This paper attempts at applying adaptive network-based fuzzy inference system (ANFIS) for analysis of the resonant frequency of a microstrip rectangular patch antenna with two equal size slots which are placed on the patch vertically. The resonant frequency is calculated as the position of slots is shifted to the right and left sides on the patch. As a result , the antenna resonates at more than one frequency . Commonly, machine algorithms based on artificial neural networks are employed to recognize the whole resonant frequencies. However ,they fail to estimate the resonant frequencies correctly as in some cases variations are not very sensible and the resonant frequencies overlap each other . It can be concluded that artificial neural networks could be replaced in such designs by the adaptive network-based fuzzy Inference system due to its high approximation capability and much faster convergence rate.

The diffusion of molecules in aqueous solutions in the domain of membrane technology is very critical in the efficiency of chemical engineering and purification processes. In this study, the diffusion in high and low concentration regions is simulated with finite difference method (FDM), and then the results of numerical computations are coupled with adaptive network-based fuzzy inference system (ANFIS) and bilayered neural network method (BNNM). Machine learning approach can individually predict diffusion phenomena across the domain based on understanding of the machine instead of the discretization of an ordinary differential equation (ODE). The findings of the machine learning method are in good agreement with those of FDM at different times of the simulation. In addition to numerical computation, the error of the system is computed for different iterations. The results show that by increasing the number of iterations and training datasets, all errors reduce significantly for both training and testing. BNN method is also used to train the prediction process of diffusion for a more accurate comparison. This technique is similar to ANFIS method in terms of prediction capability. According to the findings, ANFIS approach predicts diffusion slightly better than BNN method. In this regard, ANFIS technique produces R>0.99 while BNN method produces R around 0.98. Both machine learning methods are accurate enough to predict diffusion throughout the domain for different time steps. The computational time for both algorithms is less than that of FDM method to predict low and high concentrations in the domain. Besides, based on the results, artificial intelligence (AI) can find the relationship between inputs and outputs and determine which input has the main influence on the output in this study to optimize the process. As such, future studies can be focused on AI and other methods for faster prediction and optimization processes.

Safety is very important in aviation since a loss of safety frequently results in both fatalities and financially damaging situations that are typically unrecoverable. Thus, achieving safety as much as possible is the primary goal of practically all aviation technology work. In this study, an Adaptive Neuro-Fuzzy Inference System (ANFIS)-based classifier is created to estimate the fault risk factor of airplanes. Five categories of real fleet data belonging to structure, electrical, avionic, motor systems, and incident statistics of the planes have been used for classifier development. A risk factor determination for each plane is the output of the developed intelligent classifier, and it can be used to identify general overhaul candidate planes and stop defects and crashes before they happen. The obtained results show that using ANFIS provides a great capability in processing many inputs and outputs depending on different types and classes in the aviation industry and thus predicting the failure risk of the airplane efficiently.

Computer systems are involved in many critical human applications today, so that a small error can lead to serious and dangerous problems. These errors can be from an error in the incorrect design of the user interface to an error in the program code. The success of a software product depends on several factors. Given that different organizations and institutions use software products, the need to have a quality and desirable Software according to the goals and needs of the organization makes measuring the quality of software products. an important issue for most organizations and institutions, To be sure of having the right software. It is necessary to use a standard quality model to examine the features and sub-features for a detailed and principled study in the quality discussion. In this study, the quality of Word software was measured by Adaptive Neural Fuzzy Inference System. In recent years, powerful systems called fuzzy inference systems on The basis of adaptive neural network (ANFIS) has been used in various sciences. Using the power of neural network training and the linguistic advantage of fuzzy systems, these types of systems have been able to realize the advantages of the two in terms of analyzing very powerful complex processes. Considering the importance of software quality and to have a good and usable software in terms of quality and measuring the quality of software during the study. It was applied at different levels to make the result of measuring the quality of Word software more accurate and closer to reality. In this research, the quality of the software product is measured based on the adaptive neural-fuzzy inference system in ISO standard. According to the results obtained in this study, it is understood that quality is a continuous and hierarchical concept and the quality of each part of the software at any stage of production can lead to high quality products.

This paper presents a method to detect and classify the high impedance fault that occur in the medium voltage distribution network using discrete wavelet transform (DWT) and adaptive neuro-fuzzy inference system (ANFIS). The network is designed using Matlab software and various faults such as high impedance, symmetrical and unsymmetrical fault have been applied to study the effectiveness of the proposed ANFIS classifier method. This is achieved by training the ANFIS classifier using the features (standard deviation values) extracted from the three phase fault current signal by DWT technique for various cases of fault with different values of fault resistance in the system. The success and discrimination rate obtained for identifying and classifying the high impedance fault from the proffered method is 100% whereas the values are 66.7% and 85% respectively for conventional fuzzy based approach. The results indicate that the proposed method is more efficient to identify and discriminate the high impedance fault accurately from other power system faults in the system.

Grading of rice grains has gain attentions due its requirement of quality assessment during import or export. Rice grain quality depends on milling operation, where rice hull is removed with a huller system followed by whitening operation. In such process, adjustment of rollers, control, and operation is important in terms of quality of milled rice. Especially, the basmati rice needed more quality assurance as it is not parboiled rice and exported globally with a high product value. In this present work, the basic problem of quality assessment in rice industry is addressed with digital image processing based technique. Machine vision and digital image processing provide an alternative with the automated, nondestructive, cost-effective, and fast approach as compared with traditional method which is done manually by human inspectors. A model of quality grade testing and identification is built based on morphological features using digital image processing and knowledge based adaptive neuro-fuzzy inference system (ANFIS). The qualities of rice kernels are determined with the help of shape descriptors and geometric features using the sample images of milled rice. The adopted technique has been tested on a sufficient number of training images of basmati rice grain. The proposed method gives a promising result in an evaluation of rice quality with 100% classification accuracy for broken and whole grain. The milling efficiency is also assessed using the ratio between head rice and broken rice percentage and it is 77.27% for the test sample. The overall results of the adopted methodology are promising in terms of classification accuracy and efficiency.

Recently, various relations and criteria have been presented to establish a proper relationship between control systems and control Global Positioning System (GPS)-intelligent buoy system. Given the importance of controlling the position of buoys and the construction of intelligent systems, in this paper, dynamic system modeling is applied to position marine buoys through the improved neural network with a backstepping technique. This study aims at developing a novel controller based on adaptive fuzzy neural network to optimally track the dynamically positioned vehicle on water with unavailable velocities and unidentified control parameters. In order to model the network with the proposed technique, uncertainties and the unwanted disturbances are studied in the neural network. The presented study aims at developing a neural controlling which applies the vectorial back-stepping technique to the surface ships, which have been dynamically positioned with undetermined disturbances and ambivalences. Moreover, the objective function is to minimize the output error for the neural network (NN) based on closed-loop system. The most important feature of the proposed model for the positioning buoys is its independence from comparative knowledge or information on the dynamics and the unwanted disturbances of ships. The numerical and obtained consequences demonstrate that the controller system can adjust the routes and the position of the buoys to the desired objective with relatively few position errors.

Climate change impacts and adaptations is subject to ongoing issues that attract the attention of many researchers. Insight into the wind power potential in an area and its probable variation due to climate change impacts can provide useful information for energy policymakers and strategists for sustainable development and management of the energy. In this study, spatial variation of wind power density at the turbine hub-height and its variability under future climatic scenarios are taken under consideration. An ANFIS based post-processing technique was employed to match the power outputs of the regional climate model with those obtained from the reference data. The near-surface wind data obtained from a regional climate model are employed to investigate climate change impacts on the wind power resources in the Caspian Sea. Subsequent to converting near-surface wind speed to turbine hub-height speed and computation of wind power density, the results have been investigated to reveal mean annual power, seasonal, and monthly variability for a 20-year period in the present (1981-2000) and in the future (2081-2100). The results of this study revealed that climate change does not affect the wind climate over the study area, remarkably. However, a small decrease was projected for future simulation revealing a slightly decrease in mean annual wind power in the future compared to historical simulations. Moreover, the results demonstrated strong variation in wind power in terms of temporal and spatial distribution when winter and summer have the highest values of power. The findings of this study indicated that the middle and northern parts of the Caspian Sea are placed with the highest values of wind power. However, the results of the post-processing technique using adaptive neuro-fuzzy inference system (ANFIS) model showed that the real potential of the wind power in the area is lower than those of projected from the regional climate model.

Amid escalating urbanization, devising rational commercial space layouts is a critical challenge. Leveraging machine learning, this study uses a Back-propagation (BP) neural network to optimize commercial spaces in Weinan City's central urban area. The results indicate an increased number of commercial facilities with a trend of multi-centered agglomeration and outward expansion. Based on these findings, we propose a strategic framework for rational commercial space development emphasizing aggregation centers, development axes, and spatial guidelines. This strategy provides valuable insights for urban planners in small and medium-sized cities in the Yellow River Basin and metropolitan areas, ultimately showcasing the power of machine learning in enhancing urban planning.

This work has its origin in intuitive physical and statistical considerations. The problem of optimizing an artificial neural network is treated as a physical system, composed of a conservative vector force field. The derived scalar potential is a measure of the potential energy of the network, a function of the distance between predictions and targets. Starting from some analogies with wave mechanics, the description of the sys-tem is justified with an eigenvalue equation that is a variant of the Schr˜odinger equation, in which the potential is defined by the mutual information between inputs and targets. The weights and parameters of the network, as well as those of the state function, are varied so as to minimize energy, using an equivalent of the variational theorem of wave mechanics. The minimum energy thus obtained implies the principle of minimum mutual information (MinMI). We also propose a definition of the potential work produced by the force field to bring a network from an arbitrary probability distribution to the potential-constrained system, which allows to establish a measure of the complexity of the system. At the end of the discussion we expose a recursive procedure that allows to refine the state function and bypass some initial assumptions, as well as a discussion of some topics in quantum mechanics applied to the formalism, such as the uncertainty principle and the temporal evolution of the system. Results demonstrate how the minimization of energy effectively leads to a decrease in the average error between network predictions and targets.

This paper proposes a radiation pattern synthesis of the almost periodic antenna arrays including mutual coupling effects (that extracted by the Floquet analysis according to our previous work), which principally has a high directivity and large bandwidth. For modeling the given structures, the moment method combined with the Generalized Equivalent Circuit (MoM-GEC) is proposed. The artificial neural network (ANN) as a powerful computational model has been successfully applied to the antenna array pattern synthesis. The results showed that the multilayer feedforward neural networks are rugged and can successfully and efficiently resolve various distinctive complex almost periodic antenna patterns (with different source amplitudes) (in particular, both periodic and randomly aperiodic structures are taken into account). However, the artificial neural network (ANN) is capable of quickly producing the synthesis results using generalization with the early stopping (ES) method. A significant time gain and memory consumption are achieved by using this given method to improve the generalization (called early stopping). To justify this work, several examples are developed and discussed.

A millimeter-wave microstrip leaky-wave antenna array based on the substrate-integrated waveguide (SIW) and the complementary split-ring resonator (CSRR) is proposed in this paper. The slow wave characteristics of the SIW are enhanced by etching two rows of symmetrical CSRR-type slots on the surface of the SIW layer. The magnetic coupling between the CSRR-SIW layer and equally spaced circular patches array on the upper layer realizes the radiation of electromagnetic energy. In the 23~30 GHz (relative bandwidth 26.4%) operating frequency band, the horizontal polarization radiation beam scanning from -62° to -2° is realized, with a peak gain of 9.6~11.7 dBi, and the cross-polarization ratio is more than 43.8 dB.

Nowadays the dynamism induced by the constant change of strategic decisions on the markets produces an extra difficulty in the management of an organization. The strategic decisions made by managers can become obsolete in a short period of time. One of the major difficulties in managing a commercial organization is to predict, with some precision degree, the impact some strategic decisions have on the financial results. Business Intelligence (BI) is an area widely used to help managers to make strategic decisions. But the methods used, behind the scenes, to achieve the conclusions are kept secret by BI company-based services. Modelling the environment can be a good option to study the impact of an action, provided by a strategic decision, in a real environment. A good model should give an approximate result of an action applied to a previous state of the environment. Artificial Neural Networks (ANNs) are proven to be excellent in modeling environments with some level of data noise. The same strategic action can have different results in different organizations. A tool that allows an evaluation of a strategic action applied to an environment should have a major importance in the management scope. Modeling the environment should save time and money for the organization to improve the performance of the strategic plan. If one evaluates the state of the environment after a strategic action being applied, it can be possible to mitigate the risk of failure of the strategic plan. As we will be able to verify, it is possible to use ANNs to model strategic environments that should allow the prediction of sales and operating results by the used strategies with some precision, although the level of success will be directly related with the user’s necessity.

The success of a software product depends on several factors. Given that different organizations and institutions use software products, the need to have a quality and desirable software according to the goals and needs of the organization makes measuring the quality of software products an important issue for most organizations and institutions. To be sure of having the right software. It is necessary to use a standard quality model to examine the features and sub-features for a detailed and principled study in the quality discussion. In this study, the quality of Word software was measured. Considering the importance of software quality and to have a good and usable software in terms of quality and measuring the quality of software during the study, experts and skilled in this field were used and the impact of each factor and quality characteristics. It was applied at different levels according to their opinion to make the result of measuring the quality of Word software more accurate and closer to reality. In this research, the quality of the software product is measured based on the fuzzy inference system in ISO standard. According to the results obtained in this study, it is understood that quality is a continuous and hierarchical concept and the quality of each part of the software at any stage of production can lead to high quality products.

The accurate prediction of the solar Diffuse Fraction (DF), sometimes called the Diffuse Ratio, is an important topic for solar energy research. In the present study, the current state of Diffuse Irradiance research is discussed and then three robust, Machine Learning (ML) models, are examined using a large dataset (almost 8 years) of hourly readings from Almeria, Spain. The ML models used herein, are a hybrid Adaptive Network-based Fuzzy Inference System (ANFIS), a single Multi-Layer Perceptron (MLP) and a hybrid Multi-Layer Perceptron-Grey Wolf Optimizer (MLP-GWO). These models were evaluated for their predictive precision, using various Solar and Diffuse Fraction (DF) irradiance data, from Spain. The results were then evaluated using two frequently used evaluation criteria, the Mean Absolute Error (MAE) and the Root Mean Square Error (RMSE). The results showed that the MLP-GWO model, followed by the ANFIS model, provided a higher performance, in both the training and the testing procedures.

The effectiveness of Fuzzy Inference Systems (FISs) in manipulating uncertainty and nonlinearity makes them a subject of significant interest for decision-making in embedded systems. Accordingly, optimizing FIS hardware improves its performance, efficiency, and capabilities, leading to a better user experience, increased productivity, and cost savings. To be compatible with the limited power budget in most embedded systems, this paper presents a framework to realize ultra-low power FIS hardware. It supports optimizations for both conventional arithmetic as well as MSDF-computing to be highly consistent with MSDF-based sensors. In MSDF-computing FIS all the processes of fuzzification, inference, and defuzzification are done on serially coming data bits. To demonstrate the efficiency of the proposed framework, we utilized Matlab, Chisel3, and Vivado to implement it from high-level descriptions of FIS to hardware synthesis. We also developed a Scala library in Chisel3 to establish a connection between these tools, bridging the gap, and facilitating design space exploration at the arithmetic level. Furthermore, we realized an FIS for the navigation of autonomous mobile robots in unknown environments. Synthesis results show the superiority of the output of our suggested design framework in terms of resource usage as well as power and energy consumption compared to the Matlab HDL code generator output.

Activation Functions are crucial parts of the Deep Learning Artificial Neural Networks. From the Biological point of view, a neuron is just a node with many inputs and one output. A neural network consists of many interconnected neurons. It is a “simple” device that receives data at the input and provides a response. The function of neurons is to process and transmit information; the neuron is the basic unit in the nervous system. Carly Vandergriendt (2018) stated the human brain at birth consists of an estimated 100 billion Neurons. The ability of a machine to mimic human intelligence is called Machine Learning. Deep Learning Artificial Neural Networks was designed to work like a human brain with the aid of arbitrary choice of Non-linear Activation Functions. Currently, there is no rule of thumb on the choice of Activation Functions, “Try out different things and see what combinations lead to the best performance”, however, sincerely; the choice of Activation Functions should not be Trial and error. Jamilu (2019) proposed that Activation Functions shall be emanated from AI-ML-Purified Data Set and its choice shall satisfy Jameel’s ANNAF Stochastic and or Deterministic Criterion. The objectives of this paper are to propose instances where Deep Learning Artificial Neural Networks are SUPERINTELLIGENT. Using Jameel’s ANNAF Stochastic and or Deterministic Criterion, the paper proposed four classes where Deep Learning Artificial Neural Networks are Superintelligent namely; Stochastic Superintelligent, Deterministic Superintelligent, and Stochastic-Deterministic 1^st and 2^nd Levels Superintelligence. Also, a Normal Probabilistic-Deterministic case was proposed.

For years, effort has been devoted to establishing an effective bull breeding soundness evaluation procedure; usual research on the subject is based on BBSE (Bull Breeding Soundness Examination) methodologies, which have significant limitations in terms of their evaluation procedure, such as high cost, time-consuming and administratively difficult. This research focuses on the creation of a prediction model to supplement and/or improve the BBSE approach, through the study of two algorithms, Clustering and Artificial Neural Network (ANN), to find the optimum Machine Learning (ML) approach for our application, with an emphasis on data categorization accuracy. The tool is designed to assist veterinary medicine and farmers in identifying key factors and increasing certainty in their decision-making during the selection of bulls for breeding purposes, providing data from a limited number of factors generated from a deep pairing study of bulls. Zebu Bulls, European Bulls, and Crossbred Bulls were the general groupings. The data utilized in the model's creation (N =359) considers five variables that influence improvement decisions. This approach enhances decision-making by 12%. ANN obtained an accuracy of 90%; Precision was 97% for satisfying, 92% for unsatisfying, and 85% for Bad.

Many complex networks have a connectivity that might be only partially detected or that tends to grow over time, hence the prediction of non-observed links is a fundamental problem in network science. The aim of topological link prediction is to forecast these non-observed links by only exploiting features intrinsic to the network topology. It has a wide range of real applications, like suggesting friendships in social networks or predicting interactions in biological networks.The Cannistraci-Hebb theory is a recent achievement in network science that includes a theoretical framework to understand local-based link prediction on paths of length n. In this study we introduce two innovations: theory of modelling (science) and theory of realization (engineering). For the theory of modelling we first recall a definition of network automata as a general framework for modelling the growth of connectivity in complex networks. We then show that several deterministic models previously developed fall within this framework and we introduce novel network automata following the Cannistraci-Hebb rule. For the theory of realization, we present how to build adaptive network automata for link prediction, which incorporate multiple deterministic models of self-organization and automatically choose the rule that better explains the patterns of connectivity in the network under investigation. We compare Cannistraci-Hebb adaptive (CHA) network automaton against state-of-the-art link prediction methods such as structural perturbation method (SPM), stochastic block models (SBM) and artificial intelligence algorithms for graph embedding. CHA displays an overall higher link prediction performance across different evaluation frameworks on 1386 networks. Finally, we highlight that CHA offers the key advantage to explicitly explain the mechanistic rule of self-organization which leads to the link prediction performance, whereas SPM and graph embedding not. In comparison to CHA, SBM unfortunately shows irrelevant and unsatisfactory performance demonstrating that SBM modelling is not adequate for link prediction in real networks.

The manuscript presents a novel approach to designing and fabricating a stretchable patch antenna designed for strain sensing and wireless communication of sensing data at the same time. The challenge lies in combining flexible and stretchable textile materials with different physical mor-phologies, which can hinder adhesion among multiple layers when stacked up, resisting the overall stretchability of the antenna. The proposed antenna design overcomes this challenge by incorpo-rating a lattice hinge pattern in the non-stretchable conductive e-textile, transforming it into a stretchable structure. The innovative design includes the longitudinal cuts inserted in both the patch and the ground plane of the antenna, allowing it to stretch along in the perpendicular direction. Implementing the lattice hinge pattern over the conductive layers of the proposed patch antenna in combination with a 2 mm thick Polydimethylsiloxane (PDMS) substrate achieves a maximum of 25% stretchability compared to its counterpart antenna without lattice hinge design. The stretchable textile antenna resonates around a frequency of 2.45 GHz and exhibits a linear resonant frequency shift when strained up to 25%. This characteristic makes it suitable for use as a strain sensor. Ad-ditionally, the lattice hinge design enhances the conformability and flexibility of the antenna compared to a solid patch antenna. The realized antenna gains in the E and H-plane were measured as 2.21 dBi and 2.34 dBi, respectively. Overall, the presented design offers a simple and effective solution for fabricating a stretchable textile patch antenna for normal use or as a sensing element, opening up possibilities for applications in communication and sensing fields.

This paper presents the implementation of a control strategy based on fuzzy logic artificial intelligence (AI) for speed regulation of an electromagnetic frequency regulator (EFR) prototype, aiming to eliminate the dependence on knowledge of physical parameters in the most diverse operating conditions. Speed multiplication is one of the most important steps in power generation wind. Gearboxes are generally used for this purpose. However, they have a reduced lifespan and a high failure rate and are still noise sources. The search for new ways to match the speed (and torque) between the turbine and the generator is an important research area to increase the energy, financial and environmental efficiency of wind systems. The EFR device is an example of an alternative technology that this team of researchers has proposed. It counts the fact of taking advantage of the main advantages of an induction machine with the rotor in a squirrel cage positively. In the first studies, the EFR control strategy consisted of the conventional PID controllers, which has several limitations widely discussed in the literature. This strategy also limits the EFR's performance, considering its entire operating range. The simulation program was developed using the Matlab/Simulink platform, while the experimental results were obtained in the laboratory emulating the EFR-based system. The EFR prototype used has 2 poles, a nominal power of 2.2 kW, and a nominal frequency of 60 Hz. Experimental results were presented to validate the efficiency of the proposed control strategy.

Sparse training (ST) aims to ameliorate deep learning by replacing fully connected artificial neural networks (ANNs) with sparse or ultra-sparse ones, such as brain networks are, therefore it might benefit to borrow brain-inspired learning paradigms from complex network intelligence theory. Here, we launch the ultrasparse advantage challenge, whose goal is to offer evidence on the extent to which ultra-sparse (around 1% connection retained) topologies can achieve any leaning advantage on fully connected. Epitopological learning is a field of network science and complex network intelligence that studies how to implement learning on complex networks by changing the shape of their connectivity structure (epitopological plasticity). One way to implement Epitopological (epi- means new) Learning is via link prediction: predicting the likelihood of nonobserved links to appear in the network. Cannistraci-Hebb learning theory inspired the CH3-L3 network automata rule for link prediction which is effective for general-purpose link prediction. Here, starting from CH3-L3 we propose Epitopological Sparse Meta-deep Learning (ESML) to apply Epitopological Learning to sparse training. In empirical experiments, we find that ESML learns ANNs with ultra-sparse hyperbolic (epi-)topology in which emerges a community layer organization that is meta-deep (meaning that each layer also has an internal depth due to powerlaw node hierarchy). Furthermore, we discover that ESML can in many cases automatically sparse the neurons during training (arriving even to 30% neurons left in hidden layers), this process of node dynamic removal is called percolation. Starting from this network science evidence, we design Cannistraci-Hebb training (CHT), a 4-step training methodology that put ESML at its heart. We conduct experiments on 6 datasets and 3 network structures (MLPs, VGG16, ResNet50) comparing CHT to dynamic sparse training SOTA algorithms and fully connected network. The results indicate that, with a mere 1% of links retained during training, CHT surpasses fully connected networks on VGG16 and ResNet50. This key finding is an evidence for ultra-sparse advantage and signs a milestone in deep learning. CHT acts akin to a gradient-free oracle which adopts CH3-L3 based epitopological learning to guide the placement of new links in the ultra-sparse network topology to facilitate sparse-weight gradient learning, and this in turn reduces the convergence time of ultra-sparse training. Finally, CHT offers first examples of parsimony dynamic sparse training because, in many datasets, it canretain network performance by percolating and significantly reducing the node network size.

We propose a neural-network-based watermarking method that introduces the quantized activation function that approximates the quantization of JPEG compression. Many neural-network-based watermarking methods have been proposed. Conventional methods have acquired robustness against various attacks by introducing an attack simulation layer between the embedding network and the extraction network. The quantization process of JPEG compression was replaced by the noise addition process in the attack layer of the conventional methods. In this paper, we propose a quantized activation function that can simulate the JPEG quantization standard as it is in order to improve the robustness against the JPEG compression. Our quantized activation function consists of several hyperbolic tangent functions and is applied as an activation function for neural networks. Our network was introduced in the attack layer of ReDMark proposed by Ahmadi et al. to compare it with their method. That is, the embedding and extraction networks had the same structure. We compared the usual JPEG compressed images and the images applying the quantized activation function. The results showed that a network with quantized activation functions can approximate JPEG compression with high accuracy. We also compared the bit error rate (BER) of estimated watermarks generated by our network with those generated by ReDMark. We found that our network was able to produce estimated watermarks with lower BERs than those of ReDMark. Therefore, our network outperformed the conventional method with respect to image quality and BER.

This paper presents a novel approach for individual design perception modeling using the YUKI-trained Fuzzy Inference System. The study focuses on understanding how individuals perceive design based on personality traits, particularly openness to experience. The proposed YUKI algorithm optimizes the FCM clustering algorithm, enhancing its ability to handle uncertain and imprecise data. The YUKI-trained FIS generates several Sugeno-type FIS models to predict design perception, to minimize the Root Mean Squared Error between the model prediction and the actual design perception of participants. The results demonstrate that the YUKI-trained FIS offers more accurate predictions compared to the traditional FCM-trained FIS, and the RMSE values for individual design perceptions fall within a satisfactory range of 0.84 to 1.32. The YUKI-trained FIS proves effective in clustering individuals based on their level of openness, providing insights into how personality traits influence design perception.

A reinforcement learning algorithm is proposed to improve the accuracy of short-term load forecasting (STLF) in this article. The proposed model integrates radial basis function neural network (RBFNN), support vector regression (SVR), and adaptive annealing learning algorithm (AALA). In the proposed methodology, firstly, the initial structure of RBFNN is determined by using SVR. Then, an AALA with time-varying learning rates is used to optimize the initial parameters of SVR-RBFNN (AALA-SVR-RBFNN). In order to overcome the stagnation for searching optimal RBFNN, a particle swarm optimization (PSO) is applied to simultaneously find promising learning rates in AALA. Finally, the short-term load demands are predicted by using the optimal RBFNN. The performance of the proposed methodology is verified on the actual load dataset from Taiwan Power Company (TPC). Simulation results reveal that the proposed AALA-SVR-RBFNN can achieve a better load forecasting precision as compared to various RBFNNs.

The fault diagnosis of safety critical systems such as wind turbine installations includes extremely challenging aspects that motivate the research issues considered in this paper. In fact, the prompt detection and the reliable diagnosis of faults in their earlier occurrence represent the key point especially for offshore installations. For these plants, operation and maintenance procedures in harsh environments would inevitably increase the cost of the energy production. Therefore, this work investigates fault diagnosis solutions that are considered in a viable way and used as advanced techniques for condition monitoring of dynamic processes. To this end, the work proposes the design of fault diagnosis strategies that exploit the estimation of the fault by means of data--driven approaches. This solution leads to the development of effective methods allowing the management of partially unknown information of the system dynamics, while coping with measurement errors, the model--reality mismatch and other disturbance effects. In mode detail, the proposed data--driven methodologies exploit fuzzy systems and neural networks in order to estimate the nonlinear dynamic relations between the input and output measurements of the considered process and the faults. To this end, the fuzzy and neural network structures are integrated with auto--regressive with exogenous input descriptions, thus making them able to approximate unknown nonlinear dynamic functions with arbitrary degree of accuracy. Once these models are estimated from the input and output data measurement acquired from the considered dynamic process, the capabilities of their fault diagnosis capabilities are validated by using a high--fidelity benchmark that simulates the healthy and the faulty behaviour of a wind turbine system. Moreover, at this stage the benchmark is also useful to analyse the robustness and the reliability characteristics of the developed tools in the presence of model--reality mismatch and modelling error effects featured by the wind turbine simulator. On the other hand, a hardware--in--the--loop tool is finally implemented for testing and comparing the performance of the developed fault diagnosis strategies in a more realistic environment and with respect to different fault diagnosis approaches.

Emergency control load-shedding is a key solution to prevent blackouts in the power system. This paper proposed a new model of emergency controls load shedding based on the fast identification of the unstable state of the power system. K-means clustering algorithm divided the instability mode into the clusters. The results of analysis of this cluster were used as the basis for classification control. Building load shedding strategies is consisted of the pre-designed rules based on AHP algorithm. When the recognition of the power system “instability” is detected, the signal of load shedding control is triggered immediately, therefore the decision time is greatly shortened comparing to the traditional methods. The effectiveness of the proposed method was tested on the IEEE 39-bus to overcome the limitations of the last traditional methods.

ABSTRACT Purpose: Tongue image analysis for disease diagnosis is an ancient traditional non-invasive diagnosis technique widely used by traditional medicine practitioners. Deep Learning based multi-label disease detection models offer tremendous potential to clinical decision support systems, by facilitating preliminary diagnosis. Methods: In this work, we propose a multi-label disease detection pipeline, where in observation and analysis of tongue images captured and received via smartphones assist in predicting the health status of an individual. All images are voluntarily given by subjects consulting collaborating physicians. Images thus acquired are first and foremost classified either into a diseased or a normal category by a 5-fold cross-validation algorithm using a convolution neural network (MobileNetV2) model for binary classification. Once the diseased label is predicted, the image is used to diagnose multiple diseases using the prediction algorithm based on DenseNet121. Results: Average accuracy of 93 % was achieved in classifying diseased from normal healthy tongue by detection model with MobileNetV2 architecture. Multilabel disease classification produced more than 90% accurate results for the seven class labels considered. Conclusion: AI based image analysis shows promising results and an extensive dataset could provide further improvements to this approach. Rather than employing high-cost sophisticated image capturing setup, experimenting with smartphone images opens opportunity to provide preliminary health status to individuals on smartphone prior to further line of treatment and diagnosis.

Geospatial Information Systems (GIS) can provide a great environment for using machine learning algorithm for spatial data such as satellite images. Integrating this functionality with artificial intelligence algorithms for analyzing spatial data enables us to predict challenging disasters such as deforestation. Deforestation as an environmental problems has been recorded the most serious threat to environmental diversity and one of the main components of land-use change. In this paper, we investigate spatial distribution of deforestation using artificial neural networks and satellite imagery. We modeled deforestation process using various factors in determining the relationship between deforestation and environmental and socioeconomic factors. Hence, for this purpose, the proximity to roads and habitats, fragmentation of the forest, height from sea level, slope, and soil type are considered in the model. In this research, we modeled land cover changes (forests) to predict deforestation using an artificial neural network due to its significant potential for the development of nonlinear complex models. The procedure involves image registration and error correction, image classification, preparing deforestation maps, determining layers, and designing a multi-layer neural network to predict deforestation. The satellite images for this study are of a region in Hong Kong which are captured from 2012 to 2016. The results of the study demonstrate that neural networks approach for predicting deforestation can be utilized and its outcomes show the areas that destroyed during the research period.

The main purpose of this article is to identify brain diseases such as Alzheimer's and Parkinson's in an intelligent way using Python software and processing the function of neurons in the neural network areas of the brain, which are classified into different components, and the data is based on the information obtained from FMRI images using algorithms artificial intelligence can intelligently diagnose the type of disease. Therefore, by using spatial clustering based on the deep learning method with noise algorithm (DBSCAN), fMRI brain image and fMRI brain surface complexity are classified, and then image preprocessing will be applied to fMRI images by using artificial intelligence neural networks (ANN) algorithm. became. Then, by using the ANN algorithm and Deep CNN topology of the brain neural network, the type of disease in the brain can be diagnosed by simulating the performance of an artificial neural network (ANN) in Python software. Deep machine learning-based methods, especially algorithms based on neural networks, have shown great success in medical image analysis for various tasks including brain tumor detection, segmentation, and classification, and Alzheimer's and epilepsy. In this research, we propose an integrated model based on a convolutional neural network for simultaneous recognition and classification of brain diseases for intelligent diagnosis of tumors and epilepsy. The average accuracy obtained from our proposed model is 97.89 percent accuracy and 91.66 percent specificity.

Aimed for the difficulty and complexity of detecting the piston error for segmented telescope, this paper proposed a new piston error measurement method based on a hybrid artificial neural net-work. Firstly, we use Resnet network to learn the mapping relationship between the focal plane degradation image and the signs of the piston error. Then, based on the established theoretical re-lationship between modulation transfer function and the piston error, BP neural network is used here to learn the mapping relationship between the MTF and the absolute value of the piston error. After the training of the hybrid network is completed, a wide-range and high-precision detection of the piston error of the sub-mirrors can be achieved using the combined output of the two net-works only a focal plane image of a point source with broadband illumination is used as input. The detection range can reach the whole coherent length of the input broadband light, and the detec-tion accuracy can reach 10nm. The method proposed in this paper has the advantages of high de-tection accuracy, wide detection range, low hardware cost, small network scale and low training difficult.

This research addresses the formidable challenge of achieving precise trajectory tracking for autonomous vehicle formations in uncertain environments. It introduces an adaptive control system tailored for autonomous vehicles, with a primary focus on ensuring prescribed performance in trajectory tracking within a leader-follower formation paradigm. The system incorporates a guidance law that allows the leader vehicle to dynamically adjust desired yaw angles and speeds for follower vehicles based on the established reference trajectory, enhancing tracking accuracy and responsiveness to environmental changes. To address practical external disturbances, the study utilizes Radial Basis Function Neural Networks (RBFNN) in conjunction with second-order filters for error approximation. This approach is further strengthened by a carefully formulated adaptive law. The innovative integration of a barrier Lyapunov function with the backstepping method significantly enhances the system’s adaptability and robustness, ensuring trajectory tracking performance meets predetermined standards. Simulation results illustrate the control system’s adept handling of various external disturbances, consistently maintaining trajectory tracking errors within predefined limits. This underscores the system’s potential to markedly enhance the operational reliability and efficiency of autonomous vehicle formations in unpredictable environmental conditions.

In recent years, Edge Intelligence (EI) has emerged, combining edge computing with AI, specifically deep learning, to run AI algorithms directly on edge devices. In practical applications, EI faces challenges related to computational power, power consumption, size, and cost, with the primary challenge being the trade-off between computational power and power consumption. This has rendered traditional computing platforms unsustainable, making heterogeneous parallel computing platforms a crucial pathway for implementing EI. In our research, we leveraged the Xilinx Zynq 7000 heterogeneous computing platform, employed High-Level Synthesis (HLS) for design, and implemented two different accelerators for LeNet-5 using loop unrolling and pipelining optimization techniques. The experimental results show that when running at a clock speed of 100 MHz, the PIPELINE accelerator, compared to the UNROLL accelerator, experiences an 8.09% increase in power consumption but speeds up by 14.972 times, making the PIPELINE accelerator superior in performance. Compared to the CPU, the PIPELINE accelerator reduces power consumption by 91.37% and speeds up by 70.387 times, while compared to the GPU, it reduces power consumption by 93.35%.This study provides two different optimization schemes for edge intelligence applications through design and experimentation, and demonstrates the impact of different quantization methods on FPGA resource consumption. These experimental results can provide a reference for practical applications, thereby providing a reference hardware acceleration scheme for edge intelligence applications.

A Mamdani-type fuzzy-logic model has been developed to link Mediterranean seagrass abundance to the prevailing environmental conditions. Big Databases, as UNEP-WCMC (seagrass abundance), CMEMS and EMODnet (oceanographic/environmental) and human-impact parameters were utilized for this expert system. Model structure and input parameters were tested according to their capacity to accurately predict seagrass families at specific locations. The optimum FIS comprised of four input variables: water depth, sea surface temperature and nitrates and bottom chlorophyll-a concentration, exhibiting fair accuracy (76%). Results illustrated that Posidoniaceae prefers cool (16-18oC) and low chlorophyll-a presence (< 0.2 mg/m3); Zosteraceae favors cool (16-18oC) and mesotrophic waters (Chl-a > 0.2 mg/m3), but also slightly warmer (18-19.5 oC) with lower Chl-a levels (< 0.2 mg/m3); Cymodoceaceae lives from warm, oligotrophic (19.5-21.0oC and Chl-a < 0.3 mg/m3) to moderately warm mesotrophic sites (18-21.3oC and 0.3 – 0.4 mg/m3 Chl-a). Finally, Hydrocharitaceae thrives in warm Mediterranaean waters (21-23oC) of low chlorophyll-a content (< 0.25 mg/m3). Climate change scenarios showed that Posidoniaceae and Zosteraceae tolerate bathymetric changes, Posidoniaceae and Zosteraceae are mostly affected by sea temperature rise, while Hydrocharitaceae exhibits tolerance in higher sea temperature rise. This FIS could be used by national and regional policy-makers and public authorities.

Recommender systems as an effective information filtering system can be used to obtain information through the user's explicit or implicit behavior. On the one hand finding items that may be of interest to the user. On the other hand, the recommendation facilitates the interaction between the user and the item to increase the revenue. Recommender systems have been widely used in various fields, such as e-commerce, travel recommendation, online books and movies, social networks, etc, which can satisfy the intrinsic implicit needs of users through personalized services. In recent years, the development of deep learning has further improved the performance of recommendation systems. Although these methods improve the performance of the recommendation system, when the number of users and products increases, the recommendation system may face sparsity and cold start problems, and thus cannot achieve personalized recommendations. Knowledge graphs, which are structured data, have become the choice of many algorithms due to the high quality and wide scale of the data, and therefore many recommendation algorithms combined with knowledge graphs have emerged as a popular new direction in recommendation systems. These algorithms are able to preserve the rich connections between different entities. Moreover, when constructing the features of an entity, the entities that are far away from the central entity can also be utilized. Entities are no longer only directly connected to each other. To address the shortcomings of existing recommendation algorithms, this paper designs the recommendation algorithm GPRE using graph neural networks. GPRE focuses on expressing the user's features. The graph neural network provides GPRE with a strong generalization capability for modeling, which can provide long-range semantics between users and entities, as well as selective entity selection in the auxiliary graph neural network. Explicit semantic links are established between remote and central nodes to reduce the introduction of noise. In this paper, experiments are conducted on real-world datasets and the results are compared with baselines. The experimental results show that GPRE performs well on the experimental dataset.

Due to the ongoing global warming on the Earth, permafrost degradation has been extensively taking place, which poses a substantial threat to civil and industrial facilities and infrastructure elements, as well as to the utilization of natural resources in the Arctic and high-latitude regions. In order to prevent the negative consequences of permafrost thawing under the foundations of constructions, various geophysical techniques for monitoring permafrost have been proposed and applied so far: temperature, electrical, seismic and many others. At the same time, non-stationary electromagnetic methods seem to have significant potential and a number of important practical advantages. We propose a cross-borehole exploration system for the highest localization of target objects in the cryolithozone. A novel mathematical apparatus for three-dimensional modeling of transient electromagnetic (TEM) signals by the vector finite element method has been developed. The original combination of the latter, the Sumudu integral transform and artificial neural networks makes it possible to examine spatially heterogeneous objects of the cryolithozone with a high contrast of geoelectric parameters, significantly reducing computational costs. We have studied the sensitivity of the TEM signals to the boundary between thawed and frozen rocks depending on the inter-borehole distance and spatial orientations of the transmitters and receivers. Numerical simulation results of the TEM monitoring of industrial facilities located on permafrost are considered. The formation of a talik has been shown to significantly manifest itself in the measured electromagnetic responses, which enables timely prevention of industrial disasters and environmental catastrophes.

A block-diagonal fuzzy neural network for short-term load forecasting is proposed. DBD-FELF consists of fuzzy rules with consequent parts that are neural networks with internal recurrence. These networks have a hidden layer which consists of pairs of neurons with feedback connections between them. The overall fuzzy model partitions the input space in partially overlapping fuzzy regions, where the recurrent neural networks of the respective rules operate. The partition of the input space and determination of the fuzzy rule base is performed by use of Fuzzy C-Means clustering algorithm and the RENNCOM constrained optimization method is applied for consequent parameter tuning. The electric load time-series of the Greek power system is examined, and hourly-based forecasting for the whole year is performed. The performance of DBD-FELF is tested via extensive experimental analysis and the results are promising, since an average percentage error of 1.18% is attained, along with an average yearly absolute error of 76.2 MW. Moreover, DBD-FELF is compared with Deep Learning, fuzzy and neurofuzzy rivals, such that its particular attributes are highlighted.

The most important issue in integrated next generation wireless systems (NGWS) by fourth generation networks which consists of various wireless architectures extending from cellular networks to satellite networks is to allow everyone around the world to connect seamlessly to applications anywhere at any time through the best network. Heterogeneous networks have created many challenges such as mobility management, handoff, resource management. For always best connectivity the selection of parameters plays an important role in the decision of vertical handoff, some of parameters are depend upon MT and some are depend upon the network conditions . In this paper we designed Intelligent Vertical Handoff based on Fuzzy Logic Decision model ( IVH-FL), IVH-FL model which has five parameters for vertical handoff decision : Received Signal Strength (RSS), Available bandwidth (B), Users Preference (UP), Mobile Speed (SM) and Power Consumption (PC), with the help of Fuzzy Logic tool box and concept of fuzzy linguistic variables. The results confirmed improvement performance , and reduced the number of unnecessary handover .

In this paper, we are proposing a bio-inspired location management (LM) technique for personal communication system (PSC). It is based on artificial immune system (AIS), with self-adaptation and self-updates attributes in order to perform the location management, and work helps to achieve the better quality of service (QoS) and quality of experience (QoE) for the mobile users. Here, we are suggesting a modified mobile switching center (MSC) architecture, and an adaptive self-modified location management procedure. The proposed mobile switching centre architecture has an advantage of rule-based and fact-based system to store the rules and fact related to location management procedure, and it shows the intelligent behavior of system. The mobile switching centre calculates the best method for location management and rule-base system trigged the rules to perform the techniques. The system stores the result (techniques for location management) in fact-base system for future use. The efficiency and effectiveness of the proposed techniques been analyzed, and it observed that the proposed system has 45-50% improvement in performance over the current location management techniques. Here, we are taking the performance parameters such as signaling cost, database update cost, overhead measurement, mobility management cost.

This paper reviews non-intrusive load monitoring (NILM) approaches that employ deep neural networks to disaggregate appliances from low frequency data, i.e. data with sampling rates lower than the AC base frequency. We first review the many degrees of freedom of these approaches, what has already been done in literature, and compile the main characteristics of the reviewed publications in an extensive overview table. The second part of the paper discusses selected aspects of the literature and corresponding research gaps. In particular, we do a performance comparison with respect to reported MAE and F$_1$-scores and observe different recurring elements in the best performing approaches, namely data sampling intervals below 10\,s, a large field of view, the usage of GAN losses, multi-task learning, and post-processing. Subsequently, multiple input features, multi-task learning and related research gaps are discussed, the need for comparative studies is highlighted, and finally, missing elements for a successful deployment of NILM approaches based on deep neural networks are pointed out. We conclude the review with an outlook on possible future scenarios.

The principal minimum horizontal stress plays an important role in the study of reservoir characteristics, modeling of oil and gas reservoir, drilling, production and stimulating wells. However, it is currently not possible to measure the minimum horizontal stress along the wellbore as a geophysical parameter logging. Minimum horizontal stress is measured by leak-off test (LOT) at only several points in a well. In order to have the values all along the wellbore, experimental formulas were established to determine the minimum horizontal stresses for different fields. Then these formulas must be calibrated with LOT data whose number is usually limited, even sometimes unavailable. On the other hand, the empirical formulas of one field might not be accurate for another. This study presents a new approach to solve the problem of minimum horizontal stress estimation by a combination of artificial intelligence and geostatistics. The method consists of using artificial neural network (ANN) to build a model of minimum horizontal stress estimation from relevant parameters such as true vertical depth, pore pressure and vertical stress, then combined with Kriging interpolation to obtain the distribution in space of the minimum horizontal stress. Hence, this method can estimate the minimum horizontal stress with a limited amount of available data and therefore we do not need to drill new wells or to find empirical formulas for each survey area. The method was then applied in a case study involved real geomechanical dataset of Hai Thach - Moc Tinh field in Nam Con Son basin, Vietnam.

Timely diagnosis of Alzheimer's diseases(AD) is crucial to obtain more practical treatments. In this paper, a novel approach Based on Multi-Level Fuzzy Neural Networks (MLFNN) for early detection of AD is proposed. The focus of study was on the problem of diagnosing AD and MCI patients from healthy people using MLFNN and selecting the best feature(s) and most compatible classification algorithm. In this way, we achieve an excellent performance using only a single feature i.e. MMSE score, by fitting the optimum algorithm to the best area using optimum possible feature(s) namely one feature for a real life problem. It can be said, the proposed method is a discovery that help patients and healthy people get rid of painful and time consuming experiments. Experiments shows the effectiveness of proposed method in current research for diagnosis of AD with one of the highest performance (accuracy rates of 96.6%), ever reported in the literature.

The operation of transformers suffers from natural or man-made disasters, subjecting the equipment to prolonged exposure to temperature, lightning strikes, transient over-voltages, and over-current, gradually producing insulation aging phenomenon, which results in partial discharges within the transformer. Without dealing with it beforehand properly, it may lead to insulation breakdown. Nowadays, with the mature development of microchip control technology and wireless communication technology, which is helpful for realizing the research for online real-time and long-term monitoring capabilities for power equipment. A transformer operating condition monitoring and diagnostic system that can rapidly and effectively prevent the breakdown of transformer insulation, which can impact the overall power supply system is developed in this paper. The system is divided into two parts based on its function. The first part is the operating condition monitoring and real-time alert unit for the transformer, primarily composed of an embedded computing module, a sensor module, and a transmission module. Its work content is to capture real-time online partial discharge ultrasonic signals and high frequency current comparator pulse signals, and analyze and determine the condition of the internal insulation and operational status whether it is fault or not. The second part is the central control unit, consisting mainly of an industrial computer and a transmission module. Its work content is to store the ultrasonic and high frequency current comparator pulse signals from the transformer operation monitoring and real-time alert unit. It uses the software to eliminate signal noise and interference, and then utilizes artificial neural networks to identify the type of fault. In this paper, the research for the phenomenon of insulation degradation in transformer equipment aims to establish aging trend profiles through the dual malfunctioning alert and aging process analysis, as well as the long-term measurement of ultrasonic signals from partial discharges and high-frequency current comparator pulse signals. This approach provides crucial reference data and a foundation for disposable on-site measurement, assessing the phenomenon of insulation aging stages, defects and damage of the transformers effectively. It allows for timely replacement or maintenance in advance, achieving the prevention of malfunctioning and predictive diagnosis of aging.

With the exponential growth of machine learning and development of Artificial Neural Network (ANNs) in recent years, there is great opportunity to leverage this approach and accelarate bio-logical discoveries through applications on the analysis of bioinformatics data. Various types of datasets including for example protein or gene interaction networks, molecular structures and cellular signalling pathways, have already been used for machine learning by training ANNs for inference and pattern classification. However, unlike regular data structures that are commonly used in the computer science and engineering fields, bioinformatics datasets present challenges that require unique algorithmic approaches. The recent development of the geometric and deep learning approach within the machine learning field, is very promising towards accelerating analysis complex bioinformatics datasets. The principles of ANNs and their importance for bio-informatics machine learning is demonstrated herein, through presentation of the undelying mathematical and statistical foundations from group theory, symmetry, linear algebra. Further-more, the structure and functions of ANN algorithms that form the core principles of artificial intelligence are explained, in relation to the bioinformatics data domain. Overall, the manuscript provides guidance for researchers to understand the principles required for practicing machine learning and artificial intelligence, with the special considerations towards bioinformatics applications.

Due to the significant price difference, expensive oils like olive oil are often blended with cheaper edible oils. This practice of adulteration in edible oils, aimed at increasing profits for producers, poses a major concern for consumers. Furthermore, adulteration in edible oils can lead to various health issues impacting consumer well-being. In order to meet the requirements of fast, non-destructive, universal, accurate and reliable quality testing for edible oil, the oblique-incidence reflectivity difference (OIRD) method combined with machine learning algorithms was introduced to detect a variety of edible oils. The prediction accuracy of Gradient Boosting, K-Nearest Neighbor, and Random Forest models exceeded 95%. Experimental results indicate that the OIRD method can serve as a powerful tool for detecting edible oils.

Optical artificial neural networks (ONNs) — analog computing hardware tailored for machine learning [1,2] — have significant potential for ultra-high computing speed and energy efficiency [3]. We propose a new approach to architectures for ONNs based on integrated Kerr micro-comb sources [4] that is programmable, highly scalable and capable of reaching ultra-high speeds. We experimentally demonstrate the building block of the ONN — a single neuron perceptron — by mapping synapses onto 49 wavelengths of a micro-comb to achieve a high single-unit throughput of 11.9 Giga-FLOPS at 8 bits per FLOP, corresponding to 95.2 Gbps. We test the perceptron on simple standard benchmark datasets — handwritten-digit recognition and cancer-cell detection — achieving over 90% and 85% accuracy, respectively. This performance is a direct result of the record small wavelength spacing (49GHz) for a coherent integrated microcomb source, which results in an unprecedented number of wavelengths for neuromorphic optics. Finally, we propose an approach to scaling the perceptron to a deep learning network using the same single micro-comb device and standard off-the-shelf telecommunications technology, for high-throughput operation involving full matrix multiplication for applications such as real-time massive data processing for unmanned vehicle and aircraft tracking.

Accurate evaluation of health status of lithium-ion batteries must be deemed as of great significance, insofar as utility and safety of batteries are of concern. Lithium plating, in particular, is notoriously known to be a chemical reaction that can cause deterioration in, or even fatal hazards to, the health of lithium-ion batteries. Electrochemical impedance spectroscopy (EIS), which has distinct advantages such as fast or non-destructive over its competitors, suffices in detecting lithium plating and thus has been attracting increasing attention in the field of battery management, but its ability of assessing quantitatively the degree of lithium plating remains largely unexplored hitherto. On this point, this work seeks to narrow that gap, by proposing an EIS-based method that can quantify the degree of lithium plating. The core conception is to eventually circumvent the reliance on state-of-health measurement, and use instead the impedance spectrum, to acquire an estimate on battery capacity loss. To do so, the effects of solid electrolyte interphase formation and lithium plating on battery capacity must be first decoupled, so that the mass of lithium plating can be quantified. Then, based on an impedance spectrum measurement, the parameters of the fractional equivalent circuit model (ECM) of the battery can be identified. These fractional ECM parameters are received as inputs by an artificial neural network, which is tasked to establish a correspondence between the model parameters and the mass of lithium plating. The empirical part of the work revolves around the data collected from an aging experiment, and the validity of the proposed method is truthfully attested by dismantling the batteries, which is otherwise not needed during the actual uptake of the method.

Due to the complex underground environment, pumping machines are prone to produce numerous failures. The indicator diagrams of faults are similar in a certain degree, which produces indistinguishable samples. As the samples increases, manual diagnosis becomes difficult, which decreases the accuracy of fault diagnosis. For accurately and quickly judging the fault type, we propose an improved adaptive activation function and apply it to five types of neural networks. The adaptive activation function improves the negative semi-axis slope of the ReLU activation function by combining the gated channel conversion unit to improve the performance of the deep learning model. The proposed adaptive activation function is compared with the traditional activation function through the fault diagnosis data set and the public data set. The results show that the activation function has better nonlinearity, can improve the generalization performance of deep learning model, the accuracy of fault diagnosis. In addition, the proposed adaptive activation function can also be well embedded in other neural networks.

In this work we present the results obtained with an artificial neural network (ANN) which we trained to predict the expected output of high-order harmonic generation (HHG) process, while exploring a multi-dimensional parameter space. We argue on the utility and efficiency of the ANN model and demonstrate its ability to predict the outcome of HHG simulations. In this case study we present the results for a loose focusing HHG beamline, where the changing parameters are: the laser pulse energy, gas pressure, gas cell position relative to focus and gas cell length. The physical quantity which we predict here using ANN is directly related to the total harmonic yield in a specified spectral domain (20-40 eV). We discuss the versatility and adaptability of the presented method.

This paper proposed an optimal tracking control scheme through adaptive dynamic programming(ADP) for a class of partially unknown discrete-time nonlinear systems based on radial basis function neural network(RBF-NN). In order to acquire the unknown system dynamics, we use two RBF-NNs, the one is used to construct the identifier, and the another is used to directly approximate the steady-state control input, where a novel adaptive law is proposed to update neural network weights. While the optimal feedback control and the cost function are derived via feedforward neural networks approximating, it is proposed to regulate the tracking error, the critic network and the actor network are then trained online to obtain the solution of the associated Hamilton–Jacobi–Bellman (HJB) equation being built under the ADP framework. Simulations verify the effectiveness of the optimal tracking control technique using the neural networks.

In this effort we propose a data-driven learning framework for reduced order modeling of fluid dynamics. Designing accurate and efficient reduced order models for nonlinear fluid dynamic problems is challenging for many practical engineering applications. Classical projection-based model reduction methods generate reduced systems by projecting full-order differential operators into low-dimensional subspaces. However, these techniques usually lead to severe instabilities in the presence of highly nonlinear dynamics, which dramatically deteriorates the accuracy of the reduced-order models. In contrast, our new framework exploits linear multistep networks, based on implicit Adams-Moulton schemes, to construct the reduced system. The advantage is that the method optimally approximates the full order model in the low-dimensional space with a given supervised learning task. Moreover, our approach is non-intrusive, such that it can be applied to other complex nonlinear dynamical systems with sophisticated legacy codes. We demonstrate the performance of our method through the numerical simulation of a two-dimensional flow past a circular cylinder with Reynolds number Re = 100. The results reveal that the new data-driven model is significantly more accurate than standard projection-based approaches

Electronic-health applications rely on large computer networks to facilitate patients' information access and to communicate various types of medical data. To examine the effectiveness of these networks, the traffic parameters need to be analysed. Due to quantity of the information carrying packets, examining each packet's transmission parameters individually is not practical, especially when a real time operation is needed. Sampling allows a subset of packets that accurately represents the original traffic to be formed. In this study an adaptive sampling method based on regression and fuzzy inference system was developed. It dynamically updates the number of packets sampled by responding to the traffic variations. Its performance was found to be superior to the conventional non-adaptive sampling methods.

This paper presents a novel real time control strategy on four-wheel independent steering system for electric vehicle with stepper motors using neural networks combined with fuzzy logic. The control of the four wheels is based on a variation of Hopfield Neural Network (VHNN) method, in which the input is the error of each steering motor and the output is processed by a hyperbolic tangent function (HTF) feeding the fuzzy logic controller (FLC), which ultimately drives the stepper motor. The whole system is made up of the four aforementioned blocks where they work in sync and inseparable from each other with the common goal of driving all the steering stepper motors at the same time. Simulation results demonstrate that the proposed control method has strong robustness and practicability under different angles and speeds.

This paper presents an extension of the results obtained in previous work concerning the application of global optimization techniques to the design of finite strategic games with mixed strategies. In that publication the Fuzzy ASA global optimization method was applied to many examples of synthesis of strategic games with one previously specified Nash equilibrium, evidencing its ability in finding payoff functions whose respective games present those equilibria, possibly among others. That is to say, it was shown it is possible to establish in advance a Nash equilibrium for a generic finite state strategic game and to compute payoff functions that will make it feasible to reach the chosen equilibrium, allowing players to converge to the desired profile, con- sidering that it is an equilibrium of the game as well. Going beyond this state of affairs, the present article shows that it is possible to ”impose” multiple Nash equilibria to finite strategic games by following the same reasoning as before, but with a fundamental change: using the same fundamental theorem of Richard McKelvey, modifying the originally prescribed objective function and globally minimizing it. The proposed method, in principle, is able to find payoff functions that result in games featuring an arbitrary number of Nash equilibria, paving the way to a substantial number of potential applications.

Over the years, the need for autonomous systems such as drones, also known as unmanned aerial vehicles (UAVs), has significantly increased in popularity across several industries, including the military. The Internet of Battlefield Things (IoBT) represents a modern technological advancement that significantly enhances the operational efficacy of defense systems. It establishes an integrated military force by connecting individuals to intelligent technology in drones, radios, equipment, antennas and ground stations. This is achieved through the utilization of cloud and edge computing, sensors, mobile devices, embedded systems, and IoT-based systems. However, IoBT security is significantly compromised by enemies that exploit the vulnerabilities and malicious intrusions that specifically target the external environment or to obtain sensitive data. In addition, a comprehensive understanding of cyberattacks and countermeasures is essential for assuring the security of IoBT. On the other hand, as cyber threats get more complicated, trust becomes increasingly important for the security of digital systems. Within this context, the zero trust architecture contends that the security of a complex network is inherently vulnerable to internal and external threats. In defense, UAV security system applications, for example, the primary purpose of the zero trust architecture is to limit the vulnerability of military UAV systems to cyberattacks, hence reducing the possibility of data breaches and illegal entry. This study conducts a systematic review aimed at identifying different aspects of cybersecurity strategies for protecting UAV systems within the IoBT domain. Furthermore, zero trust architecture is presented in the study as an effective prospective solution to the security issues that develop in defense UAV systems.

This paper presents a novel method of restoring the electron beam (EB) measurements that are degraded by linear motion blur. This is based on a Fuzzy Inference System (FIS) and Wiener inverse filter, together providing autonomy, reliability, flexibility and real-time execution. This system is capable of restoring highly degraded signals without requiring the exact knowledge of EB probe size. The FIS is formed of three inputs, eight fuzzy rules and one output. The FIS is responsible to monitor the restoration results, grade their validity and choose the one that yields to a better grade. These grades are produced autonomously by analyzing results of Wiener inverse filter. To benchmark the performance of the system, ground truth signals obtained using an 18 um wire probe are compared with the restorations. Main aims are therefore a) Provide unsupervised deblurring for device independent EB measurement; b) Improve the reliability of the process; c) Apply deblurring without knowing the probe size. These, further facilitates the deployment and manufacturing of EB probes and probe independent and accurate EB characterization. It also makes restoration of previously collected EB measurements easier, where the probe sizes are not known or recorded.

Data-driven models based on artificial intelligence are efficiently used to solve complex problems. The quality of groundwater is of utmost importance, as it directly impacts human health and the environment. In major parts of the world groundwater is the main source of drinking water, it is essential to periodically monitor water quality. Conventional water quality monitoring techniques involve periodical collection of water samples and analysis in the laboratory. This process is expensive, time consuming and involves lot of manual labor. The aim of our study is to build an ant colony optimized neural network for predicting groundwater quality parameters. We have proposed artificial neural network comprising of six hidden layers. The approach was validated using our groundwater quality dataset of a hard rock region in the northern part of Karnataka, India. Groundwater samples were collected by us periodically from March 2014 to October 2020 from 50 wells in this region. These samples where analysed for measuring the pH, Electrical Conductivity, Na+, Ca+, Na+, K+, Mg2+, F-, Cl- and U+. The temporal dataset was split for training, testing and validation of our model. Metrics such as R2 (Coefficient of Determination), RMSE (Root Mean Squared Error), NSE (Nash–Sutcliffe efficiencies) and MAE (Mean Absolute Error) were used to evaluate the prediction error and model performance. These performance evaluation metrics indicated the efficiency of our model in predicting the temporal variation in groundwater quality parameters. The method proposed by us can be used for prediction and the temporal frequency of sample collection can be reduced to save time and cost. The results also confirm that the combination of artificial neural network with ACO is a promising tool to optimize weights while training the network, and hence will help in reasonable prediction of groundwater quality parameters.

Machine Learning (ML) has proved its capabilities in different scientific and industrial fields, but it needs to be further investigated in the construction industry for practical utilization. One of the use cases of ML is delegating the structural calculation process. In this study, to discuss ML’s capabilities in performing the work of a structural designer, calculations of concrete sections based on ACI (American Concrete Institute) as a case study were selected. At first, all manual design steps and standard considerations for a concrete beam section were coded parametrically in MATLAB. After comparing with structural design references to prove the accuracy of codes in calculating shear and bending capacities, the parametric results were used as initial data (Look−up table) for training the ML operators. Regarding different types of ML techniques and as a comparison between them, in the next steps, all essential codes for Fuzzy Logic (FL), Neural Network (NN) and Adaptive Neuro-Fuzzy Inference System (ANFIS) were coded in the same platform. The performance of the three coded ML operators to replace (delegate) standard calculations compared to direct calculations was individually investigated and displayed through parametric examples. After initial examples, the influences of the number of parameters and size of the Look−up table on the accuracy of each operator were discussed. The study concluded that although all three operators can delegate the standard calculation, the precision of the results differs considerably. In case of the desirable size of the Look−up table, ANFIS operators can represent the standard calculations with a different number of parameters and entirely high precision.

Satellite Image Time Series (SITS) is a data set which includes satellite images across several years with a high acquisition rate. Radiometric normalization is a fundamental and important preprocessing method for remote sensing applications using SITS due to the radiometric distortion caused by noise between images. Normalizing the subject image based on the reference image is a general strategy when using traditional radiometric normalization methods to normalize multi-temporal imagery (usually two scenes or three scenes in different time phases). However, these methods are not suitable for calibrating SITS because they cannot minimize the radiometric distortion between any pair of images in SITS. The existing relative radiometric normalization methods for SITS are based on linear assumptions which cannot effectively reduce nonlinear radiometric distortion caused by continuously changing noise in SITS. To overcome this problem and obtain a more accurate SITS, this study proposed a Nonlinear Radiometric Normalization Model (named NMAG) for SITS based on Artificial Neural Networks (ANN) and Greedy Algroithm (GA) . In this method, GA was used to determine the correction order of SITS and calculate the error between the image to be corrected and normalized images, which avoided the selection of a single reference image. ANN was used to obtain the optimal solution of error function, which minimized the radiometric distortion between different images in SITS. SITS composed of 21 Landsat-8 images in Tianjin City from October 2017 to January 2019 were selected to test the method. We compared NMAG with other two contrasting method (refered as CM1 and CM2), and found that the average of root mean square error $(\mu_{RMSE})$ of NMAG $(497.22)$ was significantly smaller than those of CM1 $(641.39)$ and CM2 $(543.47)$, and the accuracy of normalized SITS obtained by using NMAG has increased by 22.4\% and 8.5\% toward CM1 and CM2, respectively. These experimental results confirmed the effectiveness of NMAG in the reduction of radiometric distortion caused by continuously changing noise between images in SITS.

For Convolutional Neural Network (CNN), Depthwise Separable CNN (DSCNN) is a preferred architecture for Application Specific Integrated Circuit (ASIC) implementation on edge devices. It can benefit from a multi-mode approximate multiplier proposed in this work. The proposed approximate multiplier uses two 4-bit multiplication operations to implement a 12-bit multiplication operation by reusing the same multiplier array. With this approximate multiplier, sequential multiplication operations are pipelined in a modified DSCNN to fully utilize the PE array in the convolutional layer. This Approximate (A-DSCNN) was implemented on TSMC 40-nm CMOS process with a supply voltage of 0.9 V. At the clock frequency of 200 MHz, the design achieves 4.78 GOPs/mW while occupying 1.24 mm x 1.24 mm silicon area. Compared to conventional DSCNN implemented in a similar process node, the chip area and power consumption were reduced by 53% and 25%, while the throughput was improved by 17%.

This paper proposes two max-pooling engines, named the RTB-MAXP engine and the CMB-MAXP engine, with a scalable window size parameter for FPGA-based convolutional neural network (CNN) implementation. The max-pooling operation for the CNN can be decomposed into two stages, i.e., a horizontal axis max-pooling operation and a vertical axis max-pooling operation. These two one-dimensional max-pooling operations are performed by tracking the rank of the values within the window in the RTB-MAXP engine and cascading the maximum operations of the values in CMB-MAXP engine. Both the RBM-MAXP engine and the CMB-MAXP engine were implemented using VHSIC Hardware Description Language (VHDL) and verified by simulations. They have been employed for and tested in our CNN accelerator targeting at the CNN model YOLOv4-CSP-S-Leaky for object detection.

Artificial neural networks are a powerful tool for managing data that is difficult to process and interpret. This paper presents the study of artificial neural networks for information processing generated by an optical encoder based on the polarization of light. A machine learning technique is proposed to train the neural networks, such that the system can predict with remarkable accuracy the angular position in which the rotating element of the neuro-encoder is located, based on information provided by light’s phase shifting arrangements. The proposed neural designs show excellent performance in small angular intervals, and a methodology is proposed to avoid losing this remarkable characteristic in measurements from 0 to 180o or even to 360o. The neuro-encoder is implemented in simulation stage to obtain performance results. This study can be useful to improve capabilities of resolvers or other polyphasic sensors.

Computer systems that operate in remote locations such as satellites, remote weather stations and autonomous robots are highly limited in the availability of energy for their operation. This work aims to employ artificial intelligence algorithms in energy management in order to obtain the maximum energy yield and the prediction of energy availability to the system. The work presents the main types of algorithms used in artificial intelligence and presents the creation of a prototype that will operate as a low power system powered by batteries and a small solar plate, the prototype will perform inferences on the LSTM neural network algorithm in order to predict the future availability of energy, consequently the management system will carry out the energy distribution in order to obtain the maximum operation of the prototype without total discharge of the batteries. So that the artificial intelligence system could be embedded in the prototype, the TensorFlow Lite framework was used, which allows the inference to be carried out in devices with low consumption and limited processing power.

This paper inquires on the options pricing modeling using Artificial Neural Networks to price Apple(AAPL) European Call Options. Our model is based on the premise that Artificial Neural Networks can be used as functional approximators and can be used as an alternative to the numerical methods to some extent, for a faster and an efficient solution. This paper provides a neural network solution for two financial models, the BlackScholes-Merton model, and the calibrated-Heston Stochastic Volatility Model, we evaluate our predictions using the existing numerical solutions for the same, the analytic solution for the Black-Scholes equation, COS-Model for Heston’s Stochastic Volatility Model and Standard Heston-Quasi analytic formula. The aim of this study is to find a viable time-efficient alternative to existing quantitative models for option pricing.

Recent advancements of computer and electronic systems have motivated the extensive use of intelligent systems for automation of agricultural industries. In this study, the temperature variation of the mushroom growing room is modeled through using a multi-layered perceptron (MLP) and radial basis function networks. Modeling has been done based on the independent parameters including ambient temperature, water temperature, fresh air and circulation air dampers, and water tap. According to the obtained results from the networks, the best network for MLP is found to be the second repetition with 12 neurons in the hidden layer and 20 neurons in the hidden layer for radial basis function networks. The obtained results from comparative parameters for two networks showed the highest correlation coefficient (0.966), the lowest root mean square error (RMSE) (0.787) and the lowest mean absolute error (MAE) (0.02746) for radial basis function. Therefore, the neural networks with radial basis function was selected as the optimal predictor for the behavior of the system.

Pipeline conflicts arising from data dependencies are a common issue encountered in the hardware implementation of layered QC-LDPC decoders. This paper proposes an efficient layered decoding architecture to reduce pipeline conflicts without introducing stall cycles, by reordering the processing order offline and using the patch method based on variable-to-check message. The experimental results on the LDPC code of the IEEE802.16 standard in the OFDM-PON system demonstrate that the proposed architecture has a sensitivity improvement of 0.125 dBm and 0.375 dBm, respectively, compared with our previous work and the method described in the other work.

In this paper, a new probe-fed wideband antenna with a circular patch and a coupled stacked ring is proposed. This antenna can be implemented by using suspended microstrip technique with total thickness of about 0.09 of center frequency wavelength. By using a novel feeding technique, in this antenna about 40 % reduction in area compared to similar works can be achieved. The obtained bandwidth in this antenna according to simulation results satisfying VSWR<2 is about 27.5 % from 5 to 6.6 GHz using two resonant frequencies. Also a comprehensive theoretical and parametric study is done in order to facilitate its designing in various frequency bands.

The analysis of microscopy images has always been an important yet time consuming process in in materials science. Convolutional Neural Networks (CNNs) have been very successfully used for a number of tasks, such as image segmentation. However, training a CNN requires a large amount of hand annotated data, which can be a problem for material science data. We present a procedure to generate synthetic data based on ad-hoc parametric data modelling for enhancing generalization of trained neural network models. Especially for situations where it is not possible to gather a lot of data, such an approach is beneficial and may enable to train a neural network reasonably. Furthermore, we show that targeted data generation by adaptively sampling the parameter space of the generative models gives superior results compared to generating random data points.

Image denoising has been one of the important problems in the field of computer vision, and it has a wide range of practical value in many applications, such as medical image processing, image enhancement, and computational photography. Traditional image denoising methods are usually based on hand-designed features and filters, but these methods perform poorly under complex noise and image structures. In recent years, the rapid development of neural network technology has revolutionized the image-denoising task. This paper introduces the knowledge about neural networks and image denoising, explores the impact of neural networks on image denoising, and how is it possible to denoise images by neural networks. It also summarises other image-denoising methods and finally points out the challenges and problems faced by image-denoising at present. Some possible new development directions are proposed to provide new solutions for image-denoising researchers and to promote the development of the field.

Numerous approaches address over-fitting in neural networks: by imposing a penalty on the parameters of the network (L1, L2, etc); by changing the network stochastically (drop-out, Gaussian noise, etc.); or by transforming the input data (batch normalization, etc.). In contrast, we aim to ensure that a minimum amount of supporting evidence is present when fitting the model parameters to the training data. This, at the single neuron level, is equivalent to ensuring that both sides of the separating hyperplane (for a standard artificial neuron) have a minimum number of data points — noting that these points need not belong to the same class for the inner layers. We firstly benchmark the results of this approach on the standard Fashion-MINST dataset, comparing it to various regularization techniques. Interestingly, we note that by nudging each neuron to divide, at least in part, its input data, the resulting networks make use of each neuron, avoiding a hyperplane completely on one side of its input data (which is equivalent to a constant into the next layers). To illustrate this point, we study the prevalence of saturated nodes throughout training, showing that neurons are activated more frequently and earlier in training when using this regularization approach. A direct consequence of the improved neuron activation is that deep networks are now easier to train. This is crucially important when the network topology is not known a priori and fitting often remains stuck in a suboptimal local minima. We demonstrate this property by training a network of increasing depth (and constant width): most regularization approaches will result in increasingly frequent training failures (over different random seeds) whilst the proposed evidence-based regularization significantly outperforms in its ability to train deep networks.

Vibration measurement serves as the basis for various engineering practices such as natural frequency or resonant frequency estimation. As image acquisition devices become cheaper and faster, vibration measurement and frequency estimation through image sequence analysis continue to receive increasing attention. In the conventional photogrammetry and optical methods of frequency measurement, vibration signals are first extracted before implementing the vibration frequency analysis algorithm. In this work, we demonstrated that frequency prediction can be achieved using a single feed-forward convolutional neural network. The proposed method is verified using a vibration signal generator and excitation system, and the result obtained was compared with that of an industrial contact vibrometer in a real application. Our experimental results demonstrate that the proposed method can achieve acceptable prediction accuracy even in unfavorable field conditions.

To describe the hysteresis nonlinearities in smart actuators, numerous models have been presented in the literature, among which the Preisach operator would be the most effective one due to its capability in capturing multi-loop or sophisticated hysteresis curves. When such an operator is coupled with uncertain nonlinear dynamics, especially in noncanonical form, it is a challenging problem to develop techniques to cancel out the hysteresis effects, and at the same time achieve asymptotic tracking performance. To resolve this problem, in this paper, we investigate the problem of iterative inverse-based adaptive control for an uncertain noncanonical nonlinear systems with unknown input Preiasch hysteresis, and a new adaptive version of the closest match algorithm is proposed to compensate for the Preisach hysteresis. With our scheme, the stability and convergence of the closed-loop system can be established. The effectiveness of the proposed control scheme is illustrated by simulation and experiment results.

Environmental monitoring systems play a crucial role in assessing environmental quality, detecting limits exceedances, and predicting potential ecological episodes. These systems rely on the measurement of various variables at specific locations and time intervals over an extended period. The concept of environmental monitoring encompasses the assessment of health and safety issues for public and environmental health purposes. Pollution of the atmosphere and water, climate change, and natural disasters are among the consequences of continuous industrial and municipal development and human interference in natural ecosystems. To address these challenges and to protect human lives and the environment, with a special concern on mitigating the ecological effects of industrial development, advanced technical solutions, including the technologies associated with artificial intelligence (artificial neural networks ANNs, machine learning ML) have been developed. These technologies offer powerful tools for analysing the vast amount of data collected by monitoring systems and extracting valuable insights. By applying ANNs and machine learning algorithms, environmental monitoring systems can effectively process and interpret the measured variables to assess environmental quality. Despite challenges and limitations, such as data quality and interpretability of AI models, ongoing research and interdisciplinary collaboration are paving the way for the successful implementation of AI in environmental monitoring, ultimately supporting informed decision-making and sustainable resource management.While several review papers have explored the theory of artificial intelligence (AI), here I aim to review the application of ANNs and ML, in environmental aspects, specifically in automotive and industrial emissions toxicity measurements, as well as atmospheric pollution prevention. By examining the potential of AI in these domains, the paper contributes to understanding the role of advanced technologies in environmental monitoring and protection.

In South Korea, demolition waste (DW) management has become increasingly significant owing to the rising number of old buildings. Effective DW management requires an efficient approach that accurately quantifies and predicts the generation of DW (DWG) of various types, which necessitates access to the required information or technology capable of achieving this. Hence, we developed an artificial intelligence-based model that predicts the generation of ten DW types, specifically from buildings in redevelopment areas. We used an artificial neural network algorithm with < 10 neurons in the hidden layer to derive individual input variables and optimal hyperparameters for each DW type. All DWG prediction models achieved an average validation and test prediction performance (R²) of 0.970 and 0.952, respectively, with their ratios of percent deviation ≥ 2.5, ver-ifying them as excellent models. Moreover, a Shapley additive explanations analysis revealed that DWG was most impacted by the floor area for all the DW types, with a positive correlation with DWG. Conversely, other factors showed either a positive or negative correlation with DWG de-pending on the DW type. The study findings will enable demolition companies and local gov-ernments in making informed decisions for efficient DW management and resource allocation by accurately predicting the generation of various types of DW.

In urban Vehicular Ad Hoc Network (VANET) environments, buildings play a crucial role as they can act as obstacles that attenuate the transmission signal between vehicles. Quantifying the impact of buildings on the transmission quality is essential, especially in critical scenarios involving emergency vehicles, where reliable communication is of utmost importance. In this research, we propose a supervised learning approach based on artificial neural networks (ANNs) to develop a predictive model capable of estimating the level of signal degradation, represented by the bit error rate (BER), based on the obstacles perceived by moving emergency vehicles. By establishing a relationship between the level of signal degradation and the encountered obstacles, our proposed mechanism enables efficient routing decisions to be made prior to the transmission process. Consequently, data packets are routed through paths that exhibit the lowest BER. To gather the necessary training data, we employed SUMO and NS-3 simulations. The simulation results demonstrate that our developed model successfully learns and accurately estimates the BER for new data instances. Overall, our research contributes to enhancing the performance and reliability of communication in urban VANET environments, especially in critical scenarios involving emergency vehicles, by leveraging supervised learning and artificial neural networks to predict signal degradation levels and optimize routing decisions accordingly.

Several researchers have contemplated deep learning-based post-filters to increase the quality of statistical parametric speech synthesis, which perform a mapping of the synthetic speech to the natural speech, considering the different parameters separately and trying to reduce the gap between them. The Long Short-term Memory (LSTM) Neural Networks have been applied successfully in this purpose, but there are still many aspects to improve in the results and in the process itself. In this paper, we introduce a new pre-training approach for the LSTM, with the objective of enhancing the quality of the synthesized speech, particularly in the spectrum, in a more efficient manner. Our approach begins with an auto-associative training of one LSTM network, which is used as an initialization for the post-filters. We show the advantages of this initialization for the enhancing of the Mel-Frequency Cepstral parameters of synthetic speech. Results show that the initialization succeeds in achieving better results in enhancing the statistical parametric speech spectrum in most cases when compared to the common random initialization approach of the networks.

Introduction: Studies of the socio-economic function of entrepreneurship have emphasized the critical role that entrepreneurial competence and its implementation play at different stages of the education system. In this paper, we seek to determine the entrepreneurial interest of Spanish youth aged between 15 to 18 years of age, who find themselves in the state-regulated education system, at an initial stage in the development of entrepreneurship. A previously validated ad hoc questionnaire was applied through simple random sampling to 1,764 students at a secondary school in Spain. The analysis is done with Artificial Neural Networks (ANN), a technique that reduces the high dimensionality of data through Cooperative Maximum Likelihood Hebbian Learning (CMLHL), applying neurocomputational methods to the educational sciences. Spanish youth expressed a medium level of interest in entrepreneurship. Analysis with ANN shows that education in entrepreneurial competence is an influential aspect of interest in entrepreneurship. As conclusion, educational and curricular reforms must be undertaken to promote the development of entrepreneurial competence at various stages of compulsory education to increase interest in entrepreneurship.

The application of artificial intelligence to point-of-care testing (POCT) disease detection has become a hot research field, in which breath detection which detects the patient's exhaled VOCs combined with sensor arrays of Convolutional Neural Network (CNN) algorithms as a new lung cancer detection is attracting more researchers' attention. However, due to low accuracy, high complexity computation and large number of parameters make the CNN algorithms difficult transplant to the embedded system of POCT devices. A lightweight neural network (LTNet) in this work is proposed to deal with this problem, and meanwhile, achieve high-precision classification of acetone and ethanol gases, which are respiratory markers for lung cancer patients. Compared to currently popular lightweight CNN models such as EfficientNet, LTNet has fewer parameters (32K) and its training weight size is only 0.155 MB. LTNet achieved an overall classification accuracy of 99.06% and 99.14% in the own mixed gas dataset and the University of California (UCI) dataset, which are both higher than that of the five existing models’, and it also offers the shortest training (844.38s and 584.67s) and inference time (23s and 14s) in the same validation set. Compared to the existing CNN models, LTNet is more suitable for resource-limited POCT devices.

Damage assessment is one of the most crucial issues for bridge engineers, especially for existing steel bridges. Among several methodologies, the vibration measurement test is a typical approach in which the natural frequency variation of the structure is monitored to detect the existence of damage. However, locating and quantifying the damage is still a big challenge. In this regard, the artificial intelligence (AI)-based approach seems a potential way to accomplish those obstacles. This study deploys a comprehensive campaign to determine all dynamic parameters of a pre-damage steel truss bridge structure. Based on the results of mode shape, natural frequency, and damping ratio, a finite element model (FEM) is created and keeps updating. The artificial intelligence network's input data will be analyzed and evaluation from damage cases. The trained artificial neural network model will be curated and evaluated to confirm the approach's feasibility. During the actual operational stage of the steel truss bridge, this damage assessment system is showing good performance in terms of monitoring the structural behavior of the bridge under some unexpected accidents.

To protect power lines, distance relays are used which can rely on a modified distance resistance. But usually the operating range of these relays changes as the network conditions change (network topology, load value, output value, etc.) and leads to false trips, By using methods that can process information and recognize patterns, for example, the use of micro and intelligent processor algorithms can use the new relays with high precision and thus provide adequate protection. In this study, a distance relay was modeled using a neural network, and it was observed that the neural relay had higher accuracy than the conventional relay. In addition to detecting the fault and its location, type and phase of the fault, three-stage simultaneous protection can be performed. As a result, the number of linear relays can be reduced by using relays based on neural technologies. An MLP (multilayer perceptron) neural network is used to model a sequence of distances.

The diagnosis of papillary thyroid carcinoma has always been a concerned and challenging issue and it is very important and meaningful to have a definite diagnosis before the operation. In this study, we tried to use an artificial intelligence algorithm instead of medical statistics to analyze the genetic fingerprint from gene chip results to identify papillary thyroid carcinoma. We trained 20 artificial neural network models with differential genes and other important genes related to the cell metabolic cycle as the list of input features, and apply them to the diagnosis of papillary thyroid cancer in the independent validation data set. The results showed that when we used the DEGs and all genes lists as input features the models got the best diagnostic performance with AUC=98.97% and 99.37% and the accuracy were both 96%. This study revealed that the proposed artificial neural network models constructed with genetic fingerprints could achieve a prediction of papillary thyroid carcinoma. Such models can support clinicians to make more accurate clinical diagnoses. At the same time, it provides a novel idea for the application of artificial intelligence in clinical medicine.

In recent years, artificial neural networks (ANNs) have won numerous contests in pattern recognition, machine learning, and artificial intelligence. The basic unit of an ANN is to mimic neurons in the brain. Neuron in ANNs is expressed as f (wx+b) or f (wx). This structure does not consider the information processing capabilities of dendrites. However, recently, studies shown that dendrites participate in pre-calculation in the brain. Concretely, biological dendrites play a role in the pre-processing to the interaction information of input data. Therefore, it is time to perfect the neuron of the neural network. This paper, add dendrite processing section, presents a novel artificial neuron, according to our previous studies (CR-PNN or Gang transform). The dendrite processing section can be expressed as . Because I perfected the basic unit of ANNs— neuron, there are so many networks to try. This article gives the basic architecture for reference in future research.

Deep learning models are part of the family of artificial neural networks and, as such, it suffers of catastrophic interference when they learn sequentially. In addition, most of these models have a rigid architecture which prevents the incremental learning of new classes. To overcome these drawbacks, in this article we propose the Self-Improving Generative Artificial Neural Network (SIGANN), a type of end-to-end Deep Neural Network system which is able to ease the catastrophic forgetting problem when leaning new classes. In this method, we introduce a novelty detection model to automatically detect samples of new classes, moreover an adversarial auto-encoder is used to produce samples of previous classes. This system consists of three main modules: a classifier module implemented using a Deep Convolutional Neural Network, a generator module based on an adversarial autoencoder; and a novelty detection module, implemented using an OpenMax activation function. Using the EMNIST data set, the model was trained incrementally, starting with a small set of classes. The results of the simulation show that SIGANN is able to retain previous knowledge with a gradual forgetfulness for each learning sequence. Moreover, SIGANN can detect new classes that are hidden in the data and, therefore, proceed with incremental class learning.

In the present study, a hybrid optimizing algorithm has been proposed using Genetic Algorithm (GA)and Particle Swarm Optimization (PSO) for Artificial Neural Network (ANN) to improve the estimation of electricity demand of the state of Tamil Nadu in India. The GA-PSO model optimizes the coefficients of factors of gross state domestic product (GSDP) , electricity consumption per capita, income growth rate and consumer price index (CPI) that affect the electricity demand. Based on historical data of 25 years from 1991 till 2015 , the simulation results of GA-PSO models are having greater accuracy and reliability than single optimization methods based on either PSO or GA. The forecasting results of ANN-GA-PSO are better than models based on single optimization such as ANN-BP, ANN-GA, ANN-PSO models. Further the paper also forecasts the electricity demand of Tamil Nadu based on two scenarios. First scenario is the "as-it-is" scenario , the second scenario is based on milestones set for achieving goals of "Vision 2023" document for the state. The present research also explores the causality between the economic growth and electricity demand in case of Tamil Nadu. The research indicates that a direct causality exists between GSDP and the electricity demand of the state.

In the present study, a hybrid optimizing algorithm has been proposed using Genetic Algorithm (GA)and Particle Swarm Optimization (PSO) for Artificial Neural Network (ANN) to improve the estimation of electricity demand of the state of Tamil Nadu in India. The GA-PSO model optimizes the coefficients of factors of gross state domestic product (GSDP) , electricity consumption per capita, income growth rate and consumer price index (CPI) that affect the electricity demand. Based on historical data of 25 years from 1991 till 2015, the simulation results of GA-PSO models are having greater accuracy and reliability than single optimization methods based on either PSO or GA. The forecasting results of ANN-GA-PSO are better than models based on single optimization such as ANN-BP, ANN-GA, ANN-PSO models. Further the paper also forecasts the electricity demand of Tamil Nadu based on two scenarios. First scenario is the “as-it-is” scenario, the second scenario is based on milestones set for achieving goals of “Vision 2023” document for the state. The present research also explores the causality between the economic growth and electricity demand in case of Tamil Nadu. The research indicates that a direct causality exists between GSDP and the electricity demand of the state.

The passenger prediction flow is very significant to transportation sustainability. This is due to some chaos of traffic jams encountered by the road users during their movement to the offices, schools, or markets at earlier of the days and during closing periods. This problem is peculiar to the transportation system of the Federal University of Technology Minna, Nigeria. However, the prevailing technique of passenger flow estimation is non-parametric which depends on the fixed planning and is easily affected by noise. In this research, we proposed the development of a hybrid intelligent passenger frequency prediction model using the Auto-Regressive Integrated Moving Average (ARIMA) linear model, Convolutional Neural Network (CNN), and Kalman Filter Algorithm (KFA). The passengers’ frequency of arrival at the bus terminals is obtained and enumerated through the closed-circuit television (CCTV) and demonstrated using the Markovian Queueing Systems Model (MQSM). The ARIMA model was used for learning and prediction and compared the result with the combined techniques of using CNN-KFA. The autocorrelation coefficient functions (ACF) and partial autocorrelation coefficient functions (PACF) are used to examine the stationary data with different features. The performance of the models was analyzed and evaluated in describing the short-term passenger flow frequency at each terminal using the Mean Absolute Percentage Error (MAPE) and Mean Squared Error (MSE) values. The CNN-Kalman-filter model was fitted into the short-term series and the MAPE values are below 10%. The Mean Square Error (MSE) shows that the CNN-Kalman Filter model has the overall best performance with 83.33% of the time better than the ARIMA model and provides high accuracy in forecasting.

The implementation of neural networks (NN) on edge devices enables local processing of wireless data but faces challenges such as high computational complexity and memory requirements when deep neural networks (DNN) are used. Shallow neural networks customized for specific problems are more efficient, requiring fewer resources, and resulting in a lower latency solution. An additional benefit of the smaller network size is that it is suitable for real-time processing on edge devices. The main concern with shallow neural networks is their accuracy performance compared to DNNs. In this paper, we demonstrate that a customized adaptive activation function (AAF) can meet the accuracy of a DNN. We designed an efficient FPGA implementation for a customized segmented spline curve neural network (SSCNN) structure to replace the traditional fixed activation function with an AAF. We compared our SSCNN with different neural network structures such as real-valued time delay neural network (RVTDNN), augmented real-valued time delay neural network (ARVTDNN), and deep neural networks with different parameters. Our proposed SSCNN implementation uses 40% fewer hardware resources and no Block RAMS compared to the DNN with similar accuracy. We experimentally validate this computationally efficient and memory-saving FPGA implementation of SSCNN for digital predistortion of RF power amplifiers using the AMD/Xilinx RFSoC ZCU111. The implemented solution uses less than 3% of the available resources. The solution also enables an increase of the clock frequency to 221.12 MHz, allowing the transmission of wide bandwidth signals.

Scouring is the most common cause of bridge failure. This study was conducted to evaluate the efficiency of the Artificial Neural Networks (ANN) in determining scour depth around composite bridge piers. The experimental data, attained in different conditions and various pile cap locations, were used to obtain the ANN model and to compare the results of the model with most well-known empirical, HEC-18 and FDOT, methods. The data were divided into training and evaluation sets. The ANN models were trained using the experimental data, and their efficiency was evaluated using statistical test. The results showed that to estimate scour at the composite piers, feedforward propagation network with three neurons in the hidden layer and hyperbolic sigmoid tangent transfer function was with the highest accuracy. The results also indicated a better estimation of the scour depth by the proposed ANN than the empirical methods.

Pulsed electric fields of specific frequencies emitted by a glass plasma antenna tube have been shown to slow the growth of Acute Lymphoblastic Leukemia cells by as much as 43% when exposed to a series of frequencies between 156kHz and 162kHz. This narrow band of frequencies is termed a “Destructive Cancer Resonant Frequency Formant” (DCRFF).

Foam concrete is a construction material with controllable low strength and untraditional physical properties. Its highly crushable nature leaves it a niche as an engineered energy-absorbing material in many value-added applications; however, fundamental understanding of the material properties is crucial. As foam concrete is highly cellularized and ductile, conventional concrete testing methods such as compression test are insufficient to characterize the key material attributes of foam concrete, especially when the foam density is low. The resonant frequency test (ASTM C215) is specified for evaluating dynamic Young’s modulus of normal concrete. Inspired by the non-destructive feature of this test, we investigate the possibility of using the resonant frequency test to continuously monitor the modulus build-up of foam concrete with age. For the representativeness of the samples, three variables are considered in material design—bulk density ranging from 0.4 to 1.2 g/cm3, water to cementitious materials ratio of 0.42 and 0.47, and fly ash replacement of 10 and 30% by weight of cement. After examining the different vibration modes, the fundamental transverse frequency is determined most suitable for interpreting the foam modulus. The experimental results demonstrate good accuracy of using this approach for the measurement of different samples. It is also confirmed that, for a given foam concrete, the foam modulus can be predicted by knowing the foam density and solid modulus of its base cement paste, which provides an important insight for the further studies and real applications of foam concrete.

The influence of neutrosophy in the previous period is constantly growing in many areas of science and technology. Moreover, various applications of the neutrosophic approach have become more common in recent years. Our goal in this research is to utilize the neutrosophy to improve the performance of the Dai-Liao conjugate gradient (CG) method. Specifically, in this research, we propose and investigate a new neutrosophic logic system to calculate the key parameter t involved in the Dai–Liao CG iterations. Theoretical analysis and numerical experience indicate that the efficiency and robustness of the new rule for determining t. Combining the neutrosophy and the Dai-Liao conjugate gradient method, we propose and explore a new Dai-Liao CG iterations for solving large-scale unconstrained optimization models. The global convergence is established under common assumptions and the backtracking line search. Finally, by conducting numerical experiments, computational evidence demonstrates that the new fuzzy neutrosophic Dai-Liao conjugate gradient method is computationally effective and robust.

This article presents a unique set of voltage and current data from a public building and acquired using a hybrid measurement solution that combines Python and Grafana. The transversal purpose consists of contributing to the community with a vision of the quality of the supply more oriented to the monitoring of the state of the network, providing a more realistic vision, which allows a better understanding, and the adoption of the best decisions to achieve the efficient energy management and thus optimize the operation and maintenance of power systems. The work focuses on higher order statistical estimators that, combined with exploratory data analysis techniques, improve the characterization of the shape of the stress signal. These techniques and data, together with the acquisition and monitoring system, present a unique combination in the line of low-cost measurement solutions. It also incorporates the underlying benefit of the contribution to industrial benchmarking. The paper also includes a computational comparison between Python and LabVIEW to elicit the performance of the measurement solution.

System-of-systems (SoS) evolution is a complex and unpredictable process. Although various principles to facilitate collaborative SoS evolution have been proposed, there is a lack of experimental data validating their effectiveness. To address these issues, we present an Agent-Based Model (ABM) for SoS evolution in the Internet of Vehicles (IoV) , serving as a quantitative analysis tool for SoS research. By integrating multiple complex and rational behaviors of individuals, we aim to simulate real-world scenarios as accurately as possible. To simulate the SoS evolution process, our model employs multiple agents with autonomous interactions and incorporates external environmental variables. Furthermore, we propose three evaluation metrics: evolutionary time, degree of variation, and evolutionary cost, to assess the performance of SoS evolution. Our study demonstrates that enhanced information transparency significantly improves the evolutionary performance of distributed SoS. Conversely, the adoption of uniform standards only brings limited performance enhancement to distributed SoSs. Although our proposed model has limitations, it stands out from other approaches that utilize Agent-Based Modeling to analyze SoS theories. Our model focuses on realistic problem contexts and simulates realistic interaction behaviors. This study enhances the comprehension of SoS evolution processes and provides valuable insights for the formulation of effective evolutionary strategies.

In this article, the evolution in space and in time of the coronavirus pandemic is studied by utilizing a neural network with a self-organizing nature for the spatial analysis of data, and a fuzzy fractal method for capturing the temporal trends of the time series of the countries. Self-organizing neural networks possess the capability for clustering countries in the space domain based on their similar characteristics with respect to their coronavirus cases. In this form enabling finding the countries that are having similar behavior and thus can benefit from utilizing the same methods in fighting the virus propagation. To validate the approach, publicly available datasets of coronavirus cases worldwide have been used. In addition, a fuzzy fractal approach is utilized for the temporal analysis of time series of the countries. Then, a hybrid combination of both the self-organizing maps and the fuzzy fractal approach is proposed for efficient COVID-19 forecasting of the countries. Relevant conclusions have emerged from this study, that may be of great help in putting forward the best possible strategies in fighting the virus pandemic. A lot of the existing works concerned with the Coronavirus have look at the problem mostly from the temporal viewpoint that is of course relevant, but we strongly believe that the combination of both aspects of the problem is relevant to improve the forecasting ability. The most relevant contribution of this article is the proposal of combining neural networks with a self-organizing nature for clustering countries with high similarity and the fuzzy fractal approach for being able to forecast the times series and help in planning control actions for the Coronavirus pandemic.

Human and Computer interaction has been a part of our day-to-day life. Speech is one of the essential and comfortable ways of interacting through devices as well as a human being. The device, particularly smartphones have multiple sensors in camera and microphone, etc. speech recognition is the process of converting the acoustic signal to a smartphone as a set of words. The efficient performance of the speech recognition system highly enhances the interaction between humans and machines by making the latter more receptive to user needs. The recognized words can be applied for many applications such as Commands & Control, Data entry, and Document preparation. This research paper highlights speech recognition through ANN (Artificial Neural Network). Also, a hybrid model is proposed for audio-visual speech recognition of the Tamil and Malay language through SOM (Self-organizing map0 and MLP (Multilayer Perceptron). The Effectiveness of the different models of NN (Neural Network) utilized in speech recognition will be examined.

Recognition of the human interaction on the unconstrained videos taken from cameras and remote sensing platforms like a drone is a challenging problem. This study presents a method to resolve issues of motion blur, poor quality of videos, occlusions, the difference in body structure or size, and high computation or memory requirement. This study contributes to the improvement of recognition of human interaction during disasters such as an earthquake and flood utilizing drone videos for rescue and emergency management. We used Support Vector Machine (SVM) to classify the high-level and stationary features obtained from Convolutional Neural Network (CNN) in key-frames from videos. We extracted conceptual features by employing CNN to recognize objects from first and last images from a video. The proposed method demonstrated the context of a scene, which is significant in determining the behaviour of human in the videos. In this method, we do not require person detection, tracking, and many instances of images. The proposed method was tested for the University of Central Florida (UCF Sports Action), Olympic Sports videos. These videos were taken from the ground platform. Besides, camera drone video was captured from Southwest Jiaotong University (SWJTU) Sports Centre and incorporated to test the developed method in this study. This study accomplished an acceptable performance with an accuracy of 90.42%, which has indicated improvement of more than 4.92% as compared to the existing methods.

Social networks have captured the attention of many people worldwide. However, these services have also attracted a considerable number of malicious users whose purpose is to compromise digital assets of other members by using messages as an attack vector to execute different variants of cyberattacks against them. Therefore, this work presents an approach based on Natural Language Processing tools and a Convolutional Neural Network architecture to detect and classify, on social network messages, four types of cyberattacks, such as malware, phishing, spam, and even one whose purpose is deceiving the user into spreading malicious messages to other users, which in this work is identified as bot attacks. One notable feature of this work is that it analyzes textual content without depending on any characteristics from a specific social network, making its analysis independent from particular data sources. Finally, this work was tested on real data, demonstrating its results in two stages. The first detects the existence of any of the four cyberattacks within the message, obtaining an accuracy value of 0.91. After detecting a message as a cyberattack, the next stage is to classify it into one of the four types of cyberattack, achieving an accuracy value of 0.82.

Convolutional neural networks (CNN) have attracted much attention as a commonly used method for hyperspectral image (HSI) classification in recent years, however, CNNs can only be applied to Euclidean data and have limitations in dealing with relationships due to the limitations of local feature extraction. However, each pixel of a hyperspectral image contains a set of spectral bands that are correlated and interact with each other, and the methods used to process Euclidean data cannot effectively obtain these correlations. In contrast, the graph convolutional network (GCN) can be used in non-Euclidean data, but usually leads to oversmoothing and ignoring local detail features due to the need for superpixel segmentation processing to reduce computational effort. To overcome the above problems, we constructed a network a fusion network based on GCN and CNN, which contains two branches: a graph convolutional network based on superpixel segmentation and a convolutional network with added attention mechanism. The graph convolu-tional branch can extract the structural features and capture the relationships between the nodes, and the convolutional branch can extract the detailed features in the local fine region. Owing to the fact that the features extracted from the two branches are different, the classification performance can be improved by fusing the complementary features extracted from the two branches. To vali-date the proposed algorithm, experiments were conducted on three widely used datasets, namely Indian Pines, Pavia University, and Salinas, and the overall accuracy of 98.78% was obtained in the Indian Pines dataset, and the overall accuracy of 98.99% and 98.69% was obtained in the other two datasets. The results showed that the proposed fusion network can obtain richer features and achieve high classification accuracy.

The total tree height (h) and diameter at breast height (dbh) relationship is an essential tool in forest management and planning. The height—diameter (h-dbh) relationship had been studied with several approaches and for several species worldwide. The nonlinear mixed effect modeling (NLMEM) has been extensively used and lately the resilient backpropagation artificial neural network (RBPANN) approach has been a trend topic for modeling this relationship. The artificial neural network (ANN) is a computing system based in artificial intelligence and inspired in biological neural network for supervised learning. In this study the NLMEN and RBPANN approaches were used for modeling the h—dbh relationship for Durango pine species (Pinus durangensis Martínez) in mixed-species forest from Mexico. The total dataset considered 1,000 (11,472 measured trees) randomly selected from 14,390 temporary forest inventory plots and the dataset was randomly divided into two parts; 50% for training and 50% for testing. An unsupervised clustering analysis was used to grouped the dataset into 10 clusters based on k-means clustering method and plot-variables like density, basal area, mean dbh, mean h, quadratic mean diameter, altitude and aspect. The RBPANN was performed for tangent hyperbolicus (RBPANN-tanh), softplus (RBPANN-softplus), and logistic (RBPANN-logistic) activation functions for functions in cross product of the covariate or neurons and the weights for the ANN analysis. For both training and testing, 10 classical statistics (e.g., RMSE, R2, AIC, BIC, logLik) were computed for the residual values and assess the approaches for h—dbh relationship. For training and testing, the ANNs approach outperformed the NLMEM approach, and the RBPANN-tanh has the best performance in both training and testing phases.

Computer network attacks are evolving in parallel with the evolution of hardware and neural network architecture. Despite major advancements in Network Intrusion Detection System (NIDS) technology, most implementations still depend on signature-based intrusion detection systems, which can’t identify unknown attacks. Deep learning can help NIDS to detect novel threats since it has a strong generalization ability. The deep neural network’s architecture has a significant impact on the model’s results. We propose a genetic algorithm based model to find the optimal number of hidden layers and the number of neurons in each layer of the deep neural network (DNN) architecture for the network intrusion detection binary classification problem. Experimental results demonstrate that the proposed DNN architecture shows better performance than classical machine learning algorithms at a lower computational cost.