We evaluate the complexity of Colombian climate from extreme behavior of gauge temperature and precipitation, using the the novel Tsallis' non-extensive entropy principle based on physical information through the q-index. We find the spatial structure of non additive universal categories (q-index) and compare with some complex systems with the potential to have some degree of dynamical affinity. Our results evidence the great dynamical variability of regional climate expressed in the large range of values of $q$-index, and the high degree of non-extensitivity for both temperature and precipitation.

An inclusive curriculum with a socio-cultural approach must include content on sustainability. This study raised the following problem: What is the presence of contents related to sustainability in the curricula of 24 degrees of Pedagogy of the Spanish state.? Through an explicit study, subjects directly related to sustainability were identified and analyzed through the qualitative data analysis program Atlas-ti. The categories of analysis used were those present in the Sustainability Thesaurus [4] to which the professional category was incorporated. The results showed, on the one hand, the low presence in these grades of subjects whose name indicates a direct link with sustainability and, on the other hand, On the other hand, the presence of professional competencies was detected, which were not subsequently specified in the corresponding learning outcomes or in the training content.

The 21st century has seen the launch of new space-borne sensors based on LiDAR (light detection and ranging) technology developed in the second half of the 20th century. LiDAR was initially developed to integrate laser-focused imaging with the capability to determine distances through the measurement of signal return times, utilizing suitable sensors and data acquisition electronics. Nowadays, these sensors have transformed into robust instruments, offering novel opportunities for mapping terrain, canopy heights, and estimating above-ground biomass (AGB) across local to regional scales. This work aims to analyze the scientific impact of these sensors on large-scale for-est mapping to retrieve 3D canopy information, monitor forest degradation, estimate AGB, and model key ecosystem variables such as primary productivity and biodiversity. In this way, a worldwide bibliometric analysis of this topic was carried out based on up to 412 publications in-dexed in the Scopus database during the period 2004-2022. The results showed that the number of published documents increased exponentially in the last five years, coinciding with the commis-sioning of two new LiDAR space missions: Ice, Cloud and Land Elevation Satellite (ICESat-2) and Global Ecosystem Dynamics Investigation (GEDI). These missions are providing data since 2018 and 2019, respectively. The journal that demonstrated the highest productivity in this field was "Remote Sensing," and among the leading contributors, the top five countries in terms of publica-tions were the USA, China, the UK, France, and Germany. In the realm of prominent research in-stitutions, France boasted six, the USA had four, China had three, while the UK and Canada each had one. The upward trajectory in the number of publications recorded from 2004 to 2022 catego-rizes the subject under investigation as a highly trending research topic, particularly within the context of enhancing the administration of forest resources and engaging in global climate treaty frameworks mandating the surveillance and reporting of carbon stocks in forests. The recent launch in August 2022 of the Terrestrial Ecosystem Carbon Monitoring Satellite (TECMS; China State Administration of Forestry and Grassland), along with the planned launch in the coming years of up to three new space sensors, such as the Multi-footprint Observation LiDAR and Im-ager (Japan Aerospace Exploration Agency), the BIOMASS P-band Synthetic Aperture Radar (SAR) (European Space Agency), and the LiDAR Surface Topography (LIST; NASA), will greatly contribute to expanding the ability to map and monitor forest systems at very large scales. In this context, the integration of space-borne data, including imagery, SAR, and LiDAR, is anticipated to steer the trajectory of this research in the upcoming years.

Study question: What are the current trends of research in Human Assisted Reproduction around the world? Summary answer: USA is the leading country, followed by the UK, China, France and Italy. The largest research area is “laboratory techniques”, although other areas such as “public health”, “quality, ethics and law” and “female factor” are gaining ground worldwide. What is known already: Scientific research, especially in health and medical sciences, aims at addressing specific needs that society (and, especially, patients) perceives as pressing. One of the main challenges for policymakers and research funders alike is therefore to align research priorities to societal needs. We can thus think of research agendas in terms of a demand side (societal needs) and a supply side (research outputs). Research output in Human Assisted Reproduction has expanded in the past years, as indicated by the increasing number of scientific publications in indexed journals in this area. Nevertheless, no map of research related to assisted reproduction has been produced so far, hindering the identification of potential areas of improvement and need. Study design, size, duration: 26,000+ scientific publications (articles, letters, and reviews) on Human Assisted Reproduction produced worldwide between 2005 and 2016 were analyzed. These publications were indexed in PubMed or obtained from reference list of indexed publications included in the analysis.Participants/materials, setting, methods: The corpus of publications was obtained by combining the MeSH terms: “Reproductive techniques”, “Reproductive medicine”, “Reproductive health”, “Fertility”, “Infertility”, and “Germ cells”. Then it was analyzed by means of text mining algorithms (Topic Modeling (TM) based on Latent Dirichlet Allocation (LDA)), in order to obtain the main topics of interest. Finally, these categories were analyzed across world regions and time. Main results and the role of chance: We identified 44 main topics, which were further grouped in 11 macro categories, form larger to smaller: “laboratory techniques”, “male factor”, “quality, ethics and law”, “female factor”, “public health and infectious diseases”, “basic research and genetics”, “pregnancy complications and risks”, “general infertility and ART”, “psychosocial aspects”, “cancer”, and “research methodology”. The USA was the leading country in number of publications, followed by the UK, China, France and Italy. Interestingly, research contents in high income countries is fairly homogeneous across macro-categories, and it is dominated by “laboratory techniques” in Western and Southern Europe, and by “quality, ethics and law” in North America, Australia and New Zealand. In middle income countries we observe that research is mainly performed on “male factor”, and noticeably less on “female factor”. Finally, research on “public health and infectious diseases” predominates in low-income countries. Regarding temporal evolution of research, “laboratory techniques” is the most abundant topic on a yearly basis, and relatively constant over time. However, since production in most of the other categories is increasing, the relative contribution of this research category is actually decreasing. Publication is especially increasing in “public health and infectious diseases” (in all world regions, but especially in low income countries), “quality, ethics and law” (high income countries), and “female factor” (middle income countries). Limitations, reasons for caution: Three main factors might limit the robustness of our work: the textual corpus analyzed is based on abstract and titles, the reproducibility of the stochastic algorithms applied, which may produce slightly differing results at each run, and the interpretation of the topics obtained. Wider implications of the findings: This study should prove beneficial in the design of research strategies and policies that foster the alignment between supply (assisted reproduction research) and demand (society). Study funding/competing interest(s): PTQ-14-06718 of the Spanish MINECO Torres Quevedo programme (FAM).

Exposure of experimental rodents to controlled cycles of light, food, and temperature is important when investigating alterations in circadian cycles that profoundly influence health and disease. However, applying such stimuli simultaneously is difficult in practice. Our aim was to design, build, test, and open-source describe a simple device that subjects a conventional mouse cage to independent cycles of physiologically relevant environmental variables. The device is based on a box enclosing the rodent cage to modify the light, feeding, and temperature environments. The device provides temperature-controlled air conditioning (heating or cooling) by a Peltier module and includes programmable feeding and illumination. All functions are set by a user-friendly front panel for independent cycle programming. Bench testing with a model simulating the CO2 production of mice in the cage showed: a) suitable air renewal (by measuring actual ambient CO2), b) controlled realistic illumination at the mouse enclosure (measured by a photometer), c) stable temperature control, and d) correct cycling of light, feeding, and temperature. The cost of all the supplies (retail purchased by e-commerce) was < 300 US$). Detailed technical information is open-source provided, allowing for any user to reliably reproduce or modify the device. This approach can considerably facilitate circadian research since using one of the described low-cost devices for any mouse group with a given light-food-temperature paradigm allows for all the experiments to be performed simultaneously, thereby requiring no changes in the light/temperature of a general-use laboratory.

The participation of civil society is essential for environmental health policies to be effective. The objective of this study was to know the perceptions of government officials, members of civil society, and academics about environmental health problems and its governance in Bucaramanga Metropolitan Area, Colombia. In the region there is a strong citizen movement that defends the moorland ecosystem (paramo) as source of drinking water, of large-scale mining projects. A multi-method study was carried out including the review of newspaper and scientific articles, a citizen survey, and interviews and focus groups with identified key stakeholders. The findings indicate that government officials prioritize their actions on issues related to air and water pollution and environmental education. In contrast, citizens prioritize water availability from the moorland ecosystem. There are some advances in the management of environmental health, mainly related to greater citizen awareness. The participation of civil society in the environmental health governance must be enforced to broaden the issues of interest and prioritize the activities in the short- and long-term policy planning. An experience between high school students and the academy that measures air pollutants can be the first meeting point with government officials in the pathway to improve the environmental governance in the territory.

Copper nitride (Cu3N), a metastable semiconductor material, but with reasonably-high-stability at room temperature, is drawing a great deal of attention as a very promising next-generation, earth-abundant, thin-film solar absorber. Its non-toxicity, on the other hand, makes it a very attractive eco-friendly semiconducting material. In the present work, Cu3N thin films were grown by employing radio-frequency magnetron sputtering, at room temperature, with 50-W RF-power, and partial nitrogen pressures of 8.0 and 1.0, onto glass substrates. Thus, the influence of argon on the optical properties of the Cu3N thin films was studied, with the goal of being able to achieve a low-cost, light absorber material, with appropriate properties in order to substitute the more conventional silicon, in photovoltaic cells. Variable-angle spectroscopic ellipsometry measurements have been conducted at three angles, 50∘, 60∘, and 70∘, respectively, in order to obtain the two ellipsometric parameters psi, ψ, and delta, Δ, respectively. For the constructed optical model, the bulk planar Cu3N layer is described by a one-dimensional graded-index model, combine with the mixture of a Tauc-Lorentz oscillator and up to four Gaussian oscillators, whereas a BEMA model with 50%-air-void is adopted in order to account for the existing surface-roughness layer. In addition, the optical properties such as the energy-band gap, and refractive index and absorption coefficient, were determined in order to assess the actual capability of this material as a light absorber for solar cells. The direct and indirect band gap energies were accurately calculated, and they were found to be in the ranges of 2.14-2.21 eV and very clse to 1.50 eV, respectively.

The objective of this study was to evaluate the glycemic index and the satiety response of three Mexican kinds of honey. The values of fructose ranged from 272.40-395.10 g/kg, while the glucose value ringed 232.20-355.50 g/kg. The ratio F/G of sample honey was 1.45, 1.00, and 1.17 for Highland, Multifloral, and Avocado honey, respectively. Twenty-six participants completed this study, which was previously approved by the ethics committee of the Facultad de Salud Pública y Nutrición (CE 2/2018-19). Highland and Avocado honey is classified as medium-GI (69.204.07 and 66.365.74, respectively), while Multifloral honey is classified as high-GI (74.245.98). The Highland honey presented the best satiety response. The difference in IG values and the effect of the satiety response of Highland honey could be explained by the different fractions of carbohydrates in samples and other components such as phytochemicals.

Bimetallic nanoparticles are of interest since they lead to many interesting electrical, chemical, catalytic, and optical properties. They are particularly important in the field of catalysis since they show superior catalytic properties than their monometallic counterparts. The structures of bimetallic nanoparticles depend mainly on the synthesis conditions and the miscibility of the two components. In this work, PdPt alloyed-bimetallic nanoparticles (NPs) were synthesized through the polyol method, and characterized using spherical aberration (Cs) corrected scanning transmission electron microscopy (STEM). High-angle annular dark-field (HAADF)-STEM images of bimetallic nanoparticles were obtained. The contrast of images shows that nanoparticles have an alloy structure with an average size of 8.2 nm. Together with the characterization of nanoparticles, a systematic molecular dynamics simulations study, focused on the structural stability and atomic surface segregation trends in 923-atom PdPt alloyed-bimetallic NPs was carried out.

Laminopathies are causally associated with mutations on Lamin A gene (LMNA). To date, more than 400 mutations in LMNA have been reported in patients. These mutations are widely distributed throughout the entire gene and are associated with a wide range of phenotypes. Unfortunately, little is known about the mechanisms underlying the effect of the majority of these mutations. This is the case of more than 40 mutations that are located at exon 4. Using CRISPR/Cas9 technology, we have generated a collection of Lmna exon 4 mutants in mouse C2C12 myoblasts. These cell models include different types of exon 4 deletions and the presence of R249W mutation, one of the human variants associated with a severe type of laminopathy (LMNA-associated congenital muscular dystrophy). We have characterized these clones by measuring their nuclear circularity, myogenic differentiation capacity in 2D and 3D conditions, DNA damage, and p-ERK and p-AKT levels. Our results indicate that Lmna exon 4 mutants show abnormal nuclear morphology. In addition, levels and/or subcellular localization of different members of the lamin and LINC complex are altered in all these mutants. Whereas no significant differences were observed for ERK and AKT activities, the accumulation of DNA damage was associated to the Lmna p.R249W mutant myoblasts. Finally, significant myogenic differentiation defects were detected in the Lmna exon 4 mutants. These results have key implications in the development of future therapeutic strategies for the treatment of laminopathies.

STUDY QUESTION: Which are the main research interests among patients of assisted reproductive technologies (ART)? SUMMARY ANSWER: Patients identified as research priorities that deserve further investigation: success rates and risks of ART, side-effects of treatments, resources to cope with infertility, effectiveness of alternative therapies, lifestyle habits to protect fertility, oocyte quality and ovarian reserve, and causes of genetic or hereditary infertility. WHAT IS KNOWN ALREADY: The involvement of patients and caregivers in setting research agendas in medicine has gathered significant momentum in the last decade. Patients’ involvement in setting research priorities offers several benefits: improved patient knowledge and awareness of their condition; greater understanding of the medical professionals of the impact of the condition on patients’ quality of life; reduced costs associated with redundant research activities. This is may be also applicable to research in infertility and ART, where patients’ interests have never been explored before. STUDY DESIGN, SIZE, DURATION: This is a cross-sectional study that consists of an anonymous online survey, which was sent up to three times to 2112 patients from 11 fertility centers in 5 countries between January-December 2018. The study design was based on the James Lind Alliance priority setting partnership model, which comprises the identification of patients groups, the exploration of the research agenda, the analysis of collected data and identification of priorities. PARTICIPANTS/MATERIALS, SETTING, METHODS: Overall, 2112 patients were contacted, and 945 surveys were answered (RR: 44.7%). Patients were asked to identify research questions relevant to them in the areas of infertility causes and prevention, fertility treatments (medication and ART), and the emotional aspects of infertility. Answers were categorized in topics and ranked by frequency. A long list of the top-30 research topics was extracted from the aggregate results, from which, a short list of the top-10 research topics was created. At the end, 10 research questions related to each of the 10 research topics were constructed, based on the answers given by patients. MAIN RESULTS AND THE ROLE OF CHANCE: Female (845, 89.4%) and male (100, 10.6%) patients were included. The mean age of patients was 37.8 (SD 1.74). Most of the patients did not have children at the time of the survey (523, 59%), while 51 (5.7%) were pregnant. Sixty (6.3%) patients did not start treatment, 579 (61.3%) were performing a treatment with their own gametes and 304 (32.2%) were treated through gamete donation. Patients were mainly interested in the effectiveness of ART -especially per clinical profile-, side effects of drugs, protection of fertility and prevention of infertility –especially through diet and exercise-, and psychological aspects of the infertility journey. The top-10 research questions (and weight) obtained were: 1) What are the side-effects of ART treatments? (41.6%); 2) What are the most effective methods to cope with infertility from the psychological point of view? (37.2%); 3) What effects could diet have on fertility? (25.9%); 4) What are ART success rates per clinical profile? (25.9%); 5) Are there habits and lifestyle factors that could prevent infertility? (20.0%); 6) What are the long-term risks associated to ART? (18.5%); 7) Are alternative therapies such as acupuncture, yoga, and meditation effective to treat/prevent infertility? (18.5%); 8) What is the impact of exercise on fertility? (15.4%); 9) How does oocytes quantity and quality affect fertility? (9.5%); 10) What are the genetic patterns or hereditary conditions causing/related to infertility? (9.5%). LIMITATIONS, REASONS FOR CAUTION: Although all respondents had attended a fertility center, not all of them were diagnosed as infertile (i.e. single women) and had started treatment at the time of response, while a few were pregnant; their priorities for research might have been influenced by their infertility journey. Also, all participants attended private fertility centers: areas of interest may be different in public settings. WIDER IMPLICATIONS FOR THE FINDINGS: Researchers and clinicians should keep in mind that, in addition to improvement of treatments’ success rates and side-effects, patients greatly value research on causes, prevention and emotional aspects of infertility. As their views might differ from those of medical professionals, patients’ voices should be incorporated in setting infertility research priorities.