplasia in alveolar epithelial cells. Alveolar cavity congestion was prominent, and contained mucus, edema fluid, desquamated epithelial cells, and inflammatory cells. We also found several multinucleate giant cells and intracytoplasmic viral inclusion bodies. Special stains including Masson stain, sirius red staining, reticular fibers staining indicated massive pulmonary interstitial fibrosis. Immunohistochemistry showed positive for immunity cells including CD3, CD4, CD8, CD20, CD79a, CD5, CD38 and CD68. Interpretation We demonstrate the pathological findings of critical patient with COVID-19, which might provide a deep insight of the pathogenesis and severity of this disease.

The storage of biochemical information, which is a prerequisite for the development of the first cell, is an unsolved problem affecting all concepts of the origin of life. However, if the protected environment in the continental crust is taken into account, completely new possibilities emerge for identifying processes that may have been crucial for the formation of the first cell. Under this background, we can hypothesize that cellular life began, with a self-sustaining cycle of molecular reaction steps and information storage of peptide sequences in RNA in a crustal depth of approximately 1000 m. This cycle was made possible in an open system bound to gas-permeable tectonic fracture zones with a high proportion of CO₂ and/or N₂. It can be assumed that a large number of RNA-like molecular strands formed in the crustal environment, from which a special RNA was selected by flotation processes, which formed the basis of a proto-tRNA. The formation of peptides and vesicles in supercritical CO₂ and the chemical evolution of peptides have already been proven at conditions of the upper continental crust. The behavior of individual amino acids in connection with vesicle formation deserves special interest. Hydrophobic amino acids accumulate in the vesicle membrane, with their position in the membrane depending on the degree of hydrophobicity. Selection of a proto-tRNA with an acceptor arm ending with the bases CCA resulted in a distinctive property. The position of adenine at the tip of the acceptor arm permitted it to penetrate the membrane, allowing it to be linked to an amino acid at the 3'-OH position of the terminal ribose. The penetration depth was controlled by the hydrophobicity of the opposite anti-codon, with adenine always occupying the middle position for the hydrothermally formed hydrophobic amino acids. When the vesicle membrane was closely occupied by proto-tRNAs, the anti-codons acted as templates and stored the sequence of the peptides that form. In the cases of hydrophilic anti-codons, the acceptor arm does not reach far enough into the membrane. This allowed hydrophilic amino acids to be linked to 2´-OH.

Critical realism emerged from the philosophical writings of Roy Bhaskar, and has evolved into a philosophy of social science research using the model of “dialectical critical realism” (DCR) which begins with the researcher’s assumptions that the structures being researched have a real, ontological grounding which is independent of the researcher. This approach has proved fruitful in British and European social science research, but has had less influence in North America. We outline DCR’s four level model for understanding society and its changing social structures through “the pulse of freedom”. DCR has been used by Marxists, Muslims, Catholics and secular scholars who engage fruitfully in morphogenic dialogues leading to a critical realist understanding of society and social research, which transcends positivist and social constructionist models. Examples of DCR’s application in the fields of childhood research, child abuse, education, and research on organisations are outlined to illustrate the working of this new research paradigm. We are enthusiastic in our advocacy of DCR as a model of qualitative research, and for constructing models of positive social change, and are particularly impressed by the substantive and theoretical expositions of DCR by Priscilla Anderson, Matthew Wilkinson and Margaret Archer, whose work we document and review.

The umbrella concept for the current efforts to digitize construction is known as Construction 4.0. One of its key concepts is cyber-physical systems. The construction industry is not only creating increasingly valuable digital assets (in addition to physical ones) but also the buildings and built infrastructures are increasingly monitored and controlled using digital technology. Both make construction a vulnerable target of cyber-attacks. While the damage to digital assets, such as designs and cost calculations, may result in economic damage, attacks on digitally-controlled physical assets may damage the well-being of occupants and, in worst-case scenarios, even damage (or death) to the users. The problem is amplified by the emerging cyber-physical nature of the systems, where the human checks may be left out. We propose that construction learns from the work done in the context of critical infrastructures (CI). First, a lot of CI is construction-related, and the process of designing and building it must be secured accordingly. Second, while most assets may not be critical in the CI sense, they are critical to the operations of a business and the lives of citizens. In the end, we recommend some steps so that well-established processes of critical infrastructure protection trickle down to make Construction 4.0 and the built environment more cyber-secure. With that in mind, we describe the possible inclusion of Construction 4.0 considerations into existing critical infrastructure protection (CIP) frameworks with minimum frictions. We also propose some suggestions regarding possible future courses of action to improve the increasingly vulnerable cyber-security environment of the built environment across all life cycle phases - design, construction, operation, maintenance, and end of life.

Euler’s product formula over the primes and Euler’s zeta function equate to enshrine the Fundamental Theorem of Arithmetic that every integer > 1 is the product of a unique set of primes. The product formula has no zero, and with a domain ≤1 Euler’s zeta diverges. Dirichlet’s eta function η(s), negates alternate terms of zeta, permitting convergence when s∈C and Re(s) < 1, and its non-trivial zeros {ρ}, have a deep relationship with the distribution of the primes. The Riemann Hypothesis is that all the non-trivial zeros have Re(ρ) = 1/2. This work examines the symmetries in a partial Euler’s zeta series with a complex domain equating it to the difference between two finite vector series whose matched terms have mirror-image arguments, but whose magnitudes differ when Re(s) ≠ 1/2. Analytical continuation generates a modified eta series η_l(s), in which every l^th term is multiplied by (1-l). If the integer l is appropriately determined by the Im(s), similar paired finite vector series have a difference that closely follows η_l (s) and their terminal vectors intersect in a unique way permitting zeros only when Re(s) = 1/2. Furthermore, those vectors tracking the derivatives of the series, have a special relationship permitting zeros of the differential only when Re(s) > 1/2.

This review of current research into at-risk programs serves to categorise and characterise existing programs and to evaluate the contribution of these programs to assisting students at-risk from marginalised backgrounds. This characterisation questions the (sometimes) implicit assumptions and the consequences of those assumptions inherent in and behind these various accounts. This involves a synthesis and reformulation, based on epistemological standpoints, both explicit and implied, of the various researchers. Using as a lens the (various and varied) understandings of social justice and the goals of education (Gale & Densmore, 2000; 2003) I identify three sometimes overlapping and sometimes contesting standpoints in relation to at-risk students, characterised as instrumentalist or rational technical, social constructivist or individualist and critical transformative or empowering. I argue that programs ‘which simply seek to achieve change in the individual young people are doomed to failure’ (Stewart, 1998, 4) and that a critical transformative understanding of at-risk may deliver improved outcomes for young people by challenging ‘the school context in which the young people are located’ (Stewart, 1998, 4).

The study aims to provide technical information on the development and application of hazard analysis and critical control points (HACCP) in one of Dhaka's popular baking (cake) industries. A generic HACCP plan in accordance with legal requirements was created after a detailed analysis of data collected from the company. Every step of the production was examined for biological, chemical, and physical hazards. The prerequisite program was designed to address some hazards prior to production, thereby simplifying the HACCP plan. The critical control points were determined by answering the questions in the decision trees. Finally, the HACCP control chart was created to include critical limits, monitoring, and corrective action as components of several HACCP principles. One critical control point (CCP) and two operational pre-requisite programs (oPRPs) were identified throughout the manufacturing process.

In this paper, we study the semilinear pseudo-parabolic equations $\displaystyle u_{t} - \triangle_{\mathbb{B}}u - \triangle_{\mathbb{B}}u_{t} = \left|u\right|^{p-1}u$ on a manifold with conical singularity, where $\triangle _{\mathbb{B}}$ is Fuchsian type Laplace operator investigated with totally characteristic degeneracy on the boundary $x_{1} = 0$. Firstly, we discuss the invariant sets and the vacuum isolating behavior of solutions with the help of a family of potential wells. Then, we derive a threshold result of existence and nonexistence of global weak solution: for the low initial energy $J(u_{0})<d$, the solution is global in time with $I(u_{0}) >0$ or $\displaystyle\Vert \nabla_{\mathbb{B}}u_{0}\Vert_{L_{2}^{\frac{n}{2}}(\mathbb{B})} = 0$ and blows up in finite time with $I(u_{0}) < 0$; for the critical initial energy $J(u_{0}) = d$, the solution is global in time with $I(u_{0}) \geq0$ and blows up in finite time with $I(u_{0}) < 0$. The decay estimate of the energy functional for the global solution and the estimates of the lifespan of local solution are also given.

The overarching purpose of this review was to highlight the utility of different aerobic field tests in terms of the parameters they provide, with a specific focus on shuttle running and all-out testing. Various field tests are discussed in detail and are categorised according to linear continuous running tests (e.g. 12-minute Cooper Test, University of Montreal Track Test [UMTT], 1200/1600 m time trials, 3-minute all-out test for running [3MT]), intermittent shuttle running tests (e.g. yo-yo inter-mittent recovery test level 1 [YYIR1], 30-15 intermittent fitness test [IFT], and the intermittent all-out shuttle test [IAOST]), and continuous shuttle running tests (e.g. 1.2 km shuttle run test [1.2SRT], maximal multi-stage 20-m shuttle test [MSR], 25-m, 30 m and 50-m 3-minute all-out shuttle test [AOST]). Readers will be guided through the theoretical and practical underpinnings of the 3MT methodology, where the all-out testing methodology is stationed within the testing paradigm, and how to practically implement and interpret the results thereof.

The objective of this paper is to research the impact of electrical and physical parameters that characterize the complementary MOSFET transistors (NMOS and PMOS transistors) in the CMOS inverter for static mode of operation. In addition to this, the paper also aims at exploring the directives that are to be followed during the design phase of the CMOS inverters that enable designers to design the CMOS inverters with the best possible performance, depending on operation conditions. The CMOS inverter designed with the best possible features also enables the designing of the CMOS logic circuits with the best possible performance, according to the operation conditions and designers’ requirements.

This study describes all the properties of high T_c cuprates by introducing rotating holes that are created by angular momentum conservations on a 2D CuO₂ surface, and which have a different mass from that of a normal hole because of the magnetic field energy induced by the rotation. This new particle called a macroscopic Boson describes the doping dependences of pseudo-gap temperature and the transition temperature at which an anomaly metal phase appears and describes the origin of the pseudo-gap. Furthermore, this study introduces a new model to handle many-body interactions, which results in a new statistic equation. This statistic equation describing many-body interactions accurately explains why high T_c cuprates have significantly high critical temperatures. Moreover a partition function of macroscopic Bosons describes all the properties of anomaly metal phase, which sufficiently agree with experiments, using the result from our previous study [1] that analytically describes the doping dependence of T_c. By introducing a macroscopic Boson and the new statistical model for many-body interactions, this study uncovered the mystery of high T_c cuprates, which have been a challenge for many researchers. An important point is that, in this study, pure analytical calculations are consistently conducted, which agree with experimental data well (i.e., they do not use numerical calculations or fitting methods but use many actual physical constants).

The critical period (CP) phenomenon in language development ranks among the 125 conundrums facing scientists in the 21st century, according to Science. While the phenomenon itself has been noncontroversial in first language acquisition, it still warrants an adequate explanation. Predicated on language acquisition as a complex process, questions among the first to be raised include: How do children accomplish this remarkable feat in such a short amount of time? And how do nature and nurture come together to influence language learning? In second language acquisition, however, both the notion of CP, albeit popular, and its empirical evidence have remained contested to this date - among the questions, whether the observed evidence counts as CP-specific and/or whether or not it warrants an isomorphic attribution to maturational constraints. Entwined in this debate are two well-established facets of inter-learner differential attainment. The first is that there exists a stark difference in ultimate attainment between younger and older learners. A second facet is the vast differences in ultimate attainment among older learners. In this article, adopting a social physics approach, we mathematically establish both the relationship between nature and nurture contributions and the presence of a critical period, and, at once, tender a parsimonious and probable theory for the twin phenomena of inter-learner differential attainment.

There is limited evidence for the association between malnutrition and hospital mortality as well as Intensive Care Unit length-of-stay (ICU-LOS) in critically ill patients. We aimed to examine the aforementioned associations by conducting a prospective cohort study in an ICU of a Singapore tertiary hospital. Between August 2015 and October 2016, all adult patients with ≥24 h of ICU-LOS were included. The 7-point Subjective Global Assessment (7-point SGA) was used to determine patients’ nutritional status within 48 hours of ICU admission. Multivariate analyses were conducted in two ways: 1) presence versus absence of malnutrition, and 2) dose-dependent association for each 1-point decrease in the 7-point SGA. There were 439 patients of which 28.0% were malnourished, and 29.6% died before hospital discharge. Malnutrition was associated with an increased risk of hospital mortality [adjusted-RR 1.39 (95%CI: 1.10–1.76)], and this risk increased with a greater degree of malnutrition [adjusted-RR 1.09 (95%CI: 1.01–1.18) for each 1-point decrease in the 7-point SGA]. No significant association was found between malnutrition and ICU-LOS. Conclusion: There was a clear association between malnutrition and higher hospital mortality in critically ill patients. The association between malnutrition and ICU-LOS could not be replicated and hence requires further evaluation.

Students with disabilities are often framed as “the problem” and have limited opportunities to engage in standards based mathematics, leading to persistent underachievement. In this paper, we investigate a research divide between mathematics educational research for students with and without disabilities, a divide with significant differences in the theoretical orientations and research methodologies used to understand learners. Based on an analysis of 149 mathematics educational research articles published between 2013 and 2015, we found significant differences between articles focused on learners with and without disabilities. For those with disabilities, mathematical problem solving was understood primarily from behavioral and information processing theoretical perspectives, while for those without disabilities, problem solving was understood primarily through constructivist and sociocultural perspectives. While 86% of research on problem-solving including students with disabilities was quantitative, only 35% of research on students without disabilities was quantitative. Fifty percent of problem-solving research on students without disabilities was qualitative, compared to only 6% of research on students with disabilities. Problem solving, then, is studied in very different ways for learners with and without disabilities. Students without disabilities are studied through close analysis of learning, often individual. Students with disabilities are most often studied quantitatively, in groups, with little analysis of individual thinking. By offering only a limited range of methods and theoretical orientations, this research divide reifies deficit constructions of students with disabilities.

The mind-body problem is the central issue in both of philosophy and life science for several centuries. To date, there is still no conclusive theory to interpret the relation between the mind and the body, even just the mind alone. Here, we promote a novel model, a derived mathematic equation called the entropic system equation, to describe the innate characters of the mind and the mechanism of the mind-body coupling phenomenon. As the semi-open thermodynamic systems far from equilibrium, the living organisms could be logically considered as an entropic system. In the living organisms or the entropic systems, there also are three essential existing elements including mass, energy and information, in which the mind and the body are hypothetically coupled by free energy and entropic force.

Purpose: There is limited research on the reasons behind startup failure, and none of the available studies use a competency approach. In this study we applied Spencer’s competency model to identify the competencies in startups which, according to their CEOs, contributed to failure. Methodology: Three coders analyzed the stories of 50 startup failures published online using modified Critical Incident Technique. Findings: Two salient competencies were identified playing a fundamental role in startup failures if missing: Information seeking and Customer service orientation. A network pattern of 9 more prevalent competency deficits was created: Technical/professional/managerial expertise, Analytical thinking, Flexibility, Self-control, Concern for order, quality and accuracy, Interpersonal understanding, Self-confidence, Team leadership and Teamwork and cooperation. Besides startup-specific behavior descriptions were added to Spencer’s competencies. Research implications: Competency approach and Critical Incident Technique method proved to be feasible to identify competency deficits in failed startups. Practical implications: The identified competency deficits offer relevant focus areas for the assessment and development of startup teams. Originality: The study provided research evidence to describe the competency deficits of startup teams that are connected to their failure.

The dependence of the critical temperature $T_c$ of high-temperature superconductors of various families on their composition and structure is proposed. A clear dependence of the critical temperature of high-temperature superconductors (hydrides, Hg- and Y-based cuprates) on the serial number of the constituent elements, their valence and crystal lattice structure has been revealed. For cuprates, it is shown that it is possible to obtain even higher temperatures of superconducting transitions at normal pressure by implanting mercury atoms into the crystal lattice of cuprate.

Objectives To develop and validate a prediction model for 28-day in-hospital mortality among adult patients critically ill with COVID-19 in the UK. Design Observational cohort study. Setting 287 adult critical care units in England, Wales and Northern Ireland, of which 260 admitted at least one eligible patient. Participants 10,933 patients with confirmed COVID-19 of whom 10,401 were eligible (excluding 532 patients with a duration of critical care less than 24 hours and 1 patient with unknown 28-day outcome): 8,666 development (March-April 2020) and 1,735 temporal validation (May-August 2020). Main outcome measures 28-day in-hospital mortality from start of critical care. Results Two models were developed using 14 patient level predictors selected from 30 candidate predictors, with and without adjustment for calendar time. In the temporal validation data, the model discrimination was maintained (c index 0.78) but calibration was poor, particularly for the model not adjusted for calendar time (ratio of observed to predicted mortality 0.74 versus 0.88 for the model adjusted for calendar time). Conclusions We developed and validated a prediction model for 28-day in-hospital mortality for patients critically ill with COVID-19. Although absolute predictions were inaccurate due to changing outcomes, the models will support risk-adjustment in analyses and monitoring changes in risk-adjusted outcome over time.

Best management practices (BMPs) are a way to control pollution in river basins. Prioritization of BMPs helps improve efficiency and effectiveness of pollution reduction, especially in critical source areas (CSAs) that produce the highest pollution loads. Recently, the Dez River, Khuzestan, Iran, has become highly eutrophic from overuse of fertilizers and pesticides. Dry and irrigated farming produce 77.34% and 6.3% of the total nitrogen (TN) load, and 83.56% and 4.3% of the total phosphorus (TP) load in this basin, respectively. Residential, pasture, and forest land uses account for 16.36% of the TN and 12.14% of the TP load cumulatively. In this study, the Soil and Water Assessment Tool (SWAT) was implemented to model the Dez River basin, and evaluate the applicability of several BMPs including point source elimination, filter strips, livestock grazing, and river channel management, in reducing the entry of pollution loads to the river. Sensitivity analysis and calibration/validation of the model was performed using the SUFI-2 algorithm in the SWAT Calibration Uncertainties Program (SWAT-CUP). CSAs were identified using individual (sediment, TN, TP) and combined indices, based on the amount of pollution produced. Among the BMPs implemented, filter strips were most effective in reducing TN loads (59%), and, increasing the D₅₀ of particles for river channel management was most effective in reducing TP loads (49%).

In general, a superconductor has zero resistance, although it requires significant refrigeration or high pressures with high manufacturing costs, which prevents it into practical applications. In other words, solving these issues implies main superconducting researches. To solve these problems, this paper describes a new type of superconductivity, which is independent for temperatures and which operates without pressures. The principles of the presented system are as follows:First a voltage source, a current source and a load are connected in series. Then, the voltage of the voltage source is adjusted to balance the voltage of the load. Under this condition, the balance of the two voltages provides a zero voltage between the taps of the current source and the generated current from the voltage source becomes zero because of the internal infinite resistance of the current source. As a result, the electric powers generated by the two sources are zero, and therefore, the load cannot generate Joule heating because of energy conservation. However, the current from the current source (not the voltage source) is not zero; therefore, we can predict that the resistance of the load must be zero. As a theory, we derived a new electric field and transient attractive force, which result in a very short coherence of an electron pair because there is not the Coulomb repulsive force due to the existence of the above transient attractive force. Note that both the forces are derived by the Poisson equation, which implies that they cannot be compatible. Therefore, the pair combination energy from spins becomes extremely strong, which is not destroyed by the normal heat energy. Moreover, every center-of-mass motion of electron pair results in the Bose-Einstein condensation and the macroscopic wave function, which produces the London equation (i.e., the Meissner effect). Moreover, by introducing the equivalent circuit, this paper conducted numerical calculations. As a result, we could derive numerically zero resistance and responses for additional static magnetic fields as a discharged current, which implies the Meissner effect. Note that this paper has prepared Appendix section, which provides a guide to reproduce actual experiments and preliminary experimental results. These results in the Appendix indicate the zero resistances and Meissner effects.

In an era characterized by a move towards a “knowledge society”, universities are central in fostering “knowledgeability”, that is the reflexive understanding of knowledge in knowledge societies. The objective of “knowledgeability” can be met through creating a stronger link between education and research. Furthermore, overall student performance, for example in critical thinking and problem solving, can be improved if research-related activities are incorporated into the curriculum. The aim of this paper is to use inter-national examples to discuss the research- education nexus from four different perspectives, namely context, policy, im- plementation and quality, with case studies from higher education institutions in Singapore and Sweden. We suggest that different integrative technologies can be used to enhance the links, but it will be essential to consider the inputs of training, service and support in using new technology. Interestingly, the act of evaluating the link between edu- cation and research will increase awareness of this linkage by stakeholders involved in both education and research. In turn the link can be strengthened, contributing to increased quality in both education and research.

Part of philosophy is to subject assertions to critical scrutiny, clarifying exactly what the assertion is saying, its implications, and thus its direct plausibility. The goal is to ensure clarity, logical consistency, and rational argumentation in order to arrive at reasoned conclusions. A common problem is that arguments have missing implied premises that, unless explicitly stated, are mistakenly assumed to be true. Here we subject conclusions made regarding the SARS-CoV-2 pandemic to critical scrutiny, revealing their implied premises so that these premises can be explicitly examined and refuted. Specifically, we refute the conclusions that “no one is protected until everyone is protected” and “population lockdowns are required to protect those at high risk of adverse outcomes.” In the end, we argue for the conclusion that “an Emergency Management principles based response to the pandemic, compared to population-wide lockdowns, offers a way to prevent more adverse outcomes from COVID-19, better prevent overwhelmed healthcare, and prevent most of the collateral damage to the wellbeing of the population that has resulted from the lockdowns.”

To clarify the relationships among critical temperature, critical magnetic field, and critical current density, this paper describes many-body interactions of quantum magnetic fluxes (i.e., vortices) and calculates pinning-related critical current density. All calculations are analytically derived, without numerical or fitting methods. Afteralculating a magnetic flux quantum mass, we theoretically obtain the critical temperature in a many-body interaction scenario (which can be handled by our established method). We also derive the critical magnetic field and inherent critical current density at each critical temperature. Finally, we determine the pinning-related critical current density with self-fields. The relationships between the critical magnetic field and critical temperature, inherent critical current density and critical temperature, and pinning critical current density and temperature were consistent with experimental observations. From the critical current density and critical magnetic field, we clarified the magnetic field transition. It appears that a magnetic flux quantum collapses when the lattice of magnetic flux quanta melts. Our results, combined with our previously published papers, provide a comprehensive understanding of the transition points in high-T_c cuprates.

This paper studied the nonlinear vibrations of top tensioned cantilevered pipes conveying pressurized steady two-phase flow under thermal loading. The coupled axial and transverse governing partial differential equations of motion of the system were derived based on Hamilton’s mechanics with the centreline assumed to be extensible. Multiple scale perturbation method was used to resolve the governing equations, which resulted to an analytical approach for assessing the natural frequency, mode shape and the nonlinear coupled axial and transverse steady state response of the pipe. The analytical assessment reveals that at some frequencies the system is uncoupled, while at some frequencies a 1:2 coupling exists between the axial and the transverse frequencies of the pipe. Nonlinear frequencies versus the amplitude displacement of the cantilever pipe conveying two-phase flow at super critical mixture velocity for the uncoupled scenario exhibit a nonlinear hardening behaviour, an increment in the void fractions of the two-phase flow resulted to a reduction in the pipe’s transverse vibration frequencies and the coupled amplitude of the system. However, increasing the temperature difference, pressure and the presence of top tension were observed to increase the pipe’s transverse vibration frequencies without a significant change in the coupled amplitude of the system.

A low-cost data logging platform is presented for environmental monitoring projects that provides long-term operation in remote or submerged environments. Three premade “breakout boards” from the open-source Arduino ecosystem are assembled into the core of the platform. The components are selected based on low-cost and ready availability, making the loggers easy to build and modify without specialized tools, or a significant background in electronics. Power optimization techniques are explained. The platform has proven to be highly reliable, and capable of operating for more than a year on standard AA batteries. The flexibility of the system is illustrated with two ongoing field studies recording drip rates in a cave, and water flow in a flooded cave system.

The aim was to evaluate levels of compassion fatigue in nursing professionals working in complex care units of a Brazilian university hospital. A cross-sectional, descriptive, and correlational study was carried out with nursing workers from complex care units of a University Hospital. Data were collected in the second half of 2019, in the pre-pandemic period of COVID-19, using the Brazilian version of the Professional Quality of Life Scale (ProQoL-BR). A total of 146 individuals partici-pated, including 41 (28.1%) nurses, 92 (63.0%) nursing technicians and 13 (8.9%) nursing assis-tants. It was observed that 26.1% presented high level of compassion satisfaction. For 17.5% there was level of burnout and 49.7%, medium level of burnout; and 22.0% with high and 46.1% with medium level of secondary traumatic stress. Twenty-eight (19.2%) professionals had compassion fatigue, of which 16 (57.1%) were nursing technicians. There is a high percentage of professionals with medium and high rates of burnout and secondary traumatic stress, a fact that is reinforced by the presence of compassion fatigue in almost one fifth of the studied individuals. These results highlights how much the health of these workers can be affected by living with traumatic patient experiences.

Objectives: The purpose of this systematic review was to ascertain critical care nurses’ understanding and experiences of patient advocacy in adult critical care settings. The specific objectives were to identify how critical care nurses define patient advocacy, to explore the understanding and experiences of critical care nurses regarding patient advocacy, to explore critical care nurses’ role in patient advocacy, and to ascertain the barriers to encouraging advocacy in the critical care setting. Research design: Systematic literature search of CINAHL and Medline databases, Google Scholar, and Cochrane Database of Systematic Reviews, as well as grey literature search, was conducted. Search dates were restricted from January 2005 to 2015 in both CINAHL and Medline. Findings: 62 studies were identified, of which 6 qualitative research papers were included. Nurses gave varied definitions of patient advocacy, which were categorized into three themes: communication, protection, and doing. Nurses perceive advocacy as truly listening to patients and their families. Conclusion: For critical care nurses to be effective advocates, there must be support, collaboration, and improved working relationship between professional groups. Moreover, nurses must be empowered to be able to give power to patients and family.

This paper presents a study conducted to identify, assess, rank, and compare the most influencing factors causing schedule delay during construction phase of petrochemical projects in Saudi Arabia. The methodology followed in this research to achieve the main aims is a combination of comprehensive review of the literature and interviewing number of local experts, which have resulted in identifying of 23 factors. Through a web-based questionnaire survey, the identified factors were ranked. Total of 90 completed responses were gathered from 106 received responses. The completed responses gathered from 38 contractors and 52 owners. Of 90 participants, there are 32 project managers, 22 project engineers, 7 construction supervisors and the other 31 having different positions in projects departments The study has found that the most influencing factors causing schedule delay during construction in petrochemical projects in Saudi Arabia are “Poor site management and supervision by contractors”; “Conflict between main contractor and subcontractor”; “poor planning and scheduling of projects by contractor”; “Delay of material or equipment delivery”; and followed by “Delay in Handing Over Construction Site to Contractor”. This paper is original in the sense that the areas of knowledge and practice covered in the identified factors were distributed and not available in one source. The factors are derived from personal interviews with selected project managers, project engineers, construction supervisors and the others from different positions in project department and from the relevant literature.

The intensive care units in North West London are part of one of the oldest critical carenetworks in the UK, forming a mature and established strategic alliance to shareresources, experience and knowledge for the benefit of its patients. North WestLondon saw an early surge in COVID-19 admissions, which urgently threatened thecapacity of some of its intensive care units even before the UK government announcedlockdown. The pre-existing relationships and culture within the network allowed itsmembers to unite and work rapidly to develop agile and innovative solutions, protectingany individual unit from becoming overwhelmed, and ultimately protecting its patients.Within a short 50-day period 223 patients were transferred within the network todistribute pressures. This unprecedented number of critical care transfers, combinedwith the creation of extra capacity and new pathways, allowed the region to continue tooffer timely and unrationed access to critical care for all patients who would benefitfrom admission. This extraordinary response is a testament to the power and benefitsof a regionally networked approach to critical care, and the lessons learned maybenefit other healthcare providers, managers and policy makers, especially in regionscurrently facing new outbreaks of COVID-19.

Recently, it was reported that the physical cross-linking exhibited by some biopolymers could provide multiple benefits to biomedical applications. In particular, grafting thermoresponsive polymers onto biopolymers may enhance the degradability or offer other features, as ther-mothickening behavior. Thus, different interactions will affect the different hydrogen bonds and interactions from the physical cross-linking of CMC, the lower critical solution temperatures (LCSTs), and the presence of the ions. This work focuses on the study of blends composed of poly(N-isopropylacrylamide), poly(N-ethylacrylamide), and carboxymethyl cellulose in water and water/methanol. The molecular features, the thermoresponsive behavior, and gelation phenomena are deeply studied. The ratio defined by both homopolymers will alter the final properties and the gelation of the final structures, showing that the presence of the hydrophilic groups modifies the number and contributions of the diverse hydrogen bonds.

This review critically assesses the body of research about Measles-Mumps-and-Rubella (MMR) vaccine attitudes and uptake in the United Kingdom (UK) over the past 10 years. We searched PubMed and Scopus, with terms aimed at capturing relevant literature on attitudes, uptake, decision-making, and beliefs about the MMR vaccine. Two researchers screened for abstract eligibility and after de-duplication 934 studies were selected. After screening, 40 references were included for full-text review and thematic synthesis by three researchers. We were interested in the methodologies employed, and grouped findings by whether studies concerned: (1) Uptake and Demographics; (2) Beliefs and Attitudes; (3) Healthcare Worker Focus; (4) Experimental and Psychometric Intervention; (5) Mixed Methods. We identified group and individual level determinants for attitudes, operating directly and indirectly, that influence vaccine uptake. We found that access issues, often ignored within the public “anti-vax” debate, remain highly pertinent. Finally, a consistent theme was the effect of misinformation and lack of knowledge or trust in healthcare, often stemming from the Wakefield controversy. Future COVID-19 immunisation campaigns for children should consider both access and attitudinal aspects of vaccination, and incorporate a range of methodologies to assess progress, taking into account socio-economic variables and the needs of disadvantaged groups.

Transformation studies have been leaning towards the more practical aspects of change processes and have not yet dealt sufficiently with their personal and political dimensions. They are arguably constrained in doing so if they are either overly focussed on systems and how to control them or on individualistic values and behaviours. In this study we show how the actually-occurring societal transformations that people face can be usefully approached through the lenses of dialogical sense-making and critical phenomenology. While distinct, these approaches share a concern with aspects missed when transformation is abstracted and alienated from people’s lives; namely people’s lived experiences during times of change, and the conditions of possibility for these experiences. Dialogical sense-making explores how people create meaning around transformations, through interactions with other people, with different lines of arguments, and as part of broader public discourse. Critical phenomenology engages with subjectivity and lived experience, and with the role of foundational as well as socio-culturally dominant yet contingent structures in shaping our ways of perceiving, experiencing and knowing the world. Through a discussion of insights from these approaches, we show how they offer tools that enable new questions about transformative change as it is experienced and made sense of. Situating analyses of tranformation from within a focus on experience brings us closer to understanding the significance of change processes in people’s lives, and allows for an inquiry into the conditions of experience, including transformative experiences.

Today project management in every field of life is prerequisite for the success of project by increasing quality reduces cost and schedule. But selecting tools and techniques to achieve our objectives and implement our plan fully is very difficult task because choice creates complexity. So, we discuss AHP to make decision simple. Ranking critical success factor, cloud computing services, risk prioritization, selection of right ETL software and many other systems AHP plays its important role. For the improvement of today’s complex systems it is very important to prioritize and select projects to remove the root cause of the problem. To attain the right selection of construction equipment for carrying out schedule tasks with high efficiency, production and financial capability is the main purpose of procurement of construction equipment process. Certain conflicts can occur due to the construction of UML models in a collaborative way. AHP is used to remove these conflicts and for establishing and evaluating modelers judgments. Nowadays it is very important and critical decision to choose the best option from multiple alternatives for a successful career after passing 12th standard and also it affects our future. “AHP and TOPSIS” methods are used for this purpose. In this paper, an “AHP and Fuzzy AHP” based hierarchical trust model has been used to rate the service providers and their various plans for infrastructure as a service.

Surface area and pore size distribution of Eucalyptus samples pretreated by different methods were determined by the Brunauer-Emmett-Teller (BET) technique. Three methods were applied to prepare cellulosic biomass samples for BET measurements: air, freeze, and critical point drying (CPD). Air and freeze drying caused severe collapse of biomass pore structures, but CPD effectively preserved biomass morphology. Surface area of CPD prepared Eucalyptus samples was determined to be 58–161 m2/g, whereas air and freeze dried samples were 0.5–1.3 and 1.0–2.4 m2/g, respectively. Average pore diameter of CPD prepared Eucalyptus samples were 61–70Å. CPD preserved Eucalyptus sample morphology by replacing water with a non-polar solvent, CO2 fluid, which prevented hydrogen bond reformation in the cellulose.

Most traditional theories of intelligence have little to do with the question of whether people with high intelligence can successfully address real world problems. A high IQ is correlated with many important outcomes (e.g., academic prominence, reduced crime), but it does not protect against cognitive biases, partisan thinking, reactance, confirmation bias, and even falling for discredited beliefs such as alchemy, cold fusion, and astrology. There are several newer theories that directly address the question about solving real-world problems. Prominent among them is Sternberg’s adaptive intelligence with “adaptation to the environment” as the central premise, a construct that does not exist on standardized IQ tests (e.g., Sternberg, 2019). Similarly, Stanovich and West (2014) argue that standardized tests of intelligence are not measures of rational thought—the sort of skill/ability that would be needed to address complex real-world problems. Halpern and Butler (2020) advocate for critical thinking as a better model of intelligence for addressing real-world problems than those that are based on psychometric properties of general intelligence. Yes, intelligence (i.e., critical thinking) can be enhanced and used for solving a real-world problem like Covid-19, which we use as an example of contemporary problems that need a new approach. Critical thinking may be an antidote for the chaos of the modern world.

Recently, several research groups have reported on anomalous enhancement of the self-field critical currents, Ic(sf,T), at low temperatures in superconductor/Dirac-cone material/superconductor (S/DCM/S) junctions. Some papers attributed the enhancement to the low-energy Andreev bound states arising from winding of the electronic wave function around DCM. In this paper, Ic(sf,T) in S/DCM/S junctions have been analyzed by two approaches: modified Ambegaokar-Baratoff and ballistic Titov-Beenakker models. It is shown that the ballistic model is an inadequate tool to analyze experimental data from S/DCM/S junctions. The primary mechanism for limiting superconducting current in S/DCM/S junctions is different from the conventional view that the latter is the maximum value within the order parameter phase variation. Thus, there is a need to develop a new model for self-field critical currents in S/DCM/S systems.

The paper aims in assessing risks of mandible fractures consequent to impacts or sport accidents. The role of the structural stiffness of mandible, related to disocclusion state, is evaluated through numerical simulations using the finite element method (FEM). It has been assumed that the quasi-static stress field, due to distributed forces developed during accidents, could explain the common types of mandibular fractures. Geometric model of adolescent mandible was built, upon the basis of medical imaging, in CAD software with distinction between cortical layer and inner spongy bone. The finite element model of disoccluded mandible was next created. Mandibular condyles were supposed jammed in the maxillary fossae. The total force of 700 N, simulating an impact on mandible, has been sequentially applied in three distinct areas: centrally, at canine zone and at the mandibular angle. Clinically most frequent fractures of mandible were recognized through the analysis of maximal principal stress and maximal principal strain fields. Mandibular fracture during accidents can be analyzed at satisfactory level using linear quasi-static FE models for designing protections in sport and transport. The proposed approach can be improved by introducing more realistic interactions between condylar processes and fossae.

The era of globalization of the industrial revolution 4.0 was also marked by rapid economic, social, scientific, and technological developments. Currently, the company was demanded to maximize all its potential to compete with other companies. For this reason, it was hoped that companies could understand the importance of knowledge management-based intellectual capital through outreach, externalization, internalization, and combinations that had implications for improving employee performance and competency. This study was to identify and describe the enhancement of performance and competency-based on the optimization of the intellectual capital model in terms of critical thinking analysis. This study used a qualitative approach with critical thinking analysis through literature study methods. The findings results of this study were to improve performance and competency were the basic measurement models of intellectual capital, new intellectual capital measurement models in empirical studies, intellectual capital measurement models with bottlenecks, and environmental-based intellectual capital models. This study concluded that intellectual capital measurement should be determined as accumulation and interpretation in the proposed model for a company that was an applied subject with a qualitative intellectual capital index system, to provide a good tool for companies to managed intellectual capital.

Despite the development of technologies, modern methods of disposal of end-of-life tires most often represent either the incineration in cement kilns or the destruction of tires in special landfills, showing a lack of sustainable recycling of this valuable material. The fundamental role of recycling is evident, and the development of high-efficiency processes represents a priority for the European market. Therefore, investigation of end-of-life rubber processing methods is of high importance for manufacturers and recyclers of rubber materials. In this paper, methods of processing of end-of-life tires are reviewed in order to obtain rubber crumb, which can later be used in the production of new industrial rubber goods and composite The processes of separation end-of-life tire into fractions by type of materials using mechanical processing methods along with mechanochemical and mechanical processes of processing the materials of used tires in order to obtain crumb rubber of various fractions and chemical reactivity are considered.

Self-organized criticality (SOC) is a celebrated paradigm from the 90’s for understanding dynamical systems naturally driven to its critical point, where the power-law dynamics taking place make predictions practically impossible, such as in stock prices, earthquakes, pandemics and many other problems in science related to phase transitions. Shortly thereafter, it was realized that traffic flow might be in the SOC category, implying that conventional traffic management strategies seeking to maximize the local flows can become detrimental. This paper shows that the Kinematic Wave model with triangular fundamental diagram, and many other related traffic models, indeed exhibit SOC, thanks in part to the fractal nature of traffic exposed here on the one hand, and our need to get to our destinations as soon as possible, on the other hand. Important implications for congestion management of traffic near the critical region are discussed, such as: (i) Jam sizes obey a power-law distribution with exponent 1/2, implying that both its mean and variance become ill-defined and therefore impossible to estimate. (ii) Traffic in the critical region is chaotic in the sense that predictions becomes extremely sensitive to initial conditions. (iii) However, aggregate measures of performance such as delays and average speeds are not heavy tailed, and can be characterized exactly by different scalings of the Airy distribution, (iv) Traffic state time-space “heat maps” are self-affine fractals where the basic unit is a triangle, in the shape of the fundamental diagram, containing 3 traffic states: voids, capacity and jams. This fractal nature of traffic flow calls for analysis methods currently not used in our field.

Worldwide, one of the main causes of death among young adults is multiple trauma. In these pa-tients hemorrhagic shock represents the leading cause for worsening of the clinical status and for increased morbidity and mortality. This is due to a multifactorial complex involving cellular, bi-ological, and biophysical mechanisms. The most important mechanisms affecting clinical out-come are oxidative stress, the augmentation of pro-inflammatory status, immune deficiency, dis-ruptions in the coagulation cascade, imbalances in electrolyte and acid-base homeostasis. Poly-trauma patients in hemorrhagic shock need adequate fluid management to ensure hemodynamic stability that must consider not only the maintenance of adequate blood pressure, but also the ad-equate oxygenation of tissues for optimal cellular function. In the current clinical practice, fluid resuscitation in polytrauma patients uses a variety of widely studied pharmacological products, such as crystalloids, colloids, blood transfusions, and the infusion of other blood products. Alt-hough these products exist, an agreement was not reached on a standard administration protocol that could be generally applied for all patients. Moreover, numerous studies have reported a se-ries of adverse events related to fluid resuscitation and to the inadequate use of these products. This review aims at describing the impact the administration of all the solutions used in fluid re-suscitation might have on the cellular and pathophysiological mechanisms in the case of poly-trauma patients suffering from hemorrhagic shock.

History learning is often regarded as something that is considered unimportant and boring to be taught in the modern era like now. The existence of history learning itself is still important enough to be studied in the 21st century with all its benefits and uses. One of the uses of history is as a reasoning education. The research questions are how do we take advantage of history learning as reasoning and critical thinking education in the 21st century and how the usage of new media can make historical learning looks more interesting. The method used in this article is literature review with data obtained and analyzed from several journals and research results related to history learning and reasoning education, especially forms of critical thinking in the 21st century. From the results of the research, it was found that there was a link between learning history and its relation as a form of critical thinking in the 21st century, in several ways, such as teaching history based on historical thinking, and the usage of new media in history learning.

In the current scenario of changing climatic conditions and rising global population, there is always a need to explore novel, efficient, and economical natural products for the benefit of human kind. Biosurfactant is one of the latest explored microbial biomolecules that have been used in numerous fields, including agriculture, pharmaceuticals, cosmetics, food processing, and environment-cleaning industries as raw material, lubrication, wetting, foaming softening, making emulsions, and stabilizing dispersions. The amphiphilic nature of biosurfactant biomolecules showed great advantage, distributing themselves into two immiscible surfaces by reducing interfacial surface tension and increasing the solubility of hydrophobic compounds. Furthermore, their eco-friendly nature, low or even no toxic nature, durability at higher temperatures, and wide range of pH fluctuations making the microbial surfactants preferable compared to their chemical counterparts. Additionally, the biosurfactants can obviate the oxidation flow by eliciting the antioxidant property, antimicrobial, anticancer activity, and drug delivery system, further broadening their applicability in the food, pharmaceutical, and pharma industries. Nowadays, biosurfactant has been broadly utilized to improve the soil quality by improving the concentration of trace elements and mixed with pesticides or applied singly on the plant surfaces for plant disease management. In the present review, we summarise the latest aspect of microbial synthesized biosurfactant compounds, limiting factors of biosurfactant production, and their application in improving soil quality, plant disease management.

Tissue engineering and regenerative medicine has gradually evolved as a promising therapeutic strategy to the modern healthcare of the aging and diseased population. In this study, we developed a novel nano-fibrous scaffold and verified its application in the critical bone defect regeneration. The metformin-incorporated nano-gelatin/hydroxyapatite fibers (NGF) was produced by electrospinning, cross-linked, and then characterized by XRD and FTIR. Cytotoxicity, cells adhesion, cell differentiation, and quantitative osteogenic gene and protein expression were analyzed by bone marrow stem cells from rat. Rat forearm critical bone defect model was performed for the in vivo study. The nano-gelatin/hydroxyapatite fibers (NGF) were characterized by their porous structures with proper interconnectivity without significant cytotoxic effects; the adhesion of bone marrow stem cells on the nano-gelatin/hydroxyapatite fibers (NGF) could be enhanced. The osteogenic gene and protein expression were upregulated. Post implantation, the new regenerated bone in bone defect was well demonstrated in the NGF samples. We demonstrated that the metformin-incorporated nano-gelatin-hydroxyapatite fibers greatly improved healing potential on the critical sized bone defect. Although metformin-incorporated nano-gelatin/hydroxyapatite fibers had advantageous effectiveness during bone regeneration, further validation is required before it can be applied to clinical applications.

The new IoT/IoE (internet of things/everythings) paradigm and architecture permits to rethink about the way the Smart City infrastructures are designed and managed, on the other hand a number of problems have to be solved. In terms of mobility the cities that embrace the sensoring era can take advantage of this disruptive technology to improve the quality of life of their citizen, also thanks the rationalization in the use of their resources. In Sii-Mobility, a national smart city project on mobility and transportation, a flexible platform has been designed and here, in this paper, is presented. It permits to setup heterogeneous and complex scenarios that integrate sensors/actuators as IoT/IoE in an overall scenario of Big Data, Machine Learning and Data Analytics. A detailed and complex case-study has been presented to validate the solution in the context of a system that dynamically reverse the traveling direction of a road segment, with all the safety conditions in place. This case study composes several building blocks of the IoT platform, which demonstrate that a flexible and dynamic set-up is possible, supporting off-grid, security, safety, cloud and mixed solutions.

In the present work, a superlattice structure comprising superconducting and insulator layers is studied. Here, if a magnetic field is applied parallel to the layers, the lack of a pinning center leads to a novel transition; in particular, as the applied magnetic field is reduced, the stationary wave surrounding the magnetic flux quantum in the superconducting layer eventually collides with the superconducting–insulating interfaces on both sides because its radius becomes larger than the width of the superconducting layer. At this instant, the stationary wave will collapse, and a transition will occur: the magnetic quanta are collapsed and thus the uniform magnetic field distribution is achieved, which corresponds to the transition from the superconducting state to the normal state over critical current. Considering a one-dimensional model of the structure, a critical current density equation is derived that indicates an increase in the critical current density for increased applied magnetic field. Subsequently, the same calculation was conducted after changing the direction of the magnetic field component, and the combination of these two calculations expresses the anisotropic property of the structure. The phenomenon is also predicted for anisotropic critical current density. This phenomenon is an important discovery that helps manufacture high-temperature superconducting tape as well as large high-temperature superconducting coils.

innate and adaptive immune responses lead to wound healing by regulating a complex series of events promoting cellular cross-talk. An inflammatory response is presented with its characteristic clinical symptoms: heat, pain, redness, and swelling. Some smart thermo-responsive polymers like chitosan can be used to create biocompatible and biodegradable scaffolds with 3D architectures similar to human structures, allowing their efficient and safe use as tissue engineering and drug delivery systems in chronic wounds. Locally heated tumors above polymer lower critical solution temperature can induce its conversion into a hydrophobic form, enhancing drug release until the thermal stimulus is gone, where a lower release is due to the swelling of the material. This paper integrates the relevant reported contributions of bioengineered scaffolds for thermo-responsive drug delivery in wound healing. Therefore, we present a comprehensive review that aims to demonstrate the capacity of these systems to provide spatially and temporally controlled release strategies for one or more drugs used in wound healing. In this sense, the novel manufacturing techniques of 3D-printing and electrospinning are explored for the tuning of their physicochemical properties to adjust therapies according to the patient’s convenience, as well as reduce drug toxicity and side effects.

Background: It is necessary to apply a behavior-based safety (BBS) program to prevent at-risk behavior. An effective BBS program requires the implementation of not only behavioral definitions and a customized critical behavior checklist (CBC) but also observations of behavior, coupled with customized interventions at power plants. Method: In this study, a customized CBC and behavioral definition were developed through a review of five different sites that previously used a CBC. The rules of observation, flow, and target were established to initiate the observations. Customized interventions were selected to increase safe behaviors. CBC scoring was used to evaluate observed safe behaviors for three years. Recognized safe behaviors were evaluated with a questionnaire that included four items each for conformity and participation behaviors and were then analyzed through a factor analysis and a t-test. The questionnaires were conducted three months before and after the implementation of the BBS program. Results: The customized CBC, behavioral definition, and interventions were effective, such that observed safe behaviors and the levels of workers’ recognized safe behaviors increased. Conclusion: The application of the BBS program was found to increase the observed and recognized safe behaviors. Therefore, the program applied to this site can help increase safe behaviors at other identical or similar sites, as well as prevent an accident, which also corresponds with the results of prior studies.

Sepsis, a syndrome characterized by systemic inflammation during infection, continues to be one of the most common causes of patient mortality in hospitals across the United States. While standardized treatment protocols have been implemented, wide variability in clinical outcomes persist across racial groups. Specifically, Black and Hispanic populations are frequently associated with higher rates of morbidity and mortality in sepsis compared to the Caucasian population. While this is often attributed to systemic bias against minority groups, a growing body of literature has found patient, community, and hospital-based factors to be driving racial differences. In this article, we provide a focused review on some of the factors driving racial disparities in sepsis. We also suggest potential interventions aimed at reducing health disparities in the prevention, early identification, and clinical management of sepsis.

Background: The financial austerity policy imposed to Portugal by Troika - the European Commission, European Central Bank and International Monetary Fund in 2011, led to a tremendously social crisis. Under these dominant trends in Europe, which were felt especially in certain countries, such as Portugal, we feel ourselves forced into an analysis and reflection on the impact of this conjuncture in social workers, especially analyzing the role played by social workers and its critical consciousness relative to this neoliberal model and imposed austerity policies. Methods: This article results from an analysis of empirical data collected after the entry of Troika in Portugal, during 2013. Were conducted 26 in-depth interviews to front line social workers, with the purpose of obtaining a narrative of their daily work practice and with the concern of encouraging reflection on them. Results: Analysis shows the predominance of a maintenance role at the expense of more emancipatory approaches and thus, this results point to the relationship of this maintenance role with the sociological paradigm of social regulation and shows also, how social work is still attached to a conservative agenda. Secondly, one finds a weak critical reflection among social workers, being very afraid to speak out against the system, taking on a submissive attitude and subservient to the policies of social cuts imposed. The analysis then raises the challenge for social workers to develop a critical reflexivity Conclusion: The results highlight several important observations in terms of social woker role and that a critical activity is urgently required to social workers.

We asked whether the level of peripheral fatigue would differ when three consecutive exercise trials were completed to task failure, and whether there would be delayed recovery in maximal voluntary contraction (MVC) force, neuromuscular activation and peripheral fatigue following task failure. Ten trained sport students performed three consecutive knee extension isometric trials (T1, T2, T3) to task failure without breaks between trials. T1 and T2 consisted of repeated 5-s contractions followed by 5-s rest. In T1, contractions were performed at a target force at 60% pre-exercise MVC. In T2, all contractions were MVCs, and task failure occurred at 50% MVC. T3 was a sustained MVC performed until force fell below 15% MVC. Evoked force responses to supramaximal electrical femoral nerve stimulation were recorded to assess peripheral fatigue. Electromyography signals were normalized to M-wave amplitude to assess neuromuscular activation. Lower levels of evoked peak forces were observed at T3 compared to T2 and T1. Within 5 s of task failure in T3, MVC force and neuromuscular activation recovered substantially without any recovery in evoked peak force. Neuromuscular activation 5-10 s after T3 was unchanged from pre-exercise values, but evoked peak forces were substantially reduced. These results challenge the existence of a critical peripheral fatigue threshold that reduces neuromuscular activation. Since neuromuscular activation changed independently of any change in evoked peak force, immediate recovery in force production after exercise is due to increased central recruitment and not to peripheral mechanisms.

Sustainability is very important in business. The residential high-rise building all firms wanted to successful and sustainability in business. There is need the construction to completed low time, low cost and high quality in construction work. Therefore, real estate developers must find various strategies to use in construction projects to achieve goals and success of the firm. The purpose of this study was to indicate the very importance of knowledge management can lead to sustainability in business. Analyze 14 critical success to sustainability in residential high-rise building projects, collected questions from literature review, and survey in deep interview senior managers of 15 projects real estate development firms listed on the stock market of Thailand. Budget building more than 1000 million baht per project. From conceptual frame work five foundations integrated to knowledge management of critical success (KMITL PROCESS) used made tool survey in deep interview the critical success to sustainability in residential high-rise building project from project managers. Used IBM SPSS evaluated the critical success to sustainability. Found was one very important of critical success to sustainability, which was quality of products x̄ = 4.83. All 14 critical success to sustainability was found can applied made the knowledge management of critical success to sustainability in residential high-rise building project in firm. Especially in the field of construction managements project can used improve of all construction projects.

In this paper we present the measurement of charged pion two-particle femtoscopic correlation functions in $\sqrt{S_{NN}}$= 200 GeV Au+Au collisions, in 31 average transverse mass bins, separately for positive and negative pion pairs. Lévy-shaped source distributions yield a statistically acceptable description of the measured correlation functions, with three physical parameters: correlation strength parameter λ , Lévy index α and Lévy scale parameter R. The transverse mass dependence of these Lévy parameters is then investigated. Their physical interpretation is also discussed, and the appearance of a new scaling variable is observed.

Correlations between the air permeability coefficient and various pore structure indicators in cementitious materials were examined to determine the pore structure indicator that best evaluated air permeability using data from previous studies of air permeabilities and pore structures. The determination coefficients of air permeability with total pore volume, critical pore diameter, and ordinary threshold pore diameter were low, although these have often been used as indicators. The median and threshold pore diameters obtained by percolation theory showed high determination coefficients. The equation using the threshold pore diameter better estimated the air permeability coefficient than the Katz–Thompson equation.

The rate of technical innovation, system interconnection, and advanced communications undoubtedly boost distributed energy networks' efficiency. However, when an additional attack surface is made available, the possibility of an increase in attacks is an unavoidable result. The energy ecosystem's significant variety draws attackers with various goals, making any critical infrastructure a threat, regardless of scale. Outdated technology and other antiquated countermeasures that worked years ago cannot address the complexity of current threats. As a result, robust artificial intelligence cyber-defense solutions are more important than ever. Based on the above challenge, this paper proposes an ensemble transfer learning spiking immune system for adaptive smart grid protection. It is an innovative Artificial Immune System (AIS) that uses a swarm of Evolving Izhikevich Neural Networks (EINN) in an Ensemble architecture, which optimally integrates Transfer Learning methodologies. The effectiveness of the proposed innovative system is demonstrated experimentally in multiple complex scenarios that optimally simulate the modern energy environment. In this way, the proposed system fully automates the strategic security planning of energy networks with computational intelligence methods. It allows the complete control of the digital strategies of the potential infrastructure that frames it, thus contributing to the timely and valid decision-making during cyber-attacks.

With reference to Planck scale, increasing support for large scale cosmic anisotropy and preferred directions and by considering an increasing ratio of Hubble parameter to angular velocity, right from the beginning of Planck scale, we make an attempt to estimate ordinary matter density ratio, dark matter density ratio, mass, radius, temperature, age and expansion velocity (from and about the baby universe in all directions). We would like suggest that, from the beginning of Planck scale, 1) Dark matter can be considered as a kind of cosmic foam responsible for formation of galaxies. 2) Cosmic angular velocity decreases with square of the decreasing cosmic temperature. 3) Increasing ratio of Hubble parameter to angular velocity plays a crucial role in estimating increasing cosmic expansion velocity and decreasing density ratios of dark matter and ordinary matter. 4) There is no need to consider dark energy for understanding cosmic acceleration.

Waterbomb structures are origami-inspired deformable structural components used in new types of robots. They have a unique radially deployable ability that enables robots to better adapt to their environment. In this paper, we propose a series of new waterbomb structures with square, rectangle, and parallelogram base units. Through quasi-static axial and radial compression experiments and numerical simulations, we prove that the parallelogram waterbomb structure has a twist displacement mode along the axial direction. Compared with the square waterbomb structure, the proposed optimal design of the parallelogram waterbomb structure reduces the critical axial buckling load-to-weight ratio by 55.4% and increases the radial stiffness-to-weight ratio by 67.6%. The significant increase in the radial stiffness-to-weight ratio of the waterbomb structure and decrease in the critical axial buckling load-to-weight ratio make the proposed origami pattern attractive for practical robotics applications.

Finding out how cells with the same genome change fates in differentiation commitment is a challenge of biology. We used MCF-7 breast cancer cells treated with the ErbB2 ligand heregulin (HRG), which induces differentiation, to address if and how the constitutive pericentromere-associated domains (PADs) may be involved in this process. PAD-specific repressive heterochromatin (H3K9me3) and active euchromatin (H3K4me3) marking, centromere (CENPA) labelling, qPCR, acridine-orange-DNA structural test, and microscopic image analysis were applied. We found a two-step DNA unfolding, at 15-20 min and 60 min after HRG treatment, coinciding with bi-phasic activation of the early response genes (c-FOS family) and two steps of critical phase transition which were revealed in transcriptome studies. In control, the distribution of PAD number and size displays a power-law scaling with a boundary at the nucleolus. PADs’ clustering correlates with centromere numbers. 15 min after HRG treatment, the unravelling of PADs occurs, coinciding with the first step of euchromatin unfolding. The second step is associated with transcription of long-non-coding-RNA from satellite III DNA. We hypothesize that splitting of the PAD clusters under the critical size threshold of the silencing domain abrupts position effect variegation. It allows the first genome transcription avalanche to occur, starting differentiation commitment.

We discuss methods for calculation of critical indices and amplitudes from the perturbative expansions. Several important examples of the Stokes flow through 2D and 3D channels are brought up. Power series for the permeability derived for small values of amplitude are employed to calculation of various critical exponents in the regime of large amplitudes. Special nonlinear approximations valid for arbitrary values of the wave amplitude are derived from the expansions. The technique developed for critical phenomena is applied then for relaxation phenomena. The concept of time-translation invariance is discussed, its spontaneous violation and restoration considered. Emerging probabilistic patterns correspond to a local breakdown of time-translation invariance. Their evolution leads to the timetranslation symmetry complete (or partial) restoration. We estimate typical time extent, amplitude and direction for such restorative process. The new technique is based on explicit introduction of origin in time. After some transformations we come to the exponential and generalized, exponential-type solution with explicit finite time scale, which was only implicit in initial parametrization with polynomial approximation. The concept of crash as a relaxation phenomenon, consisting of time-translation invariance breaking and restoration, is put forward. COVID-19 related mini-crash in the time series for Shanghai Composite is discussed as an illustration.

A new teaching method under the name of STEM, integrating the disciplines of Science, Technology, Engineering, and Mathematics, is now taught by teachers in their classes. Considering that the generation that grows up in the 21st-century has grown up with technology, it is thought that integrating technology into lessons helps students learn the subject. The study aims to develop five STEM activities for the human body systems lesson by integrating the coding-based Arduino into STEM education. The activities were implemented to 6th-grade students for seven weeks and the effects on students' skills of establishing a cause-effect relationship. The study method was pre-test-post-test quasi-experimental design, and the cause-effect relationship scale was used as a data collection tool. As a result of the study, a significant difference was found between the Arduino-supported STEM activities developed and the students' skills of establishing a cause-effect relationship.

Critical illness has been recognized to acutely influence bone metabolism and, consequently, bone mineral density. The main purpose of this study was to describe bone metabolism changes in adult survivors of critical illness in the attempt to correlate changes with severity scores. It is an open, prospective, observational, monocentric study on patients admitted to the ICU was conducted, evaluating bone metabolism at baseline (within 72 hours of ICU admission), 6 months, and 12 months. Fifty-nine patients admitted to the ICU (63% males), mean age 58 ± 16 years, were enrolled. Of these, 20 patients (34%) completed the one-year follow up. At baseline, bone resorption showed an increase, which was maintained at 6 months, with normalization at 12 months. Patients showed, in a majority of cases, hypovitaminosis D with hyperparathyroidism at baseline with subsequent normalization. A trend towards a correlation was described between severity scores and serum 25(OH) vitamin D and bone turnover marker levels. These results contribute to the confirmation of a positive association between critical illness requiring ICU and bone metabolism changes. This study poses the bases for further studies to evaluate bone health in ICU patients.

Cobalt, like other critical elements, is gaining in importance today. The great technological advances and the deep knowledge of the physical and chemical properties of this element have allowed to enhance its applications in various fields, such as: catalysts, paints, alloys for the mechanical and aerospace industries, as well as the medical sector and in recent times, its use within the rechargeable battery industry. The main exploitable deposits are in the Democratic Republic of the Congo, which have economic potential due to a strong influence on their mineralization processes. However, the growing demand for cobalt and the search for less dependence on African deposits leads to targeting other regions, so it is necessary to carry out exhaustive exploration to find out the potential of its reserves for a subsequent benefit of the mineral. Generally, cobalt comes as a by-product of the extraction of other metallic minerals, mainly from Cu-Co, Ni-Co, Ni-Cu-Co deposits. From the above, a first review is carried out on the differences that exist in the geochemical, mineralogical and forecast properties that exist within the different deposits that harbor cobalt. As a second review topic, it delves into efficient processing for cobalt recovery, which is generally carried out by flotation, acid leaching, in addition to its recovery from secondary sources, such as batteries and metallurgical waste. However, generally speaking there is still a vast lack of fundamental knowledge about the processability of cobalt. Said processing has been affected from the point of view of mineralogy, that is, understanding and knowing the cobalt-bearing minerals, as well as gangue mineralogy, these aspects exercise significant control during their processing and selection of the most appropriate route. suitable for cobalt extraction (leaching and/or flotation). In this context, the document concludes with a vision of the challenges that the mining industry must implement to enter circular economy models, mainly in the creation of sustainable processes from secondary sources.

Mahanadi is one of the major inter-state east flowing perennial rivers in peninsular India. Hamp watershed of Seonath Sub-basin of upper Mahanadi basin was considered for the study to estimate the sediment yield and nutrient loss-based identification of critical agricultural sub-watershed and its critical Hydrological Response Unit (HRU) using Soil and Water Assessment Tool (SWAT) in-terfaced with GIS i.e., ArcSWAT. The study area was divided into 14 sub-watersheds considering topographical parameters derived from DEM and drainage network. The land cover, soil layers, and DEM were used to generate 207 HRUs for analysis of annual runoff, sediment yield and nu-trient loss for 2004-2008 (calibration period) and 2010-2013 (validation period). The sediment yield, runoff estimation and nutrient loss matched consistently well with the monthly and seasonal measured values. On the basis of average annual sediment yield (18.18 t/ha), runoff (245.97 mm) and nutrient loss NO3-N (1.62 kg/ha), respectively, sub-watershed WS4 was categorized under high priority for critical are identification. The sub watershed WS4 comprises of 15 HRUs (No. 36 - 50) with four kharif crops viz rice, soybean, maize and sugarcane. Results showed that the crops soy-bean, maize and sugarcane reduced the average annual runoff by 18.1, 31.4 and 18.0 per cent, respectively whereas the sediment yield was increased drastically by 104.5, 37.5 and 5.7 per cent, respectively as compared to rice. Soybean and maize crops HRU generate significant amount of soil and nutrient loss and were found to be as the critical HRUs for the upper Mahanadi River basin

Serotonin (5-HT) show important relations to stress, and this relationship is crucial to understanding the psychobiology of common mental disorders. Environmental stressors regulate phasic and tonic serotonin levels, which are related to valence and outcome probabilities. This regulation takes place at smaller timescales, but also at the level of gene expression regulation. Moreover, genes related to the synthesis, metabolism, and transport of 5-HT are also involved in this regulation. Genetic variations in these genes modulate how stressors can lead to mental distress, but stressors also modulate gene expression in a genotype-dependent manner. As a result, the relationship between psychosocial stress and the regulation of the expression of 5-HTergic genes is bidirectional. This suggests a “circular causality” in which gene variations control tonic and phasic 5-HT signals (“upward causality”), while configurations and functions of the entire organism determine which genes are up- or downregulated, or which gene products are actually relevant in each situation (“downward causality”). The highly important role of social factors in human psychopathology is highlighted, and factors such as attachment and socioeconomic status modulate how the circular vertical causality between genes, neurotransmitters, and behavior is organized, representing circular horizontal causality. These complex interrelationships also suggest that more refined epistemologies are needed to fully grasp the relationship between 5-HT and common mental disorders.

We describe a vision for a national-scale heavy mineral (HM) map generated through automated mineralogical identification and quantification of HMs contained in floodplain sediments from large catchments covering most of Australia. The composition of the sediments reflects the dominant rock types in each catchment, with the generally resistant HMs largely preserving the mineralogical fingerprint of their host protoliths through the weathering-transport-deposition cycle. Heavy mineral presence/absence, absolute and relative abundance, and co-occurrence are metrics useful to map, discover and interpret catchment lithotype(s), geodynamic setting, magmatism, metamorphic grade, alteration or mineralization. Underpinning this vision is a pilot project, focusing on a subset of the national sediment sample archive, which is used to demonstrate the feasibility of the larger, national-scale project. We preview a bespoke, cloud-based mineral network analysis (MNA) tool to visualize, explore and discover relationships between HMs as well as between them and geological setting or mineral deposits. We envisage that the Heavy Mineral Map of Australia and MNA tool will contribute significantly to mineral prospectivity analysis and modeling here, particularly for technology critical elements and their host minerals, which are central to the global economy transitioning to a more sustainable, decarbonized paradigm.

The complex systems that require safety are the Safety Critical Systems. Maintaining these systems is a big challenge. Now a days, safety is a very critical requirement for the latest systems. Safety critical systems must be safe. Different approaches to ensure quality and safety in safety critical systems has been discussed in this paper. A comparison is also conducted between these various approaches. Safety critical systems must remain more influential in future.

(1) Background: Ventilator-associated pneumonia (VAP) causes high mortality among patients with respiratory disease and imposes major burdens on healthcare infrastructure. Models that use electronic health record data to predict the onset of VAP may spur earlier treatment and improve patient outcomes. We developed and studied the performance of interpretable machine learning (ML) models that predict the onset of VAP from electronic health records (EHRs); (2) Methods: We trained Logistic Regression (LR), full feature Explainable Boosting Machine (fEBM), and eXtreme Gradient Boosting (XGBoost) ML models on data from the MIMIC- III (v1.3) database. Model performance was measured by area under the receiver operating characteristic curves (AUCs). We trained a minimal-feature EBM model (mEBM) with features derived from white blood cell (WBC) counts, duration of ventilation, and Glasgow Coma Scale (GCS). Finally, model robustness was evaluated on randomly sparsified EHR datasets; (3) Results: The fEBM model outperformed the XGBoost and LR models at 24 hours post-intubation. The mEBM model maintained an AUC of 0.893. The fEBM model performance remained robust on sparsified datasets; (4) Conclusions: Our novel interpretable ML algorithm reliably predicts the onset of VAP in intubated patients. Integration of this EBM-based model into clinical practice may enable clinicians to better anticipate and prevent VAP.

A new picture of the Josephson effect is devised. The radio-frequency (RF) signal, observed in a Josephson junction, is shown to stem from bound electrons, tunneling periodically through the insulating film. This holds also for the microwave mediated tunneling. The Josephson effect is found to be conditioned by the same prerequisite worked out previously for persistent currents, thermal equilibrium and occurence of superconductivity. The observed negative resistance behaviour is shown to originate from the interplay between the normal and superconducting currents.

Satterthwaite and Toepke (1970 Phys. Rev. Lett. 25 741) discovered that Th₄H₁₅-Th₄D₁₅ superhydrides exhibit superconductivity and have no isotope effect. The latter is fundamental contradiction with the concept of electron-phonon mediated superconductivity of Bardeen-Cooper-Schrieffer (BCS) theory. Soon after this work, Stritzker and Buckel (1972 Zeitschrift für Physik A Hadrons and nuclei 257 1-8) reported that superconductors in PdH_x-PdD_x system exhibit reverse isotope effect. Yussouff et al (1995 Solid State Communications 94 549) extended this finding on PdH_x-PdD_x-PdT_x system. Recent interest to hydrogen- and deuterium-rich superconductors is based on the discovery of near-room-temperature superconductivity in highly-compressed H₃S (Drozdov et al. 2015 Nature 525 73) and LaH₁₀ (Somayazulu et al 2019 Phys. Rev. Lett. 122 027001). To date, there is no clarity about isotope effect in H₃S-D₃S system, because thorough examination of available experimental data reported by Drozdov et al (2015 Nature 525 73) shows that H₃S-D₃S system perhaps has reverse isotope effect. In attempt to reaffirm/disprove our primary idea that the mechanism for near-room-temperature superconductivity in hydrogen-rich superconductors is not BCS electron-phonon interaction, we analyse the upper critical field data, B_c2(T), in Th₄H₁₅-Th₄D₁₅ phases (Satterthwaite and Toepke 1970 Phys. Rev. Lett. 25 741) and two recently discovered high-pressure hydrogen-rich phases of ThH₉ and ThH₁₀ (Semenok et al 2019 arXiv:1902.10206). As the result, it is found that all known to date thorium super-hydrides/deuterides are unconventional superconductors which have T_c/T_F ratios within a range of 0.008 < T_c/T_F < 0.120, where T_c is the superconducting transition temperature and T_F is the Fermi temperature.

With reference to Planck scale, Mach’s relation, increasing support for large scale cosmic anisotropy and preferred directions and by introducing two new parameters Gamma and Beta, right from the beginning of Planck scale, we make an attempt to estimate ordinary matter density ratio, dark matter density ratio, mass, radius, temperature, age and expansion velocity (from and about the baby universe in all directions). We would like suggest that, from the beginning of Planck scale, 1) Dark matter can be considered as a kind of cosmic foam responsible for formation of galaxies. 2) Cosmic angular velocity is directly proportional to squared cosmic temperature. 3) Ratio of critical temperature to actual temperature plays a heuristic role in understanding ordinary and dark matter density ratios. 4) Cosmic expansion velocity increases with decreasing total matter density ratio. 5) There is no need to consider dark energy for understanding cosmic acceleration.

The videofluorographic study is indicated for diseases potentially causing dysphagia and aspiration, such as gastrointestinal reflux disease, cancers of the oropharynx and esophagus, and certain neurologic diseases needing swallowing assessment. The study is designed to survey the anatomy and physiology of swallowing to diagnose any swallowing impairment and is standardized using scales such as the Modified Barium Swallow Impairment Profile (MBSImP). The procedure requires the patient to swallow a barium contrasted bolus which helps to visualize and obtain a real-time result. There are certain complications of the procedure including radiation exposure which requires necessary safety protocols to be followed.

It has been suggested that the measured magnetic properties of hydrides under pressure claimed to be high temperature superconductors indicate that the materials are granular superconductors. Such materials will show reduced or no magnetic field expulsion under field cooling, and will trap magnetic fields when the external magnetic field is removed. They will also exhibit hysteretic behavior in magnetoresistance and other transport properties. Here we point out that hysteresis in transport properties has never been reported for hydrides under pressure. Its presence, with the expected features, would indicate that the materials trap magnetic flux, hence that they can sustain persistent currents without dissipation, something that all superconductors can do. Conversely, its absence would indicate that these materials are not superconductors.

Chronic noncommunicable diseases (CNCDs) have been a major public health concern worldwide, especially diabetes, cardiovascular disease, chronic obstructive pulmonary disease, hypertension, in addition to obesity, which is even more worrying when the subject involves the covid-19 pandemic, because such incidences correlate with the need for intensive care units, including the possibility of death of the patient. Therefore, for countries with the highest numbers of critical cases, it is important to assess the incidence of these diseases to guide the public that most needs guidance on public policies for social isolation.

This article is about school evaluation. The objective was to explain critically the mediating relationships between educational evaluation and the production of school knowledge from the perspective of the Dialectical Historical Materialism. With this interest, a documentary analysis was made, obtaining as result four explanatory categories: production, subsumption, distribution and exchange of knowledge, which form a concrete totality with distinctions and antagonistic relationships between them, limited by their opposite. It is concluded that the evaluation as a mediating form lacks antagonistic pair and consequently of control by opposition, emerging from the school daily as autonomous and sovereign entity, oppressive of school subjects.

With reference to Planck scale, Mach's relation and by introducing two new parameters Gamma and Beta, right from the beginning of Planck scale, we make an attempt to estimate ordinary matter density ratio, dark matter density ratio, mass, radius, temperature, age and expansion velocity (from and about the Planck mass in all directions). In analogy with currently believed cosmic acceleration, with a decreasing trend of total matter density ratio, cosmic expansion velocity can be shown to be increasing. By considering $H_0\cong 70$ km/sec/Mpc, estimated current cosmic mass, radius, total matter density, expansion velocity, temperature and age are: $4.3352\times {10}^{53}\mathrm{kg},$ $3.207\times {10}^{26}\mathrm{m},$ $3.138\times {10}^{-27}\mathrm{kg}{.\mathrm{m}}^{-3},$ $2.43c,$ $2.721\mathrm{K}$ and $19.78\mathrm{Billion}\mathrm{years}$ respectively. Point to be noted is that, with reference to Planck scale, cosmic temperature seems to be redshifted by a factor ${\left(Z_T\right)}_t\cong \sqrt{1+\ln \left(H_{pl}/H_t\right)}-1$ where $\left(H_{pl},H_t\right)$ represent Planck scale and time dependent Hubble parameters respectively. As a peculiar case, considering the equality of current Hubble parameter and current angular velocity, current cosmic rotational kinetic energy can be estimated to be 0.667 times the current critical energy. It needs further study.

In the context of the COVID-19 epidemic, and on the basis of the Theory of Dynamical Systems, we propose a simple model for the expansion of contagious diseases, with a particular focus on viral respiratory tracts. The infection develops through contacts between contagious and exposed people, with a rate proportional to contact duration and turnover, inversely proportional to the efficiency of protection measures, and balanced by the average immunological response. The obvious initial exponential increase is readily hindered by the size reduction of the exposed population. The system converges towards a stable attractor whose value is expressed in terms of the ratio C/D of contamination vs decay factors. Decreasing this ratio below a critical value leads to a tipping point beyond which the epidemic is over. By contrast, significant values of C/D may bring the system through a bifurcating hierarchy of stable cycles up to a chaotic behaviour.

This study assesses the development of professional skills in university students using serious games (SG), from a sustainability perspective. The Sustainable Development Goals (SDGs) were set by the United Nations’ 2030 Agenda for Sustainable Development. Universities are strategic agents in the transformation process towards sustainability. This way, they should be committed to promoting such sustainable values in the students through curricular sustainability, implementing active methodologies and SG for that purpose. Transversal skills are essential for the development of future graduates. The objective of this study was to assess which professional skills should be developed through the SG called The Island, to improve the degree of student satisfaction with the incorporation of a sustainable curriculum. The data were obtained using a questionnaire, and then analysed using linear regression models, with their inference estimated through the goodness of fit and ANOVA. The first results indicated that the implementation of the SG promoted a strengthening of the students' sustainable curriculum through the development of those skills. It was concluded that the key to success in education for sustainable development is improving the development of strategic thinking, collaborative thinking, and self-awareness, in addition to encouraging systemic, critical, and problem-solving thinking.

The morphological transformation of an arched ribbon driven by torsion is a scientific problem that is connected with daily life and requires thorough analysis. An arched ribbon can achieve an instantaneous high speed through energy transformation and then return to the original shape of the structure. In this paper, based on the characteristics of the ribbon structure, the dynamic mathematical model of the arched ribbon driven by torsion is established from the Kirchhoff rod equation. The variations of the Euler angle of each point on the center line of the ribbon with the arc coordinate s and the rotation angle of the supports $\phi$ was examined. The relationship between the internal force distribution of each point in the direction of $\hat{d}_{a}$ and the material, cross-sectional properties, and rotation angle of the supports was obtained. We used ABAQUS, a nonlinear finite element analysis tool, to simulate the morphological transformations of the ribbons, verified our theory with simulation results, and reproduced the experimental results of Sano. Furthermore, we redefined the concept of the ``critical flipping point'' of Sano. In this paper, the dimensional analysis method was used to fit the simulation data. The following relationship between the critical width $ w ^{*} $, thickness h, and the radius R of the ribbon with different cross sections was obtained: $w^{*}=A\cdot R\left(h/R\right)^{0.6}$, where A is 3.19 for rectangular cross sections and 3.06 for elliptical cross sections. By analyzing the simulation data, we determined the variation behavior of the out-of-plane deflection of the center point of the ribbon with the radius R, width w, and thickness h. Our research has guiding significance for understanding and designing arched ribbons driven by torsion, and the results can be applied to problems of different scales.

The present era of the Internet of Things (IoT) having intelligent functionalities in solving problems pertaining to realtime mission-critical systems has brought an immense revolution in diverse fields including healthcare and navigation systems. However, to the best of our knowledge, the potential of IoT has not been fully exploited yet in the field of the energy sector. We argue that there is an immense need to shift the traditional mission-critical electric power system architecture to IoT-based fully orchestrated architecture in order to increase efficiency, as billions of investment is reserved for the energy sector globally. Since network orchestration deals with auomating the interaction between multiple components involved to execute a particular service, therefore, scheduling the relevant processes within strict deadlines becomes the core pillar of the architecture. The mission-critical systems with urgent task execution often suffer from issues of missing task deadlines. In this study, we present a novel IoT task orchestration architecture for efficient energy management of a nanogrid system that focuses on minimizing the use of nonrenewable energy resources and maximizing the use of renewable energy resources. Moreover, major components of IoT task orchestration such as task mapping and task scheduling are also enhanced using NLP and PSO optimization modules. The proposed task scheduling algorithm incorporates the optimized surplus time, and efficiently executes the energy management-related tasks contemplating to their types. The study utilizes sensors to obtain data from physical IoT devices, including photovoltaic (PV), Energy Storage System (ESS), and diesel generator (DG). The performance of the proposed model is evaluated using data set of nanogrid houses. The outcomes revealed that IoT-task orchestration has played a pivotal role in efficient energy management for nanogrid mission-critical system. Furthermore, the comparison with state-of-the-art scheduling algorithms showed that the task starvation rate is reduced to 16% and 12% when compared with RR and FEF algorithms, respectively.

Objective: This study aims to identify the impact of nutritional factors on mechanical ventilation duration for critical patients. Patients and Methods: The current study was a single-center, prospective observational design which enrolled one-hundred critically ill patients who were admitted to an intensive care unit (ICU). It demonstrates purposive sampling and also performs the descriptive nutritional factors influencing the mechanical ventilation duration. Daily calories target requirement scale (DCRS), subjective global assessment form (SGA), dyspnea assessment form, and APACHE II have been used as methods in the study along with time to initial enteral nutrition (EN) after 24-hour admission and daily calories target requirement over 7 days to assess patients. Data is analyzed using the multiple regressions. Results: As a result, nutritional status monitoring, time to initial EN, calories and target requirements are statistically positive significance associated with the mechanical ventilation duration respectively (R = 0.54, R = 0.30, R= 0.40, p < 0.05). However, age, illness severity, and dyspnea scales are not associated with the mechanical ventilation duration (p> 0.05). Therefore, the nutritional status, malnutrition scores and calorie target requirements can be used to significantly predict the mechanical ventilation duration. The predictive power is 58 and 28.0% of variance. The most proper influencer to predict the mechanical ventilation duration is nutritional status or malnutrition scores. Conclusion: The research findings show that the nutritional status, time to initial EN, and calorie target requirement within 7 days of admission are associated with the mechanical ventilation duration in the critical patients. Therefore, it can be used to develop guidelines reducing the mechanical ventilation duration and to promote the ventilator halting for critical patients.

Owing to the reduction of rupture instability and the avoidance of wrinkle defect, hydrodynamic deep drawing (HDD) process is gradually becoming attractive for fabricating lightweight and complicated products. Meanwhile, since metallic material presents anisotropic deformation behavior, it is necessary to select an appropriate constitutive model for the prediction of plastic deformation behavior of applied material with high precision. In the present research, several anisotropic yield criteria namely, Hill’48, Yld2000-2d and BBC2005 are implemented to investigate the effect of yield functions on the prediction accuracy of the critical process window and deformation behavior for HDD process of 2024 and 5754 aluminum alloys. Material constants in the yield criteria are determined by applying uniaxial and equi-biaxial tension tests and optimizing an error-function by using the Levenberg-Marquardt algorithm. Furthermore, the process window diagram is computed utilizing the stress analytical model combined material properties with workpiece geometrical features. Numerical simulation results of predicted material anisotropic parameters, process window and HDD deformation for aluminum alloys are compared with the experimental data. Through the comparison of diverse yield criteria based on materials anisotropic coefficients, critical process window prediction, earing profile, and thickness distribution, it is revealed that the Yld2000-2d and the BBC2005 yield criteria can offer more precise models of material behavior in planar anisotropy properties for HDD process of 2024 and 5754 aluminum alloys.

This paper deals with the characteristics of the cyclone separator from the Lagrangian perspective to design important dependent variables, develops a neural network model for predicting the separation performance parameter, and compares the predictive performance between the traditional surrogate model and the neural network model. In order to design the important parameters of the cyclone separator based on the particle separation theory, the force acting until the particles are separated was calculated using the Lagrangian-based CFD methodology. As a result, it was proved that the centrifugal force and drag acting on the critical diameter having a separation efficiency of 50% were similar, and the particle separation phenomenon in the cyclone occurred from the critical diameter, and it was set as an important dependent variable. For developing a critical diameter prediction model based on machine learning and multiple regression methods, Unsteady-RANS analyzes according to shape dimensions were performed. The input design variables for predicting the critical diameter were selected as four geometry parameters that affect the turbulent flow inside the cyclone. As a result of comparing the model prediction performances, the ML model showed the 32.5 % of improvement rate of R2 compared to the traditional MLR considering the nonlinear relationship between the cyclone design variable and the critical diameter. The proposed techniques have proven to be fast and practical tools for cyclone design.

Septic shock substantially alters the pharmacokinetic properties of ß-lactams with a subsequently high risk of insufficiently low serum concentrations and treatment failure. Considering their pharmacokinetic (PK)/pharmacodynamic (PD) index, prolonged infusions (PI) of ß-lactams extend the time that the unbound fraction of the drug remains above the minimal inhibitory concentration MIC (ft >MIC) and may improve patient survival. The present study is a monocentric, retrospective before-and-after analysis of septic shock patients treated with ß-lactams. Patients of the years 2015-2017 received intermittent bolus application whereas patients of 2017-2020 received PI of ß-lactams. The primary outcome was mortality at day 30 and 90 after diagnosis of septic shock. Mortality rates in the PI group were significantly lower on day 30 (PI: 41%, n=119/290 vs. IB: 54.8%, n=68/114; p=0.0097) and day 90 (PI: 47.9%, n=139/290 vs. IB: 62.9%, n=78/124; p=0.005). After propensity-score matching, 30- and 90-day mortality remained lower for the PI group (-10%). PI further reduced duration of invasive ventilation. PI of β-lactam antibiotics led to a stronger decrease in SOFA scores within a 14d-observation period. PI of ß-lactams significantly reduces mortality in patients with septic shock and may have beneficial effects on invasive ventilation and recovery from sepsis-related organ failure.

The sense of uncertainty and fragility due to the effects and magnitude of global challenges we are facing (from pandemic circumstances to climate change impacts) requires – much more than in the past – the capacity to generate a visionary and forefront design approach in the young gen-erations aiming at stimulating their reaction attitude rather than providing consolidated tools from past conditions that no longer exist or will rapidly evolve. Within this general framework, we have investigated the effectiveness and impacts of experienced-based methods of learning and innovative educational tools in architecture aimed at shaping expertise in which the environ-mental dimension and the climate-change challenge dialogues with the context's complexity in terms of socio-cultural dynamics, real potentialities and constrains, addressing their transdisci-plinary trajectories. The paper analyses 5 international pioneering teaching experiences that provide the opportunity to understand the outcomes of collaborative and experiential learning processes in which the educational activities leverage a dialogue between diverse communities (academia-citizens-policymakers-practitioners). The study outcomes show that shifting the pedagogical paradigm towards in-field-experience-based models can improve the awareness of future practitioners for climate implications of architectural design, implement their analysis and project skills while triggering processes of knowledge transfer and co-production at community level, and allow them to better address the societal and cultural issues involved within decision making.

Demand for niobium and tantalum is increasing exponentially as these are essential ingredients for the manufacture of, among others, capacitors in technological devices and ferroniobium. Mine tailings rich in such elements could constitute an important source of Nb and Ta in the future and so alleviate potential supply risks. This paper evaluates the possibility of recovering niobium and tantalum from the slags generated during the tin beneficiation process of mine tailings from the old Penouta mine, located in Spain. To do so, a simulation of the processes that would be required to beneficiate and refine both elements is carried out. After tin carbothermic reduction, the slags are sent to a hydrometallurgical process where at the end niobium oxide and tantalum oxide are obtained. Reagents, water and energy consumption, in addition to emissions, effluents and product yields are assessed. Certain factors were identified as critical, and recirculation was encouraged in the model to maximize production and minimize reagents use and wastes. With this simulation, considering 3000 production hours per year, the metal output from the tailings of the old mine could cover around 1% and 7.4% of the world annual Nb and Ta demand, respectively.

Amine containing polymers are extensively studied as special carriers for short-chain RNA (13–25 nucleotides) which are applied as gene silencing agent in gene therapy of various diseases including cancer. Elaboration of the oligonucleotide carriers requires knowledge about peculiarities of oligonucleotide - polymeric amine interaction. Critical length of the interacting chains is the important parameter which allows to design sophisticated constructions containing oligonucleotide binding segments, solubilizing, protective and aiming parts. We studied interaction of (TCAG)n, n=1-6 DNA oligonucleotides with polyethylenimine and poly(N-(3-((3-(dimethyl­amino)propyl)(methyl)amino)propyl)-N-methylacrylamide). Critical length for oligonucleotides in interaction with polymeric amines is 8-12 units and complexation at these length can be accompanied by "all-or-nothing" effects. New dimethylacrylamide based polymers with grafted polyamine chains were obtained and studied in complexation with DNA and RNA oligonucleotides. The most effective interaction and transfection activity into A549 cancer cells was found for a sample with average number of nitrogens in polyamine chain equal to 27, i.e. for a sample in which all grafted chains are longer the critical length for polymeric amine - oligonucleotide complexation.

The article obtains large deviation asymptotic for sub-critical communication networks modelled as signal-interference-noise-ratio(SINR) random networks. To achieve this, we define the empirical power measure and the empirical connectivity measure, as well as prove joint large deviation principles(LDPs) for the two empirical measures on two different scales. Using the joint LDPs, we prove an Asymptotic equipartition property(AEP) for wireless telecommunication Networks modelled as the subcritical SINR random networks. Further, we prove a Local Large deviation principle(LLDP) for the sub-critical SINR random network. From the LLDPs, we prove the large deviation principle, and a classical McMillan Theorem for the stochastic SINR model processes. Note that, the LDPs for the empirical measures of this stochastic SINR random network model were derived on spaces of measures equipped with the $\tau-$ topology, and the LLDPs were deduced in the space of SINR model process without any topological limitations. We motivate the study by describing a possible anomaly detection test for SINR random networks.

Ongoing climate change causes abnormal climate events worldwide such as increasing temperatures and changing rainfall patterns. With South Korea facing growing damage from the increased frequency of localized heavy rains, the country is not an exception. In particular, its steep slope lands, including mountainous areas, are vulnerable to damage from landslides and debris flows. In addition, localized short-term heavy rains that occur in urban areas with extremely high intensity tend to lead a sharp increase in damage from soil-related disasters and cause huge losses of life and property. Currently, South Korea predicts landslides and debris flows using the standards for forecasting landslides and heavy rains. However, as the forecasting is conducted separately for rainfall intensity and accumulated rainfall, this lacks a technique that reflects both amount and intensity of rainfall in an episode of localized heavy rainfall. This study, therefore, aims to develop such a technique by collecting past cases of debris flow occurrences and rainfall events that accompanied debris flows to calculate the rainfall triggering index (RTI) reflecting accumulated rainfall and rainfall intensity. In addition, the RTI is converted into the critical accumulated rainfall (Rc) to use precipitation information and provide real-time forecasting. The study classifies the standards for flow debris forecasting into three levels: ALERT (10%–50%), WARNING (50%–70%), and EMERGENCY (70% or higher), to provide a nomogram for 6 hr, 12 hr, and 24 hr. As a result of applying this classification into the actual cases of Seoul, Chuncheon, and Cheongju, it is found that about 2–4 hr of response time is secured from the point of the Emergency level to the occurrence of debris flows.

Due to the upward trend in the globalization of sustainability issues and the intense competitive environment, it is evident that higher education institutions need new strategic approaches to succeed. To this end, the inquiry for this paper has been made into the debate about student relationship management. Going through the literature indicates that institutions have mainly perceived the concept as a technological initiative for solving the problems in individual domains, accompanied by uncoordinated efforts. Thus, the aims of this study are to theoretically present critical success factors of this strategic approach and to empirically examine the recognized factors. To do so, confirmatory factor analysis that is a quantitative analytic method was performed. The results and analyses revealed that there has been a significant correlation between the four critical success factors including knowledge management, student relationship management technology, student orientation, and employees’ involvement. It was also found that these factors are significantly correlated with the construct of student relationship management success. The findings have consequently highlighted that in addition to the technological tool, the role of knowledge management, employees’ involvement, and student orientation appeared to be particularly important for the implementation of the application.

An explanation of the origin of dark matter is suggested in this work. The argument is based on symmetry considerations about the concept of mass. In the Wigner's view, the rest mass and the spin of a free elementary particle in flat space-time are the two invariants that characterize the associated unitary irreducible representation of the Poincar\'e group. The Poincar\'e group has two and only two deformations with maximal symmetry. They describe respectively the de Sitter (dS) and Anti de Sitter (AdS) kinematic symmetries. Analogously to their shared flat space-time limit, two invariants, spin and energy scale for de Sitter and rest energy for Anti de Sitter, characterize the unitary irreducible representation associated with dS and AdS elementary systems. While the dS energy scale is a simple deformation of the Poincaré rest energy and so has a purely mass nature, AdS rest energy is the sum of a purely mass component and a kind of zero-point energy derived from the curvature. An analysis based on recent estimates on the chemical freeze-out temperature marking in Early Universe the phase transition quark-gluon plasma epoch to the hadron epoch supports the guess that dark matter energy might originate from an effective AdS curvature energy.

Therapeutic proteins are used to successfully treat hemophilia, Crohn’s Disease, diabetes, and cancer. Recent product recalls have occurred because of sub-visible particle formation resulting from the inherent instability of proteins. It has been suggested that particle formation is associated with late stage processing steps of filling, shipping, and delivery. Previous works demonstrated that cavitation might occur in therapeutic vials subjected to agitation or accidentally dropped, but that mitigation can be achieved with fluid property manipulation. The goal of this research was to (1) assess the risk of cavitation under common pharmaceutical manufacturing conditions (i.e., pipe contraction and pumps), (2) establish a simple threshold criterion for when particulate will form, and (3) suggest a series of mitigation techniques based on these thresholds. To accomplish these tasks, computational fluid dynamic simulations for a variety of pipe contraction and fluid properties were performed. The results of this research show that reducing the turbulence in a fluid system will reduce the likelihood of cavitation. Additionally, threshold bounds were created that establish a definitive transition at which cavitation will occur.

Background: The Sequential Organ Failure Assessment (SOFA) is a scoring system used for the evaluation of disease severity and prognosis of critically ill patients. The impedance ratio (Imp-R) is a novel mortality predictor. Aims: This study aimed to evaluate the combination of SOFA + Imp-R in the prediction of mortality in critically ill patients admitted to the emergency department (ED). Methods: A retrospective cohort study was performed in adult patients with acute illness admitted to the ED of a tertiary-care referral center. Baseline SOFA score and bioelectrical impedance analysis to obtain the Imp-R were performed within the first 24 hours after admission to the ED. A Cox regression analysis was performed to evaluate mortality risk of initial SOFA score plus Imp-R. Harrell's C-statistic and decision curve analyses (DCA) were performed. Results: Out of 325 patients, 240 were included for analysis. Overall mortality was 31.3%. Only 21.3% of non-surviving patients died after hospital discharge, and 78.4% died during hospital stay. Of the latter, 40.6% died in the ED. SOFA and Imp-R values were higher in non-survivors and were significantly associated with mortality in all models. The combination of SOFA + Imp-R significantly predicted 30-day mortality, in-hospital mortality, and ED mortality with area under the curve (AUC) of 0.80 (95% CI: 74-0.86), 0.79 (95% CI: 0.74-0.86) and 0.75 (95% CI: 0.66-0.84) respectively. The DCA showed that combining SOFA + Imp-R improved the prediction of mortality through the lower risk thresholds. Conclusion: The addition of Imp-R to baseline SOFA score at admission to the ED improves mortality prediction in severely acutely ill patients admitted to the ED.

This initial report of a longitudinal study of 192 English hospital nurses has measured Nursing Values (the 6Cs of nursing); Personality, Self-Esteem and Depression; Burnout Potential; Work-Life Balance Stress; ‘Hardy Personality’; and Intention to Leave Nursing. Correlational, component and cluster analysis identifies four groups: “The Soldiers” (N = 79) , with medium scores on most measures, who bravely ‘soldier on’ in their nursing roles, in the face of numerous financial cuts to the National Health Service, and worsening nurse-patient ratios; “Cheerful Professionals” (N = 54), coping successfully with nursing roles, and a variety of challenges, in upwardly mobile careers; “High Achievers” (N = 39), senior nurses with strong profiles of a ‘hardy personality’, and commitment to fundamental nursing values; “Highly Stressed, Potential Leavers” (N = 20), with indicators of significant psychological distress, and difficulty in coping with nursing role challenges. We propose a model of co-counselling and social support for this distressed group, by nurses who are coping more successfully with multiple challenges. We discuss the role of nurse educators in fostering nursing values, and developing and supporting ‘hardy personality’ and emotional resilience in recruits to nursing. This study is framed within the disciplinary approach of Critical Realism, which identifies the value basis for research and dialogue in developing strategies for social change.

Background: The treatment of peripheral arterial disease (PAD) is focused on improving perfusion and oxygenation in the affected limb. Standard revascularization methods include bypass surgery, endovascular interventional procedures, or hybrid revascularization. Cell-based therapy can be an alternative strategy for patients with no-option critical limb ischemia who are not eligible for endovascular or surgical procedures. Aims: This review offers an up-to-date critical overview of the knowledge and data of evidence-based medicine on the position of cell therapy in the treatment of PAD. It provides an overview of current evidence and appraises the future perspectives of cell-based therapy, emphasizing the potential of exosomal cell-free approaches in patients with critical limb ischemia. Results: Meta-analyses focused on cell therapy problems in PAD treatment confirm a significantly greater chance of limb salvage in the first year after the cell therapy administration. The opportunity of defect healing is at least two times higher when compared with the standard conservative therapy. Secondary endpoints of the available meta-analyses are also included in this review. Improvement of perfusion and oxygenation parameters in the affected limb, pain regression, and claudication interval prolongation are discussed. Conclusions: The available evidence-based medicine data show that this technique is safe, associated with minimum complications or adverse events, and effective.

In this study, Fe-based superconductors (SCs) are described with a model showing a novel attractive force. First, we describe this novel force using an analog from electromagnetism. From electromagnetism, it was found that this force is a Lorentz force in which two electrons orbit around a Fe-ion with the same velocity. Then, we consider a wave function of an electron. Consequently, due to the property of the proposed attractive force and the quantum-field Hamiltonian, we clarified that the Bardeen–Cooper–Schrieffer (BCS) ground state can be reused. Afterward, attractive force energy was calculated according to the presented model. In Fe-based SCs, a structure transition is essential. Considering that the derived attractive force energy is relatively large, we employ the expanded T_c-equation from the BCS theory that includes the structure transition effect and the derived attractive force energy. In addition, we succeed in analytically reproducing T_c-dome diagrams in various types of Fe-based SCs. Moreover, we discuss the universal property a general SC should have as well as the quantum critical point.

Intensive care nurses are highly prone to occupational stress and burnout, affecting their physical and mental health. The occurrence of the pandemic and related events increased nurses’ workload and exacerbated stress and burnout. We conducted a prospective longitudinal mixed-methods study with a cohort of nurses working in a medical ICU (COVID unit; n = 14) and cardiovascular ICU (non-COVID unit; n = 5). Each participant was followed for six 12-hour shifts. Validated questionnaires measured occupational stress and burnout prevalence. Wrist-worn wearable technologies recorded physiological indices of stress. Participants elaborated on the contributors to stress via post-study questionnaire. Data were analyzed using statistical and qualitative methods. Participants who cared for COVID patients at the COVID unit were 3.71 times more likely to experience stress (p &lt; .001) in comparison to non-COVID unit participants. No differences in stress levels were found when the same participants worked with COVID and non-COVID patients at different shifts at the COVID unit. The cohorts expressed similar contributors to stress including communication tasks, patient acuity, clinical procedures, admission processes, proning, labs, and assisting coworkers. Nurses in COVID units, irrespective of whether they care for a COVID patient, may experience high occupational stress and burnout.

A debris flows generation related to a poorly sorted mixture of soil, catchment topography and rainfall characteristic. Runoff of some depth on valley resulting from intensive rainfall can incur the sediments movement of beds or adjacent banks. The fluid flow in channel affected by rainfall parameters combinations, such as duration, intensity, cumulative rainfall, etc., is the key factor for debris movement. In this paper, the rainfall characteristics and occurrence conditions of debris flow in Xiongmao gully on July, 26th, 2016, have been explored, combined with field survey and indoor simulation experiment on the collected critical discharge parameters of debris movement. Further, debris distribution and the critical discharge characteristics have been analysed, by means of investigation on the catchment topography and occurrence cause of the debris flow, analysis of the critical discharge parameters on which the channel debris began to move, and K value clustering analysis method to characterize the rainfall pattern of the studied area, the discharge calculation of debris flow occurring in different rainfall patterns. The results have shown that, for the debris flow occurrence in Xiongmao gully, the debris initiation on the middle reaches of the gully provide the majority of solid particles for the disaster on July, 26th, 2016, and the upstream confluent provided catchment. Based on the relationship obtained from laboratory test, in which the calculated critical discharge was 43.8m3/s, less than the peak discharge (Qc =66.7m3/s), calculated by morphological method. In addition, it has been indicated that the dominated rainfall patterns of the studied area are first-quartile and second-quartile, that is, the rainfall is primarily at earlier or middle to preliminary stage of this time rainfall event. The critical discharge for the occurrence of debris flow on July, 26th was achieved 20a rainfall frequency, the larger runoff volume generated on shorten heavily rainfall. Based on individuality characteristics, such as distributed hydrological analysis, critical discharge and rainfall pattern of debris flow, the forewarning could be more efficient.

Socio-ecologic, socio-economic, and socio-technical transitions are opportunities that require fundamental changes in the system. These will encounter matters associated with security, service adoption by end-users, infrastructure and availability. The purpose of this study is to examine and overcome the risks to take advantage of opportunities through the novel Risky-Opportunity Analysis Method (ROAM). A novel quantitative method is designed to determine when, after making some changes, the risks become acceptable so that the opportunity does not deviate from the objectives. The approach provided a quantitative evaluation of the possible changes in parallel with digitization, towards providing a green Service Supply Chain (SSC). The result of ROAM shows that the most cost-effective change to increase the resilience of the system is a solution (SMS) which is different from that identified by a TOPSIS multi-criteria method. Real-word decisions in change management should tackle the complexity of systems and uncertainty of events during and after transition through a careful analysis of the alternatives. A case-study was carried out to evaluate the alternatives of an ancillary service in the Payment Service Providers (PSP). The comparison of the ROAM results with the traditional TOPSIS of the case-study unveils the priority of the ROAM in practice when the alternatives are Risky-Opportunities. The existing risk assessment tools do not take advantage of risky opportunities. To this aim, the current article introduces the term Risky-Opportunity, and two indexes Stress and Strain of the alternatives that are designed to be employed in the new quantitative ROAM approach.

In this paper, the ductile fracture mechanism is discussed. The results of the numerical and experimental analyses are used to estimate of the onset of the crack front growth . It is assumed that the ductile fracture in front of the crack starts at the location along the crack front where the accumulated effective plastic strain reaches a critical value. It is also assumed that the critical effective plastic strain depends on the stress triaxiality and the Lode angle. The experimental programme was performed using five different specimen geometries, three different materials and three different temperatures of +20°C, -20°C and -50°C. Using the experimental data and the results of the finite element computations, the critical effective plastic strains are determined for each material and each temperature. However, before the critical effective plastic strain is determined, a careful calibration of the stress–strain curves was performed after modification of the Bai–Wierzbicki procedure. Finally, by analysing the experimental results recorded during the interrupted fracture tests and scanning microscopy observations, the research hypothesis is verified.

The first objective of this paper is to investigate the scaling behavior of liquid-vapor phase transition in FCC and BCC metals starting from the zero-temperature four-parameter formula for cohesive energy. The effective potentials between the atoms in the solid are determined using lattice inversion techniques as a function of scaling variables in the above formula. These potentials are split into repulsive and attractive parts as per the Weeks-Chandler-Anderson prescription, and used in the coupling-parameter expansion for solving the Ornstein-Zernike equation supplemented with an accurate closure. Thermodynamic quantities obtained via the correlation functions are used to obtain critical point parameters and liquid-vapor phase diagrams. Their dependence on the scaling variables in the cohesive energy formula are also determined. Equally important second objective of the paper is to revisit coupling parameter expansion for solving the Ornstein-Zernike equation. The Newton-Armijo non-linear solver and Krylov-space based linear solvers are employed in this regard. These methods generate a robust algorithm that can be used to span the entire fluid region, except very low temperatures. Accuracy of the method is established by comparing the phase diagrams with those obtained via computer simulation. Avoidance of the 'no-solution-region' of Ornstein-Zernike equation in coupling-parameter expansion is also discussed. Details of the method and the complete algorithm provided here would make this technique more accessible to researchers investigating thermodynamic properties of one component fluids.