Statistical based reconstruction methods and signal processing tooling techniques are implemented and used to detect delaminations or debondings within composite items. From literature it appears that, although a single procedure for the estimation of the structural health is a fast solution, a multiple analysis based on different reconstruction methods or different damage parameters could provide more detailed information about the location and the severity of possible failures. This work discusses the advantage of using cross-correlation analysis in a data-driven approach based on ultrasonic guided waves (GW) tomographic technique and piezoelectrics (PWAS) in pitch-catch configuration. In this sense, this work evidences an improvement in damage detection when the cross-correlation is included as part of the GW-based system for damage assessment approach. The specimens used as test structures to demonstrate the validity of the methodology derive from an aircraft wing test article where damages are specified as skin delamination produced by low energy impact.

The Yamuna River in Delhi is a prevalent epitome of the depleted ecosystem that has transformed into a sewage drain due to intense pollution and blooming anthropogenic pressure. As a leading polluter, Delhi contributes to more than 70% of Yamuna's pollution load. Its drains discharge a massive B.O.D. load daily into the river, making it severely polluted, as reflected by the water quality index. The paper uses secondary data to analyze the parameters to determine the water quality of Yamuna at different monitoring sites. It performs correlation analysis to determine the relationship among factors contributing to river water pollution. The results of correlation analysis suggest a highly significant association between parameters COD-BOD, but the association is mild to a minimum among other parameters such as BOD-DO, BOD-pH, COD-DO, COD-pH and DO-pH. Most parameters were observed to be above the hazardous level acceptable for using river water. The analysis of S.T.P.s indicates the need to increase the capacity in terms of treatment, storage, reopening of closed plants and efficient operation to meet the increasing demand for fresh Water. Also, there is a need to create demand for wastewater in different sectors of urban areas like construction, horticulture, industrial coolants, etc.

Irrigation and fertilizer are two essential factors affecting rice root traits and yield. In this respect, a pot experiment was performed at the boro (dry season irrigated) season of 2021-22 in the Department of Agronomy of Bangladesh Agricultural University, Mymensingh, Bangladesh. The variety Binadhan-10 was planted at two irrigation conditions i.e. saturation (S) and continuous flooding (CF); two potassium (K) dose e.g. 65 kg ha-1 (K65) and 98 kg ha-1 (K98) and two nitrogen (N) dose i.e. 140 kg ha-1 (N140) and 210 kg ha-1 (N210). The experiment was laid in split plot design and replicated thrice. The findings confirmed the effectiveness of irrigation, K and N on root number (RN), root length (RL), root volume (RV), leaf area index (LAI), total dry matter (TDM), yield attributes and yield. Considering interaction among irrigation, K and N, S condition with K65 and N140 showed best performance. At 80 DAT, the highest RN (373.00), RL (1700.00 cm), RV (8.90 cm3 hill-1), LAI (4.94) and TDM (25.83 g plant-1) was obtained from this combination. Grain yield (GY) and root traits except root porosity, showed a significant positive association. Grain yield (GY) was highest (27.12 g pot-1) in S condition with K65 and N140.

Owing to the advantages of cost-effectiveness, compactness, and the avoidance of complicated camera synchronization, single-camera three-dimensional (3D) digital image correlation (DIC) techniques have gained increasing attention for deformation measurement of materials and structures. In the traditional single-camera 3D-DIC system, the left and right view images can be recorded by a single camera using a diffraction grating, a bi-prism or a set of planar mirrors. To further improve the measurement accuracy of single-camera 3D-DIC, this paper introduces a single-camera four-view imaging technique by installing a pyramidal prism in front of the camera. The 3D reconstruction of the measured points before and after deformation is realized with eight governing equations induced by four views, and the strong geometric constraints of four views can help to improve the measurement accuracy. A static experiment, a rigid body translation experiment and a four-point bending experiment show that the proposed single-camera 3D-DIC method can achieve higher measurement accuracy than the dual-view single-camera 3D-DIC techniques and has advantages in reducing both random error and systematic error.

Rice varieties such as Mahsuri Mutan and Basmati 370 are categorized as specialty rice with kernel elongation ratio exceeding 1.6 and 2.0, respectively. Ageing treatment in rice could affect the physical and chemical properties of rice such as grain size and shape, quality and taste of the cooked rice. The main objective of this study was to determine the effects of ageing treatment on the physicochemical properties of Mahsuri Mutan, Basmati 370 and MR219 rice varieties. The three rice varieties were subjected to heat treatment at 90ºC using the oven for 3 hours. After the heat treatment, the samples were cooled at room temperature (25ºC) for 1 hour. Physicochemical properties such as alkali digestion value, water uptake ratio (WUR), solids in cooking water (SCW), high kernel elongation (HKE) ratio and amylose contents were determined. Data collected on physicochemical traits and ageing vs non-ageing treatments were subjected to analysis of variance (ANOVA) using SAS software version 9.4. Phenotypic correlation coefficient indicated that there was a high positive correlation between HKE and water uptake ratio. The ageing treatment also showed significant difference in all the physicochemical traits of the varieties studied. Observation under electron microscope showed that the ageing samples had more cracks on the tissue structure compared to normal rice samples. The hexagon structure in Mahsuri Mutan gave more elongation effect on its kernel. The findings from this study could be useful to breeders in selection and development of new high kernel elongation rice variety.

Pregnancy is a dynamic state with multiple metabolic changes occurring including insulin resistance. Gestational diabetes mellitus (GDM), a form of diabetes that appears during pregnancy, develops if metabolic aberrations occur, in particular, in normal pregnancy-induced insulin resistance. Multi-omics is a powerful approach for uncovering the mechanisms driving metabolic change in different physiologic and pathologic states. A recent study demonstrated that the gestational gut microbiome mediates pregnancy metabolic adaptations through effects on gut indoleamine-2,3 dioxygenase 1 activity and the production of kynurenine. Using the dataset generated from this highly controlled study, we performed a comprehensive analysis of the pregnancy-specific physiological and metabolic profiles, 16S rRNA microbiome, and plasma untargeted LC-MS metabolome data. To facilitate the utilization of these analysis results by other researchers, we developed MOMMI-MP, a database that provides an easy-to-use platform to browse and search differential abundant microbial taxa and metabolites, and to examine metabolic pathways. The datasets consist of data collected from 3 genetically diverse strains of mice (C57BL/6J, CD1, and NIH-Swiss) over 6 time points during the gestational (days 0, 10, 15, and 19 during gestation) and postpartum (days 3 and 20 after delivery) states, totaling 180 samples for each strain. The computational results are presented in various tables and plots, and organized in MOMMI-MP to empower exploratory analyses by other researchers. In conclusion, MOMMI-MP is a resource to facilitate the investigation of novel mechanisms governing metabolic changes during pregnancy.

This article presents an estimation of the hypertension risk based on a dataset on 1007 individuals. The application of a Tobit Model shows that “Hypertension” is positively associated to “Age”, “BMI-Body Mass Index”, and “Heart Rate”. The data show that the element that has the greatest impact in determining inflation risk is “BMI-Body Mass Index”. An analysis was then carried out using the fuzzy c-Means algorithm optimized with the use of the Silhouette coefficient. The result shows that the optimal number of clusters is 9. A comparison was then made between eight different machine-learning algorithms for predicting the value of the Hypertension Risk. The best performing algorithm is the Gradient Boosted Trees Regression according to the analyzed dataset. The results show that there are 37 individuals who have a predicted hypertension value greater than 0.75, 35 individuals who have a predicted hypertension value between 0.5 and 0.75, while 227 individuals have a hypertension value between 0.0 and 0.5 units.

The accurate prediction of heat load profiles with a daily resolution is required for a broad range of applications such as potential studies, design, or predictive operation of heating systems. If the heat demand of a consumer is mainly caused by (production) processes independent of the ambient temperature, existing load profile prediction methods fail. To close this gap, this study develops two ex post machine learning models for the prediction of the heat demand with a daily resolution. The selected input features are commonly available to each consumer connected to public natural gas and electricity grids or operating an energy monitoring system: Ambient temperature, weekday, electricity consumption, and heat consumption of the last seven days directly before the predicted day. The study’s database covers electricity and natural gas consumption load profiles from 82 German consumers over a period of two years. Electricity and heat consumption correlate strongly with individual patterns for many consumers. Both, shallow and deep learning algorithms are evaluated. The highest accuracy is achieved by a Long Short Term Memory (LSTM) model with a median of R² of 0.94. The ex post model architecture makes the model suitable for automated anomaly detection in energy monitoring systems.

The spatial distribution of elements can be regarded as a numerical field of concentration values with a continuous spatial coverage. An active area of research is to discover geologically meaningful relationships among elements from their spatial distribution. To solve this problem, we propose an association rule mining method based on clustered events of spatial auto-correlation and applied it to the polymetallic deposits of the Chahanwusu River area, Qinghai Province, China. The elemental data for stream sediments were first clustered into HH (high-high), LL (low-low), HL (high-low), and LH (low-high) groups by using local Moran’s I clustering map (LMIC). Then the Apriori algorithm was used to mine the association rules among different elements in these clusters. More than 86% of the mined rule points are located within 1000 m of faults and near known ore occurrences, and occur in the upper reaches of the stream and catchment areas. In addition, we found that the Indosinian granodiorite is enriched in sulfophile elements, e.g., Zn, Ag and Cd, and the Variscan granite quartz diorite (P1γδο) coexists with Cu and associated elements. Therefore, the proposed algorithm is an effective method for mining co-existence patterns of elements and provides an insight into their enrichment mechanisms.

In this study dual PET and contrast enhanced MRI were combined to investigate their correlation per voxel in patients at initial diagnosis with suspected glioblastoma. Correlation with contrast enhancement (CE) as an indicator of BBB leakage was further used to evaluate whether PET signal is likely caused by BBB disruption alone, or rather attributable to specific binding after BBB passage. PET images with [18F]GE180 and the amino acid [18F]FET were acquired and normalized to healthy background (TBR). Contrast enhanced images were normalized voxel by voxel with the pre-contrast T1-weighted MRI to generate relative CE values (rCE). Voxel-wise analysis revealed a high PET signal even within the sub-volumes without detectable CE. No to moderate correlation of rCE with TBR voxel-values and a small overlap as well as a larger distance of the hotspots delineated in rCE and TBR-PET images were detected. In contrast, voxel-wise correlation between both PET modalities was strong for most patients and hotspots showed a moderate overlap and distance. The high PET signal in tumor sub-volumes without CE observed in voxel-wise analysis as well as the discordant hotspots emphasize the specificity of the PET signals and the relevance of combined differential information from dual PET and MRI images.

Around the world, every year, about 17 million people death cause happen due to CardioVascular Diseases (CVD). As per clinical records, primarily sufferers exhibit myocardial infarctions and Heart Failures (HF). Creatinine is a Musculo - skeletal waste product. The kidneys filter creatinine from the blood and excrete it through the urine in a healthy body. High creatinine levels can suggest renal problems. Elevated Serum Creatinine (SC) has been well established in the HF. Patients’ electronic medical records can be used to quantify symptoms and other related clinical laboratory test values, which would then be utilized to direct biostatistics exploration to uncover patterns and associations that doctors would otherwise miss. The latest American Heart Association guidelines for 1500 mg/d sodium tend to be sufficiently relevant for patients with stage A and B with HF. In this article, we used a dataset of the year 2015 of heart patients records of 299 patients. The present paper used the data analytic and statistical tools to verify the significant differences between alive and dead patients’ SC and Serum Sodium (SS). It also demonstrates the impact of significant features on abnormal SC and SS on the Survival-Status levels. The Age-Group feature, which is derived from age attribute and, Ejection Fraction (EF), anemia, platelets, Creatinine Phosphokinase (CPK), Blood-Pressure (BP), gender, diabetes, and smoking-status were utilized to determine the potential contributing features to mortality with Cox regression model. The Kaplan Meier plot was used to investigate the overall pattern of survival concerning age-group. During pre-processing of the dataset, Age and SS were removed due to multicollinear features during performing machine learning algorithms experiments. This paper also predicted patients’ survival, age group, and gender using supervised machine learning classifiers. Detection of significant features would help in making informed decisions to balance the lifestyle of heart patients. The author revealed that the patient’s follow-up months, as well as SC, EF, CPK, and platelets, are sufficient key features to predict heart patient survival using Random Forest (RF) stratified 10-fold CV method with accuracy (96%) with 5% Standard Deviation (SD) from medical records dataset. We identified the age-group and gender of the patient, and the RF model outperformed others with the best accuracy 96% and 94% in both cases having 11% SD. Also, prominent features such as CPK, SC, follow-up month, platelets, and ejection were found to be significant factors in predicting the patient’s age-group. Smoking habits, CPK, platelets, follow-up month, and SC of each patient were discovered to be significant predictors of patient gender. The hypothetical study proved that SC and SS making substantial differences in the survival of patients (p < 0.05) and failed to reject that anemia, diabetes, and BP making a significant impact on the creatinine and sodium of each patient (p > 0.05). With χ2(1) = 8.565, the Kaplan Meier plot revealed that mortality was high in the extremely elder age-group. The finding has possible effects on clinical practice and becomes a new medical support system when predicting whether a patient can survive a heart attack or not. The doctor should primarily concentrate on follow-up month, SC and EF, CPK, and platelet count since the aim is to understand whether a patient survives after HF.

Upon inbreeding, the architecture of the inbreeding load shifts as selection purges strongly deleterious recessive mutations and drift fixes many milder ones. Most small inbred populations show limited genetic variation while crosses between such populations commonly express pronounced heterosis, confirming fixation. In contrast, purging appears to be limited in that inbred populations often retain substantial inbreeding depression. In addition we have the enigma Darwin noted: purely selfing taxa are unknown. Because both purging and fixation reduce inbreeding depression and load, another mechanism must exist to sustain these. Background selection and the associations that develop among alleles in small inbred populations will shift the architecture of the load potentially creating blocks of recessive mutations linked in repulsion. This would generate pseudo-overdominance that could sustain these “PODs” and inbreeding load. Recombination and crosses between lineages could erode PODs. Crosses between populations fixed for different mutations would generate high pseudo-overdominance, enhancing heterosis and potentially POD formation. New recessive mutations arising within PODs would reinforce overdominance. PODs should generate clear genetic signatures including genomic hotspots of heterozygosity and linkage disequilibrium containing alleles at intermediate frequency generating segregating load. Results from several simulation and empirical studies match these predictions. Further simulations and comparative genomic analyses are needed to rigorously test whether PODs exist in sufficient strength and number to generate persistent inbreeding depression and load in inbred lineages.

COVID-19, caused by SARS-CoV-2, is responsible for widespread mortality and economic loss across almost 212 countries. The distribution of disease prevalence is, however, uneven and likely dependent on the range of human behavior and/or the pathogen and environmental variables. Here in this research we examined the correlation between daily and total COVID-19 case reports from Bangladesh and meteorological variables (average temperature, average humidity, and average wind speed) against one another using Spearman rank and Kendall correlation tests to highlight significant meteorological variables in relation to COVID-19. The tests revealed that both temperature and humidity had a non-significant correlation with COVID-19 transmission amid epicenter (EC) and non-epicenter (NEC) areas. However, a weak (KCC: 0.168, p < 0.05; SCC: 0.271, p < 0.05) correlation was found for temperature in ECs. Wind speed showed moderate to strong correlation in ECs with a very high statistical significance to both daily new cases [(KCC: 0.494, p < 0.01); (SCC: 0.689, p < 0.01)] and total cases [(KCC: 0.426, p < 0.01); (SCC: 0.617, p < 0.01)]. The COVID-19 transmission was found to have a weak (KCC: 0.354, p < 0.01) to moderate (SCC: 0.465, p < 0.01) correlation with daily new cases; however, a moderate (KCC: 0.497, p < 0.01) to strong (SCC: 0.712, p < 0.01) correlation with total cases was found in NECs. The results suggest that temperature and humidity have little influence on COVID-19 transmission, but wind speed may have some influence. Countries should prioritize social engineering to modify human behavior in order to combat the spread of COVID-19 and future pandemics.

The COVID-19 outbreak has severely affected the social and economic conditions across this globe. Little is known about the relationship of COVID-19 with countries’ economic and socio-demographic status. Publicly available data on COVID-19 test rate, attack rate, case fatality rate, and recovery rate were analyzed in relation to country’s economic status, population density, median age, and urban population ratio. We also conducted multinomial logistic regression analysis to predict the influence of countries’ social and economic factors on COVID-19. The results revealed that the median age had significant positive correlation with attack rate (r=0.2389, p=0.003), case fatality rate (r=0.3207, p=0.000) and recovery rate (r=0.4847, p=0.000). The urbanization has positive significant correlation with recovery rate (r=0.1957, p= 0.016). The multinomial logistic regression analysis revealed low-income countries are less likely to have an increased recovery rate (p=0.000) and attack rate (p=0.016) compare to high-income countries. The lower-middle-income and upper-middle-income countries are less likely to have an increased recovery rate (p=0.000 and p=0.001, respectively) compared to high-income countries. Based on the result of this study, these economic and socio-demographic factors should consider in designing appropriate preventive measures as a next step. The low and lower-middle-income countries should invest more in health care services to lower the case fatality rate and increase test and recovery rates as part of pandemic preparation like COVID-19. As the number of COVID-19 attacks, death and recovery rates are constantly changing; however, the intensive study is required to obtain a clear picture.

Image registration has an imperative role in medical imaging. In this work, a grey-wolf optimizer (GWO) based non-rigid demons registration is proposed to support the retinal image registration process. A comparative study of the proposed GWO-based demons registration framework with cuckoo search, firefly algorithm, and particle swarm optimization- based demons registration is conducted. In addition, a comparative analysis of different demons registration methods, such as Wang’s demons, Tang’s demons, and Thirion’s demons which are optimized using the proposed GWO is carried out. The results established the superiority of the GWO-based framework which achieved 0.9977 correlation, and fast processing compared to the use of the other optimization algorithms. Moreover, GWO-based Wang’s demons performed better accuracy compared to the Tang’s demons and Thirion’s demons framework. It also achieved the best less registration error of 8.36×10^-5.

This work evaluates the surface water quality in terms of physico-chemical parameters of the Brahmani River, Odisha using statistical analysis involving the calculation of correlation coefficient and regression equation. Besides this, the work also highlights and draws attention towards the “Water Quality Index” in a simplified format which may be used at large and could represent the reliable picture of water quality. Surface water quality data is taken from OSPCB of various location i.e. Panposh D/S, Rourkela D/S, Rengali, Talcher U/S, Kamalanga D/S, Bhuban, Pattamundai and was assessed for summer, monsoon, winter for the years 2011, 2012, 2013, 2014 and 2015. Average of values, minimum of values and maximum of values of water quality parameters were obtained seasonally over the above mentioned years. Besides this, the standard deviation for the water quality parameters was also obtained for water quality parameters namely pH, Temperature, DO, TDS, Alkalinity, EC, Na+, Ca2+, Mg2+, K+, F-, Cl-, NO3-, SO42- and PO42-. Seasonal changes in various physical and chemical parameters were analysed.The values obtained were compared with the guideline values for drinking water by Bureau of Indian Standard (BIS). A systematic correlation and regression study is carried out for three seasons, showed linear relationship among different water quality parameters. This provides an easy and rapid method of monitoring water quality. Highly significant (0.8< r <1.0), moderately significant (0.6< r <0.8) and significant (0.5< r <0.6) correlations between the parameters have been worked out. High correlation coefficient has been observed between TDS,EC-Na+, Ca2+, Cl-, SO42- ; Na+- Cl-. From the collected quantities, certain parameters were selected to derive WQI for the variations in water quality of each designated sampling site. WQI of Brahmani River ranged from 36.7 to 44.1 which falls in the range of good quality of water.Panposh D/S and Rourkela D/S showed poor water quality in summer and winter season. It is shown that WQI may be a useful tool for assessing water quality and predicting trend of variation in water quality at differentlocations in the Brahmani River.

Polyvinyl alcohol-engineering cementitious composites (PVA-ECC) has been widely applied in bridge deck repairing or widening, the common practice for doing this is that a portion of a bridge is left open to traffic while the closed portion is constructed, which expose the early age PVA-ECC to the vehicle-induced vibrations. However, whether vehicle-induced vibrations affect the tensile performance of early age PVA-ECC remains unknow. The purpose of this study was to conduct laboratory test programs on how much vehicle-induced vibrations during early ages affected the tensile performance of PVA-ECC. A self-improved device was used to simulate the vehicle-induced vibrations, and after vibrating with the designed variables, both a uniaxial tensile test and a grey correlation analysis were performed. The results indicated that: the effects of vehicle-induced vibrations on the tensile performance of early age PVA-ECC were significant, and they generally tended to be negative in this investigation. In particular, for all of the vibrated PVA-ECC specimens, the most negative age when vibrated occurred during the period between the initial set and the final set. We concluded that although vehicle-induced vibrations during the setting periods had no substantial effects on the inherent strain-hardening characteristics of PVA-ECC, the effects should not be ignored.

Modern gas turbines firing temperatures (1500-2000K) are well beyond the maximum allowable blade material temperatures. Continuous safe operation is made possible by cooling the HP turbine first stages -nozzle vanes and rotor blades- with a portion of the compressor discharge air, a practice that induces a penalty on the cycle thermal efficiency. Therefore, a current issue is to investigate the real advantage, technical and economical, of raising maximum temperatures much further beyond current values. In this paper, process simulations of a gas turbine are performed to assess HP turbine first-stage cooling effects on cycle performance. A new simplified and properly streamlined model is proposed for the non-adiabatic expansion of the hot gas mixed with the cooling air within the blade passage, which allows for a comparison of several cycle configurations at different TIT (turbine inlet temperature) and max (total turbine expansion ratio) with a realistically acceptable degree of approximation.. The calculations suggest that, at a given max, the TIT can be increased in order to reach higher cycle efficiency up to a limit imposed by the required amount and temperature of the cooling air. Beyond this limit, no significant gains in thermal efficiency are obtained by adopting higher max and/or increasing the TIT, so that it is convenient in terms of cycle performance to design at lower rather than higher max. The small penalty on cycle efficiency is compensated by lower plant cost. The results of our model agree with those of some previous much more complex and computationally expensive studies, so that the novelty of this paper lies in the original method adopted on which the proposed model is based, and in the fast, accurate and low resource intensity of the corresponding numerical procedure: all advantages that can be crucial for industry needs. The presented analysis is purely thermodynamic, with no investigation on the effects of the different configurations on plant costs, so that future work addressing a thermo-economic analysis of the air-cooled gas turbine power plant is the next logical step.

Wastewater-based epidemiology (WBE) has emerged as a key method for continuous monitoring of COVID-19 prevalence including circulating SARS-CoV-2 lineages. WBE addresses limitations of traditional clinical COVID-19 surveillance such as clinical test availability, fluctuating testing rates and increased reliance on rapid antigen tests. Our study in Perth, Western Australia, found a significant positive correlation between SARS-CoV-2 concentrations in wastewater and clinical PCR positivity rates (rs = 0.772; p < 0.001) over an 18-month period that included four successive COVID-19 waves. A strong positive correlation was apparent between the proportions of SARS-CoV-2 lineages in wastewater and clinical cases within the same region (rs = 0.728; p < 0.001), including earlier detection of Omicron and recombinant lineages in wastewater before clinical case confirmation. The successful integration of WBE with healthcare data underscores its critical role in enhancing public health decision-making and pandemic management. This approach not only demonstrates the value of WBE in current global health surveillance efforts but also highlights the potential of WBE to address future public health challenges, as a comprehensive disease monitoring and response approach.

This study aimed to identify changes in visitor behavior and visitor interest in healing forests before and after the COVID-19 pandemic. The study used text mining analysis techniques to identify changes in visitation behavior over time, divided into three periods: pre-COVID-19 (January 1 to December 31, 2019), during the COVID-19 pandemic (November 1, 2020 to October 31, 2022), and post-COVID-19 (November 1, 2022 to October 31, 2023 ). After the COVID-19 outbreak, healing forest use behavior did not regress to pre-COVID-19 levels. Activity-based keywords such as "hiking," "trekking," and "walking" stood out as the main drivers of this change in behavior. Therefore, related authorities must examine the scalability of the functions, services, and programs of healing forests from a general healing space to a space for leisure and tourism. These findings will contribute to the development of future marketing strategies and programs for healing forests.

Observations collected during cold season precipitation periods at Utquagvik, Alaska and at the mul-tidisciplinary drifting observatory for study of Arctic climate (MOSAiC) are used to statistically ana-lyze relations among the atmospheric water cycle parameters including the columnar supercooled liq-uid and ice amounts (expressed as liquid water and ice water paths, i.e., LWP and IWP), the integrated water vapor (IWV) and the near-surface snowfall rate. Data come from radar and radiometer-based retrievals and from optical precipitation sensors. While correlation between snowfall rate and LWP is rather weak, correlations coefficients between radar-derived snowfall rate and IWP are high (~ 0.8), which is explained, in part, by generally low LWP/IWP ratios during significant precipitation. Corre-lation coefficients between snowfall rate and IWV are moderate (~0.45). Correlations are generally weaker if snowfall is estimated by optical sensors, which is, in part, due to blowing snow. Correlation coefficients between near-surface temperature and snowfall rates are low (r<0.3). Results from the Alaska and MOSAiC sites are generally similar. These results are not very sensitive to the amount of time averaging (e.g., 15-minute averaging versus daily averages). Observationally-based relations among the water cycle parameters are informative about atmospheric moisture conversion processes and can be used for model evaluations.

Sierra Madre Mountain Range (SMMR) is the backbone of Luzon Islands that contains high concentration of highly important ecological resources distributed among the 68 protected areas therewith. The present study aimed to assess the tree species composition and diversity in a secondary forest within the SMMR. A 2.25-km transect with 10 900-m2 was established to record tree species with a diameter at breast height of at least 10 cm. The findings revealed 148 individuals of trees from 38 morphospecies, 28 genera, and 20 families. Importance values unveiled the Aurora endemic Macaranga stonei Whitmore as the most important species in terms of the relative values of its abundance, frequency, and dominance. The area was also found to be home for 33 natives, 12 endemics, five IUCN threatened species, and nine Philippine threatened trees. Furthermore, the study site was also found to have a considerably high diversity with Shannon Weiner Index value of 3.269 and a relatively even distribution of individuals among species supported by the Simpson’s Evenness index value of 0.9453. Significant correlational relationships were also found among species richness, Shannon Weinder index, and Simpson’s Evenness index with correlation coefficients ranging from 0.881 to .934 all significant at p < .001. Lastly, the study was able to produce a distribution map necessary in implementing targeted conservation strategies. These findings provided valuable implications for future research and implementation of targeted and participatory biodiversity conservation and protection strategies.

Due to the highly nonlinear, multi-stage, and strongly time-varying marine lysozyme fermentation process, it is difficult to assure the stability and prediction accuracy of the traditional single global soft sensor model on a global scale. This study innovatively proposed a soft sensor model based on an improved seagull optimization algorithm (ISOA) combined with Gaussian process regression (GPR) weighted ensemble learning. First, the sample data set is divided into multiple local sample subsets by the improved density peak clustering algorithm (ADPC). Second, the Gaussian process regression model is optimally altered with an improved seagull optimization algorithm for the purpose of establishing the corresponding sub-prediction model. Finally, the prediction model's fusion strategy is ultimately determined depending on the degree of connection between the test samples and a subset of local pieces. Simulation results show that the proposed soft sensor model, which searches GPR based on ISOA and combines various sub-models, can predict the key biochemical parameters of the marine lysozyme fermentation process better with less prediction error under the condition of fewer training data, and it can be expanded to the soft sensor models of general nonlinear systems, according to simulation results.

contaminated sites located in each school district. Previous studies showed that various environmental factors, such as exposure to toxic substances negatively impacts human health depending on their concentration and occurrence. Therefore, the study aims to use Geographical Information System (GIS) technology and secondary data on IEP numbers of each school district, chemical occurrence in contaminated sites, and demographic data to conduct a correlational analysis. The secondary data obtained from school districts and contaminated sites from Iowa Department of Natural Resources Facility Explorer were populated in ArcMap 10.5 (a GIS software) for generating maps and data to conduct statistical analysis. The contaminants were categorized into metals, polyaromatic hydrocarbons (PAH), and solvents with weighing factors as 1, 0.5, and 0.25. A total of 1 Superfund site and 39 CERCLA sites were identified as contaminated sites for this study. The majority of contaminants were heavy metals such as lead, arsenic, mercury, and cadmium. The mean toxic score of all contaminated sites combined was 13.4 (sd 14.4). The correlational analysis between the IEP numbers from each school districts and toxic scores from the contaminated sites was positive indicting that increased toxic score increased the number of students enrolled in the IEP program (F=23.7, p<0.0001). The correlational analysis between toxic score and demographics indicated some interesting results. Children under the age of 10 were living in areas with high toxic score and the showed mild correlation (p<0.00052). Similarly, higher number of black population resided in areas with high toxic score (p=0.0032) than the white population (p<0.0001). The result also indicated that children enrolled in IEP were predominantly among the black population (p<0.0001). The correlational analysis between household income and poverty percentage of people residing near the contaminated area indicated that people had low average household income (p=0.0002) and high poverty percentage (p=0.0203) residing in areas with higher toxic score. Regarding the educational status, less number of people with post graduate degree (p<0.0001) resided in areas with high toxic score and more number of people with no degree (p<0.0001) resided in areas with high toxic score. Finally, the study showed the increasing trend of eligible children enrolling in free and reduced lunch programs with increasing toxic scores (p=0.0012) and IEP levels (p=0.0416). This study emphasize on developing multiple exposure to correlate environmental factors contributing to the negative health outcome on people.

With the rapid development of the economy and the transformation of social contradictions, the economic development model in China has also changed, and a high-quality economic development model has been proposed. This paper uses the entropy method to measure the level of innovation and high-quality economic development in nine prefecture-level cities in Fujian Province from 2011 to 2020, and finds that the overall level shows an increasing trend year by year, but there are obvious regional differences. By constructing a grey correlation degree model, it is found that the innovation subsystem and the high-quality economic development are strongly correlated, the development level of innovation and the subsystem of high-quality economic development are both strongly correlated, the grey correlation degree from high to low is green, coordinated, shared, and livelihood, indicating that innovation has a significant impact on high-quality economic development. Based on the research results, countermeasures and suggestions are proposed to promote the coordinated development of innovation and high-quality economy.

For a long time, there has been interest in the relationship between personality traits and life satisfaction. However, many previous studies suffer from small sample sizes or selective sampling, sometimes leading to biased or imprecise results. The current study, which focuses on the trait of extraversion, attempts to overcome these limitations by using a large-scale German survey of more than 40,000 individuals aged 10 to 72. As the descriptive and regression results clearly show, there is a statistically significant relationship between extraversion and several dimensions of current life satisfaction. Depending on the type of satisfaction, the unstandardized regression coefficients range from 0.18 to 0.33. To gain further insight, age is added as an explanatory variable to test whether these associations change as a person ages. The results show that the effect sizes sometimes differ by age but remain robust and statistically significant. In conclusion, the study adds to the literature by providing convincing evidence that extraversion and life satisfaction are positively associated, at least in Western and industrialized countries, and that there are interaction effects with age.

Large structures such as wind turbines are subject to environmental factors and varying operational loads which may result in structural damage, making components of these large structures prone to performance and mechanical degradation. The use of high-definition optical vision sensors in digital image correlation (DIC) allow for the application of a non-destructive image registration technique in which it measures finite three-dimensional deformations on surfaces through correlations of a unique pattern or set of unique localized patterns. However, the physical placement of an artificial marker such as a unique speckled pattern on the surface of the structure is time-consuming and often impractical for large structures. Therefore, we propose a novel auto-mated methodology that searches and segments salient and unique regions of an image as well as for all subsequent images to assist in performing efficient displacement measurements for vibrational study and structural health monitoring purposes. Our algorithm is validated on a con-trolled set of images, as well as on a small structure and large real-world wind turbine, which suggests the algorithm’s efficacy without the use of artificial markers for large structural health monitoring.

Nutrient regulation in aquaponic environments has been the topic of research for many years. Most have focused on appropriate control of nutrients in an aquaponic set-up, but very little research has been done on commercial scale applications. In our model, the input data was sourced on a weekly basis from three commercial aquaponic farms in South-East Texas over the course of a year. Due to limited number of data points, dimensionality reduction techniques like pair-wise correlation matrix was used to remove the highly correlated predictors. Feature selection techniques like the XGBoost classifier and Recursive Feature Elimination with ExtraTreesClassifier were used to rank the features in order of their relative importance. Ammonium and calcium were found to be the top two nutrient predictors and based on the months in which lettuce was cultivated, the median of these nutrient values from the historical dataset served as the optimal concentrations to be maintained in the aquaponic solution. To accomplish this, Vernier sensors were used to measure the nutrient values and actuator systems were built to dispense the appropriate nutrient into the ecosystem via a closed loop.

The article reviews the constituent’s physico-chemical parameters in the water of the Mansagar Lake of the Jaipur City. The water quality is also investigated using evaluated physico-chemical parameters with in-depth study of their distribution as per sample location-wise and season-wise. A detailed discussion on the associationship among parameters (pH, Conductivity, turbidity, dissolved Oxygen, chemical and Biochemical Oxygen demand, etc.) using the Pearson’s analytical method is also presented. The strength of the article is the graphical presentation of evaluated physico-chemical parameters and the water quality indices for sample station-wise and the season-wise. To our best of understanding, first time such details have been clubbed together and discussion in brief for studied lake.

The Amoebic Self Theory is a concept of the social psychology, which postulates that humans have a psychological boundary. As the authors of the concept propose [1], the function of the boundary is to allow psychological separation of one from the others. In this study, we examined how sen-sitivity to violation of the boundary, measured by an amoebic self scale, is connected with differ-ent types of procrastination sensu lato, measured by seven procrastination subscales. Only two of the seven procrastination aspects, i.e. the preference for pressure and outcome satisfaction, were negatively and significantly related to the spatial-symbolic domain of the amoebic self scale. The other purpose of this research was to examine the connection between the students’ grade point average (GPA) and scores obtained in the procrastination subscales. Only the non-adaptive aspect of procrastination predicted significantly the GPA. That is an important detail, because pointing out the gap between one’s self-opinion and the real, non dependent of the opinion, academic achievement. All these findings were considered in the academic context and consequences of these results were discussed.

Tomato is exposure to diverse abiotic stresses. Cold stress is one of harsh environmental stresses and abnormal low temperature affects tomato growth and development including physio- logical disorders, flower drops, and abnormal fruit morphology, causing the decrease of tomato yield and a fruit quality. It is important to identify low temperature-(LT) tolerant tomato (Solanum lycopersicum L.) cultivars relying on different fruit types. This study focused on analyzing physiological traits of 35 tomato accessions with three different fruit types (cherry, medium, and large sizes) under night temperature set-points of 15°C for normal temperature (NT) and 10°C for LT, respectively. Plant heights (PH) of most tomato accessions in LT were remarkably decreased compared to those in NT. The growth of leaf length (LL) and leaf width (LW) was reduced depending on the genotypes under LT. In addition, the number of fruits (NFR), fruit set (FS), fruit yield (FY), and marketable yield (MY) were negatively affected in LT. The variation was further investigated by the correlation analysis, the principal component (PCA), and the cluster analysis. Interestingly, positive correlations between different vegetative and reproductive traits were uncovered. Multivariate analysis including the PCA and hierarchical clustering classified LT-treated 35 tomato accessions into four major groups. The identified accessions were associated with vegetative and reproductive parameters on positive directions and might be utilized for breeding programs on selecting LT-tolerant cultivars.

Our understanding of pull-apart basins and their fault systems has been enhanced by analog experiments and simulations. However, there has been no opportunity to compare the faults that constitute pull-apart basins with surface ruptures during earthquakes. In this study, we investigated the effects of a 2018 earthquake (Mw 7.5) on a pull-apart basin in the Palu-Koro fault system, Sulawesi Island, Indonesia, using geomorphic observations in digital elevation models, optical correlation with pre- and post-earthquake satellite images. A comparison of active fault traces determined by geomorphology with the locations of surface ruptures from the 2018 earthquake shows that some of the boundary faults of the basin are inactive and that active faulting has shifted to basin-shortcut faults and relay ramps. We also report evidence of lateral spreading, in which alluvial fan materials moved around the end of the alluvial fan. These phenomena may provide insights for anticipating the location of future surface ruptures in pull-apart basins.

This study introduces a comparative analysis of two deep learning (multilayer perceptron neural networks (MLP-NN) and the long short term memory networks (LSTMN)) models for transit travel time prediction. The two models were trained and tested using one-year worth of data for a bus route in Blacksburg, Virginia. In this study, the travel time was predicted between each two successive stations to all the model to be extended to include bus dwell times. Additionally, two additional models were developed for each category (MLP of LSTM): one for only segments including controlled intersections (controlled segments) and another for segments with no control devices along them (uncontrolled segments). The results show that the LSTM models outperform the MLP models with a RMSE of 17.69 sec compared to 18.81 sec. When splitting the data into controlled and uncontrolled segments, the RMSE values reduced to 17.33 sec for the controlled segments and 4.28 sec for the uncontrolled segments when applying the LSTM model. Whereas, the RMSE values were 19.39 sec for the controlled segments and 4.67 sec for the uncontrolled segments when applying the MLP model. These results demonstrate that the uncertainty in traffic conditions introduced by traffic control devices has a significant impact on travel time predictions. Nonetheless, the results demonstrate that the LSTMN is a promising tool that can has the ability to account for the temporal correlation within the data. The developed models are also promising tools for reasonable travel time predictions in transit applications.

Bohrnstedt’s (1969) attempt to derive a formula to compute the partial correlation coefficient and simultaneously correct for attenuation sought to simplify the process of performing each task separately. He suggested that his formula, developed from algebraic and psychometric manipulations of the partial correlation coefficient, produces a corrected partial correlation value. However, an algebraic error exists within his derivations. Consequently, the formula proposed by Bohrnstedt does not appropriately represent the value he intended it to estimate. By correcting the erroneous step and continuing the derivation based upon his proposed procedure, the steps outlined in this paper ultimately produce the formula that Bohrnstedt desired.

Two opposed p–n diodes are connected with another junction that causes cancellation of the electric field in the depletion layer of each diode by the field of the other diode. This derived quantum diode is called the A system. Another dual diode, constructed by the same process but with the p- and n-types positioned as duality, called the B system. When a bias voltage is applied between the A and B systems, Lorentz conservation imparts a momentum (i.e., a wave number) to the carriers in the absence of any internal voltage. Thus, a superconducting bias current density appears without the need for cooling. The reappearances of electron–hole pairs on the junction surfaces are assumed to be described by entire wavefunctions normalized by the band gap. Based on the bias superconducting current, NOT and NAND gates were constructed from the quantum diode systems. Numerical calculations revealed that the constant phases of the entire wavefunctions of the p-and n-types converged. Accordingly, it was clarified that Bose–Einstein condensation and the Meissner effect (described by the London equation) occurred in the quantum diode systems. Moreover, the systems exhibited rectification characteristics and a switching speed of the order of 10^-14 s. Combining this switching property with the large bias superconducting current (of the order of several V), we developed NOT and NAND gates with direct quantum correlations among many qubits, which are unaffected by random and thermal noises. These gates have memorization and initialization properties and are compatible with existing and accumulating programing algorithms. Moreover, when harvesting a divergent current output from these systems, the bias superconducting current and memorization property preserve the formed quantum correlations.

Αbstract: To date, countless satellite image fusions have been made, mainly with panchromatic spatial resolution to a multispectral image ratio of 1/4, fewer fusions with lower ratios, and relatively recently fusions with much higher spatial resolution ratios have been published. Apart from this, there is a small number of publications studying the fusion of aerial photographs with satellite images, with the year of image acquisition varying and the dates of acquisition not mentioned. In addition, in these publications, either no quantitative controls are performed on the composite images produced, or the aerial photographs are recent and colorful and only the RGB bands of the satellite images are used for data fusion purposes. The objective of this paper is the study of the addition of multispectral information from satellite images to black and white aerial photographs of the 80s decade (1980–1990) with small difference (just a few days) in their image acquisition date, the same year and season. Quantitative tests are performed in two case studies and the results are encouraging, as the accuracy of the classification of the features and objects of the Earth’s surface is improved and the automatic digital extraction of their form and shape from the archived aerial photographs is now allowed. This opens up a new field of use for the black and white aerial photographs and archived multispectral satellite images of the same period in a variety of applications, such as the temporal changes of cities, forests and archaeological sites.

The feasibility of a steady-state visual evoked potential (SSVEP) brain-computer interface (BCI) with a single flicker stimulus for multiple-target decoding has been demonstrated in a number of recent studies. The single-flicker BCIs have mainly employed the direction information for encoding the targets, i.e. different targets are placed at different spatial directions relative to the flicker stimulus. The present study explored whether visual eccentricity information can also be used to encode target for the purpose of increasing the number of targets in the single-flicker BCIs. A total number of 16 targets were encoded, placed at eight spatial directions, and two eccentricities (2.5° and 5°) relative to a 12 Hz flicker stimulus. Whereas distinct SSVEP topographies were elicited when participants gazed at targets of different directions, targets of different eccentricities were mainly represented by different signal-to-noise ratios (SNRs). Using a canonical correlation analysis-based classification algorithm, simultaneous decoding of both direction and eccentricity information was achieved, with an average offline 16-class accuracy of 66.8±16.4% averaged over 12 participants and a best individual accuracy of 90.0%. Our results demonstrate a single-flicker BCI with a substantially increased target number towards practical applications.

We propose a methodology for the quantification of model risk in the context of credit derivatives pricing and CVA, where the uncertain or unmodelled parameter is often the correlation between rates and credit. We take the rates model to be Hull-White (normal) and the credit model to be Black-Karasinski (lognormal). We show how highly accurate analytic pricing formulae, hitherto unpublished, can be derived for CDS and extended to address instruments with defaultable Libor flows which may in addition be capped and/or floored. We also consider the pricing of a contingent CDS with an interest rate swap underlying. We derive explicit expressions showing how to good accuracy the dependence of model prices on the uncertain parameter(s) can be captured in analytic formulae which are readily amenable to computation without recourse to Monte Carlo or lattice-based computation. In so doing, we take into account the impact on model calibration of the uncertain (or unmodelled) parameter.

During the high-speed flight of a vehicle in the atmosphere, surface friction with the air generates aerodynamic heating. The aerodynamic heating phenomenon can create extremely high temperatures near the surface. These high temperatures impact material properties and the structure of the aircraft, so thermal deformation measurement is essential in aerospace engineering. This paper revisits high-temperature deformation measurement using the digital image correlation (DIC) technique under high-intensity blackbody radiation with a precise speckle pattern fabrication and a heat haze reduction method. The effect of speckle pattern on the DIC measurement has been thoroughly studied at room temperature, but high-temperature measurement studies have not reported such effects so far. We found that the commonly used methods to reduce the heat haze effect could produce incorrect results. Hence, we propose a new method to mitigate heat haze effects. An infrared radiation heater was employed to make an experimental setup that could heat a specimen up to 950 ℃. First, we mitigated image saturation using a short-wavelength bandpass filter with blue light illumination, a standard procedure for high-temperature DIC deformation measurement. Second, we studied how to determine the proper size of the speckle pattern under a high-temperature environment. Third, we devised a reduction method for the heat haze effect. As proof of the effectiveness of our developed experimental method, we successfully measured the deformation of stainless steel 304 specimens from 25 ℃ to 800 ℃. The results confirmed that this method can be applied to the research and development of thermal protection systems in the aerospace field.

The work presented in this paper makes multiple scientific contributions with a specific focus on the analysis of misinformation about COVID-19 on YouTube. First, the results of topic modeling performed on the video descriptions of YouTube videos containing misinformation about COVID-19 revealed four distinct themes or focus areas - Promotion and Outreach Efforts, Treatment for COVID-19, Conspiracy Theories regarding COVID-19, and COVID-19 and Politics. Second, the results of topic-specific sentiment analysis revealed the sentiment associated with each of these themes. For the videos belonging to the theme of Promotion and Outreach Efforts, 45.8% were neutral, 39.8% were positive, and 14.4% were negative, for the videos belonging to the theme of Treatment for COVID-19, 38.113% were positive, 31.343% were neutral, and 30.544% were negative, for the videos belonging to the theme of Conspiracy Theories regarding COVID-19, 46.9% were positive, 31.0% were neutral, and 22.1% were negative, and for the videos belonging to the theme of COVID-19 and Politics, 35.70% were positive, 32.86% were negative, and 31.44% were negative. Third, topic-specific language analysis was performed to detect the various languages in which the video descriptions per topic were published on YouTube. This analysis revealed multiple novel insights. For instance, for all the themes, English and Spanish were the most widely used and second-most widely used languages, respectively. Fourth, the patterns of sharing these videos on other social media channels such as Facebook and Twitter were also investigated. The results revealed that videos containing video descriptions in English were shared the highest number of times on Facebook and Twitter. Finally, correlation analysis was performed by taking into account multiple characteristics of these videos. The results revealed that the correlation between the length of the video title and the number of Tweets as well as the correlation between the length of the video title and the number of Facebook posts was statistically significant.

Phage therapeutics offer a potentially powerful approach to combat multidrug-resistant bacterial infections. However, to be effective, phage therapy must overcome existing and developing phage resistance. While phage cocktails can reduce this risk by targeting multiple receptors in a single therapeutic, bacteria have mechanisms of resistance beyond receptor modification. A rapidly growing body of knowledge describes a broad and varied arsenal of antiphage systems encoded by bacteria to counter phage infection. We sought to understand the types and frequencies of antiphage systems present in a highly diverse panel of Pseudomonas aeruginosa clinical isolates utilized to characterize novel antibacterials. Using web-server tool PADLOC (Prokaryotic Antiviral Defense Locator), putative antiphage systems were identified in these P. aeruginosa clinical isolates based on sequence homology to a validated and curated catalog of known defense systems. Coupling this host bacterium sequence analysis with host range data for 70 phages, we observed a correlation between existing phage resistance and the presence of higher numbers of antiphage systems in bacterial genomes. We were also able to identify antiphage systems that were more prevalent in highly phage-resistant P. aeruginosa strains, suggesting their importance in conferring the resistance.

Poa crymophila is a perennial, cold-tolerant, native grass species, widely distributed to the Qing-hai-Tibet Plateau. However, the molecular mechanism behind the cold stress tolerance and role of key regulatory genes and pathways of P. crymophila are poorly understood yet. Therefore, the present study investigated the physiological and transcriptome responses of P. crymophila’s roots, stems, and leaves under cold stress to explore the molecular mechanism of cold tolerance. Results of the present study suggested that cold stress significantly changed the physiologic characteristics of roots, stems, and leaves of P. crymophila. In addition, the transcriptome results showed that 4434, 8793, and 14942 differentially expressed genes (DEGs) were identified in roots, stems, and leaves, respectively; however, 464 DEGs were commonly identified in these three tissues. The Gene On-tology (GO) results showed that a large numbers of DEGs were significantly enriched in the pho-tosynthetic related categories in leaves. In addition, the “response to stimulus” category was sig-nificantly enriched in roots and stems. The Kyoto Encyclopedia of Genes and Genomes (KEGG) results showed that DEGs involved in “phenylpropanoid biosynthesis” were significantly enriched in roots, “photosynthesis” and “circadian rhythm-plant” pathways significantly enriched in stems and leaves, starch and sucrose metabolism, and galactose metabolism were pathways significantly enriched in three tissues. Weighted gene coexpression network analysis (WGCNA) identified Hub genes involved in P. crymophila cold response. This study provides new insights into the molecular mechanisms underlying the cold tolerance of P. crymophila belowground and aboveground tissues. In addition, specific genes involved in Ca2+ signaling, ROS scavenging system, hormones, circadian clock, photosynthesis, and transcription factors (TFs) were identified in P. crymophila. The identi-fication of key genes may provide valuable resources for further functional genomic and breeding studies.

Urban morphology exhibits fractal characteristics, which can be described by multifractal scaling. Multifractal parameters under positive moment orders primarily capture information about cen-tral areas with relatively stable growth, while those under negative moment orders mainly reflect information about marginal areas with more active growth. However, effectively utilizing mul-tifractal spectrums to uncover the spatio-temporal variations of urban growth remains a challenge. To addresses this issue, this paper proposes a multifractal measurement by combining theoretical principles and empirical analysis. To capture the difference between growth stability in central areas and growth activity in marginal areas, an index based on generalized correlation dimension Dq is defined. This index takes the growth rate of Dq at extreme negative moment order as the numerator, and that at extreme positive moment order as the denominator. During the stable stage of urban growth, the index demonstrates a consistent pattern over time. While during the active stage, the index may exhibit abnormal fluctuations or even jumps. This indicates that the index can reveal spatio-temporal information about urban evolution that cannot be directly observed through multifractal spectrums alone. By integrating this index with multifractal spectrums, we can more comprehensively characterize the evolutionary characteristics of urban spatial structure.

The inverse Finite Element Method (iFEM) is a model-based technique to compute the displacement (and then the strain) field of a structure from strain measurements and a geometrical discretization of the same. Different literature works exploit the error between the numerically reconstructed strains and the experimental measurements to perform damage identification in a Structural Health Monitoring framework. However, only damage detection and localization are performed, without attempting a proper damage size estimation. The latter could be based on machine learning techniques, however, an a priori definition of the damage conditions would be required. To overcome these limitations, the present work proposes a new approach in which the damage is systematically introduced in the iFEM model to minimize its discrepancy with respect to the physical structure. This is performed with a maximum likelihood estimation framework, where the most accurate damage scenario is selected among a series of different models. The proposed approach is experimentally verified on an aluminum plate subjected to fatigue crack propagation, which enables the creation of a Digital-Twin of the structure itself. The strain field fed to the iFEM routine is experimentally measured with an Optical Backscatter Reflectometry fiber and the methodology is validated with independent observations of lasers and the Digital Image Correlation.

The water quality of the river is becoming deteriorated due to human interference. It is essential to understand the relationship between human activities and land-use types to assess the water quality of a region. GIS has the latest tool for analyzing the spatial correlation. Land use land cover and change detection is the best illustration to show the human interactions on land features. The study assessed water quality index of upper Ganga River near Haridwar, Uttarakhand and spatially correlated them with changing land use to reach a logical conclusion. At the upper course of Ganga along 78 Km long from Kaudiyala to Bhogpur, water samples were collected from five stations. For water quality index the physicochemical parameters like pH, EC, DO, TDS, CaCO3-, CaCO3, Cl¯, Ca++, Mg++, Na+, K+, F-, Fe2+ were considered. The result of the spatial analysis was evaluated through error estimation and spatial correlation. The root mean square error between spatial land use and water quality index of selected sampling sites was estimated as 0.1443. The spatial correlation between land-use change and site-wise differences in water quality index has also shown a high positive correlation with R² = 0.8455. The degree of positive correlation and root mean square error has strongly indicated that the water quality of the river at the upper course of Ganga is highly impacted through human activities.

Energy harvesting from wind turbines has been explored by researchers for more than a century from conventional turbines up to the latest bladeless turbines. Amongst these bladeless turbines, vortex bladeless wind turbine (VBT) harvests energy from oscillation of a turbine body. Due to the novelty of this science and the widespread researches around the world, one of the most important issues is to optimize and predict produced power. To enhance the produced output electrical power of VBT, the fluid-solid interactions (FSI) were analyzed to collect a dataset for predicting procedure. Long short-term memory (LSTM) method has been used to predict the produced power of VBT from the collected data. The reason of choosing LSTM from various artificial neural network methods is that the parameters of VBT study are all time- dependent and the LSTM is one of the most accruable algorithms for predicting time series data. In order to find the relationship between the parameter and the variables used in this research, a correlation matrix was presented. According to the value of 0.3 for the root mean square error (RMSE), a comparative analysis between the simulation results and its prediction shows that the LSTM method is very accurate for these types of research. Furthermore, the LSTM method has significantly reduced the computation time so that the prediction time of desired values has been reduced from an average of 2 and a half hours to two minutes. Also, one of the most important achievements of this study is to suggest a mathematical relation of VBT output power which helps to extend it in a different size of VBT with a high range of parameter variations.

The study takes into account different classes of tunnel boring machines (TBMs), with the aim of identifying correlation models which are meant to estimate, at a preliminary design phase, the construction time of a tunnel and to evaluate the mechanical and operational parameters of the TBMs, starting from the knowledge of the tunnel length and/or the excavation diameter. To achieve this goal, first of all a database was created, thanks to the collection of the most meaningful technical parameters from a large number of tunnels; afterward, it was statistically analysed through Microsoft Excel. In a first phase, forecasting models were identified for the three types of machines investigated, separately for compact rocks (open TBM) and fractured rocks (single and double shield TBM). Then, the mechanical parameters collected through the database were analysed, with the aim of obtaining models that take into account, in addition to the type of TBM, the geological aspect, and the type of rock characterising the rock mass. Finally, the validation of the study was proposed in a real case, represented by the Moncenisio base tunnel, a work included in the new Turin–Lyon connection line. The estimated values were compared with the real ones, in order to verify the accuracy of the experimental models identified.

Information overload is the biggest challenges nowadays for any website, especially the e-commerce website. However, this challenge arises for the fast growth of information on the web (WWW) with easy access to the internet. Collaborative filtering based recommender system is the most useful application to solve the information overload problem by filtering relevant information for the users according to their interests. But, the existing system faces some significant limitations like as data sparsity, low accuracy, cold-start and malicious attacks. To alleviate the mentioned issues, the relationship of trust incorporates in the system where it can be between the users or items, and such system is known as the trust-based recommender system (TBRS). From the user perspective, the motive of the TBRS is to utilize the reliability between the users to generate more accurate and trusted recommendations. However, the aim of the paper is to present a comparative analysis of different trust metrics in the context of the type of trust definition of TBRS. Also, the study accomplishes on twenty-four trust metrics in terms of the methodology, trust properties &amp; measurement, validation approaches, and the experimented dataset.

COVID-19 emerged in Wuhan and is later declared as a pandemic by World Health Organization. Different-aged people have varying gender-wise immunity control properties that necessitates understanding COVID-19 impact on age and gender which does not exist, currently. In this paper, COVID-19 surveillance variables are extensively studied along with hospitalization, tests-performed, and recovery data. Dataset is curated from three sources; however, age and gender data belong to Belgium, particularly. Visualizations, frequencies, Pearson’s and polyserial correlation, student’s t-test, and Cramer’s V are used for enhanced analysis. Results show higher mortality rate in males and need of more ventilators to combat severe symptoms.

The novel COVID-19 disease is a contagious acute respiratory infectious disease whose causative agent has been demonstrated to be a new virus of the coronavirus family, SARS- CoV-2. Multiple studies have already reported that risk factors for severe disease include older age and the presence of at least one of several underlying health conditions. However, a recent physiopathological report and the French COVID-19 scientific council have postulated a protective effect of tobacco smoking. Thanks to a meta-analysis, we have been able to demonstrate the statistical significance in this regard of twelve series from China, France and in the US, reporting three different smoking status (current smoker,former smoker, with a smoking history) as well as disease severity (with respectively odds-ratio of 1.78 [1.08-3.10], 4.60 [3.13-7.17], 2.74 [0.63-5.89]). Subsequently and using a Bayesian approach we have established that past, and present smoking is associated with more severe COVID-19 outcomes. Finally, we refute claims linking general population smoking status (N=O(10^8) or O(10^9)) to much smaller disease course series (N=O(10^4)). The latter point in particular is presented to stimulate academic discussion, and must be further investigated by well-designed studies.

This work proposes a novel methodology for the complete characterization of fiber reinforced concrete (FRC). The method includes bending tests of prismatic notched specimens, based on the Standards for FRC, tensile and pure shear tests. The values adopted by the standards for designing FRC are the obtained from bending tests, typically fR3, even for shear and pure tension loading. This paper shows that the remaining strength of FRC, supplied by the fibers, depends on the type of loading. In the case of shear and tensile loading the prescriptions of the standards may be unsafe. In this work, the remaining halves of specimens subjected to bending test are prepared and used for shear and tension tests. This means significant savings in specimen preparation and a greater amount of information for structural use of FRC. The results provide relevant information for the design of structural elements of FRC compared with the only use of data supplied by bending tests. In addition, a video-extensometry system was used to analyze the crack generation and cracking patterns. The video-extensometry applied to shear tests allowed the assessment of the sliding values and crack opening values at the crack discontinuity. These values may be quite relevant for the study of the FRC behavior when subjected to shear according to the shear-friction model theories.

The novel coronavirus pneumonia (COVID-19) is a contagious acute respiratory infectious disease whose causative agent has been demonstrated to be a novel virus of the coronavirus family, SARSCoV-2. A recent pre-print study has showed a heme attack on the 1-beta chain of hemoglobin by COVID19. Beta-thalassemia results of a default in the hemoglobin beta- chain synthesis. 1,5% global population are heterozygotes for this disease. In this study, by a multiple linear regression, we have analyzed the evolution of COVID-19 infection in three Italian regions (Puglia, Sardinia, Sicilia) with different beta-thalassemic prevalences, in order to search a link. The results have showed that betathalassemic heterozygote population prevalence is correlated to immunity against COVID-19, by a regression. This paper is only for academic discussion, the hypotheses and conclusions needs to be confirmed by further research .

North and West Africa are the most vulnerable regions to drought, due to the high variation in monthly precipitation. An accurate and efficient monitoring of drought is essential. In this study, we use TRMM data with remote sensing tools for effective monitoring of drought. The Drought Severity Index (DSI), Temperature Vegetation Drought Index (TVDI), Normalized Difference Vegetation Index (NDVI), and Normalized Vegetation Supply Water Index (NVSWI) are more useful for monitoring the drought over North and West Africa. To classify the areas affected by drought, we used the TRMM spatial maps to verify the TVDI, DSI and NVSWI indexes derived from MODIS. The DSI, TVDI, NVSWI and Monthly Precipitation Anomaly (NPA) indexes with the employ of MODIS-derived ET/PET and NDVI were chosen for monitoring the drought in the study area. The seasonal spatial correlation between the DSI, NPA, NVWSI, NDVI, TVDI and TCI indicates that NVSWI, NDVI and DSI present an excellent monitor of drought indexes. The change trend of drought from 2002 to 2018 was also characterized. The frequency of drought showed a decrease during this period.

This article presents a comprehensive framework for valuing financial instruments subject to credit risk. In particular, we focus on the impact of default dependence on asset pricing, as correlated default risk is one of the most pervasive threats in financial markets. We analyze how swap rates are affected by bilateral counterparty credit risk, and how CDS spreads depend on the trilateral credit risk of the buyer, seller, and reference entity in a contract. Moreover, we study the effect of collateralization on valuation, since the majority of OTC derivatives are collateralized. The model shows that a fully collateralized swap is risk-free, whereas a fully collateralized CDS is not equivalent to a risk-free one.

The purpose of the present study is to explore the linkage between Hazardous Road Locations-based crash counts and a variety of geometric characteristics, roadway characteristics, traffic flow characteristics and spatial features in the region of Sousse, Tunisia. For this purpose, collision data was collected from at 52 hazardous road sections including 1397 crash records for a 11-year monitoring period from January 1, 2004 to December 31, 2014 obtained from National Observatory for Information, Training, Documentation and Studies on Road Safety in Tunisia (NOITDRS). The matrix of Pearson correlation was used in order to avoid inclusion of both variables, which were highly correlated. Both the Random Effects Negative Binomial model and the Negative Binomial model were estimated. To evaluate the models, the Random Effect Negative Binomial model improves the goodness-of-fit compared to the Negative Binomial model. Average Daily Traffic volume, Curved alignment, Presence of public lighting, Visibility, Number of lane, Presence of vertical/horizontal sign, Presence of rural segment, Presence of drainage system, Roadway surface condition, Presence of paved shoulder and presence of major road were found as significant variables influencing accident occurrences. Overall, the current research contributes to the literature from empirical, modeling methodological standpoints since it was the first study conducted in Tunisia to use crash prediction models for hazardous road locations, and that portrays Tunisian reality. The research findings present advantageous insights on hazardous road locations in the region of Sousse, Tunisia and present useful planning tools for public authorities in Tunisia.

Human-to-animal SARS-CoV-2 transmission was observed, including a veterinarian contracting COVID-19 through close contact with an infected cat, suggesting an atypical anthropozoonotic transmission. This study investigated the prevalence of SARS-CoV-2 antibodies in cats during human outbreaks and elucidated the correlation between cat infections and human epidemics. A total of 1,107 cat sera samples were collected and screened for SARS-CoV-2 antibodies using a modified indirect ELISA human SARS-CoV-2 antibodies detection kit. The samples were confirmed using a cPass surrogate viral neutralization assay. The SARS-CoV-2 seropositivity rate was 22.67% (199/878), mirroring the trend observed in concomitant human case numbers. The waves of an epidemic and provinces did not significantly impact ELISA-positive cat. Notably, Chon Buri ex-hibited a strong positive correlation (r = 0.99, P = 0.009) between positive cat sera and reported human case numbers. Additionally, cPass surrogate viral neutralization revealed a 3.99% (35/878) seropositivity rate. While there were significant differences in positive cat numbers and proportions between epidemic waves. In Samut Sakhon, a positive correlation (r = 1, P = 0.042) was noted between the proportion of positive cat sera and reported human cases. The findings emphasize the need for ongoing surveillance to comprehend SARS-CoV-2 dynamics in both human and feline populations.

Artificial intelligence algorithms have gained widespread adoption in the field of air conditioning load prediction. However, their prediction accuracy is substantially influenced by the quality of training samples. Training samples that lack relevance to the predicted moments can introduce interference into the neural network's learning process, potentially leading to a state of local convergence during its iterative process. This, in turn, diminishes the robustness and generalization capabilities of the prediction model. To enhance the prediction accuracy of air conditioning load prediction models based on artificial intelligence algorithms, this study presents an artificial intelligence algorithm prediction model based on the method of sample similarity sample screening. Initially, the comprehensive similarity coefficient between samples is computed using the gray correlation analysis method, enriched with enhancements in information entropy. Subsequently, a subset of closely related samples is extracted from the original dataset and employed as the training dataset for the artificial intelligence prediction model. Finally, the trained artificial intelligence algorithm prediction model is deployed for air conditioning load prediction. The results illustrate that the method of screening training samples based on sample similarity effectively improves the prediction accuracy of BP neural network (BPNN) and extreme learning machine (ELM) prediction models. However, it is important to note that this approach may not be suitable for genetic algorithm BPNN (GABPNN) and support vector regression (SVR) models.

To study the heat and mass transfer characteristics of an evaporative cooler for cooling high-temperature working fluids such as supercritical carbon dioxide, an experimental device of the evaporative cooler was built, and a corresponding test system was constructed. Then, the experimental study was carried out based on the orthogonal test method, and the law and extent of the influence of water flow in the tube, spray water flow rate, inlet water temperature in the tube, and air flow rate on heat dissipation, cooling efficiency, and heat and mass transfer coefficients have been obtained. The correlation equations of the heat and mass transfer coefficients were obtained by fitting the orthogonal experimental data, and the validity of the correlation equations was confirmed by the verification experiment.

The performance of bearings plays a pivotal role in determining the dependability and security of rotating machinery. In intricate systems demanding exceptional reliability and safety, the ability to accurately forecast fault occurrences during operation holds profound significance. Such predictions serve as invaluable guides for crafting well-considered reliability strategies and executing maintenance practices aimed at enhancing reliability. In order to ensure the reliability of bearing operation, this article investigates the application of three advanced techniques—Maximum Correlation Kurtosis Deconvolution (MCKD), Multi-Scale Permutation Entropy (MPE), and Long Short-Term Memory (LSTM) recurrent neural networks—for the prediction of the remaining useful life (RUL) of rolling bearings. Each technique's principles, methodologies, and applications are comprehensively reviewed, offering insights into their respective strengths and limitations. Case studies and experimental evaluations are presented to assess their performance in RUL prediction. Findings reveal that MCKD enhances fault signatures, MPE captures complexity, and LSTM excels in modeling temporal patterns. The root mean square error of the prediction results is 0.007. The fusion of these techniques offers a comprehensive approach to RUL prediction, leveraging their unique attributes for more accurate and reliable predictions.

The nonlocality (superdiffusion) of turbulence is expressed in the empiric Richardson t3 scaling law for the mean square of the mutual separation of a pair of particles in a fluid or gaseous medium. The development of the theory of nonlocality of various processes in physics and other sciences based on the concept of Lévy flights resulted in the idea of Shlesinger and colleagues about the possibility of describing the nonlocality of turbulence using a linear integro-differential equation with a slowly falling kernel. The close approach developed by us made it possible to establish the closeness of the superdiffusion parameter of plasma density fluctuations moving across a strong magnetic field in a tokamak to the Richardson law. In this paper, we show the possibility of a universal description of the characteristics of nonlocality of transfer in a stochastic medium (including turbulence of gases and fluids) using the Biberman-Holstein approach to the transfer of excitation of a medium by photons, generalized to take into account the finiteness of the velocity of excitation carriers. This approach enables us to propose a scaling that generalizes Richardson's t3 scaling law to the combined regime of Lévy flights and Lévy walks.

Switched-mode power supplies (SMPS) often utilize electrolytic capacitors due to their substantial energy density and economical pricing. However, their ability to function at low temperatures is essential for dependable operation in several sectors, including telecommunications, automotive, and aerospace. This study includes an experimental evaluation of how well standard SMPS electrolytic capacitors operate at low temperatures. This paper investigates the suitability of standard electrolytic capacitors used in switched-mode power supplies (SMPS) for low-temperature applications. The experimental evaluation exposed the capacitors to temperatures ranging from - 5 ∘C to - 40 ∘C, assessing capacitance (Cp), impedance (Z), dissipation factor (DF), and equivalent series resistance (ESR) at each temperature. The capacitor’s time-domain electrical signals were analyzed using the Pearson correlation coefficient to extract discriminative features. These features were input into an Artificial Neural Network (ANN) for training and testing. Results indicated a significant impact of low temperatures on capacitor performance. Capacitance decreased with lower temperatures, while ESR and leakage current increased, affecting stability and efficiency. Impedance proved to be a valuable diagnostic tool for identifying potential capacitor failure, showing a 98.44% accuracy drop at - 5 degrees and 88.75% at the peak temperature, indicating proximity to the manufacturer’s specified limit. The study suggests further research and development to improve electrolytic capacitors’ performance in SMPS systems under cold conditions to enhance efficiency and reliability.

A series of water diversion projects to address the uneven distribution of water resources in China involve the construction of a large number of hydraulic tunnels. As the lining structure that maintains the stability and durability of the tunnels, it is prone to durability damage during the operation process, which in turn affects the water transmission safety and water supply capacity. Therefore, it is important to evaluate the durability of hydraulic tunnel lining structure. Considering the randomness and fuzziness of the factors affecting the durability of hydraulic tunnel lining structure, this paper proposes a comprehensive evaluation model based on the coupling of set-pair analysis and extension. The G1 method and the simple correlation function method are used to determine the subjective and objective weights of the evaluation indexes respectively, and the combination weight is assigned based on the principle of minimum entropy; the set-pair analysis principle is used to establish the linkage affiliation function, calculate the comprehensive linkage affiliation of the object to be evaluated, and the maximum affiliation principle is used to judge the durability level of the hydraulic tunnel lining structure. Finally, taking a section of hydraulic tunnel as an example, the model proposed in this paper is used to calculate its durability grade as Class III, with the set-pair potential SHI(H) = 7.5856, which is consistent with the actual engineering practice, and a comparative study is done in combination with the AHP-Extenics method. It is verified that the evaluation model can scientifically and reasonably evaluate the durability of hydraulic tunnel lining structure, providing a basis for subsequent maintenance and reinforcement.

Mapping or quantitative inversion through remote sensing technology is an active way for mineral monitoring in large or uncultivated forest areas. Different spectral features of minerals, induced by ionic composition, can be identified which are related to mineral type or abundance. Based on the distinctive spectral absorption around 2.33µm induced by the carbonate ion, we use it as an analytic target to propose an improved continuum removal (ICR) algorithm to couple with normalized abundance to evaluate the relationship between continuum removal band depth (CRBD) and carbonate ion abundance. Through experimentally testing with synthetic and real image data, ICR with ratio abundance normalization can enhance the linear relation of CRBD and abundance. We find this technique performs best for abundance retrieval. The lowest root mean square error is 0.0400 for synthetic data and the mean relative error is as low as 6.80% for real image data. Compared with five other algorithms, coupling normalized carbonate mineral abundance with ICR can improve the quantitative retrieval accuracy of carbonate ion. By using a hyperspectral library, we also present a way to retrieve abundance without ground samples. These results make the quantitative inversion of mineral abundance more reasonable by distinct or enhanced features and provide great potential for use to extend mineral information extraction in the absence of sample data, even for surveys of the Moon and Mars for mineral quantitative analysis.

Nuclear magnetic resonance (NMR) techniques are widely used to identify pure substances and probe protein dynamics. Edible oil is a complex mixture composed of hydrocarbons, which have a wide range of molecular size distribution. In this research, low field NMR (LF-NMR) relaxation characteristic data of various sample oils were analyzed. We also suggest a new method for prediction size of edible oil molecules using LF-NMR relaxation time distributions. According to the relative molecular mass, carbon chain length, transverse relaxation time of different sample oils, combined with oil viscosity and other factors, the relationship between carbon chain length and transverse relaxation time rate was analyzed. Various oils and fats in the mixed fluid are displayed, reflecting the composition information of different oils. To study the correlation between the rotation correlation time and molecular information of oil molecules. The molecular composition of the resulting fluid determines its properties, such as viscosity and phase behavior. The results show that low-field NMR can obtain information on the composition, macromolecular aggregation, and molecular dynamics of complex fluids. Measurements of grease in the free fluid state show that the relaxation time can reflect the intrinsic properties of the fluid. It is shown that the composition characteristics and states of complex fluids can be measured by low-field nuclear magnetic resonance.

With this article, impact of effluent mixed water with the quality of the Mansagar Lake has been established by evaluating the physico-chemical parameters and the heavy-metal contents experimentally. The process of calculating water quality and the metal pollution quality indices is also explained in brief with respect to selected sample locations and varied environmental conditions (Pre- and Post-Monsoon season). Distribution trends of Pearson‘s correlation factor have also been discussed to establish their relation among the physico-chemical parameters and the heavy-metal contents for varied environmental conditions. In the end, detailed discussion on observations made during this study and useful recommendations are also elaborated in details. With this article, we intend to present a document for better understanding of the water quality of this lake in view of futuristic management strategies to be adopted to maintain it heritage values.

The symmetry properties of an ornament contain information about its civilisation and its interactions with other cultural sources. Two-dimensional periodic ornaments can be strictly classified into a limited set of 17 mathematical symmetry groups, also known as wallpaper groups. The collection of ornaments thus classified for a civilisation is characteristic of the cultural group and serves as a fingerprint to identify that group. If the distribution of wallpaper groups is available for several societies, mathematical methods can be applied to determine similarities and differences between the art practices of these communities. This method allows a systematic approach to the general ornamental practices within a culture and their interactions in the form of similarity of fingerprints. We test the feasibility of the method on examples of medieval Armenians, Byzantium, Seljuks first in Persia and then in Anatolia and among Arabs in the Middle East. For this purpose we present the distribution of the planar ornaments and calculate the Euclidean distances in pairs. We tested to what extend geographical and religious factors could account for the observed similarity of ornamental groups between cultures. The results suggest an intensive interaction between the Seljuk Turks and Arab craftsmen who produced the ornaments. Therefore the cultural interactions are religiously motivated.

Determining disability prevalence is an important area for population statistics, especially among young adolescents. The Washington Group on Disability Statistics is one source of reporting disabilities through functional difficulties. However, young adolescents self-reporting this measure is in its infancy. The purpose of this study was to carry out an intra-rater test-retest reliability study on a modified set of items for self-reporting functional difficulties. Young adolescents (n=74; boys=64%; age m=13.7, SD=1.8) completed a self-reported version of the child functioning module in a supervised classroom. The second administration took place two weeks later. Intraclass correlation coefficient (ICC) and Kappa (k) statistics were used to test reliability of the items, and interpretation through Landis &amp; Koch, and Cohen, respectively. The majority of items had substantial or moderate agreement, although there was only fair agreement for self-care (ICC=0.59), concentration (ICC=0.50), and routine (ICC=0.54). Kappa statistics of behaviour were interpreted to be large (k=0.65), and seeing (k=0.49), walking (k=0.49), and speaking (k=0.49) difficulties were moderate. The majority of the items in the self-reported version of the child functioning module can be used in a scale format, although some caution may be required on items of self-care and concentration when used as a dichotomous variable.

A new strategy to nanoengineer gold/fluorocarbon multilayer (ML) nanostructures is reported. We have investigated the morphological changes occuring at the metal-polymer interface in multilayer structures with varying volume fraction of gold (Au) and the kinetic growth aspect of the microscale properties of nano-sized Au in plasma polymer fluorocarbon (PPFC). Investigations were carried out at various temperatures and annealing time by means of grazing incidence small-angle and wide-angle X-ray scattering (GISAXS and GIWAXS). We have fabricated a series of multilayers with variying volume fraction (0.12, 0.27, 0.38) of Au and bilayer periodicity in ML structure. They show an interesting granular structure consisting of nearly spherical shaped nanoparticles within the polymer layer. The nanoparticle (NP) morphology changes due to the collective effects of NPs diffusion within ensembles in the in-plane vicinity and inter-layer with increasing temperature. The in-plane NPs size distinctly increases (from 1.9 to 4 nm) with increasing temperature. The NPs become more spherical thus reducing the surface energy. Linear growth of NPs with temperature and time shows diffusion-controled growth of NPs in the ML structure. The structural stability of the multilayer is controlled by the volume ratio of the metal in polymer. At room temperature UV-Vis shows a blueshift of the plasmon peak from 560 nm in ML Au/PTFE_1 to 437 nm in Au/PTFE_3. We have identified the fabrication and post-deposition annealing conditions to limit the Local Surface Plasmon resonance (LSPR) shift (from 〖∆λ〗_LSPR=180 nm (Au/PTFE_1) to 〖∆λ〗_LSPR=67 nm (Au/PTFE_3 ML)) and their optical response over a wide visible wavelength range. A variation in the dielectric constant of the polymer in precence of varying Au inclusion is found to be the main factor affecting the LSPR frequency. Our finding may provide insights in Nano engineering ML structure can be useful to systematically control the growth of NPs in polymer matrix.

In the work, the nuclei structure was modeled by a system of shells consisting of combinations of spherical and annular vortices. Having connected the spin and the magnetic moments of the nuclei with the dynamics of the outer shell of the nucleus, we determined its type and carried out a semiempirical calculation of the parameters of its structure for stable and unstable nuclear isotopes in the sequence of the order number Z from 1 to 37. Comparison of the obtained nuclear sizes with the radii of the electron shells of atoms made it possible to reveal a definite correlation. On the basis of it, it was concluded that the periodic law of Mendeleyev can determine the patterns in the change in the structure of the atomic nucleus.

We review some new approaches to the description of the evolution of states of many-particle quantum systems by means of the correlation operators. Using the denition of marginal correlation operators within the framework of dynamics of correlations governed by the von Neumann hierarchy, we establish that a sequence of such operators is governed by the nonlinear quantum BBGKY hierarchy. The constructed nonperturbative solution of the Cauchy problem to this hierarchy of nonlinear evolution equations describes the processes of the creation and the propagation of correlations in many-particle quantum systems. Moreover, we consider the problem of the rigorous description of collective behavior of many-particle quantum systems by means of a one-particle (marginal) correlation operator that is a solution of the generalized quantum kinetic equation with initial correlations, in particular, correlations characterizing the condensed states of systems.

Hyperspectral images are an important tool to assess ecosystem biodiversity both on terrestrial and benthic habitats. To obtain more precise analysis of biodiversity indicators that agree with indicators obtained using field data, analysis of spectral diversity calculated from images have to be validated with field based diversity estimates. The plant species richness is one of the most important indicators of biodiversity. This indicator can be measured in hyperspectral images considering the Spectral Variation Hypothesis (SVH) which states that the spectral heterogeneity is related to spatial heterogeneity and thus to species richness. The goal of this research is to capture spectral heterogeneity from hyperspectral images for a terrestrial neo tropical forest site using Vector Quantization (VQ) method and then use the result for prediction of plant species richness. The results are compared with that of Hierarchical Agglomerative Clustering (HAC). The validation of the process index is done calculating the Pearson correlation coefficient between the Shannon entropy from actual field data and the Shannon entropy computed in the images. Terrestrial dry forest and marine coastal hyperspectral images with different resolutions have been used for spectral diversity feature validation.

Recently, more and more countries are entering the global race for university competitiveness. On the one hand, global rankings are a convenient tool for quantitative analysis. On the other hand, their indicators are often difficult to quickly calculate, they often contradict each other. We thought about using widely available indicators for a quick analysis of the University's publication strategy. We opted for the normalized citation indicators available in SciVal analytical tool, i.e. Source Normalized Impact per Paper (SNIP) and Field-Weighted Citation Impact (FWCI). We have demonstrated the possibility of applying the correlation analysis to the impact indicators of a document and a journal on the sample of the social and humanitarian fields at Peoples' Friendship University of Russia. Particular attention was paid to the application of the results in practice.

This study explores the prediction of concrete compressive strength using machine learning models, aiming to overcome the time-consuming and complex nature of conventional methods. Four models—Artificial Neural Network, Multiple Linear Regression, Support Vector Machine, and Regression Tree—are employed and compared for performance. Evaluation metrics such as Mean Absolute Deviation, Root Mean Square Error, Coefficient of Correlation, and Mean Absolute Percentage Error are used. After preprocessing 1030 samples, the dataset is split into 70% for training and 30% for testing. The ANN model, further divided into training, validation (15%), and testing (15%), outperforms others in accuracy and efficiency. This outcome streamlines compressive strength determination in the construction industry, saving time and simplifying the process.

We introduce a novel stochastically correlated two-factor (i.e., bivariate) diffusion process under the square-root format, for which we obtained, analytically, the corresponding solutions for the conditional moment generating functions and conditional characteristic functions. Such solutions recover verbatim those of the uncorrelated case. We believe that the The aforementioned model encompasses a range of processes similar to that produced by a bivariate square-root process in which entries are correlated in the standard way, i.e., via a constant correlation coefficient. Note that, for the latter, closed-form solutions for the conditional characteristic functions are not available. We focus on the financial scenario of obtaining closed-form expressions for the exact price of a zero-coupon bond and Asian option prices via a Fourier cosine series method.

The investigation of the spatiotemporal propagation characteristics of the "meteorological-agricultural-hydrological" drought system, under diverse climatic conditions, is crucial for the development of a robust drought warning system and the effective implementation of proactive drought prevention and resilience strategies. To achieve this, the current study utilizes the Soil and Water Assessment Tool (SWAT) model to simulate key components of the watershed water cycle, such as evaporation, surface water, soil water, and groundwater. Specifically, the Standardized Precipitation Evapotranspiration Index (SPEI), the Standardized Soil Moisture Index (SSMI), and the Nonlinear Joint Hydrological Drought Index (NJHDI) are employed to characterize meteorological drought, agricultural drought, and hydrological drought, respectively. By analyzing the correlation between these types of drought, the propagation characteristics of the "meteorological-agricultural-hydrological" drought system are elucidated using the rigorous strongest correlation coefficient method. The Yellow River Basin (YRB) is chosen as the case study for this research. Results showed that (1) The propagation time from meteorological to agricultural drought exhibited distinct seasonal characteristics, with durations of 5-6 months in spring, 2-3 months in summer, 3-5 months in autumn, and 6-8 months in winter. Compared to 1961-1990, the propagation time increased in spring and summer but decreased in autumn and winter during 1991-2010 for most YRB regions. (2) The agricultural to hydrological drought propagation showed no clear seasonal differences but increased over time. Specifically, zone C (arid/semi-arid with moderate temperatures) had shorter propagation time of 1-5 months, while zones B (transitional plateau to mid-latitude) and E (semi-arid/semi-humid temperate continental climate) experienced longer propagation time of 7-12 months. (3) Despite the extended timescales, agricultural-hydrological drought correlation was weaker than meteorological-agricultural linkage. This is because meteorological deficits directly reduce soil moisture, rapidly inducing agricultural drought. However, groundwater sustaining baseflow during agricultural drought delays streamflow deficits, prolonging the agricultural-hydrological propagation time.

Disasters related to climate change on our water resources are on the rise in terms of scale and severity. Therefore, predicting groundwater levels (GWL) is a crucial means to aid adaptive capacity towards disasters related to climate change in our water resources. In this study Gradient Boosting (GB) regression modelling approach for GWL prediction as a function of rainfall and antecedent GWL is used. Firstly, we sought to demonstrate the effects of rainfall changes on our groundwater resources through a Mann-Kendall trend analysis. Secondly, we evaluated the relationship between the input and response variables and determined the optimal lag times between the variables using autocorrelations and cross-correlations. Lastly a predictive model was developed for eight groundwater stations in the Upper Crocodile. 50 % of the groundwater stations revealed declining trends, while 25% had no trends and the other 25% showed an increasing trend. Generally low cross-correlation maximum (CCmax) were obtained, with the highest CCmax being 0.299 at an optimal lag of 2-month. While the highest autocorrelation was 0.969 at a 1-month lag. The best groundwater predictive model had R2 and MSE of 0.66 and 0.06, respectively. The stations that generally performed better had both high autocorrelation and cross-correlation coefficients. GB model performed satisfactorily in predicting GWL for most of the stations in the study area. Therefore, GB can be used for GWL prediction in the Upper Crocodile.

Externalizing behavior in its more extreme form is often considered a problem to the individual, their families, teachers and society as a whole. Several brain structures have been linked to externalizing behavior and such associations may arise if the (co)development of externalizing behavior and brain structures share the same genetic and/or environmental factor(s). We assessed externalizing behavior with the Child Behavior Checklist and Youth Self Report, and brain volumes and white matter integrity (FA and MD) with magnetic resonance imaging in the BrainSCALE cohort, consisting of twins and their older siblings from 112 families measured longitudinally at ages 10, 13, and 18 years of the twins. Genes influenced externalizing behavior and changes therein (h2 up to 88%). More pronounced externalizing behavior was associated with higher FA (observed correlation rph up to +0.20) and lower MD (rph up to –0.20); with sizeable genetic correlations (FA ra up to +0.42; MD ra up to –0.33). Cortical gray matter (CGM; rph up to –0.20) and cerebral white matter (CWM; rph up to +0.20) volume were phenotypically but not genotypically associated with externalizing behavior. These results suggest a potential mediating role for global brain structures in the display of externalizing behavior during adolescence that are both partially explained by the influence from the same genetic factor.

The standard edge crush test (ECT) allows to determine the crushing strength of the corrugated cardboard. Unfortunately, this test cannot be used to estimate the compressive stiffness, which is an equally important parameter. It is because, any attempt to determine this parameter using current lab equipment quickly ends in a fiasco. The biggest obstacle is obtaining a reliable measurement of displacements and strains in the corrugated cardboard sample. In this paper, we present a method that not only allows to reliably identify the stiffness in the loaded direction of orthotropy in the corrugated board sample, but also the full orthotropic material stiffness matrix. The proposed method uses two samples: (a) traditional, cut crosswise to the wave direction of the corrugated core, and (b) cut at an angle of 45 degrees. Additionally, in both cases, an optical system with digital image correlation (DIC) is used to measure the displacements and strains on the outer surface of samples. The use of a non-contact measuring system allows to avoid using the measurement of displacements from the crosshead, which is burdened with a large error. Apart from the new experimental configuration, the article also proposes a simple algorithm to quickly characterize all sought stiffness parameters. The obtained results are finally compared with the results obtained in the homogenization procedure of the cross-section of the corrugated board. The results were consistent in both cases.

In this work we outline a general method for calculating Auger spectra in molecules, which accounts for the underlying symmetry of the system. This theory starts from Fano’s formulation of the interaction between discrete and continuum states and generalizes this formalism to deal with the simultaneous presence of several intermediate quasi-bound states and several non-interacting decay channels. Our theoretical description is specifically tailored to resonant autoionization and Auger processes, and includes explicitly the incoming wave boundary conditions for the continuum states and an accurate treatment of the Coulomb repulsion. This approach is implemented and applied to the calculation of the K−LL Auger and autoionization spectra of ozone, which is a C2v symmetric molecule, whose importance in our atmosphere to filter out radiation has been widely confirmed. We also show the effect that the molecular point group, and in particular the localization of the core-hole in the oxygen atoms related by symmetry operations, has on the electronic structure of the Auger states and on the spectral lineshape by comparing our results with experimental data.

The Galvanic Skin Response (GSR, also widely known as electrodermal activity EDA) is one of the signals related to this emotional reaction. Given the sparsity of studies related to and the variety of devices, we experimented at the Human Health Activity Laboratory with 17 healthy subjects. The goal is to know the variability of detection changes in the electrodermal activity among a test group with heterogeneous respondents in response to valence and arousal stimuli, correlating GSR biosignals measured from different body sites. We experiment with the right and left wrist, left fingers, the right foot's inner side using Shimmer3GSR, and Empatica E4 sensors. Results indicate as the most promising homogeneous GSR measure place the left fingers and right foot. Results suggest that due to a significantly strong correlation among the inner side of the right foot and left fingers and moderate correlations with the right and left wrist, the foot is a good place to measure EDA. This paper also contributes knowledge about some wearable sensor technologies available in the market. Shimmer3GSR sensor may be better reliable to homogenous detecting electrodermal activity changes, as these have fewer anomalies among the respondents. However, we found some anomalies in signals from the Empatica E4 sensor, which we discuss in this work.

The objective of this study is to measure the crack propagation speed in three types of self-compacting concrete reinforced with steel fibers loaded under four different loading rates. Central-notched prismatic beams with two types of fibers (13 mm and 30 mm in length), three fiber volume ratios, 0.51%, 0.77% and 1.23%, were fabricated. Four strain gages were glued on one side of the specimen notch to measure the crack propagation velocity, a fifth one at the notch tip to estimate the strain rates upon the initiation of a cohesive crack and the stress-free crack. A servo-hydraulic testing machine and a drop-weight impact device were employed to conduct three-point bending tests at four loading-point displacement rates, the former to perform tests at 2.2 μm/s, 22 mm/s and the latter for those at 1.77 m/s, 2.66 m/s, respectively. With lower fiber contents, smooth mode-I cracks were formed, the crack speed reached the order of 1 mm/s and 20 m/s. However, crack velocities up to 1417 m/s were obtained for the concrete with high content of fibers under impact loading. This value is fairly close to the theoretically predicted terminal crack velocity of 1600–1700 m/s. Numerical simulations based on cohesive theories of fracture and preliminary results based on the technique of Digital Image Correlation are also presented to complement those obtained from the strain gages. In addition, the toughness indices are calculated under all four loading rates. Strain hardening (softening) behavior accounting from the initiation of the first crack is observed for all three types of concrete at low (high) loading rates. Significant enhancement in the energy absorption capacity is observed with increased fiber content.

Polydimethylsiloxane (PDMS) is one of the most popular elastomers and has been used in different fields, especially in biomechanics research. Among the many interesting features of this material, its hyperelastic behaviour stands out, which allows the use of PDMS in various applications, like the ones that mimic soft tissues. However, the hyperelastic behaviour is not linear and needs detailed analysis, especially the characterization of shear strain. In this work, two approaches, numerical and experimental, were proposed to characterize the effect of shear strain on PDMS. The experimental method was implemented as a simple shear testing associated with 3D digital image correlation and was made using two specimens with two thicknesses of PDMS (2 and 4 mm). A finite element software was used to implement the numerical simulations, in which four different simulations using the Mooney-Rivlin, Yeoh, Gent, and Polynomial hyperelastic constitutive models were performed. These approaches showed that the maximum value of shear strain occurred in the central region of the PDMS, and higher values emerged for the 2 mm PDMS thickness. Qualitatively, in the central area of the specimen, the numerical and experimental results have similar behaviours and the values of shear strain are close. For higher values of displacement and thicknesses, the numerical simulation results move further away from experimental values.

The Solvency II regulatory framework specifies procedures and parameters for determining solvency capital requirements (SCRs) for insurance companies. The proposed standard SCR calculations involve two steps. The Value–at–Risk (VaR) of each risk driver is measured and, in a second step, all components are aggregated to the company’s overall SCR, using the Standard Formula. This formula has two inputs: the VaRs of the individual risk drivers and their correlations. The appropriate calibration of these input parameters has been the purpose of various Quantitative Impact Studies that have been conducted during recent years. This paper demonstrates that the parameter calibration for the equity–risk module—overall, with about 25%, the most significant risk component—is seriously flawed, giving rise to spurious and highly erratic parameter values. As a consequence, an implementation of the Standard Formula with the currently proposed calibration settings for equity–risk is likely to produce inaccurate, biased and, over time, highly erratic capital requirements.

Abstract Background: Cluster randomized controlled trials are increasingly becoming popular in public health research interventions and health services research in primary health care design and use in low and middle-income countries. However, the majority of researchers in these trials did not account correctly for the effect of confounders and clustering in the design and analysis stages. Objectives: This article aimed to review the main implications of implementing a cluster randomized controlled trials design in public health research and emphasize the practical application of proper analytical methods and the performance of different statistical models. Methods: The practical application of various analytical methods is validated via the utilization of experimental data from a public health research case study. This article also demonstrated the performance of hierarchical models and made comparisons in terms of empirically precise effect size estimates. Results: Three hierarchical statistical models were provided with highly varied effect sizes during the analysis of the intervention effect on outcome, such as model 1 (AOR: 14.32; 95% CI: 3.75–54.68), model 2 (ARR: 3.52; 95% CI: 2.16–5.77), and model 3 (ARR: 4.79; 95% CI: 2.69–5.52).Conclusion: Inaccurate results and potentially misleading conclusions can arise from improper cluster randomized controlled trial designs and analyses. This article has shown that real-world data can be adjusted for the effects of confounders and clustering, and we advocate for the routine use of suitable design and analytical methods. This article concludes that researchers should be careful when selecting hierarchical models to analyze cluster randomized controlled trials.

Heart disease is a global health concern of paramount importance, causing a significant number of fatalities and disabilities. Precise and timely diagnosis of heart disease is pivotal in pre-venting adverse outcomes and improving patient well-being, thereby creating a growing demand for intelligent approaches to predict heart disease effectively. This paper introduces an Ensemble Heuristic-Metaheuristic Feature Fusion Learning (EHMFFL) algorithm for heart disease diagnosis. Within the EHMFFL algorithm, a diverse ensemble learning model is crafted, featuring different feature subsets for each heterogeneous base learner, including support vector machine, K-nearest neighbors, logistic regression, random forest, naive bayes, decision tree, and XGBoost. The primary objective is to identify the most pertinent features for each base learner, leveraging a combined heuristic-metaheuristic approach that integrates the heuristic knowledge of Pearson correlation coefficient with the metaheuristic-driven grey wolf optimizer. The second objective is to aggregate the decision outcomes of the various base learners through ensemble learning, aimed at constructing a robust prediction model. The performance of the EHMFFL algorithm is rigorously assessed using the Cleveland and Statlog datasets yielding remarkable results with an accuracy of 91.8% and 88.9%, respectively, surpassing state-of-the-art machine learning, ensemble learning, and feature selection techniques in heart disease diagnosis. These findings underscore the potential of the EHMFFL algorithm in enhancing diagnostic accuracy for heart disease and providing valuable support to clinicians in making more informed decisions regarding patient care.

This study aimed to develop extended–release tablets containing 25 mg IMM−H014, an original drug formulated by a direct powder pressing method based on pharmaceutical–grade hydrophilic matrix polymers, such as hydroxypropyl methylcellulose, to establish an in vitro−in vivo corre-lation (IVIVC) to predict bioavailability. The tablets’ mechanical properties and in vitro and in vivo performance were studied. The formulation was optimized using a single factor experiment and the reproducibility was confirmed. The in vitro dissolution profiles of the tablet were de-termined in five dissolution media, in which the drug released from the hydrophilic tablets fol-lowed Ritger–Peppas model kinetics in 0.01 N HCl medium for the first 2 h, and in phosphate buffer saline medium (pH 7.5) for further 24 h. Accelerated stability studies (40°C, 75% relative humidity) proved that the optimal formulation was stable for 6 months. The in vivo pharmaco-kinetics study in beagle dogs showed that compared to the IMM−H014 immediate release prep-aration, the maximum plasma concentration of the extended release (ER) preparation was sig-nificantly decreased, while the maximum time to peak and mean residence time were significantly prolonged. The relative bioavailability was 97.9% based on an area under curve, indicating that the optimal formulation has an obvious ER profile. And a good IVIVC was established, which could be used to predict in vivo pharmacokinetics from the formulation composition.

The EPR paradox was caused by the provision that quantum variables must have pre-existing values. This type of “hidden property realism” was later falsified by Bell’s Theorem. Accordingly, the physical basis for action-at-a-distance between entangled quanta was removed. Yet, modern interpretations present Bell’s inequality as a Locality Criterion, as if Bell violations can only happen at the quantum level, and only with remote interactions. This is a questionable practice, considering that classical joint measurements also violate such inequalities for mutually exclusive wave properties. In particular, consecutive measurements of polarization produce the same coef-ficients of correlation as parallel measurements with entangled quanta, yet they are explicitly local. Furthermore, it is possible to combine parallel and consecutive measurements of Type I polariza-tion-entangled photons in a single experiment, conclusively showing that quantum Bell violations can be local. Surprisingly, classical phenomena also require nonlocal interpretations if pre-existing properties are taken for granted. Hence, the solution is to reject the models with pre-existing properties for both classical and quantum wave-like phenomena.

The following article presents an analysis of the determinants of diabetes using a dataset containing the surveys of 2000 patients from the Frankfurt Hospital in Germany. The data were analyzed using the following models, namely: Tobit, Probit, Logit, Multinomial Logit, OLS, WLS with heteroskedasticity. The results show that the presence of diabetes is positively associated with "Pregnancies", "Glucose", "BMI", "Diabetes Pedigree Function", "Age" and negatively associated with "Blood Pressure". A cluster analysis is realized using the fuzzy c-Means algorithm optimized with the Elbow method and three clusters were found. Finally a confrontation among eight different machine learning algorithms is realized to select the best performing algorithm to predict the probability of patients to develop diabetes.

The origin of the man at the Earth is directly associated with the determination of directions of the flow distribution of the ancient man migration to adjacent territories. In such studies traditionally mainly landscape and climatological changes are considered. We suggest that along with the above factors, regional tectonic-geodynamic factors played a dominant role in the character of migration. The considered African-Levantine-Caucasian region is one of the most complex regions of the world, where collisional and spreading processes of geodynamics converge. First is determined an essential influence of the Akchagylian hydrospheric maximum (about 200 m above the mean sea level) limiting the ancient men migration from Africa to Eurasia. We propose that the Levantine Corridor emerged after the end of the Akchagylian transgression and landscape forming in the Eastern Mediterranean. This corridor location was formed by the movements between the Dead Sea Transform and the boundary of the carbonate platform of the Mesozoic Terrane Belt. Further landscape evolution was largely determined by the geodynamic behavior of the deep mantle rotating structure occurring below the central part of the region under study. All the mentioned events around and in the Levantine Corridor have been studied in detail on the basis of the combined geodynamic, paleogeographic, and paleomagnetic analyzes performed in northern Israel (Carmel uplift and Galilee plateau). Careful studies of the Evron quarry geological section indicate that it is a unique one for the dating of the marine and continental archaeological sequences and sheds light on the movement of the ancient man along the Levantine Corridor.

Survivors of severe brain injury may require care in a neurointensive care unit (neuro-ICU), where the brain is vulnerable to secondary brain injury. Thus, there is a need for noninvasive, bedside, continuous cerebral blood flow monitoring approaches in the neuro-ICU. Our goal is to address this need through combined measurements of EEG and functional optical spectroscopy (EEG-Optical) instrumentation and analysis to provide a complementary fusion of data about brain activity and function. The present case demonstrates in a patient with traumatic brain injury, noninvasive cerebral blood flow transients can be recorded that correlate with gold-standard invasive measurements and with the frequency content changes in the EEG data during clinical care.

The structure of self-reinforced composites (SRCs) based on ultra-high molecular weight 21 polyethylene (UHMWPE) was studied by means of Wide-Angle X-Ray Scattering (WAXS), X-Ray 22 tomography, Raman spectroscopy, Scanning Electron Microscopy (SEM) and in situ tensile testing 23 in combination with advanced processing tools like Avizo, ImageJ, and Ncorr to determine the cor-24 relation between the processing conditions, on the one hand, and the molecular structure and 25 mechanical properties, on the other. SRCs were fabricated by hot compaction of UHMWPE fibers at 26 different pressure and temperature combinations without addition of polymer matrix or softener. 27 It was found by WAXS that higher compaction temperatures led to more extensive melting of 28 fibers with the corresponding reduction of the Herman’s factor reflecting the degree of molecular 29 orientation, while the increase of hot compaction pressure suppressed the melting of fibers within 30 SRCs at a given temperature. X-Ray tomography proved the absence of porosity while polarized 31 light Raman spectroscopy measurements for both longitudinal and perpendicular fiber orienta-32 tions showed qualitatively the anisotropy of SRC samples. SEM revealed that the matrix was 33 formed by interlayers of molten polymer entrapped between fibers in SRCs. Moreover, in situ 34 tensile tests demonstrated the increase of Young’s modulus and tensile strength with increasing 35 temperature.

A Natural gas is increasingly being sought after as a vital source of energy, given that its production is very cheap and does not cause the same environmental harms that other resources, such as coal combustion, do. Understanding and characterizing the behavior of natural gas is essential in hydrocarbon reservoir engineering, natural gas transport, and process. Natural gas compressibility factor, as a critical parameter, defines the compression and expansion characteristics of natural gas under different conditions. In this study, a simple second-order polynomial model based on the group method of data handling (GMDH) is presented to determine the compressibility factor of different natural gases at different conditions, using corresponding state principles. The accuracy of the model evaluated through graphical and statistical analyses. The results show that the model is capable of predicting natural gas compressibility with an average absolute error of only 2.88%, a root means square of 0.03, and a regression coefficient of 0.92. The performance of the developed model compared to widely known, previously published equations of state (EOSs) and correlations, and the precision of the results demonstrates its superiority over all other correlations and EOSs.

In this research, univariate and bivariate statistical methods were applied to rainfall, river and piezometric level datasets belonging to 24 years long time series (1986-2009). These methods, that often are used to understand the effects of precipitation on rivers and karstic springs discharge, have been used to assess, piezometric level response to rainfall and river level fluctuations in a porous aquifer. A rain gauge, a river level gauge and three wells, located in Central Italy along the lower Pescara river valley in correspondence of its important alluvial aquifer, provided the data. The statistical analysis has been used within a known hydrogeological framework, which has been refined by mean of a photo-interpretation and a GPS survey. Water-groundwater relationships were identified following the autocorrelation and cross-correlation analyses; the spectral analysis and mono-fractal features of time series were assessed, in order to provide information on multy-year variability, data distributions, their fractal dimension and the distribution return time within the historical time series. The statistical-mathematical results were interpreted through field work that identified distinct groundwater flowpaths within the aquifer and enabled the implementation of a conceptual model, improving the knowledge on water resources management tools.

Background: The present study investigated the outcomes and possible predictive factors of autologous bone marrow cells (BMCs) therapy in patients with „no-option“ critical limb ischaemia (CLI). It was focused on exploring the clinical background and prior statin and renin-angiotensin system (RAS)-acting agent’s pharmacotherapy related to the therapeutic efficacy of BMCs treatment. Methods: In the present study, we have reviewed thirty-three patients (mean age 64.9 ± 10 years; 31 males) with advanced CLI after failed or impossible revascularisation, who were treated with 40 ml of autologous BMCs by local intramuscular application. Patients with limb salvage and wound healing (n=22) were considered responders to BMCs therapy, and patients with limb salvage and complete ischemic wound healing (n=13) were defined as super-responders. Logistic regression models were used to screen and identify the prognostic factors, and a receiver operating characteristics (ROC) curve, a linear regression and a survival curve were drawn to determine the predictive accuracy, the correlation between the candidate predictors and the risk of major amputation. Results: Based on the univariate regression analysis, baseline C-reactive protein (CRP) and transcutaneous oxygen pressure (TcPO2) values were identified as prognostic factors of the responders, while CRP value, ankle-brachial index (ABI) and bone marrow-derived mononuclear cells (BM-MNCs) concentration were identified as prognostic factors of the super-responders. An area under the ROC curve of 0.768 indicated good discrimination for CRP ˃ 8.1 mg/L before transplantation as a predictive factor for negative clinical response. Linear regression analysis revealed a significant dependence between the levels of baseline CRP and the concentration of BM-MNCs in transplanted bone marrow. Patients taking atorvastatin before BMCs treatment (n=22) had significantly improved TcPO2 and reduced pain scale after BMCs transplant, compared to the non-atorvastatin group. Statin treatment was associated with reduced risk for major amputation. However, the difference was not statistically significant. Statin use was also associated with a significantly higher concentration of BM-MNCs in the transplanted bone marrow compared to patients without statin treatment. Patients treated with RAS-acting agents (n=20) had significantly reduced pain scale after BMCs transplant, compared to the NON-RAS group. Similar results, reduced pain scale and improved TcPO2, were achieved in patients treated with atorvastatin and RAS-acting agents (n=17) before BMCs treatment. Results of the Spearman correlation showed a significant positive correlation between CLI regression, responders, and previous therapy before BMCs transplant with RAS-acting agents alone or with atorvastatin. Conclusions: CRP and TcPO2 were prognostic factors of the responders, while CRP value, ABI and BM-MNCs concentration were identified as predictive factors of the super-responders. Atorvastatin treatment was associated with a significantly increased concentration of BM-MNCs in bone marrow concentrate and higher TcPO2 and lower pain scale after BMCs treatment in CLI patients. Similarly, reduced pain scales and improved TcPO2 were achieved in patients treated with atorvastatin and RAS-acting agents before BMCs treatment. Positive correlations between responder and previous treatment before BMCs transplant with RAS-acting agents alone or atorvastatin were significant.

Rebar cages form the skeletal framework of reinforced concrete structural members. They comprise longitudinal and transverse reinforcing bars, usually connected by tie wires. Past studies have identified tie-wire connections as the "weak links" in large, prefabricated rebar cages, leading to their failure during site handling and construction stages. Recent research has explored the use of mechanical U-bolt connectors to bolster stability and safety of rebar cages while reducing their vulnerability and risk of failure. This paper presents a comprehensive experimental and numerical investigation of a new type of mechanical connector, referred to as "Cage Clamp", to enhance rebar cage stability and safety. Component-level experimental tests are conducted to determine the force-displacement response of Cage Clamp connectors for crossbar connections in different degrees of freedom. The results highlight the remarkable strength and stiffness of Cage Clamp connectors, significantly outperforming traditional tie-wire connections. Furthermore, full-scale experimental tests are performed on a circular underground pile-shaft rebar cage with Cage Clamp connectors to assess its behavior under various site handling conditions. The data obtained from these experiments are used to construct and refine detailed 3D finite element models of the rebar cages, capable of capturing the complex behavior of rebar cages with Cage Clamp connectors. Using the numerical model, a sensitivity analysis is performed to assess the effect of the number of Cage Clamps on the deflection and stability of the rebar cage. The findings show that using cage clamps to connect pick-up rebar with lateral reinforcement at every 8 to 10 feet is sufficient to ensure the stability of the cage during typical site handling conditions. The results of this study serve as a basis for establishing analysis, design, fabrication, and handling guidelines for rebar cages, contributing to safe and efficient construction practices.

This article presents a study conducted within a wind tunnel to enhance understanding of the excitation mechanism of stay cable vibration under arid conditions. Numerous wind tunnel tests were meticulously analyzed. Initially, the vibration of the stay cable was measured under steady flow conditions at a flow angle of 45 degrees and an inclination of 25 degrees, while varying wind velocities were applied. Additionally, an investigation into the flow field surrounding the stay cable was conducted in both vertical and horizontal directions. By utilizing two hot wire anemometers in the cable wake, an extensive database of flow field measurements was obtained. The experimental results revealed that the vibration characteristics of the stay cable under the arid conditions considered in this study aligned with findings reported in existing literature. Notably, a deeper comprehension of the excitation mechanism of a stay cable in a dry state was attained. This mechanism is closely associated with the inhibition of Karman vortices and the development of low-frequency vortices. At low wind speeds, Karman vortices predominated, resulting in small-amplitude vibrations. However, as the wind speed increased, the influence of Karman vortices diminished progressively, while the low-frequency vortices grew stronger. These low-frequency vortices exhibited high energy and a significant correlation with shedding along the stay cable, thereby inducing cable vibration in a dry environment.

The Direction-of-Arrival (DoA) estimation methods are highly versatile and find extensive applications in satellite communication. The DoA methods are employed across a range of orbits, from Low Earth Orbits (LEO) to Geostationary Earth Orbits (GEO). They serve multiple applications, including altitude determination, geolocation and estimation accuracy, target localization, and relative and collaborative positioning. This paper presents a novel approach for modeling the DoA angle using a closed-form expression, incorporating the boresight angle and satellite and Earth station position data. The method uses the geographic coordinate system in the satellite communication system, precisely the latitude and longitude of the Earth station and altitude parameters of the satellite stations, to calculate the Earth station’s elevation angle and accurately model the DoA angle. Furthermore, this paper performs a comprehensive comparative analysis of various DoA methods to gain deeper insights into the performance of DoA estimation in multi-antenna systems operating under spatially correlated channels. Accordingly, this paper evaluates DoA estimation performance using root-mean-square-error (RMSE) statistics for uplink and downlink conditions through extensive Monte Carlo simulations. The simulation’s effectiveness is validated against the Cramer-Rao Bound (CRB) performance metric for the Additive white Gaussian noise (AWGN) case. (i.e., thermal noise). The simulation results demonstrate improved RMSE performance in satellite systems by incorporating spatial correlation into the system model.

In the past few years, the possibility to transfer power wirelessly has experienced growing interest from the research community. Since the wireless channel is subject to a large number of random phenomena, a crucial aspect is the statistical characterization of the energy that can be harvested by a given device. For this characterization to be reliable, a powerful model of the propagation channel is necessary. The recently proposed Generalized-K model has proven to be very useful, as it encompasses the effects of path-loss, shadowing and fast fading for a broad set of wireless scenarios, and it is analytically tractable. Accordingly, the purpose of this paper is to characterize, from a statistical point of view, the energy harvested by a static device from an unmodulated carrier signal generated by a dedicated source, assuming that the wireless channel obeys the Generalized-K propagation model. Specifically, using simulation-validated analytical methods, this paper provides exact closed-form expressions for the average and variance of the energy harvested over an arbitrary time period. The derived formulation can be used to determine a power transfer plan that allows multiple or even massive numbers of low-power devices to operate continuously, as expected from future network scenarios such as IoT or 5G/6G.

This paper realizes early bearing fault warning through bearing fault time series prediction, and proposes a bearing fault time series prediction model based on optimized maximum correlation kurtosis deconvolution (MCKD) and long short-term memory (LSTM) recurrent neural network to ensure bearings operation reliability. The model is based on lifecycle vibration signal of the bearing, to begin, the cuckoo search (CS) is utilized to optimize the parameter filter length L and deconvolution period T of MCKD, taking into account the influence and periodicity of the bearing time series, the fault impact component of the optimized MCKD deconvolution time series is improved. Then select the LSTM learning rate α depending on deconvolution time series. Finally, the dataset obtained through various preprocessing approaches are used to train and predict the LSTM model. The average prediction accuracy of the optimized MCKD-LSTM model is 26 percent higher than that of the original time series, proving the efficiency of this method, and the prediction results track the real fault data well, according to the XI'AN JIAOTONG University XJTU-SY bearing dataset.

The underlying physical concept of computing out-of-time-ordered correlation (OTOC) is a significant new tool within the framework of quantum field theory, which now-a-days is treated as a measure of random fluctuations. In this paper, by following the canonical quantization technique we demonstrate a computational method to quantify the two different types of Cosmological auto-correlated OTO functions during the epoch when the non-equilibrium features dominates in Primordial Cosmology. In this formulation, two distinct dynamical time scales are involved to define the quantum mechanical operators arising from cosmological perturbation scenario. We have provided detailed explanation regarding the necessity of this new formalism to quantify any random events generated from quantum fluctuations in Primordial Cosmology. We have performed an elaborative computation for the two types of two-point and four-point auto-correlated OTO functions in terms of the cosmological perturbation field variables and its canonically conjugate momenta to quantify random auto-correlations in the non-equilibrium regime. For both the cases we found significantly distinguishable non-chaotic, but random behaviour in the OTO auto-correlations, which was not pointed before in this type of studies. Finally, we have also demonstrated the classical limiting behaviour of the mentioned two types of auto-correlated OTOC functions from the thermally weighted phase space averaged Poisson Brackets, which we found exactly matches with the large time limiting behaviour of the auto-correlations in the super-horizon regime of the cosmological scalar mode fluctuation.