Let $\mathcal{N}$ be an arbitrary class of matroids, closed under isomorphism. For $k$ a positive integer, we say that $M \in \mathcal{N}$ is \emph{$k$-minor-irreducible} if $M$ has no minor $N \in \mathcal{N}$ such that $1\leq\left|E\left(M\right)\right|-\left|E\left(N\right)\right|\leq k $. Tutte's Wheels and Whirls Theorem establish that, up to isomorphism, there are only two families of 1-minor-irreducible matroids in the class of 3-connected matroids. More recently, Lemos classified the 3-minor-irreducibles with at least 14 elements in the class of triangle-free 3-connected matroids. Here we prove a local characterization for the 2-minor-irreducible matroids with at least 11 elements in the class of triangle-free 3-connected matroids. This local characterization is used to establish two new families of 2-minor-irreducible matroids in this class.

Recently, the Third Generation Partnership Project (3GPP) introduced the New Radio (NR) technology for Vehicle-to-everything (V2X) communication to enable delay-sensitive and bandwidth-hungry applications in vehicular communication. The NR system is strategically crafted to complement the existing Long Term Evolution (LTE) Cellular-Vehicle-to-Everything (C-V2X) infrastructure, particularly to support advanced services such as the operation of automated vehicles. It is widely anticipated that the 5th generation (5G) NR system will surpass LTE C-V2X in terms of achieving superior performance in scenarios characterized by high throughput, low latency, and enhanced reliability, especially in the context of congested traffic conditions and a diverse range of vehicular applications. This article will provide a comprehensive literature review on vehicular communications from Dedicated Short Range Communication (DSRC) to NR V2X. Subsequently, it delves into a detailed examination of the challenges and opportunities inherent in NR V2X technology. Finally, we proceed to elucidate the process of creating and analyzing an open-source 5G NR V2X module in network simulation-3 (ns-3) and then demonstrate the NR V2X performance in terms of different key performance indicators implemented through diverse operational scenarios.

The connected vertex cover (CVC) problem is a variant of the vertex cover problem, which has many important applications, such as wireless network design, routing and wavelength assignment problem, etc. A good algorithm for the problem can help us improve engineering efficiency, cost savings and resources in industrial applications. In this work, we present an efficient algorithm GRASP-CVC (Greedy Randomized Adaptive Search Procedure for Connected Vertex Cover) for CVC in general graphs. The algorithm has two main phases, i.e., construction phase and local search phase. To construct a high quality feasible initial solution, we design a greedy function and a restricted candidate list in the construction phase. The configuration checking strategy is adopted to decrease the cycling problem in the local search phase. The experimental results demonstrate that GRASP-CVC is competitive with the other competitive algorithm, which validate the effectivity and efficiency of our GRASP-CVC solver.

With the rapid development of communication technology, connected vehicles (CV) have the potential, through the sharing of data, to enhance vehicle safety and reduce vehicle energy consumption and emissions. Numerous research efforts have been conducted to quantify the impacts of CV applications, assuming instant and accurate communication among vehicles, devices, pedestrians, infrastructure, the network, the cloud, and the grid, collectively known as V2X (vehicle-to-everything). The use of cellular vehicle-to-everything (C-V2X), to share data is emerging as an efficient means to achieve this objective. C-V2X releases 14 and 15 utilize the 4G LTE technology and release 16 utilizes the new 5G new radio (NR) technology. C-V2X can function without network infrastructure coverage and has a better communication range, improved latency, and greater data rates compared to older technologies. Such highly efficient interchange of information among all participating parts in a CV environment will not only provide timely data to enhance the capacity of the transportation system but can also be used to develop applications that enhance vehicle safety and minimize negative environmental impacts. However, before the full benefits of CV can be achieved, there is a need to thoroughly investigate the effectiveness, strengths, and weaknesses of different CV applications, the communication protocols, the varied results with different CV market penetration rates (MPRs), the interaction of CVs and human driven vehicles, the integration of multiple applications, and the errors and latencies associated with data communication. This paper reviews existing literature on the environmental, mobility and safety impacts of CV applications, identifies the gaps in our current research of CVs and recommends future research directions. The results of this paper will help shape the future research direction for CV applications to realize their full potential benefits.

Radial basis function (RBF) networks are often viewed as instable when used in multi-layered architectures and therefore are mostly used in a single-layered manner. Universal approximation theorems for single-layered RBF networks further render deeper architectures useless. However, deep neural networks have proven their effectiveness on many different tasks. We show that deeper RBF architectures with multiple radial basis function layers are achievable and able to learn. We introduce an initialization scheme for deep RBF networks based on k-means clustering and covariance estimation. We further show how to make use of convolutions to speed up the calculation of a Mahalanobis distance in a partially-connected fashion, similar to convolutional neural networks (CNNs). Finally, we evaluate our approach on image classification as well as speech emotion recognition tasks. Our results show that deep RBF networks perform similar to simple CNNs.

The condition of surface transportation infrastructure directly affects the economic health of a nation. However, it is difficult to justify the large sums of money needed to extend current methods to monitor all the multimodal infrastructure. The convergence of connected vehicle and cloud computing technologies presents an opportunity to automate the collection of ride quality and imagery data to continuously assess the condition of all roadways and railways. This paper presents several perspectives to help policy and standardization initiatives promote adoption.

A typical river-connected lake, Jinshan Lake, was selected as the study area. By the combination of field experiment, laboratory experiment and mathematical model, we plotted the relationship between the concentration of DCu-SCu and FDI, and constructed the mathematical model of the migration and transformation of HMCu in Jinshan Lake. We choose a typical diurnal tide to simulate and revealed the vertical migration characteristics of HMCu in Jinshan Lake during a diurnal tide. The results show that: (1) The release rate of DCu was proportional to FDI and background content, respectively. (2) Due to the nearby industrial enterprises and terrain characteristics, SA loads the most HMCu, the average concentration is 70.07mg/kg. According to the characteristics and geographical location of LC, the concentration of copper in the two states fluctuates greatly (DCu: 43.20~74.77 mg/kg, SCu: 53.63~74.67mg/kg). The fluctuation trend of SCu in ZA is significantly different from that in other areas, which mainly due to the complex hydraulic distribution and the sorption-desorption process of HMs in sediment particles. The hydraulic disturbance of JG is the least and relatively stable, which is the farthest from the inlet of the lake and is the least affected by the Yangtze river. (3) The FDI in a diurnal tide reaches the suspension condition of fine sediment particles in each region. FDI and sediment concentration on the vertical exchange of two - state Cu is significant.

Different methodologies are being used to study the effects of autonomous vehicle (AV) in the mixed traffic indicating the interaction among autonomous and human-driven vehicles. Micro-scopic simulation tools are popular in such assessment as it offers scope to experiment in eco-nomical, robust, and optimistic way. Lack of reliable real-world data to calibrate and evaluate the connected autonomous vehicles (CAV) simulation model is a major challenge. One interesting methodology could be dealing the CAVs as conventional human driven vehicles and predict its possible characteristics based on the simulation inputs. The conventional human driven vehicles from real world, in this methodology, come to aid as benchmark to offer the measure of effective-ness (MoE) for the calibration and validation. For the three most common driving modules, a sensitivity analysis of the driving behaviors of AVs and an effect assessment of CAVs in a mixed traffic environment were done to explore the human alike autonomous technology. The findings show that, up to a point, which is directly re-lated to the quantity of interacting vehicles, the impact of CAVs is typically favorable. This study validates the approach and supports past studies by showing that CAVs perform better in traffic than AVs for traffic performance and safety aspects. On top of that, the sensitivity analysis has shown that enhancements in technology are required for obtaining the maximum advantages.

Plants are such important keys of biological part of our environment, supply the human life and creatures. Understanding how the plant’s functions react with our surroundings, helps us better to make plant growth and development of food products. It means the plant phenotyping gives us bio information which needs some tools to reach the plant knowledge. Imaging tools is one of the phenotyping solutions which consists of imaging hardware such as the camera and image analysis software analyses the plant images changings such as plant growth rates. In this paper, we proposed a preprocessing algorithm to eliminate the noise and separate foreground from the background which results the plant image to help the plant image segmentation. The preprocessing is one of important levels has effect on better image segmentation and finally better plant’s image labeling and analysis. Our proposed algorithm is focused on removing noise such as converting the color space, applying the filters and local adaptive binarization step such as Niblack. Finally, we evaluate our algorithm with other algorithms by testing a variety of binarization methods.

Many studies in the field of robot navigation have focused on environment representation and localization. The goal of map representation is to summarize spatial information in topological and geometrical abstracts. By providing strong priors, maps improve the performance and reliability of automated robots. Due to the transition to fully automated driving in recent years, there has been a constant effort to design methods and technologies to improve the precision of road participants and the environment's information. Among these efforts is the High Definition (HD) Map concept. Making HD maps requires accuracy, completeness, verifiability, and extensibility. Because of the complexity of HD mapping, it is currently expensive and difficult to implement, particularly in an urban environment. In an urban traffic system, the road model is at least a map with sets of roads, lanes, and lane markers. While more research is being dedicated to mapping and localization, a comprehensive review of the various types of map representation is still required. This paper presents a brief overview of map representation, followed by a detailed literature review of HD Map for automated vehicles. The current state of AV mapping is encouraging, the field has matured to a point where detailed maps of complex environments are built in real-time and have been proved useful. Many existing techniques are robust to noise and can cope with a large range of environments. Nevertheless, there are still open problems for future research. AV mapping will continue to be a highly active research area essential to the goal of achieving full autonomy.

This paper presents preliminary operational performance results of a pilot grid-connected photovoltaic (PV) system designed and installed on the rooftop of the Ministry of Petroleum, Energy and Mining headquarter in Nouakchott (latitude of 18.1°N and the longitude of 16.0°W), Mauritania. The aim is for the government to demonstrate the relevance of using solar energy and to encourage the uptake of solar PV technology for commercial and residential building applications in Mauritania.. In this study, the grid-connected PV system has a peak power of 48 kW and the performance monitoring was carried out during one year, with a system that allow to measure DC power, inverter and system conversion efficiency, energy generated by the PV arrays, solar radiation in the inclination plane of panels, ambient temperature and module temperature. During this period, the PV plant was found to supply 65,668 kWh to the grid. The final yield ranged from 3.91 to 5.09 kWh/kWp/day. The performance ratio was found to vary from 69.69% to 89.35% and the annual capacity factor was found to be 19%. Finally, performance parameters were compared with other PV plants installed in the same region of Northern Africa. The outcome of this work is deemed important in assisting accurate PV system design and decision-making.

The energy efficient problem of parallel-connected pumps in heating, ventilation, and air-conditioning (HVAC) systems has received an increasing attention in recent years. While many pump optimization methods are proposed and show great performance, pumps are not always energy efficient and lack flexibility. In this paper, we propose a distributed control algorithm for parallel pumps in HVAC system in a peer-to-peer setting. Based on a spanning tree of the network of the intelligent nodes and a population of potential solutions randomly sampled, the algorithm makes optimal control decision for pumps to minimize energy consumption and meet the system demand. The theoretical analysis on convergence of the algorithm is established. Unlike traditional control structure, the whole system is fully distributed and each pump is controlled by an intelligent node that runs identical control code and coordinates with other nodes through direct data exchange. Simulation experiments on 6 parallel-connected pumps are provided for different working cases to demonstrate the effectiveness of the proposed algorithm and compare with other four methods. The results show that our method strictly satisfies the demand constraint and presents a good energy saving potential, the convergence guarantee, the flexibility. The maximum energy saving can be up to 29.92%. Besides, the hardware test clearly presents that our method can perform on low-cost Raspberry Pi3 and reduce system cost.

The differential gear train and speed regulating motor constitute the variable ratio transmission for grid-connected wind turbine with differential speed regulation. The synchronous generator in the system can accessing the power grid without frequency converter. The transmission can realize the mode of variable speed constant frequency that the wind rotor speed is varying and the generator rotor speed is constant. The power control method is studied under the different wind speed which is lower or higher than rated wind speed with using the relational expression of utilization rate of wind energy Cp, pitch angle β and the tip speed ratio λ. The SIMULINK software is used to build the 1500 kW wind turbine model with differential speed regulation. Some different wind speed is made as input. The feasibility of power control method for grid-connected wind turbine with differential speed regulation is verified by the comparison between the simulation results and the theoretical value of the key parameters.

Background: Most sepsis patients died during their first episode and the long-term survival post discharge was low. Major adverse cardiovascular events and repeated infections were regarded as the major causes in such conditions. No definite medications were proven to effectively improve the long-term outcome. We aimed to examine the benefit of statins on the long-term outcome of survived sepsis patients. Methods: Between 1999 and 2013, a total of 220,082 patients with the first episode of sepsis hospitalization were included and 134,448 ones (61.09%) survived to discharge. The survived patients who subsequently had statins use of >30 cumulative defined daily doses (cDDDs) post discharge were defined as the statin users. After propensity score matching of 1:5, a total of 7,356 and 36,780 survived patients were retrieved as the study (statin-users) and comparison cohort (non-statin users), respectively. The main outcome was the long term survival post discharge. HR with 95% CI was calculated using the Cox regression model to evaluate the effectiveness of statins with further stratification analyses according to cDDDs. Results: The study cohort, that is, the statin users had an adjusted HR of 0.29 (95% CI, 0.27-0.31) in long term mortality rate compared with the comparison cohort. For statin users with the cDDDs of 30–180, 180–365, and >365, the adjusted HRs were 0.32, 0.22, and 0.16, respectively, (95% CI, 0.30-0.34, 0.19-0.26, and 0.12-0.23, respectively) compared with the non-statin users (defined as statins use <30 cDDDs post discharge), and the P for trend <.0001. In the sensitivity analysis, after excluding the survived patients who died within three and six months post discharge, the adjusted HR of statins use remained significant (0.35, 95% CI 0.32-0.37 and 0.42, 95% CI 0.39-0.45, respectively). Conclusions: Statins decreased the long-term mortality post sepsis. Further randomized control trial deserved to be conducted to confirm this observation.

Illegal removal of road barricades without the notice of road emergency officials and road users has resulted in fatalities, injuries, and property damages. It is only after an incident has occurred or someone noticed the removal and alerted the authorities for the barricade to be placed back at its intended location. There is a need for traditional barricades to be equipped with mechanisms that would alert officials on illegal road barricade removal and warn road users of a road/lane(s) closure to prevent fatalities, injuries, and property damages to the traveling public. This research has used the Global Positioning System (GPS) module to implement the detection of barricade displacement and an alerting system for emergency officials and road users. The barricade displacement was estimated from the haversine distance formula, corrected for errors, and interfaced with the displacement threshold value for the road users within a geofenced area to be alerted. The geofenced area radius was estimated to be 1.04 miles from the barricade location using AASHTO, NSC, and TransGuide ITS manuals. The non-parametric bootstrapping method estimated the GPS position error to 10.5 feet and corrected the measured distances. Data from a clear sunny day shows the best response to barricade movements compared to a cloudy day where movements can’t be explained easily. The proposed monitoring and warning systems would warn road users and alert emergency officials of the danger when the physical barricades have been removed illegally hence saving lives and reducing property damages.

Background: Biological processes are based on complex networks of cells and molecules. Single cell multi-OMICs is a new tool aiming to provide new incites in the complex network of events controlling the functionality of the cell.; Methods: Since single cell technologies provide many sample measurements, they are the ideal environment for the application of deep learning and machine learning approaches. An autoencoder (AE) is composed of an encoder and a decoder sub-model. AE are very powerful in data compression and noise removal. However, the decoder model remains a black box from which is impossible to depict the contribution of the single input elements. We have recently developed a new class of autoencoders, called Sparsely Connected Autoencoders (SCA), which have the advantage of providing a controlled association among the input layer and the decoder module. This new architecture has the benefit that the decoder model is no anymore a black box and it can be used to depict new biologically interesting features from single cell data; Results: In this paper, we show that SCA hidden layer can grab new information usually hidden in single cell data, like as providing clustering on meta-features difficult, i.e. transcription factors expression, or impossible, miRNA expression, to depict in single cell RNAseq data. Furthermore, a SCA representation of cell clusters has the advantage of simulating a conventional bulk RNAseq, which is a data transformation allowing the identification of similarity among independent experiments; Conclusions: In our opinion, SCA represent the bioinformatics version of a “Swiss Army knife” for the extraction of hidden knowledgeable features from single cell OMICs data.

The transportation system has evolved into a complex cyber-physical system with the introduction of wireless communication and the emergence of connected travelers and connected automated vehicles. Such applications create an urgent need to develop high-fidelity transportation modeling tools that capture the mutual interaction of the communication and transportation systems. This paper addresses this need by developing a high-fidelity, large-scale dynamic and integrated traffic and direct cellullar vehicle-to-vehicle and vehicle-to-infrastructure (collectively known as V2X) modeling tool. The unique contributions of this work are (1) we developed a scalable analytical communication model that captures packet movement at the millisecond level; (2) we coupled the communication and traffic simulation models in real-time to develop a fully integrated dynamic connected vehicle modeling tool; and (3) we developed scalable approaches that adjust the frequency of model coupling depending on the number of concurrent vehicles in the network. The proposed scalable modeling framework is demonstrated by running on the Los Angeles downtown network considering the morning peak hour traffic demand (145,000 vehicles), running faster than real-time on a regular personal computer (1.5 hours to run 1.86 hours of simulation time). Spatiotemporal estimates of packet delivery ratios for downtown Los Angeles are presented. This novel modeling framework provides a breakthrough in the development of urgently needed tools for large-scale testing of Direct C-V2X enabled applications.

Background: The evolution of names, from “medical informatics” to “connected health”, implies that the evolvement of technology in health care has been shifted from technology-oriented to healthcare-oriented implementation. Connected healthcare, a healthcare platform of remote monitoring and self-management through technological measures, is suggested to contribute to the efficiency, cost effectiveness, and satisfaction of healthcare recipient enhancement. However, limited understanding of related connected health (CH) terminology may constrain its implementation. Whether CH is a Buzzword only or a practice that can contribute to an ageing society is controversial. Objective: This study aims to distinguish CH-related terminology and to identify the trend of CH through reviewing its definition, initiation, development, and evolvement, in order to offer management insights and implications. The objective is to understand what is connected and who is cared about in the connected health model, so that better applications can be addressed for the benefit of society. Method: This study reviews the evolution of names, from “medical informatics” in the 1970s to “connected health” after 2000, as well as relevant literature of CH, including e-health, telemedicine, telehealth, telecare, and m-health, to discover the trend of technology-related healthcare implementation. The current status and issues facing CH will be presented and its future trends will be explored through reviewing how changes in healthcare are managed, in addition to its operation and practice. Issues of accessibility, quality, and cost will be discussed, as well as its market status. Results: Preconditions and requirements for implementing CH are identified to select a typical case to study. Areas with a complete business ecosystem, including advanced technology and medical services, a payment system, an ageing population, geographic isolation, integrated health, and social care, are prevalent. These findings may be beneficial to designing and establishing comprehensive CH implantation and environments. Conclusion: The evidence and tendency of technological convergence create a demand for innovation and partnering with start-up companies that offer a competitive advantage in innovation. Specifically, it is necessary to innovate both the public and private operation model of the CH ecosystem. This focus will be further explored in future work.

The enhancement of Fusarium head blight (FHB) resistance is one of the best options to reduce mycotoxin contamination in wheat. This study has aimed to verify that the genotypes with high tolerance to deoxynivalenol could guarantee an overall minimization of the sanitary risk, by evaluating the contamination of regulated, modified and emerging mycotoxins on durum wheat cvs with different degrees of FHB susceptibility, grown under different meteorological condi-tions, in 8 growing seasons in North-West Italy. The years which were characterized by frequent and heavy rainfall in spring, were also those with the highest contamination of deoxynivalenol, zearalenone, moniliformin and enniatins. The most FHB resistant genotypes resulted in the lowest contamination of all the mycotoxins but showed the highest deoxyniva-lenol-3-glucoside/deoxynivalenol ratio and moniliformin/deoxynivalenol ratio. An inverse re-lationship between the amount of deoxynivalenol and the deoxyniva-lenol-3-glucoside/deoxynivalenol ratio was recorded for all the cvs and all the years. Converse-ly, the enniatins/deoxynivalenol ratio had a less intense relationship with cv tolerance to FHB. In conclusion, even though the more tolerant cvs, showed higher relative relationships between modified/emerging mycotoxins and native/target mycotoxins than the susceptible ones, they showed lower absolute levels of contamination of both emerging and modified mycotoxins.

Adaptive Cruise Control (ACC) is useful in the most dangerous maneuvers such as braking and acceleration. This study assesses how ACC modifies traffic flows by analysing the differences be-tween manual and autonomous driving in connected and autonomous vehicles (CAVs). Using a platoon of 80 vehicles, tested in pairs on the road, it was possible to define the speed trends during braking and acceleration and the reaction times to the driving maneuvers (PRT, TH, TCC) with a kinematic data detector. The interactions between the CAV and the driver, have been studied in-novatively, i.e through gaze analysis. Situations of potential danger, characterized by the braking of the vehicle that precedes the car with the driver equipped with the eye tracker tool, have been recreated, considering the influence of the driver’s ACC experience. Results statistically confirmed that with the ACC switched on the reaction times are greater than manual driving (2.4/3.8 sec); this can lead to a reduction in road safety, further motivated by the rapid decrease in speed. The interpolation between automated and human data, finally, has allowed the detection of some criticalities of the system that are fundamental in order to reach the second level of automation.

The Third Generation Partnership Project(3GPP) has specified the Cellular Vehicle-to-Everything (C-V2X) radio access technology in Releases 14 and 15, with a focus on facilitating direct communication between vehicles through the sidelink PC5 interface. This interface offers a robust cloud-native core network with end-to-end network slicing functionality. The performance of di-rect vehicle-to-vehicle (V2V) communications has been improved by using the sidelink interface, which allows for network infrastructure by-pass. Sidelink transmissions make use of orthogonal resources that are either centrally allocated (Mode 1) or chosen by the vehicles themselves (Mode 2). The development of radio access technologies that enable dependable and low-latency vehicular communications has become of utmost relevance with the rise in interest in connected and autonomous vehicles. This is especially necessary when there are heavy traffic conditions and patterns. We thoroughly examined the New Radio (NR) sidelink’s performance under various vehicle densities, speeds, and distance settings. Thus, by evaluating sidelink’s strengths and drawbacks, we are able to optimize resource allocation to obtain maximum coverage in urban areas. The performance evaluation is conducted on Network Simulator 3 (NS3.34/5G-LENA) utilizing various network metrics such as average packet reception rate, throughput, and latency.

Microgrid is one of the important ways to accommodate distributed PV generation. However, the optimal planning scheme of microgrids is closely related to solar resources, load characteristics, and the key components of microgrid systems. This paper uses HOMER software to conduct collaborative planning for grid-connected PV-storage microgrids with electric vehicles in multiple scenarios. Specifically, we construct a multi-scenario capacity optimization model for PV generation, energy storage, and converters, considering both the cleanliness and economic performance of microgrids. The performance is quantified using indices such as net present cost, levelized cost of electricity, and carbon dioxide emission under multiple scenarios. Finally, we conduct extensive case studies on a business park in Wuhan, China, to compare and discuss the planning performance under multiple scenarios, as well as sensitivity analysis with specific cases.

This paper presents an improved droop control strategy for grid-connected inverter power stability and power quality under distorted with consideration of grid fluctuation and inter-harmonics. An instantaneous frequency without PLL and amplitude of capacitor voltage feed-forward control strategy is given to power stability control, meanwhile a grid current feedback control is given by an incomplete derivation with a high-pass filter, so that the harmonics and inter-harmonics current can be suppressed. These approaches can provide both good active and reactive power dynamic response under fluctuation of frequency, and rejection ability against harmonic and inter-harmonic voltage. Based on model of inverter, the proposed control strategies are designed in detail. Simulations and experiments are present to validate the effectiveness of proposed method.

A Pogorelov polytope is a combinatorial simple 3-polytope realizable in the Lobachevsky (hyperbolic) space as a bounded right-angled polytope. It has no 3- and 4-gons and may have any prescribed numbers of k-gons, k ≥ 7. Any polytope with only 5-, 6- and at most one 7-gon is Pogorelov. For any other prescribed numbers of k-gons, k ≥ 7, we give an explicit construction of a Pogorelov and a non-Pogorelov polytopes. Any Pogorelov polytope different from Löbel polytopes can be constructed from the 5- or the 6-barrel by cuttings off pairs of adjacent edges and connected sums with the 5-barrel along a 5-gon with the intermediate polytopes being Pogorelov. For fullerenes there is a stronger result. Any fullerene different from the 5-barrel and the (5, 0)-nanotubes can be constructed by only cuttings off adjacent edges from the 6-barrel with all the intermediate polytopes having 5-, 6- and at most one additional 7-gon adjacent to a 5-gon. This result can not be literally extended to the latter class of polytopes. We prove that it becomes valid if we additionally allow connected sums with the 5-barrel and 3 new operations, which are compositions of cuttings off adjacent edges. We generalize this result to the case when the 7-gon may be isolated from 5-gons.

Background: Amyloid beta peptides (Aβ) have been identified as the main pathogenic agents in Alzheimer’s disease (AD). Soluble Aβ oligomers, rather than monomer or insoluble amyloid fibrils, show membrane-binding capacity to red blood cells (RBCs) and trigger several morphological and functional alterations in RBCs that can result in impaired oxygen transport and delivery. Since bioactive lipids have been recently proposed as potent protective agents against Aβ toxicity, we investigated the role of sphingosine-1-phosphate (S1P) in signaling pathways involved in the mechanism underlying ATP release in Aβ-treated RBCs. Methods: In RBCs following different treatments, ATP, 2,3 DPG, cAMP levels, and caspase 3 activity were determined by spectrophotometric and immunoassay. Results: S1P rescued the inhibition of ATP release from RBCs triggered by Aβ through a mechanism involving caspase-3 and restoring 2,3 DPG and cAMP levels within the cell. Conclusions: These findings reveal the molecular basis of S1P protection against Aβ in RBCs and suggest new therapeutic avenues in AD.

This work addresses the problem of automatic head pose estimation and its application in 3D gaze estimation using low quality RGB--D sensors without any subject cooperation or manual intervention. The previous works on 3D head pose estimation using RGB--D sensors require either an offline step for supervised learning or 3D head model construction which may require manual intervention or subject cooperation for complete head model reconstruction. In this paper, we propose a 3D pose estimator based on low quality depth data, which is not limited by any of the aforementioned steps. Instead, the proposed technique relies on modeling the subject's face in 3--D rather than the complete head, which in turn, relaxes all of the constraints with the previous works. The proposed method is robust, highly accurate and fully automatic. Moreover, it does not need any offline step. Unlike some of the previous works, the method only uses depth data for pose estimation. The experimental results on the Biwi head pose database confirm the efficiency of our algorithm in handling large pose variations and partial occlusion. We also evaluate the performance of our algorithm on IDIAP database for 3D head pose and eye gaze estimation.

Policymakers, academics, and industry players have been focused on determining whether connected health (CH) is a fad or a trend by looking at its sustainability. Although the significance of innovation in healthcare is gradually rising, a definitive identification and systematic comprehension of the core drivers, structure, content, and pattern of innovation in CH are missing. To bridge this gap, this study re-examines and analyses CH from the perspectives of its industrial chain and structure, to assess its future prospects and sustainability by focusing on how its structures and participants act in the ecosystem. This study involves an inductive theory building approach based on multi-stage, semi-structured interviews (n=60 in total). The results indicate that the core drivers, constituents, and components of CH need to be identified and restructured. A valid discourse, which is missing in the current literature, should be proposed with regard to the sustainability of CH. A sustainable business model innovation (BMI) system and the methods employed to achieve sustainability are suggested to discover indicators for future success. This study enriches the current CH understanding from a technology perspective and suggests some implications for practitioners as well as policymakers to enhance sustainable development in the healthcare sector.

Frequency, amplitude and phase information of the grid voltage are of great importance in constructing a robust controller structure for grid connected inverter systems. This paper presents a simple and robust approach for the instantaneous estimation of positive and negative sequence voltage components under distorted voltage conditions. A second order generalized integrator (SOGI) is used to filter the distorted voltage and to generate orthogonal voltage components for each of the three phases. These filtered and orthogonal components are used for instantaneous calculation of symmetrical components. The implemented method is frequency adaptive; the method is demonstrated and compared to a conventional phase locked loop (PLL) technique with both MATLAB/Simulink simulations and experiments utilizing the dSPACE ds1103 digital controller.

To eliminate the influence of the inconsistency on the cycle life and the available capacity of the battery pack, and improve the balancing speed, a novel inductor-based layered bidirectional equalizer (IBLBE) is proposed. The equalizer is composed of the bottom balancing circuits and the upper balancing circuits, and the two layer circuits both consist of a plurality of balancing sub-circuits, which allow the dynamic adjustment of equalization path and equalization threshold. The battery string is modularized by layered balancing circuits to realize fast active equalization, especially for long battery strings. By controlling the bottom balancing circuits, the individual cells can be balanced in each module. At the same time, the equalization between battery modules can be realized by controlling the upper balancing circuits. Simulation and experimental results demonstrate that the proposed equalizer can achieve fast active equalization for a long battery string, and has the characteristics of multi balancing path, large balancing current and high accuracy. The advantages of the proposed equalizer are further verified by a comparison with existing active equalizer.

Build a special identical equation, use its calculation characters to prove and search for solution of any odd converging to 1 equation through (*3+1)/2^k operation, change the operation to (*3+2^m-1)/2^k, and get a solution for this equation, give a specific example to verify. Thus prove the Collatz Conjecture is true. Furthermore, analysis the sequences produced by iteration calculation during the procedure of searching for solution, build a weight function model, prove it decrease progressively to 0, build a complement weight function model, prove it increase to its convergence state. Build a (*3+2^m-1)/2^k odd tree, prove if odd in (*3+2^m-1)/2^k long huge odd sequence can not converge, the sequence must outstep the boundary of the tree after infinite steps of (*3+2^m-1)/2^k operation.

Ageing is associated with a decline in both Nrf2 activity and DNA repair efficiency, leading to the accumulation of DNA damage and an increased risk of cancer. Understanding the mechanisms behind the increased level of damaged DNA during ageing is crucial for developing interventions to mitigate age-related cancer risk and improve overall health in older individuals. (Poly)phenols are plant-derived bioactive compounds that undergo metabolism into simpler phenolic catabolites following ingestion. While these compounds have been associated with various health benefits, further analysis of their bioavailable catabolites is necessary. To this end, four phenolic catabolites derived from colonic microbiota were investigated for their ability to reduce DNA damage in response to oxidative challenge and modulate the Nrf2-Antixoidant Response Element pathway. Normal and adenocarcinoma colonocyte cell lines (CCD 841 CoN, & HT29 respectively) were exposed to sub cytotoxic concentrations (>10 µM,) of hydroxylated (4-hydroxybenzoic acid, 3-(3’-hydroxyphenyl) propionic acid) and non-hydroxylated (benzoic acid or 3-phenylpropionic acid) phenolic acids. Using the COMET assay, each catabolite demonstrated significant (p<0.001) geno-protective activity, albeit with varying potency. They also significantly modulated expression of key genes in the Nrf2-ARE pathway, including Nrf2, Heme oxygenase-1 (HO-1), and NAD(P)H dehydrogenase quinone 1 (NQO1). Hydroxylation of the phenolic acids appeared to have a limited effect with respect to bioactivity. Overall, the colon derived phenolic metabolites, when assessed at physiologically relevant concentrations, reduced DNA damage in both normal and adenocarcinoma colonic cells in response to oxidative challenge, mediated – at least in part via upregulation of the Nrf2-ARE pathway.

Fundamental principles of modern cities and urban planning are challenged during the COVID-19 pandemic, such as the advantages of large city size, high density, mass transport, free use of public space, unrestricted individual mobility in cities. These principles shaped the development of cities and metropolitan areas for more than a century, but currently, there are signs that they have turned from advantage to liability. Cities Public authorities and private organisations responded to the COVID-19 crisis with a variety of policies and business practices. These countermeasures codify a valuable experience and can offer lessons about how cities can tackle another grand challenge, this of climate change. Do the measures taken during the COVID-19 crisis represent a temporal adjustment to the current health crisis? Or do they open new ways towards a new type of urban development more effective in times of environmental and health crises? We address these questions through literature review and three case studies that review policies and practices for the transformation of city ecosystems mostly affected by the COVID-19 pandemic: (a) the central business district, (b) the transport ecosystem, and (c) the tourism-hospitality ecosystem. We assess whether the measures implemented in these ecosystems shape new policy and planning models for higher readiness of cities towards grand challenges. And how, based on this experience, cities should be organized to tackle the grand challenge of environmental sustainability and climate change.

The interpretation of land use and land cover (LULC) is an important issue in the fields of high-resolution remote sensing (RS) image processing and land resource management. Fully training a new or existing convolutional neural network (CNN) architecture for LULC classification requires a large amount of remote sensing images. Thus, fine-tuning a pre-trained CNN for LULC detection is required. To improve the classification accuracy for high resolution remote sensing images, it is necessary to use another feature descriptor and to adopt a classifier for post-processing. A fully connected conditional random fields (FC-CRF), to use the fine-tuned CNN layers, spectral features, and fully connected pairwise potentials, is proposed for image classification of high-resolution remote sensing images. First, an existing CNN model is adopted, and the parameters of CNN are fine-tuned by training datasets. Then, the probabilities of image pixels belong to each class type are calculated. Second, we consider the spectral features and digital surface model (DSM) and combined with a support vector machine (SVM) classifier, the probabilities belong to each LULC class type are determined. Combined with the probabilities achieved by the fine-tuned CNN, new feature descriptors are built. Finally, FC-CRF are introduced to produce the classification results, whereas the unary potentials are achieved by the new feature descriptors and SVM classifier, and the pairwise potentials are achieved by the three-band RS imagery and DSM. Experimental results show that the proposed classification scheme achieves good performance when the total accuracy is about 85%.

Penetration of grid connected inverters (GCI) has arisen in power systems due to increasing integration of renewable sources. However, restrictive grid codes require that renewable sources connected to the grid with power electronic systems must be properly connected and appropriate currents must be injected to support stability of the grid under grid faults. Simultaneous injection of symmetrical positive and negative sequence currents is mandatory to support stabilization of grid at the instant of grid faults. Conventional synchronously rotating frame dq current controllers are insufficient under grid faults due to low bandwidth of PI controllers. This paper proposes a new grid current control strategy for grid connected voltage source inverters under unbalanced grid voltage conditions. A proportional current controller with a first order low pass filter disturbance observer (DOb) is proposed which establishes positive sequence power requirements and independently control negative sequence current components under unbalanced voltage conditions. The method does not need any parameter, since it estimates nonlinear terms with low pass filter DOb. Simulations are implemented in Matlab/Simulink platform demonstrating the effectiveness of proposed method.

Spinocerebellar ataxia type 3 is a neurodegenerative disease caused by an abnormal expansion of CAG repeats in the disease gene ATXN3, leading to prolonged polyglutamine (polyQ) tracts in the respective protein ataxin-3. The polyQ-expanded protein forms polyQ-containing aggregates in several brain regions which leads to neuronal cell loss. Autophagy is thought to play a significant role in clearing these polyQ-containing protein aggregates. Therefore, the autophagy mechanism was investigated in SCA3 with focus on the autophagic protein p62/sequestosome-1. Human and mouse RNA sequencing data were analyzed to determine RNA expression level of autophagic genes. Additionally, autophagy was studied in the SCA3 304Q knock-in mouse model and through several cell culture experiments using HEK-293T cells transfected with ATXN3 of differ-ent polyQ lengths. For cell culture experiments, autophagy was induced with rapamycin treat-ment, proteasomal degradation was blocked with MG132 and degradation of autophagic pro-teins was investigated using cycloheximide treatment. Here, we report an increased autophagy impairment with SCA3 disease progression seen in HEK-293T cells transfected with ATXN3 plasmid with expanded polyQ tracts, higher aged 304Q-knock-in mice, or human post-mortem brain material. Furthermore, co-localized aggregation of the autophagic protein p62 and the dis-ease protein ATXN3 was observed in the course of SCA3 disease. Therefore, we suggest a signifi-cant role for p62 in aggregate formation seen in the neurodegenerative disease SCA3.

To understand the biological relevance and mode of action of artificial protein ligands, crystal structures with their protein targets are essential. Here, we describe and investigate all known crystal structures that contain a so-called “molecular tweezer” or one of its derivatives with an attached natural ligand on the respective target protein. The aromatic ring system of these compounds is able to include lysine and arginine side chains, supported by one or two phosphate groups that are attached to the half-moon shaped molecule. We analyse the corresponding crystal structures with 14-3-3 proteins in complex with mono- and diphosphate tweezers. Furthermore, we solved crystal structures of two different tweezer variants in complex with the enzyme 1-Pyrroline-5-carboxyl-dehydrogenase (P5CDH), and found that the tweezers are bound to a lysine and methionine side chain, respectively. The different binding modes and their implications for affinity and specificity are discussed, as well as the general problems in crystallizing protein complexes with artificial ligands.

For Interferometry Synthetic Aperture Radar (InSAR), the normal baseline is one of the main factors that affect the accuracy of the ground elevation. For Gaofen-3 (GF-3) InSAR processing, the poor accuracy of the real-time orbit determination resulting in a large baseline error, leads to the modulation error in azimuth and the slope error in range for timely Digital Elevation Model (DEM) generation. In order to address this problem, a baseline estimation method based on external DEM is proposed in this paper. Firstly, according to the characteristic of the real-time orbit of GF-3 images, orbit fitting is executed to remove the non-linear error factor. Secondly, the height errors are obtained in slant-range plane between Shuttle Radar Topography Mission (SRTM) DEM and the GF-3 generated DEM after orbit fitting. At the same time, the height errors are used to estimate the baseline error which has a linear variation. In this way, the orbit error can be calibrated by the estimated baseline error. Finally, DEM generation is performed by using the modified baseline and orbit. This procedure is implemented iteratively to achieve a higher accuracy DEM. Based on the results of GF-3 interferometric SAR data for Hebei, the effectiveness of the proposed algorithm is verified and the accuracy of GF-3 real-time DEM products can be improved extensively.

With the increasing prominence of renewable energy sources providing flexibility to the power grid, there is a growing recognition of the need to expand virtual Energy Storage Systems (ESS) to replace traditional ESS, which faces challenges in terms of supply and scalability. Grid-connected microgrids can supply power stably and are being built, so they can be used as virtual ESS to provide flexibility to the power system. This study proposes an approach to determine the optimal Power Conversion System (PCS) and battery capacity for a Virtual Energy Storage System(VEES) based on a grid-connected microgrid incorporating Photovoltaic (PV) and ESS. In this paper, it is assumed that microgrids can provide flexibility to the grid by participating in the energy trading market, there are corresponding profits and penalties for order. Numerical examples are performed to demonstrate the effectiveness of the proposed method.

Overhead power transmission line icing (PTLI) disasters are one of the most severe dangers to power grid safety. Automatic iced transmission line identification is critical in various fields. However, existing methods primarily focus on the linear characteristics of transmission lines, employing a two-step process involving edge and line detection for PTLI identification. Nonetheless, these traditional methods are often difficult when confronted with challenges such as background noise or variations in illumination, leading to incomplete identification of the target area, missed target regions, or misclassification of background pixels as foreground. We propose a new iced transmission line identification scheme to overcome this limitation. In the initial stage, we integrate the image restoration method with image filter enhancement to restore the image's color information. This combined approach effectively retains valuable information and preserves the original image quality, thereby mitigating noise presented during the image acquisition. Subsequently, in the second stage, we introduce an enhanced multi-threshold algorithm to separate background and target pixels. After image segmentation, we enhance the image and obtain the region of interest (ROI) through connected component labeling modification and mathematical morphology operations, eliminating background regions. Our proposed scheme achieves an accuracy value of 97.72%, a precision value of 96.24%, a recall value of 86.22%, and the specificity value of 99.48% based on the average value of test images. Through object segmentation and location, the proposed method can avoid background interference, effectively solve the problem of transmission line icing identification, and achieve 90% measurement accuracy compared to manual measurement on the collected PTLI dataset.

This work presents a control scheme to control the grid-connected single-phase photovoltaic (PV) system. The considered system has four 250W solar panels, a non-inverting buck-boost DC-DC converter, and DC-AC inverter with LCL filter. The control system aims to track and operate at the maximum power point (MPP) of PV panels, regulate the voltage of DC link, and supply the grid with a unity power factor. To well achieve these goals, the proposed control system consists of three parts, that are MPP tracking controller module with a fuzzy-based modified incremental conductance (INC) algorithm, a DC-link voltage regulator with a hybrid fuzzy proportional-integral (PI) controller, and a Current Controller module using the linear quadratic regulator (LQR) for grid-connected power. Based on fuzzy control and LQR, this work introduces a full control solution for grid-connected single-phase PV systems. The key novelty of this research is to analyze and prove that the newly proposed method is more successful in numerous aspects by comparing and evaluating the previous and present control methods. The designed control system settles quickly, which is critical for output stability. In addition, as compared to backstepping approach used in our past study, the LQR technique is more resistant to sudden changes and disturbances. Furthermore, backstepping method produces the larger overshoot, which has a detrimental impact on efficiency. Simulation findings under various weather conditions were compared to theoretical ones to indicate that the system can deal with variations in weather parameters.

Breast cancer develops upon sequential acquisition of driver mutations in mammary epithelial cells; however how these mutations collaborate to transform normal cells remains unclear in most cases. We aimed to reconstitute this process in a particular case. To this end, we combined the activated form of the PI 3-kinase harboring the H1047R mutation with the inactivation of the histone lysine methyl-transferase KMT2D in the non-tumorigenic human mammary epithelial cell line MCF10A. We found that PI 3-kinase activation promoted cell cycle progression, especially when growth signals were limiting, as well as cell migration, both in a collective monolayer and as single cells. Furthermore, we showed that KMT2D inactivation had relatively little influence on these processes, except for single cell migration that KMT2D inactivation promoted in synergy with PI 3-kinase activation. Combination of these two genetic alterations induced expression of the ARPC5L gene that encodes a subunit of the Arp2/3 complex. ARPC5L depletion fully abolished the enhanced migration persistence exhibited by double-mutant cells. Our reconstitution approach in MCF10A has thus revealed both the cell function, single cell migration, and the underlying Arp2/3-dependent mechanism, which are synergistically regulated when KMT2D inactivation is combined with the activation of the PI 3-kinase.

Among cross-sectional imaging modalities, computed tomography (CT) is more available and faster; however, magnetic resonance (MR) performs better in terms of sensitivity and specificity, due to its higher contrast resolution. The appearance of peritoneal deposits on CT and MR depends mainly on the primary tumour histology: in case of unknown primary tumour (3-5% of cases), their behaviour at imaging may provide insights on the tumour origin. The time-point of tumour evolution, previous or ongoing treatments and the peritoneal spaces where they occur, also play an important role in determining the appearance of peritoneal deposits. Thus, knowledge of peritoneal anatomy and fluid circulation is mandatory in detection and characterization of peritoneal deposits. Several benign and malignant conditions may show similar imaging features that overlap those of PC, making the differential diagnosis challenging. Clinical history, laboratory findings and previous imaging examinations must be considered to achieve the correct diagnosis.

Cellulose nanocrystals (CNCs) are a kind of nano-inclusions that have experienced tremendous expansion in the material industry due to their outstanding mechanical qualities, sizable surface area, and capacity for functional tuning. Due to their vast potential, however, present practises fall short of fully using them. For example, employing CNCs in various matrices with various surface chemistries can be challenging; this problem tends to get worse if the focus is furthered on bio-based applications. This paper reviews the use of CNCs as fillers in natural and man-made polymers; we have explored in depth the production, characterisation, and of CNCs from various sources and their inclusion into various matrices. Surface alterations and the introduction of CNCs in biodegradable polymer can have a significant impact on several industrial behemoths such as tissue engineering and biomedical applications; therefore, pursue of current manuscript is extremely warranted. Throughout the manuscript various assembly techniques that involves alteration and adjustment of polymer network in building up a hydrogel with higher fracture energy and mechanical properties are also included. From rheological perspective the hydrogel processing is also discussed with some models routinely used in the literature to describe these hydrogels. Finally, bio-based hydrogels mechanically reinforced with CNCs such as Xanthan Gum, Alginate, protein, and polysaccharides were discussed.

Background: Monoclonal antibodies against PD-1 or PD-L1 are established in clinical practice for the treatment of both early and advanced/metastatic triple-negative breast cancer. Beyond the established immune checkpoints (ICPs) (PD-1 and CTLA-4) additional ICPs such as lymphocyte activation gene-3 (LAG-3) are subject of current research. In the present retrospective gene ex-pression analysis, we evaluated the prognostic significance of LAG-3 in 461 patients with early breast cancer. In addition, we examined whether there was a correlation between the different ICPs and CD8 expression. Methods: Using microarray-based gene expression analysis, we examined the prognostic signif-icance for metastasis-free survival (MFS) of LAG-3 mRNA expression in the whole cohort of 461 breast cancer patients and among different molecular subtypes. Correlations were analyzed us-ing Spearman-Rho correlation coefficient. Results: In the whole cohort, LAG-3 expression had no significant impact on MFS (p = 0.712, Log Rank). In the subgroup analyses, there was a trend, that higher LAG-3 expression was associated with favorable outcome in the luminal B (p = 0.217), basal-like (p = 0.370) and HER2 (p = 0.089) subtypes, although significance was not reached. In contrast, in multivariate Cox regression analysis adjusted for age, tumor size, axillary nodal status, histological grade of differentiation and the proliferation marker Ki-67, LAG-3 showed a significant influence on MFS (HR 0.574; 95% CI 0.369–0.894; p = 0.014). High LAG-3 significantly correlated with CD8 ( = 0.571; p < 0.001). Conclusion: LAG-3 expression had an independent impact on MFS. In addition to PD-1 and PD-L1, further immune checkpoints such as LAG-3 could serve as therapeutic targets in breast cancer.

Salivarian trypanosomes are extracellular parasites causing anthroponotic and zoonotic infections. Anti-parasite vaccination in considered the only sustainable method for global trypanosomosis control. Unfortunately, not a single field applicable vaccine solution has been successful so far. Active destruction of the host’s adaptive immune system by trypanosomes is believed to contribute to this problem. Here we show Trypanosome brucei brucei infection results in the lasting obliteration of immunological memory, including vaccine-induced memory against non-related pathogens. Using the well-established DTPa vaccine model in combination with a T. b. brucei infection and diminazene diaceturate anti-parasite treatment scheme, our result demonstrate that while the latter ensured the full recovery from the T. b. brucei infection, it failed to restore an efficacious anti-pertussis vaccine recall response. DTPa vaccine failure coincided with a shift in the IgG1/IgG2a anti-pertussis antibody ratio in favor of the latter, and a striking impact on all spleen immune cell populations. Interestingly, an increased plasma IFNy level in DTPa vaccinated trypanosome infected mice did result in a temporary antibody-independent improvement of early-stage trypanosomosis control. In conclusion, our results are the first to show that trypanosome inflicted immune damage is permanent, and is not restored by successful anti-parasite treatment.

NS-3 is one of the most used Network Simulators because it includes different modules, applications and protocols to simulate a wide range of network. Since new proposals usually involve a large number of simulations, a procedure to automatize the simulation process and extract statistics is very useful. "Statistical Framework" (SF) is an important module of NS-3 because it fulfills this need. SF allows us to collect simulation data and obtain statistical reports for NS-3. In this report, we present a detailed description of statistical framework module and two useful examples of its configuration.

Network Simulators is typically used to study services and applications in complex scenarios due to the infeasibility of deploying real testbeds. Many problems can be solved by using network simulators such as NS-3. With this in mind, the aim of this article is to introduce new NS-3 users through detailed information. It is sometimes difficult to handle by new users the traditional manuals developed by NS-3 project official website. In this article, NS-3 for communication network and Eclipse Integrated Development Environment (IDE) for powerful programming language are integrated step-by-step, explaining the main features of these open source software packages and concluding with an example simulation. Our effort is to make it easy for a beginner to be part of the NS-3 research community and to maintain an open environment of knowledge.

The co-occurrence of depression and obesity has become a significant public health concern worldwide. Recent studies have shown that metabolic dysfunction, which is commonly observed in obese individuals and characterized by inflammation, insulin resistance, leptin resistance, and hypertension, is a critical risk factor for depression. This dysfunction may induce structural and functional changes in the brain, ultimately contributing to depression's development. Given that obesity and depression mutually increase each other's risk of development by 50-60%, there is a need for effective interventions that address both conditions. The comorbidity of depression with obesity and metabolic dysregulation is thought to be related to chronic low-grade inflammation, characterized by increased circulating levels of pro-inflammatory cytokines, and C-reactive protein (CRP). As pharmacotherapy fails in at least 30-40% of cases to adequately treat major depressive disorder, a nutritional approach is emerging as a promising alternative. Omega-3 polyunsaturated fatty acids (n-3 PUFAs) are a promising dietary intervention that can reduce inflammatory biomarkers, particularly in patients with high levels of inflammation, including pregnant women with gestational diabetes, patients with type 2 diabetes mellitus, and overweight individuals with major depressive disorder. Further effort directed to implement these strategies in clinical practice could contribute to improved outcomes in patients with depression and comorbid obesity and/or metabolic dysregulation.

Rationale: The 14-3-3 protein family is known to interact with many proteins in non-cardiac cell types to regulate multiple signaling pathways, particularly those relating to energy and protein homeostasis; and the 14-3-3 network is a therapeutic target of critical metabolic and proteostatic signaling in cancer and neurological diseases. Although the heart is critically sensitive to nutrient and energy alterations, and multiple signaling pathways coordinate to maintain the cardiac cell homeostasis, neither the structure of cardiac 14-3-3 protein interactome, nor potential functional roles of 14-3-3 protein-protein interactions (PPIs) in heart has been explored. Objective: To establish the comprehensive landscape and characterize the functional role of cardiac 14-3-3 PPIs. Methods and Results: We evaluated both RNA expression and protein abundance of 14-3-3 isoforms in mouse heart, followed by co-immunoprecipitation of 14-3-3 proteins and mass spectrometry in left ventricle. We identified 52 proteins comprising the cardiac 14-3-3 interactome. Multiple bioinformatic analyses indicated that more than half of the proteins bound to 14-3-3 are related to mitochondria; and the deduced functions of the mitochondrial 14-3-3 network are to regulate cardiac ATP production via interactions with mitochondrial inner membrane proteins, especially those in mitochondrial complex I. Binding to ribosomal proteins, 14-3-3 proteins likely coordinate protein synthesis and protein quality control. Localizations of 14-3-3 proteins to mitochondria and ribosome were validated via immunofluorescence assays. The deduced function of cardiac 14-3-3 PPIs is to regulate cardiac metabolic homeostasis and proteostasis. Conclusions: Thus, the cardiac 14-3-3 interactome may be a potential therapeutic target in cardiovascular metabolic and proteostatic disease states, as it already is in cancer therapy.

This paper examines the learning experience of an inter-faculty higher education course conducted in an expanded remote format, using digital space as facilitator. The study focuses on the implementation of personalized education, a pedagogical approach that emphasizes the diversification of resources, strategies, and actions to empower learners in assigning personal value and meaning to their learning journey. By presenting an action research project, this study highlights the pivotal role of personalized education in guiding the course design. To foster an engaging learning environment, the course incorporated open activities and leveraged tools and platforms of the social web. Through these means, the participants, forming a community of practice, were able to collaboratively generate knowledge before, during, and after synchronous sessions. Furthermore, the participants effectively disseminated this knowledge through networks and engaged in discussions with external stakeholders. The study underscores how personalized education facilitates situated and meaningful learning by fostering expanded, flexible, and distributed experiences. These experiences revolve around a transmedia narrative that seamlessly integrates digital culture into learning opportunities and processes, effectively naturalizing its presence. The results highlight the value of personalized education approaches in adapting to the complexities of the digital age and establishing meaningful learning experiences for students.

The recent advancements in the field of communication have led data sharing to become an integral part of today's smart cities with the evolution of concepts such as the internet of vehicles (IoV) paradigm. As a part of IoV, Electric Vehicles (EVs) have recently gained momentum as authorities have started expanding their Low Emission Zones (LEZ) in an effort to build green cities with low carbon footprints. Energy is one of the key requirements of EVs not only to support the smooth and sustainable operation of EV itself but to also ensure connectivity between the vehicles and infrastructure with controlling devices like sensors and actuators installed within an EV. In this context, renewable energy sources (such as wind energy) dramatically play their parts in the automobile sector towards designing the energy harvesting electric vehicles (EH-EV) to pare the energy reliance on the national grid. In this article, a novel approach is presented to achieve electric generation due to vehicle mobility to support the communication primitives in electric vehicles which enables plenty of IoV use cases in the presence of surplus energy at hand. A small-scale wind turbine is designed to harness wind power for converting it into mechanical power. This power is then fed to the onboard DC generator to produce electrical energy. Furthermore, the acquired power is processed through a regulation circuitry to consequently achieve the desired power supply for the end load, i.e. the batteries installed. The suitable orientation for efficient power generation is proposed on ANSYS-based aerodynamics analysis. The voltages induced by DC generator at No-Load condition are 35V while at Full-Load 25V are generated at rated current of 6.9A, along with the generation of power at around 100W (at constant voltage) at the rated speed of 90 mph for nominal battery charging. Moreover, the acquired data can be monitored via an android application interface by using a Bluetooth module.

Roundabouts need capacity and safety improvements compatible with manual-driven, not only with autonomous vehicles. The signaling and control of roundabouts must evolve and incorporate current technologies. For that, we approach roundabouts as synchronous switches of vehicles. This paper describes Synchronous Roundabouts with Rotating Priorities, a roundabout control system based on vehicle platoons arriving at the roundabout at speed identical to the roundabout and within the time slot assigned to their entry, avoiding conflicts and stops, thus increasing roundabout capacity and safety. Signaling is visual for human drivers and also wireless for connected and autonomous vehicles. We evaluate analytically and with simulations roundabouts of different radius for several values of the average distance between vehicles. Average delays are 28,7 % lower, with negligible dispersion. The capacity improvements depend on design parameters: in our set is moderate for small roundabouts but goes up to 70-100 % for short distances and medium and large roundabouts.

Besides the increase in global energy demand, access to clean energy, reduction in greenhouse gas emissions caused by conventional power generation sources, energy security, and availability of electricity in remote villages in emerging nations are some of the factors that foster the use of renewable energy sources (RESs) in generating electricity. One of the aims of initiating microgrids (MGs) is to maximize the benefits of RES and alleviate the associated grid integration issues. Microgrids are made up of RES connected to electrical loads within clearly delineated electrical limits that operate as individual controllable units on the electrical network. It can operate in-dependently as well as in connection with the grid. The paper presents an overview of microgrids and investigates the system's performance when connected to and disconnected from the grid. Furthermore, in both modes of operation, the functioning and behavior of system components such as the bidirectional DC-DC converter and energy storage system (ESS) were evaluated. The architecture of the proposed microgrid consists of a small hydropower plant, a wind farm, and a battery energy storage system (BESS). The microgrid under investigation is modeled and simu-lated using MATLAB and Simulink.

Although multiple sclerosis (MS) is an inflammatory demyelinating disease of the central nervous system (CNS) that results in many neurological disabilities, optic neuritis (ON) is developed in some MS patients. However, the molecular mechanism of ON remains unknown. Galectins, β-galactoside-binding lectins, are involved in various pathophysiology. We have previously shown that galectin-3 (gal-3) is associated with the pathogenesis of experimental autoimmune encephalomyelitis (EAE), its animal model for human MS. In the current study, the expression of gal-3 was explored in the visual pathway of the EAE mice to clarify the pathogenesis of ON. Immunohistochemical analysis demonstrated that expression of gal-3 was increased in the visual pathway of the EAE mice during the peak disease, compared with naïve and EAE mice during the chronic disease. Expression of gal-3 was observed in mainly microglia/macrophages and astrocytes in the visual pathway of the EAE mice. In addition, gal-3+Iba-1+ cells with the phagocytic activities reflected by immunostaining with cathepsin-D were accumulated at demyelinating lesions in the visual pathway during peak disease of EAE. Moreover, NLRP3 expression was also detected in most gal-3+Iba-1+ cells. These results indicate a considerable possibility that gal-3 regulates the NLRP3 signaling in microglia/macrophages, followed by neuroinflammatory demyelination in ON. By contrast, astrocytic expression of gal-3 was also observed from the peak to the chronic disease. Taken together, the current study suggests a critical role of gal-3 in the pathogenesis of ON and proposes gal-3 in glial cells as a potential therapeutic target for ON.

The patient was a 44-year-old woman with suspected Stevens-Johnson syndrome due to Baktar® (sulfamethoxazole trimethoprim) medication received at our outpatient dermatology clinic. Histopathological examination of the epidermis, dermis, and subcutaneous adipose tissue samples showed numerous necrotic keratinocytes in the epidermis. Apoptotic nuclei were visualized as diaminobenzidine brown deposits with immunoperoxidase staining for cleaved caspase-3. Cleaved-caspase3-positive findings were consistent with eosinophilic material that appeared to be necrotic cells within the epidermis. Therefore, these eosinophilic materials must be apoptotic bodies. Generally speaking, and especially in Japan, these materials are considered necrotic keratinocytes. To our best knowledge, no studies have used apoptotic immunohistochemical markers to examine whether these structures are apoptotic.

Crohn's disease is a non-specific inflammatory bowel disease, which is a chronic condition that affects the ileum and/or large intestine. At the same time, it can also involve any other part of the human body, that is, from the mouth to the anus. The symptoms are very bothersome and cause a significant reduction in quality of life and sometimes even crippling permanent damage to the gastrointestinal tract, which requires enteral or parenteral nutrition for life. The purpose of this study was to investigate tissue metalloproteinases as markers of recurrent Crohn's disease. The experimental groups included 31 patients and 10 patients with normal Crohn's disease, ranging in age from 23-70 years, with a mean age of 40.4. Collected tissues were frozen and then fragmented tissues were homogenized with Ripa Lysis buffer on ice. The supernatant was collared and four metalloproteinases - MMP 3, MMP 7, MMP 8 and MMP 9 - were an-alized by Enzyme-linked Immunosorbent Assay using SEA101HU, SEA102Hu, SEA103Hu and SEA553Hu kits (Cloud-Clone Corp., Kata, TX, USA). All chemical analyses were performed in triplicate. Metalloproteinase content was expressed as mean ± standard deviation. Metalloproteinase 3 and metalloproteinase 8) significantly influenced the possibility of Crohn recurrence

The antibodies targeting invasive proteins of Plasmodium falciparum (Pf) merozoites is a clever strategy against malaria parasite. The recent finding that Plasmodium merozoites surface enolase is a target for growth neutralizing antibodies has generated interest in identifying its re-ceptor (s) on erythrocytes. In the present study, several biochemical experiments were undertaken involving recombinant Pf enolase and antibody against it to search for its cognate receptor. The binding of rPfeno to erythrocytes was selectively sensitive to trypsin but resistant to neuramini-dase. Failure of yeast enolase binding to human red blood cells under similar conditions indicat-ed high specificity of parasite Pfeno. The mass spectrometric and immunological analyses of pro-teins obtained in pull downs and co-immunoprecipitation samples led to identification of band 3 as an interactor/receptor for Plasmodium enolase. Structural characterization of sequences of band 3 - rPfeno interacting regions revealed C-terminal exocytic regions of band 3 to be binding to Pfeno. Similarly, band 3 binding regions of rPfeno were also identified. Identification of receptor-ligand (band 3: Pfeno) pair paves the way for antimalarial anti-Pf enolase-based vaccine, anti-Pf enolase antibodies as drug and also for developing novel small molecule-based invasion inhibi-tory therapeutics including peptidomimetics that could disrupt the band 3: Pfeno protein-protein interactions.

Abstract: Oxidative metabolism is crucial for leukemic stem cell (LSC) function and drug resistance in acute myeloid leukemia (AML). Mitochondrial metabolism also affects the immune system and therefore the antitumor response. Modulation of oxidative phosphorylation (OxPHOS) has emerged as a promising approach to improve therapy outcome for AML patients. However, the effect of mitochondrial inhibitors on the immune compartment in the context of AML is yet to be explored. Immune checkpoints such as the ecto-nucleotidase CD39 and programmed dead ligand 1 (PD-L1) have been reported to be expressed in AML and linked to chemoresistance and poor prognosis. In the present study, we first demonstrated that a novel selective electron transfer chain complex (ETC) I inhibitor, EVT-701, decreased OxPHOS metabolism of murine and human cytarabine (AraC)-resistant leukemic cell lines. Furthermore, we showed that, while AraC induced immune response regulation by increasing CD39 expression and by reinforcing interferon-γ/PD-L1 axis, EVT-701 reduced CD39 and PD-L1 expression in vitro in a panel of both murine and human AML cell lines, especially upon AraC treatment. Altogether, this work uncovers a non-canonical function of ETCI in controlling CD39 and PD-L1 immune checkpoints, thereby improving the anti-tumor response in AML.

Thanks to the pioneering studies of Østerud and co-workers it is now increasingly understood that natural polyphenols present in marine oils play an essential role in protecting omega-3 lipids from oxidation and autooxidation ensuring that no proinflammatory products are formed after intake as it often happens with assumption of refined omega-3 concentrates. Strong antioxidants exerting multiple biological functions, olive biophenols are ideally suited to functionalize marine oils creating a synergy which has the potential to foster public health across the world. This study identifies suitable avenues to advance the sustainable production of health-beneficial formulations based on newly obtained natural marine oils and olive phenolic extracts. Important educational outcomes for bioeconomy educators conclude the study.

This document describes the theoretical basis of the algorithms used to determine properties of snow and ice from the measurements of the Ocean and Land Color Instrument (OLCI) onboard Sentinel-3 satellites within the Pre-operational Sentinel-3 snow and ice products (SICE) project: http://snow.geus.dk/. The code used for the SICE retrieval and its documentation can be found at https://github.com/GEUS-SICE/pySICE. The algorithms were developed after the work from Kokhanovsky et al. (2018, 2019, 2020).

Inflammation is an essential protective response against injury or infection. Physiological inflammation eliminates the pathogen, promotes tissue repair and healing. An exaggerated, out of control inflammation, however, can become pathological. Inflammation can generate secondary cell damage, inflame the vessels (endothelitis), activate coagulation processes. Among these pathogenetic factors (cell damage, inflammation, endothelitis, coagulopathies), self-amplification mechanisms can be created, spreading beyond the initial site, up to Multiple Organ Failure (MOF) and host death. If the inflammation does not resolve in a physiological way, the remodeling of the tissues can be maladaptive and lead to the onset of chronic inflammatory degenerative diseases. Diseases such as sepsis, burns, polytrauma, severe forms of influenza or COVID-19, are characterized by a condition of hyperinflammation, associated with a condition of immunosuppression. The initial events triggered by the pathogen (cell damage, interferon response in the case of viruses) ignite the inflammation by activating the inflammasome, the transcription factor NFkB, the release of pro-inflammatory eicosanoids (Prostaglandins, Leukotrienes, Thromboxanes) by neutrophils and macrophages. Hence, the cells of the innate immune system produce pro-inflammatory cytokines. Indeed, the ‘’eicosanoid storm’’ precedes the ‘’cytokine storm’’. Eicosanoids are a group of potent endogenous lipid mediators derived from omega-6 fatty acids Arachidonic Acid (AA). Eicosanoids include a group of molecules with pro-inflammatory (Prostaglandins, Leukotriens) and pro-coagulant (Thromboxanes) action. In addition, Arachidonic Acid (AA) is the source of Lipoxins (LXs). Lipoxins belong to a group of molecules collectively referred to as specialized pro-solving mediators (SPMs) which also include molecules derived from w-3 eicosapentaenoic acid (EPA): Resolvins (ReV-E sieres) and w-3 docohexanoic (DHA): Resolvins D-series (ReV D-series); Protectins (PTs); Maresins (MaRs). SPMs are important for the resolution phase of inflammation to take place properly. Their deficiency could be involved in both acute uncontrolled inflammation and chronic inflammation. The active regulation of the acute inflammatory process, integrating the precursors of Specialized Pro-resolving Mediators (SPMs), such as ⍵-6 and ⍵-3 in balanced ratio, or the SPMs themselves, could be a complementary therapeutic approach useful for taming the "storm of cytokines '' which characterizes exaggerated forms of inflammation. ⍵-3 and ⍵-6 are part of already widely used, readily available, inexpensive and safe supplements. Resolvins have already been included in clinical trials for various other inflammatory diseases (eye diseases, periodontal diseases).

A shrimp oil rich in omega-3 lipids and carotenoids is obtained in remarkably high 5 wt% yield extending to pink shrimp processing waste (head and carapace) the circular economy approach to extract fish oil from fish processing by-products using d-limonene. Biobased limonene, a powerful antimicrobial and antioxidant agent, is an excellent solvent for both lipids and astaxanthin-based carotenoids preventing oxidative degradation during the extraction cycle including solvent and oil separation at 85°C. A new low cost route is established to extract valued marine oil from biowaste annually made available in over 2.2 million tonnes.

Network Simulators (NS) is typically used to study services and applications in complex scenarios due to the infeasibility of deploying real testbeds. This is the case of Mobile Ad hoc Networks (MANETs) which can be extensively used in emergency situations or to gather information without infraestructure. An important factor to get realiable results in the MANETs’ simulations is the wireless channel module of NSs. In this report, we explain how thw wireless channel is implemented in NS-3 and it can be configured.

The efficacy of chemotherapy depends on sensitivity and intrinsic or acquired drug resistance of cancer cells. The n-3 long chain polyunsaturated fatty acids (n-3 LCPUFAs) are considered chemosensitizing agents and revertants of multidrug resistance by pleiotropic mechanisms. The specific mechanisms are not fully understood, but nowadays, it is widely accepted that there are a complex network of mechanisms, including alteration in gene expression, modulation of cellular proliferation and differentiation, induction of apoptosis, generation of reactive oxygen species and lipid peroxidation. A crucial mechanism in the control of cell drug uptake and efflux is related to n-3 LCPUFA influence on membrane lipid composition. The incorporation of docosahexaenoic acid in the lipid rafts produces significant changes in their physical-chemical properties affecting content and functions of transmembrane proteins, such as growth factors, receptors and ATP-binding cassette transporters. Of note, n-3 LCPUFAs often impact on the lipid compositions more in chemoresistant cells than in chemosensitive cells, suggesting their adjuvant role in cancer treatment.

Hypercholesterolemia is a major risk for the development of cardiovascular diseases (CVDs), the main cause of mortality worldwide, and it is characterized by high levels of circulating cholesterol. The drugs currently available for hypercholesterolemia control have several side effects, so it is necessary to develop new effective and safer therapies. Seaweeds serve as sources of several bio-active compounds with claimed beneficial effects. Eisenia bicyclis (Aramé) and Porphyra tenera (Nori) are edible seaweeds which were previously recognized as rich in bioactive compounds. In the present study, we aim to evaluate the anti-hypercholesterolemia effect of these two seaweeds ex-tracts and their health potential. Both extracts, but more efficiently Aramé extract demonstrated to have liver 3-hydroxy-3-methylglutaryl coenzyme A reductase (HMGR) inhibitory activity and to reduce approximately 30 % cholesterol permeation through human Caco-2 cells simulating the intestinal lining, targets for hypercholesterolemia treatments. An untargeted metabolomic assay on human intestinal Caco-2 and liver Hep-G2 cells lines exposed to Aramé and Nori extracts revealed changes in the cell’s metabolism as indicators of the extract’s health beneficial effects. The metabolic pathways affected by exposure to both extracts were associated to lipid metabolism, such as phospholipids, and fatty acid metabolism, pathways of amino acid, cofactors and vitamins and cellular respiration metabolism. More profound for Aramé treated cells, but also seen for Nori ex-posed cells, the metabolites modifications were associated with the protection against CVDs and other diseases and, to the improvement of cells oxidative stress tolerance. The results obtained for the anti-hypercholesterolemia properties, in addition to the revelation of the positive impact on cells metabolism, are an important contribution for further evaluation of these seaweeds extracts as functional foods or for CVDs prevention.

Currently, studies are being conducted on the possible role of the cytoprotective effect of biologically active substances in conditions of cerebral hypoxia or cardiomyopathies. At the same time, oxidative stress is considered as one of the important mechanisms of cellular cytotoxicity and a target for the action of cytoprotectors. The aim of this study is to search for derivatives of 3-(arylmethyl)-6-methyl-4-phenylpyridin-2(1H)-ones. The probability of cytoprotective action was assessed by two tests by measuring cell viability (with neutral red dye and MTT test). It was found that some derivatives of 3-(arylmethyl)-6-methyl-4-phenylpyridin-2(1H)-ones under the conditions of our experiment have a pronounced cytoprotective activity, providing better cell survival in vitro, including the MTT test and conditions of blood hyperviscosity. To correlate the obtained results in vitro, molecular docking of the synthesized derivatives was also carried out. The standard drug omeprazole (co-crystallized with the enzyme) was used as a standard. It was shown that all synthesized derivatives of 3-(arylmethyl)-6-methyl-4-phenylpyridin-2(1H)-ones had higher affinity for the selected protein than the standard gastro-cytoprotector omeprazole. The studied derivatives of 3-(arylmethyl)-6-methyl-4-phenylpyridin-2(1H)-ones also fully satisfy Lipinski's rule of thumb of five (RO5), which increases their chances for possible use as orally active drugs with a good ability to absorption and moderate lipophilicity. Thus, the results obtained make it possible to evaluate derivatives of 3-(arylmethyl)-6-methyl-4-phenylpyridin-2(1H)-ones as having a relatively high cytoprotective potential.

The major auxin, indole-3-acetic acid (IAA), is associated with a plethora of growth and developmental processes including embryo development, expansion growth, cambial activity, and the induction of lateral root growth. Accumulation of the auxin precursor indole-3-acetamide (IAM) induces stress related processes by stimulating abscisic acid (ABA) biosynthesis. How IAM signaling is controlled is, at present, unclear. Here, we characterize an ami1/rooty double mutant, that we initially generated to study the metabolic and phenotypic consequences of a genetic blockade of the indole glucosinolate and IAM pathways in Arabidopsis thaliana. Our mass spectrometric analyses of the mutant revealed that the combination of the two mutations is not sufficient to fully prevent the conversion of IAM to IAA. The detected strong accumulation of IAM was, however, recognized to substantially impair seed development. We further show by genome-wide expression studies that the double mutant is broadly affected in its translational capacity, and that a small number of cell proliferation and plant growth regulating transcriptional circuits are repressed by the high IAM content in the seed. In accordance with the previously described growth reduction in response to elevated IAM levels, our data support the hypothesis that IAM is a growth repressing counterpart to IAA.

Abstract Introduction: Visual perceptual skills are essential for independent participation in self-care tasks, educational, work and leisure time activities. The effect of HIV on the visual perceptual skills is not well understood among children in low resource settings like Zimbabwe. Methods: A cross sectional comparative study was done with 30 children living with HIV and 30 children living without HIV residing in Harare urban area. The TVPS-3 was used to assess their visual perceptual skills. SPSS version 22, STATISTICA 13 and Microsoft 2016 were used for data analysis. Results: Both groups of children had mean percentile ranks below 50 on their TVPS-3 scores. Children without HIV generally performed better than those with HIV but the difference was not statistically significant in most cases. Through univariate analysis, only performance on Spatial Relations significantly differed between the two groups. Both groups had lowest scores in Basic visual perceptual skills. Age and school grade were the independent predictors of the children’s performances in the study. Conclusion: There is need for Occupational therapy services in public primary schools and in the pediatric Opportunistic Infections clinics in hospitals to be part of the health team which caters for children with visual perceptual challenges.

A robust explicit model predictive control (EMPC)-based frequency adaptive grid voltage sensorless control is developed for a grid-connected inverter (GCI) via a linear matrix inequality (LMI) approach under the model parameter uncertainties and non-ideal grid environment. The control scheme is achieved by an enhanced prediction model rather than the conventional prediction model provided by fixed parameters to maintain the quality of grid currents injected into the grid when the model parameters are varied. Furthermore, an LMI-based observer is integrated with the disturbance observer to improve the reference tracking performance and reject disturbances. The proposed observer is employed for the grid frequency adaptive control without need of grid voltage sensors. The proposed current controller and observer employ the LMI scheme to maintain a stable and robust operation of the GCI. The discrete-time frequency response and pole-zero map analyses are used to investigate system stability and robustness against parameter uncertainties. Comprehensive simulation, experimental results and analyses clearly demonstrate the robustness of the proposed control scheme under various adverse test conditions with unexpected grid and system uncertainties.

Connected and Autonomous Vehicle (CAV) combines technologies of autonomous vehicle (AV) and connected vehicles (CV) to develop quicker, more reliable and safer traffic. Artificial Intelligence (AI) based CAV solutions play significant roles in sustainable city. The convergence imposes stringent security requirements for CAV safety and reliability. In practice, vehicles are developed with increased automation and connectivity. Increased automation increases the reliance on the sensor-based technologies and decreases the reliance on driver; increased connectivity increases the exposures of vehicles vulnerability and increases the risk for an adversary to implement a cyber-attack. Much work has been dedicated to identifying the security vulnerabilities and recommending mitigation techniques associated with different sensors, controllers, and connection mechanisms, respectively. However, there is an absence of comprehensive and in-depth studies to identify how the cyber-attacks exploit the vehicles vulnerabilities to negatively impact the performance and operations of CAV. In this survey, we set out to thoroughly review the security issues introduced by AV and CV technologies, analyze how the cyber-attacks impact the performance of CAV, and summarize the solutions correspondingly. The impact of cyber-attacks on the performance of CAV is elaborated from both viewpoints of intra-vehicle system and inter-vehicle system. We pointed out that securing the perception and operations of CAV would be the top requirement to enable CAV to be applied safely and reliably in practice. Also, we suggested to utilize cloud and new AI methods to defend against smart cyber-attacks on CAV.

Autonomous and cooperative vehicle systems represent a key priority in the automotive realm. Networked driving simulation can be utilized as a safe, cost-effective experimental replica of real traffic environments in order to support and accelerate the development of such systems. In networked driving simulation, different independent systems collaborate to achieve a common task: multi-driver traffic scenario simulation. Yet distinct system complexity levels are necessary to fulfill the requirements of various application scenarios, such as development of vehicle systems, analysis of driving behavior, and training of drivers. With myriad alternatives of available systems and components, developers of networked driving simulation are typically confronted with high design complexity. There are no systematic approaches to date for the design of networked driving simulation in accordance with the specific requirements of the concerned application scenarios. This paper presents a novel design method for networked driving simulation. The method consists mainly of a procedure model that is accompanied by a configuration software. The procedure model includes the necessary phases for the systematic design of application-oriented platforms for networked driving simulation. The configuration software embeds supportive decision-making processes that enable developers to apply the design method and easily create different system models. The design method was validated by generating system models and developing platforms of networked driving simulation for three different application scenarios.

Predicting and evaluating the vitality level of public spaces of urban design is crucial before new construction and renewal, especially for developing countries, to avoid failures like "ghost neighborhood" and reduce resource waste. However, existing assessment methods for the urban vitality are either static and ignore changes in the time dimension, or rely on historical big data and are unable to predict unbuilt projects. This study combines previous methods and crowds’ characteristics observation in public space, puts forward the crowd-frequency hypothesis and constructs an algorithm, and establishes a time-dimensional urban vitality dynamic prediction model. Taking the Rundle Mall neighborhood in Adelaide, Australia, as an example, the effec-tiveness of the prediction model was proved through on-site observation sampling comparative verification method. In addition, the decision tree model was used to conduct machine learning on the case data, and a set of algorithm programs were obtained that can directly input some basic information to obtain the urban vitality level (high-medium-low) in a certain period. It can be used as a tool to support the design and decision-making processes of urban planners and government officials, providing a low-cost way to achieve sustainable urban vitality construction of late-developing cities directly.

Development of new techniques of multimodal treatment, diagnostics of various neoplasms and improvement of these techniques can significantly increase the life expectancy of patients with carcinomas of the colon and abdominal cavity organs, since prevention of various side effects of radiation therapy is one of the main problems of oncological care. Electron irradiation is one of the most promising types of radiation therapy. There are no data on proliferation and apoptosis of the colon epithelium after irradiation with electrons, especially in different modes (single and summary). Aim of the study: Morphological evaluation of apoptosis and proliferation of colonic epithelium after local irradiation with electrons at doses 2 Gy and 25 Gy. Materials and methods. Colon fragments from sexually mature Wistar rats (n=50, body weight 200 ± 10 g) were divided into three groups: I - control (n = 10); II - experimental group (n = 20; local single electron irradiation at a dose of 2 Gy), III - experimental group (n=30), local fractional irradiation with electrons at a total dose of 25 Gy. They were studied by light microscopy using hematoxylin and eosin staining and immunohistochemical reactions with antibodies to Ki-67 and Cas3. Morphological disorders were accompanied by increased expression of pro-apoptotic molecules (caspase-3), and the period of regeneration by proliferative marker (Ki-67). Conclusions: Local fractional irradiation of the colon with electrons at a dose of 2 Gy and 25 Gy resulted in minor changes in the epithelium, a decrease in the number of goblet cells, but with preservation of regenerative potential, mild degenerative-dystrophic lesions. Intestinal crypts were damaged, leading to a decrease in Ki-67 and an increase in the number of caspase-3-positive epitheliocytes.

Hip joint surgeries, including total hip replacement or resurfacing, have increased tremendously in the last decades. Number of patients of all ages, replace their hip, due to severe injuries or trauma problems, so as to have a better life. According to these factors, new material and processes in implants manufacturing are imported to medicine, through research programs, every year. In the scope of one of these programs, that has to do with ceramic coatings on metallic resurfacing implants, a new 3axis Hip simulator was designed and manufactured in the Laboratory of Manufacturing Technology of the National Technical University of Athens. The scope of this paper is to present the main parts, materials and process used to manufacture the simulator as well as the way the simulator is working and how its movement in 3axis is accomplished. Furthermore, the evaluation of the machine and its use to examine resurfacing implants is presented.

Background: Cell-free plasma DNA (cfDNA) is composed of circulating extracellular DNA originating from apoptosis or cell necrosis. It is generally present in healthy individuals, but its levels increase in different clinical conditions, such as kidney disease, sepsis, myocardial infarction, trauma and cancer. Caspase-3 plays a central role in apoptosis, a mechanism of programmed cell death involved in the pathogenesis of chronic kidney disease (CKD). Methods: We compared cfDNA and caspase-3 levels in 25 CKD patients and in 10 healthy subjects, evaluating the modification of their concentrations according to CKD stage. We also analyzed the correlation between cfDNA and caspase-3 levels in CKD patients and the correlation between cfDNA and caspase-3 levels and creatinine and urea. Results: CfDNA and caspase-3 levels were higher in CKD patients compared to healthy subjects, in particular in patients with advanced renal disease. A positive correlation between cfDNA and caspase-3 levels and between cfDNA and caspase-3 and creatinine and urea was also observed. Conclusion: Patients with chronic kidney disease present higher levels of cfDNA and caspase-3 levels compared with healthy subjects. The worsening of renal damage and the increase in uremic toxin concentration are associated to higher levels of cfDNA and caspase-3 levels, thus reflecting a central role of apoptosis in the pathogenesis of CKD.

The elderly present age-related morphological and histological changes of the oral cavity; Literature displays many studies regarding the specific pathologies of the oral cavity in elderly patients, but no etiologically based classification is available. The aim of this study was to analyze the series of patients over 65 who were treated by our Unit of Pathology between 2020 and 2022 for a suspicion of oral lesion or for preventive dental evaluation (in anticipation of cardiac surgery, anti-resorptive drugs intake, chemotherapy, radiotherapy of the head-neck district or transplantation). The analysis was conducted by dividing oral lesions into 5 groups depending on the etiology: reactive, immunological, traumatic, benign and malignant degenerative. The sixth group consisted of patients undergoing preventive dental evaluation. The study included 435 patients; 91 of them were diagnosed with a reactive origin pathology, 174 with immunological origin pathology, 48 with traumatic pathology and 86 with degenerative pathology (42 benign and 44 malignant). 36 patients went to our Unit for preventive specialist evaluation. Oral health has a major impact on the daily life of the elderly; The examination of oral mucosa in geriatric patients is a fundamental diagnostic moment to report lesions early, thus allowing easier prevention and treatment.

Aim: Evaluation of role of supplementation of omega-3 polyunsaturated fatty acids on endothelial function in patients with metabolic syndrome. Methods: Total of 80 patients with metabolic syndrome were enrolled to two groups. We evaluated endothelial function in subjects before and after three-month treatment with omega-3 polyunsaturated fatty acids in dose 2.4g daily (800mg 3 times a day) vs placebo. Using the Endo-PAT2000 device (Itamar Medical Ltd. Caesarea, Israel), reactive hyperemia index – a parameter of endothelial function and augmentation index– a parameter of arterial stiffness were measured. Plasmatic level of glutation peroxidase, homocysteine, apolipoprotein B and lipoprotein (a) were also evaluated. Results: The average values of reactive hyperemia index before the treatment with n-3PUFA was 1.62 ± 0.42 , whereas 1.96 ± 0.62 at the end of the study (p<0.005). Augmentation index changed from 14.66 ± 19.55 to 9.21 ± 15.64 after the treatment (p=0.003). We also observed statistically significant decrease of apolipopotein B (0.94 ± 0.36 vs 1.13 ± 0.35, p = 0.001) and homocysteine (19.31 ± 5.29 vs. 13.78 ± 3.05, p = 0.001) and increase of the glutathion perxidase plasma levels (41.65 ± 8.90 vs. 45.20 ± 8.01), p=0.001. Conclusion: We have observed significant improvement of the endothelial function in subjects with metabolic syndrome treated with omega-3 polyunsaturated fatty acids in dose 2.4g daily.

This article presents an experimental approach to fatigue testing of cableway gondolas, carried out in accordance with the EN 13796-3 standard. Due to the limitations of the aforementioned regulations and the lack of clarity in their content, when designing and conducting fatigue tests of gondolas, there is a need to find solutions that meet the normative requirements, while ensuring the cost-effectiveness of the tests. The work presents the method of loading, receiving the degrees of freedom, the methodology of gondola strength verification, and additional suggestions allowing for the satisfactory preparation of a plan of fatigue tests and their implementation. The paper shows problems and ways to solve it, what may occur during cableway gondolas fatigue test design. The research object is a 6-seater gondola designed by TRANSSYSTEM S.A. with its registered office in Wola Dalsza (Poland).

After a long limbo, RNA has gained its credibility as a druggable target, fully earning its de-served role in the next-generation area of pharmaceutical R&D. We have recently probed the Trans-Activation Response element (TAR), a RNA stem–bulge–loop domain of the HIV-1 genome with bis-3-chloropiperidines (B-CePs), and revealed the compounds unique behavior in stabiliz-ing TAR structure, thus impairing in vitro the chaperone activity of the HIV-1 nucleocapsid (NC) protein. Seeking to elucidate the determinants of B-CePs inhibition, we have further characterized here their effects on the target TAR and its NC recognition, while developing quantitative analyti-cal approaches for the study of multicomponent RNA-based interactions.

We previously found increases in uncoupling protein (Ucp)-1 transcription in brown adipose tissue (BAT) of mice following a single oral dose of flavan 3-ols (FL), a fraction of catechins and procyanidins. It was confirmed that these changes were totally reduced by co-treatment of adrenaline blockers. According to these previous results, FL possibly activates sympathetic nervous system (SNS). In this study, we confirmed the marked increase in urinary catecholamine (CA) s projecting SNS activity following a single dose of 50 mg/kg FL. In addition, we examined the impact of the repeated administration of 50 mg/kg FL for 14 days on adipose tissues in mice. In BAT, FL tended to increase the level of Ucp-1 along with thermogenic transcriptome factors, such as peroxisome proliferator-activated receptor γ coactivator (PGC)-1α and PR domain-containing (PRDM)1. Transcription of browning markers, such as CD137 and transmembrane protein (TMEM) 26 in addition to PGC-1α were increased in epididymal adipose (eWAT) by FL. A multilocular morphology with cell size reduction was shown in the inguinal adipose (iWAT), together with increasing the level of Ucp-1 following administration of FL. These results suggest that FL produces browning in adipose through activation of the SNS.

Bioactive glass (BG) represents a promising biomaterial for bone healing; here injectable BG pastes biological properties were improved by 25 wt% gelatin or chitosan, as well as mechanical resistance was enhanced by adding 10 or 20 wt% 3-Glycidyloxypropyl trimethoxysilane (GPTMS) cross-linker. Composites exhibited bioactivity as apatite formation was observed by SEM and XRD after 14 days immersion in SBF; moreover, polymers did not enhance degradability as weight loss was &gt;10% after 30 days in physiological conditions. BG-gelatin-20 wt% GPTMS composites demonstrated the highest compressive strength (4.8±0.5 MPa) in comparison with 100% BG control (1.9±0.1 MPa). Cytocompatibility was demonstrated towards human mesenchymal stem cells (hMSC), osteoblasts progenitors and endothelial cells. The presence of 20 wt% GPTMS conferred antibacterial properties thus inhibiting the joint pathogens Staphylococcus aureus and Staphylococcus epidermidis infection. Finally, hMSC osteogenesis was successfully supported in a 3D model as demonstrated by alkaline phosphatase release and osteogenic genes expression.

Image fusion is a useful tool for producing a high-resolution multispectral image to be used for land use and land cover mapping. In this study, we use nine pansharpening algorithms namely Color Normalized (CN), Gram-Schmidt (GS), Hyperspherical Color Space (HCS), High Pass Filter (HPF), Nearest-Neighbor Diffusion (NND), Principal Component Analysis (PCA), Resolution Merge (RM), Stationary Wavelet Transform (SWT), and Wavelet Resolution Merge (WRM) to fusion Worldview-3 multispectral Bands and panchromatic band. In spectral and spatial fidelity, several image quality metrics are used to evaluate the performance of pansharpening algorithms. The SWT and PCA algorithms showed better results compared to other pansharpening algorithms while GS and CN algorithms showed the worst results for the original image fusion. The effect of fusion on each band was separately investigated and according to the calculations, we found that the CoastalBlue band and the Blue band showed the best result and the NIR-1 band and NIR-2 band show the worst result for the original image fusion. In the end, we conclude that the choice of fusion method depends on the requirement of remote sensing application.

Preeclampsia (PE) is a common pregnancy complication. It is associated with high maternal morbidity and mortality rates and intrauterine foetal growth restriction. This condition is characterised by high blood pressure and urinary protein levels. Apelin and galectin-3 (Gal- 3) are peptides involved in the regulation of body fluid homeostasis, inflammation and cardiovascular functions. This study aimed to determine the correlations amongst serum apelin and Gal-3 levels and insulin resistance (IR) in women with PE. Sixty patients with PE and 30 healthy controls participated in this study. The PE group had significantly lower apelin levels (p < 0.01) and higher Gal-3 levels (p < 0.05) than the control group. The PE group had higher serum glucose levels and β-cell functions than the control group. Moreover, patients with PE exhibited dyslipidaemia. Correlation analysis indicated that apelin and Gal-3 levels were not significantly correlated. Moreover, no correlation existed between the apelin levels and any measured parameters of the PE group. In conclusion, the elevations in serum Gal-3 levels with increments in IR-related parameters and lipid profiles reflect the possible contribution of Gal-3 to the harmful effects of IR and dyslipidemia levels on women with PE.

Bacterial indole-3-acetic acid (IAA), an effector molecule in microbial physiology, plays an important role in plant growth-promotion. Here, we comprehensively analyzed about 7282 prokaryotic genomes representing diverse bacterial phyla, combined with root-associated metagenomic data to unravel the distribution of tryptophan-dependent IAA synthesis pathways and to quantify the IAA synthesis-related genes in the plant root environments. We found that 82.2% of the analyzed bacterial genomes were potentially capable of synthesizing IAA from tryptophan (Trp) or intermediates. Interestingly, several phylogenetically diverse bacteria showed a preferential tendency to utilize different pathways and tryptamine and indole-3-pyruvate pathways are most prevalent in bacteria. About 45.3% of the studied genomes displayed multiple coexisting pathways, constituting complex IAA synthesis systems. Furthermore, root-associated metagenomic analyses revealed that rhizobacteria mainly synthesize IAA via IAM and tryptamine (TMP) pathways and might possess stronger IAA synthesis abilities than bacteria colonizing other environments. The obtained results refurbished our understanding of bacterial IAA synthesis pathways and provided a faster and less labor-intensive alternative to physiological screening based on genome collections. The better understanding of IAA synthesis among bacterial communities could maximize the utilization of bacterial IAA to augment the crop growth and physiological function.

Nowadays, network simulators are very useful to model a communications system. In this technical note we will focus in the creation of a new error model in NS-3 network simulator. This note describes the main steps to create or modify an Wi-Fi error model in this network simulator. In our case, we have created a new error model to included the approach of [1] to compute PER (Packet Error Rate) for vehicular environments.

We show that given a Lie superalgebra and an element of its dual space one can construct the 3-Lie superalgebra. We apply this approach to Lie superalgebra of (m,n)-block matrices taking supertrace of a matrix as the element of dual space. Then we also apply this approach to commutative superalgebra and the Lie superalgebra of its derivations to construct 3-Lie superalgebra. The graded Lie brackets are constructed by means of a derivation and involution of commutative superalgebra, and we use them to construct 3-Lie superalgebras.

Satellite altimeters have been used to monitor river and reservoir water levels, from which water storage estimates can be derived. Inland water altimetry can therefore play an important role in continental water resource management. Traditionally, satellite altimeters were designed to monitor homogeneous surfaces such as oceans or ice sheets, resulting in a poor performance over small inland water bodies due to the contribution from land contamination in the returned waveforms. The advent of synthetic aperture radar (SAR) altimetry (with its improved along-track spatial resolution) has enabled the measurement of inland water levels with a better accuracy and an increased spatial resolution. This paper presents three specialized algorithms or retrackers to retrieve water levels from SAR altimeter data over inland water bodies dedicated to minimizing land contamination from the waveforms. The performances of the proposed waveform portion selection method with three retrackers, namely, the threshold retracker, Offset Centre of Gravity (OCOG) retracker and 2-step physical-based retracker, are compared. Time series of water levels are retrieved for water bodies in the Ebro River basin (Spain). The results show good agreement with in situ measurements from the Ebro Reservoir (width is approximately 1.8 km) and Ribarroja Reservoir (width is approximately 400 m) with un-biased root-mean-square errors (RMSEs) of approximately 0.28 m and 0.16 m, respectively. The performances of all three retrackers are also compared with the European Space Agency’s ocean retracker in the Sentinel-3 Level-2 product.

This article utilized electrodeposition technology to fabricate Zn and Zn-Y₂O₃-Al₂O₃ composite coatings on Q235 steel plates. The composite coatings were obtained by adding Y₂O₃/Al₂O₃ nanoparticles (0, 5, 10, and 15 g/L) to acidic chloride solutions. This study then examined the impact of these nanoparticles on the microstructure, morphology, microhardness, hydrophobicity, and corrosion resistance of the composite coatings. The results indicate that the addition of the nanoparticles increased the nucleation sites on the surface of the coating, thereby refining the grain size and reducing the roughness of the coating surface. When 10g/L of Y₂O₃ and 10g/L of Al₂O₃ nanoparticles were added, the hardness of the composite coating (369 Hv) was 2.49 times higher than that of the pure Zn coating (148 Hv), which was attributed to the dispersion strengthening and grain refinement effects of the nanoparticles. The corrosion resistance of the Zn and Zn-Y₂O₃-Al₂O₃ composite coatings was studied using linear sweep voltammetry and AC impedance spectroscopy. The addition of the nanoparticles improved the corrosion resistance of the composite coating, and the composite coating prepared in an electrolyte containing 10 g/L of Y₂O₃ and 10 g/L of Al₂O₃ nanoparticles exhibited the best corrosion resistance. Meanwhile, the composite coating exhibited good hydrophobicity, with a contact angle of 120.9°, 1.94 times that of the pure Zn coating (62.2°). The Zn-Y₂O₃-Al₂O₃ nanocomposite coating material has significant potential advantages in the field of steel corrosion.

The evolutionary success of land plants largely relies on their ability to cope with constant environmental fluctuations, which negatively impact their reproductive fitness and trigger adaptational responses to biotic and abiotic stresses. In this challenging scenario, comprehensive research efforts so far aimed at depicting the roles of well-known phytohormones, mainly auxins, along with brassinosteroids, jasmonates, and abscisic acid, although the signaling networks coordinating the crosstalk among them remains vaguely understood. Accordingly, this review focuses on the Arabidopsis Amidase Signature (AS) superfamily members, highlighting the hitherto relatively underappreciated functions of AMIDASE1 (AMI1) and FATTY ACID AMIDE HYDROLASE (FAAH), as crucial coordinators of the growth-defense response trade-off by modulating auxin and ABA homeostasis.

Effects of the enzyme N-acetylgalactosamine-4-sulfatase (Arylsulfatase B, ARSB), which removes the 4-sulfate group at the non-reducing end of chondroitin 4-sulfate, on the expression of PD-L1 were determined and the underlying mechanism of PD-L1 expression elucidated. Initial experiments in human melanoma cells (A375) showed PD-L1 expression increased from 357 ± 31 to 796 ± 50 pg/mg protein (p

The ubiquitous presence of microplastics (MPs) in the environment poses a threat to ecosystems and increases concerns about their exposure to the human body. However, despite being consumed for health improvement, limited research has been conducted on MPs in functional foods. This study aimed to investigate the occurrence of MPs and the relation of the source of raw material or the manufacture in various omega-3 oil in the Korean market. MPs in omega-3 capsule and raw oil, sourced from both plant-based (PB) and animal-based (AB) sources, were investigated. We developed the method by direct filtration with acetone washing and analyzed MPs greater than 5 μm using microscope-Raman spectroscopy. The average number of MPs was found to be 1.2 ± 1.7 MPs/g for PB raw oil, 2.2 ± 1.7 MPs/g for AB raw oil, 3.5 ± 3.9 MPs/g for PB capsule oil, and 10.6 ± 8.9 MPs/g for AB capsule oil. Polypropylene and polyethylene terephthalate were major specious (83-95 %) found in omega-3 oil. The ratio of size range remained consistent across all groups, with a trend of higher detection rates as the size diminished. The results reveal that the main reason of MPs contamination is not the source of raw material but the manufacturing and packaging process for omega-3 oil.

Ovarian cysts are linked to hormone imbalances and altered gene expressions, but the connection between cysts and ion channel expression is understudied. This study explored the role of TWIK-related acid-sensitive K+ (TASK) channels in bovine ovarian cyst formation. The ovarian follicles were split into small (5 to 10 mm in diameter) and large (> 25 mm in diameter) groups. Among the measured K+, Na+, and Cl- concentrations in follicular fluid (FF) obtained from small-sized follicles (SF) and large-sized follicles (LF), the K+ concentration was significantly lower in LFFF. Quantitative PCR, western blot, and immunocytochemistry data revealed that TASK-3 expression levels significantly decreased by approximately 50% in both LF and granulosa cells obtained from LF (LFGCs) compared to the corresponding controls. The TASK-3 protein was localized to the plasma membrane of GCs. The diameter of LFGCs was larger than that of SFGC. The cell swelling response to exposure to a hypotonic solution (200 mOsm/L) was highly reduced in TASK-3-overexpressing cells compared to vector-transfected cells. TASK-3-knockdown cells showed arrested growth. Senescence markers were detected in LFGCs and TASK-3-knockdown cells. These findings suggest that reduced TASK-3 expression in LF is associated with the inhibition of GC growth, leading to senescence and cyst formation.

The historical and cultural use of food as a remedy for diseases is evident in societies, such as using Hibiscus sabdariffa to address conditions like hypertension and high blood glucose. The natural biocompounds in this plant, including Delphinidin-3-Sambubioside (DS3), Quercetin (QRC), and Hibiscus Acid (HA), have been linked to various health benefits. Despite individual attention, molecular targets for these compounds remain unclear. In this study, in-silico analysis employed bioinformatic tools; including Swiss Target Prediction, ShinnyGo 0.77, KEGG, and Stringdb, to identify molecular targets, pathways, and hub genes. A PubMed literature search complemented the results. DS3 demonstrated potential modifications in genes related to nitrogen and glucose metabolism, inflammation, angiogenesis, and cell proliferation, particularly affecting the PI3K-AKT pathway. QRC displayed interconnected targets across multiple pathways, with overlap with DS3 and a focus on cancer-related pathways. HA showed distinct targets, particularly associated with nervous system-related pathways. These findings highlight the need for targeted research on the molecular effects of DS3, QRC, and HA, providing valuable insights into potential therapeutic pathways.

Although conventional chemotherapeutic drugs are the first line of treatment for cancer, they have numerous side effects. One of the emerging challenges in cancer treatment is drug resistance. Nat-ural compounds have proven effective against various hallmarks of cancer for their multi-target inhibition properties, but especially for their ability to synergistically bypass low bioavailability. Methods: The present study investigated the in vivo antitumor effects of a combination of two natural dietary agents, epigallocatechin-3-gallate (EGCG) from Camelia Sinensis and curcumin, a component of turmeric (Curcuma longa). We aimed to compare, for the first time in vivo, the antiangiogenic and antitumor effects of sunitinib with the combination of curcumin and EGCG in a mouse model of renal cell carcinoma (ccRCC). It was shown that they are able to inhibit cell survival, proliferation of several type of cancer, including renal cell carcinoma (ccRCC), by mod-ulating different signaling pathways and that their combination respect to single compound syn-ergistically decreased angiogenesis. Results: Herein, we highlighted that these compounds inhib-ited the growth of xenografted renal cancer in nude mice by significant inhibition of tumor vol-ume, tumor weight and CD31 expression with no signs of hepatic toxicity. Moreover, mice treated with these natural compounds showed a significant reduction in angiogenesis and an improve-ment in survival rate with p<0.05. Finally, pretreatment of mice with a diet containing 0.6% curcumin before injection of tumor cells showed a significant inhibition of tumor engraftment in 60% of mice with respect to controls and other groups. Conclusions: Taken together, our data in-dicate, for the first time, that the combination of curcumin and EGCG acts in a synergistic manner to inhibit the growth and angiogenesis of ccRCC and with less toxicity than sunitinib and provide an important rationale for future clinical development for chemoprevention and treatment of re-nal cancer.

Due to the growing interest in biopolymers, biosynthesizable and biodegradable polymers currently occupy a special place. Unfortunately, the properties of native biopolymers are not satisfactory, which explain that attempts are being made to modify them. The work attempts to improve the properties of poly(3-hydroxybutyrate) (P3HB) using linear aliphatic polyurethane (PU) based on 1,4-butanediol and hexamethylene 1,6-diisocyanate. The conducted studies on the effect of the amount of PU used (5, 10, 15 and 20 wt.%) showed an improvement in the thermal properties of the prepared polymer blends. There was an increase in the degradation temperature of the ob-tained blends in relation to the native P3HB by 12-57C, and the difference between the melting point and the degradation point was above 100°C for most of the obtained blends. As part of the tested mechanical properties of the new polymer blends, we noted the desired increase in the tensile strength, in the relative elongation at break and in the impact strength with a decrease in hardness, in particular with the presence of 5 wt.% PU. Therefore, for further improvement, hybrid nanobiocomposites with 5 wt.% PU and organically modified montmorillonite (MMT – Cloisite 30B) were produced. The nanoadditive was used in typical amount of 1-3 wt.%. The nanostructure of the biocomposites produced by extrusion was examined by small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM), the morphology by scanning electron microscopy (SEM), and compatibility by infrared spectroscopy (FT IR). In addition, selected mechanical properties were determined and thermal properties were tested by the thermogravimetric analysis (TGA) and the standard differential scanning calorimetry (DSC). The polyester and polyurethane chains penetrated into the interlayer spaces of organically modi-fied nanoclay – Cloisite30B and the complete delamination occurred during direct mixing in the extrusion process. FT IR spectral analysis showed the compatibility of the polymer biocomposite components by the coexistence of intermolecular interactions in the form of hydrogen bonds. The morphology studies of the produced hybrid nanobiocomposites showed an interaction of the bi-opolymer matrix with PU and Cloisite30B and the formation of easily migrating polyester-polyurethane-montmorillonite adducts, which resulted in improved mechanical properties com-pared to the properties of the native P3HB and P3HB-PU compositions. The influence of the presence of a nanofiller on the properties of the prepared nanobiocomposites was tested and it was found that, as expected, the smallest amount of nanofiller provides the best results.It was found that the obtained nanobiocomposites containing the smallest amount of nano-fillers, i.e. 1 wt.% Cloisite30B exhibited the best mechanical and thermal properties. The desired decrease in hardness by 15% and a higher value of impact strength by 15%, an increase in elonga-tion at break by 60% and an increase in thermal stability of the newly produced biocomposites compared to to the native P3HB were observed. The prepared nanobiocomposites combined the best features caused by the elasticizing effect of polyurethane and the formation of P3HB-PU-MMT adducts.

Background: Prostate cancer remains a significant global health concern, and understanding the molecular drivers of this disease is crucial for developing effective diagnostic and therapeutic strategies. Steroid Receptor Coactivator-3 (SRC-3), a member of the SRC family, has emerged as a key player in prostate cancer pathogenesis. This review comprehensively examine the role of SRC-3 in prostate cancer, encompassing molecular mechanisms, clinical implications, and therapeutic opportunities. Methods: A systematic literature search following PRISMA guidelines was conducted in PubMed, PMC, and other relevant databases to identify studies that investigate SRC-3 in prostate cancer. A total of 67 articles were selected based on predetermined inclusion criteria. Results: 785 articles were retrieved from databases using specific keywords and MeSH terms related to SRC-3 and Prostate Cancer. After removing 461 duplicates, 260 articles were excluded based on title and abstract review. Subsequently, a comprehensive screening by three researchers resulted in 47 relevant articles for this systematic review. We summarize its contributions to AR-mediated transcriptional regulation, tumor growth, and metastasis. Evidence suggests that SRC-3 expression correlates with prostate cancer aggressiveness, disease recurrence, and poor patient outcomes. Its potential as a diagnostic biomarker and therapeutic target is explored, offering insights into personalized medicine approaches. Conclusions: SRC-3 plays a pivotal role in prostate cancer, influencing disease progression and clinical outcomes. Understanding the molecular intricacies of SRC-3 in prostate cancer offers new opportunities for precision medicine and innovative therapeutic approaches. This review provides a comprehensive overview of SRC-3's involvement in prostate cancer, emphasizing its clinical relevance and potential as a therapeutic target, ultimately contributing to improved patient care in the era of personalized oncology.

Background: Galectin-3 (Gal-3) is a biomarker involved in a wide range of diseases including cardiac remodeling following acute myocardial infarction (AMI). Identification of prognostic markers in patients with AMI can guide strategies towards improved survival and the quality of life. Methods: Our study included 59 patients with AMI and preserved ejection fraction. We determined the Gal-3 plasma concentration within 24 hours of chest pain onset from aortic root, femoral/radial artery, coronary sinus and cubital vein. Major adverse cardiovascular events (MACE) were evaluated at six months follow-up. Results: MACE at six months post-AMI was recorded in 20 patients (34%). The Gal-3 plasma concentration from aortic root and the femoral/radial artery were independent predictors of MACE at six months follow-up after the first AMI (OR 1.228; 95%CI: 1.011-1.491; p=0.038; OR 3.438; 95%CI: 1.275-9.265; p=0.015). ROC analysis identifies the Gal-3 plasma concentration from aortic root as a better predictor of MACE or death (cut-off &gt;10.86 ng/ml; AUC 0.858; 95%CI: 0.744-0.973; p&lt;0.001) than Gal-3 plasma concentration from femoral/radial artery (cut-off &gt;10.18 ng/ml; AUC 0.742; 95%CI: 0.596-0.888; p=0.006). Conclusion: The Gal-3 plasma concentration in patients with AMI determined during coronary angiography, especially from the aortic root, within 24 hours after chest pain onset is a valuable biomarker of prognosis at six months follow-up.

Cluster of differentiation 44 (CD44) promotes tumor progression through the recruitment of growth factors, and the acquisition of stemness, invasiveness, and drug resistance. CD44 has multiple isoforms including CD44 standard (CD44s) and CD44 variants (CD44v), which have common and unique functions in tumor development. Therefore, the elucidation of each CD44 isoform’s function in tumor is essential for the establishment of CD44-targeting tumor therapy. We have established various anti-CD44s and anti-CD44v monoclonal antibodies (mAbs) through immunization of CD44v3–10-overexpressed cells. In this study, we established C44Mab-6 (IgG1, kappa), which recognized the CD44 variant 3-encoded region (CD44v3) determined by enzyme-linked immunosorbent assay. C44Mab-6 reacted with CD44v3–10-overexpressed Chinese hamster ovary (CHO)-K1 cells (CHO/CD44v3–10) or some cancer cell lines (COLO205 and HSC-3) by flow cytometry. The apparent KD of C44Mab-6 for CHO/CD44v3–10, COLO205, and HSC-3 was 1.5 × 10−9 M, 6.3 × 10−9 M, and 1.9 × 10−9 M, respectively. C44Mab-6 could detect the CD44v3–10 in western blotting, and stained the formalin-fixed paraffin-embedded tumor sections in immunohistochemistry. These results indicate that C44Mab-6 is useful for detecting CD44v3 in various experiments, and expected for the application of tumor diagnosis and therapy.

The traditional nomenclature system for classifying Antineutrophil cytoplasmic antibody (ANCA)-associated vasculitides (AAV), based on clinical phenotype, described Granulomatosis with Polyangiitis (GPA), Eosinophilic Granulomatosis with Polyangiitis (EGPA) and Microscopic Polyangiitis (MPA) as distinct clinical entities. This classification has proved its expedience in clinical trials and every day clinical practice, yet, a substantial overlap in clinical presentation still exists, and often causes difficulties in prompt definition and clinical distinction. Additionally, new insights into the AAV pathogenesis point out that PR3 and MPO-AAV may not represent expressions of the same disease spectrum but rather two distinct disorders, as they display significant differences. Thus, it is supported that a classification based on ANCA serotype (PR3-ANCA, MPO-ANCA or ANCA-negative), could be more accurate and also closer to the nature of the disease, instead of the phenotype-based one. This review aims to elucidate the major differences between PR3 and MPO-AAV, in terms of epidemiology, pathogenesis, histological and clinical manifestations, and response to therapeutic approaches.

The taxonomy of trilobites Abadiella Hupé, 1953 and Parabadiella Zhang, 1966 from the lower Cambrian of Gondwana has long been a controversy. Based on newly-collected and formerly-reported materials, 94 trilobite cranidia within 21 species are selected for morphometric analyses: principal components analysis (PCA) and canonical variates analysis (CVA). The integrated morphological characters are successfully accounted for by two principal components in PCA. The further validations for the presupposed qualitative groupings are indispensable to detect and calibrate the ultimate taxonomic results in CVA. By this way, all specimens distributed in a consistent morphospace in PCA and the short distances between them demonstrate their close morphological affinity, supporting their congeneric status within Abadiella. Additionally, three morphotypes were recognized from all selected specimens and they were eventually revised and incorporated into A. bourgini Hupé, 1953, A. huoi Zhang, 1966, and A. yunnanensis Luo, 1981, through stepwise test-calibration to get a high correct rate as far as possible in CVA. From this, it is certain that A. huoi is conspecific in South Australia and South China. Its occurrence allows to correlate the Australian A. huoi Range Zone to the identical zone in South China (in platform), having an approximately consistent stratigraphic range in the two regions. In comparison with A. huoi, A. bourgini was reported from fewer localities in South China. Nevertheless, its presence in the Daguinaspis Zone of Issendalenian Stage in Morocco permits a correlation with Chinese and Australian A. huoi Zone. As an auxiliary marker for A. huoi, the occurrence of A. bourgini in Morocco, South Australia and South China reinforce the correlation potential and resolution in species-level for the Cambrian Stage 3 in Gondwana region.